Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SEED”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

A study of seeded rotating arcs.

Neutral carrier gas and slightly ionized plasma binary mixture model for nonhomogeneous seeding effects on rotating arc performance

ROTATING FLUID↗

The SEEDS Direct Imaging Survey for Planets and Scattered Dust Emission in Debris Disk Systems

Debris disks around young main-sequence stars often have gaps and cavities which for a long time have been interpreted as possibly being caused by planets. In recent years, several giant planet discoveries have been made in systems hosting disks of precisely this nature, further implying that interactions with planets could be a common cause of such disk structures. As part of the SEEDS high-contrast imaging survey, we are surveying a population of debris disk-hosting stars with gaps and cavities implied by their spectral energy distributions, in order to attempt to spatially resolve the disk as well as to detect any planets that may be responsible for the disk structure. Here we report on intermediate results from this survey. Five debris disks have been spatially resolved, and a number of faint point sources have been discovered, most of which have been tested for common proper motion, which in each case has excluded physical companionship with the target stars. From the detection limits of the 50 targets that have been observed, we find that beta Pic b-like planets (approximately 10M(sub jup) planets around G-A-type stars) near the gap edges are less frequent than 15-30%, implying that if giant planets are the dominant cause of these wide (27 AU on average) gaps, they are generally less massive than beta Pic b.

high-contrast imaging↗

Commercial Seed Selection and Effectiveness of Sanitization Methods in Preparation for Plant Growth Experiments on the International Space Station

A closed-loop food production system will be important to gain autonomy on long duration space missions. Crop growth experiments in the Veggie plant chamber aboard the International Space Station (ISS) are helping to identify methods and limitations of food production in space. Prior to flight, seeds are surface sterilized to reduce environmental and crew contamination risks.

crop selection↗

DEFECT SELECTIVE ETCHING OF THICK ALN LAYERS GROWN ON 6H-SIC SEEDS - A TRANSMISSION ELECTRON MICROSCOPY STUDY

In the present study, the type and densities of defects in AlN crystals grown on 6H-SiC seeds by the sublimation-recombination method were assessed. The positions of the defects in AlN were first identified by defect selective etching (DSE) in molten NaOH-KOH at 400 C for 2 minutes. Etching produced pits of three different sizes: 1.77 m, 2.35 m , and 2.86 m. The etch pits were either aligned together forming a sub-grain boundary or randomly distributed. The smaller etch pits were either isolated or associated with larger etch pits. After preparing crosssections of the pits by the focused ion beam (FIB) technique, transmission electron microscopy (TEM) was performed to determine which dislocation type (edge, mixed or screw) produced a specific etch pit sizes. Preliminary TEM bright field and dark field study using different zone axes and diffraction vectors indicates an edge dislocation with a Burgers vector 1/3[1120] is associated with the smallest etch pit size.

36 MATERIALS SCIENCE↗

SEED BANKS FOR MAGNETIC FLUX COMPRESSION GENERATORS

In recent years the Lawrence Livermore National Laboratory (LLNL) has been conducting experiments that require pulsed high currents to be delivered into inductive loads. The loads fall into two categories (1) pulsed high field magnets and (2) the input stage of Magnetic Flux Compression Generators (MFCG). Three capacitor banks of increasing energy storage and controls sophistication have been designed and constructed to drive these loads. One bank was developed for the magnet driving application (20kV {approx} 30kJ maximum stored energy.) Two banks where constructed as MFCG seed banks (12kV {approx} 43kJ and 26kV {approx} 450kJ). This paper will describe the design of each bank including switching, controls, circuit protection and safety.

42 ENGINEERING↗

Preliminary Results of the Echo-Seeding Experiment ECHO-7 at SLAC

ECHO-7 is a proof-of-principle echo-enabled harmonic generation FEL experiment in the Next Linear Collider Test Accelerator (NLCTA) at SLAC. The experiment aims to generate coherent radiation at 318 nm and 227 nm, which are the 5th and 7th harmonic of the infrared seed laser. In this paper we present the preliminary results from the commissioning run of the completed experimental setup which started in April 2010.

43 PARTICLE ACCELERATORS↗

Preliminary results of the echo-seeding experiment at SLAC

ECHO-7 is a proof-of-principle echo-enabled harmonic generation FEL experiment in the Next Linear Collider Test Accelerator (NLCTA) at SLAC. The experiment aims to generate coherent radiation at 318 nm and 227 nm, which are the 5th and 7th harmonic of the infrared seed laser. In this paper we present the preliminary results from the commissioning run of the completed experimental setup which started in April 2010.

43 PARTICLE ACCELERATORS↗

Short Wavelength Seeding through Compression for Fee Electron Lasers

In this paper, we propose a seeding scheme that compresses an initial laser modulation in the longitudinal phase space of an electron beam by using two opposite sign bunch compressors and two opposite sign energy chirpers. This scheme could potentially reduce the initial modulation wavelength by a factor of C and increase the energy modulation amplitude by a factor of C , where Cis the compression factor of the first bunch compressor. Using two lasers as energy chirpers, such a modulation compression scheme can generate kilo-Ampershort wavelength current modulation with significant bunching factor from an initial a few tens Amper current. This compression scheme can also be used togenerate a prebunched single atto-second short wavelength current modulation and prebunched two color, two atto-second modulations.

43 PARTICLE ACCELERATORS↗

Source and seed populations for relativistic electrons: Their roles in radiation belt changes

Strong enhancements of outer Van Allen belt electrons have been shown to have a clear dependence on solar wind speed and on the duration of southward interplanetary magnetic field. However, individual case study analyses also have demonstrated that many geomagnetic storms produce little in the way of outer belt enhancements and, in fact, may produce substantial losses of relativistic electrons. In this study, focused upon a key period in August–September 2014, we use GOES geostationary orbit electron flux data and Van Allen Probes particle and fields data to study the process of radiation belt electron acceleration. One particular interval, 13–22 September, initiated by a short-lived geomagnetic storm and characterized by a long period of primarily northward interplanetary magnetic field (IMF), showed strong depletion of relativistic electrons (including an unprecedented observation of long-lasting depletion at geostationary orbit) while an immediately preceding, and another immediately subsequent, storm showed strong radiation belt enhancement. We demonstrate with these data that two distinct electron populations resulting from magnetospheric substorm activity are crucial elements in the ultimate acceleration of highly relativistic electrons in the outer belt: the source population (tens of keV) that give rise to VLF wave growth and the seed population (hundreds of keV) that are, in turn, accelerated through VLF wave interactions to much higher energies. ULF waves may also play a role by either inhibiting or enhancing this process through radial diffusion effects. Furthermore, if any components of the inner magnetospheric accelerator happen to be absent, the relativistic radiation belt enhancement fails to materialize.

58 GEOSCIENCES↗

Rotation of Crystal Seed During Early Stages of Growth Reveals the Anisotropy of Glass Matrix

Glass-ceramics are a highly valuable class of materials that are needed for realizing many high-tech as well as consumer products. They are made by controlling crystallization of glass. Theoretical atomistic insights obtained using molecular dynamics simulations in this work reveal that crystal seeds can spontaneously rotate within glass at high temperatures due to anisotropic forces at the glass-crystal interface. This rotation challenges the long‐held view of glass as isotropic solid, and highlights how atomic‐scale inhomogeneities influence crystal growth and microstructure, hence the physical properties glass‐ceramics.

36 MATERIALS SCIENCE↗

Broccoli seed extract rich in polysaccharides and glucoraphanin ameliorates DSS ‐induced colitis via intestinal barrier protection and gut microbiota modulation in mice

Abstract BACKGROUND Broccoli has received widespread attention because of its anti‐inflammatory and antioxidant effects. The present study aimed to explore the composition of broccoli seed extract (BSE) and its effect on colitis induced by dextran sulfate sodium (DSS). RESULTS BSE mainly comprises glucoraphanin and polysaccharides composed of arabinose, galactose, glucose and mannose. Animal experiments suggested that BSE intervention effectively reversed body weight loss, suppressed the levels of proinflammatory interleukin‐6, tumor necrosis factor‐α and interleukin‐1β, and elevated the levels of anti‐inflammatory interleukin‐10 and the activities of superoxide dismutase and glutathione in DSS‐induced colitis mice. According to histopathologic and immunohistochemical analysis of colon tissue, BSE intervention may repair the intestinal barrier by upregulating mRNA levels and the expression of tight junction proteins (claudin‐1, occludin and zonula occludens‐1). Gas chromatography–mass spectrometry (MS) analysis demonstrated that cecal short‐chain fatty acids in mice with BSE administration were significantly increased compared with the model group. Sulforaphane and sulforaphane‐ N ‐acetylcysteine were only detected in BSE group mice by ultra‐performance liquid chromatography‐MS analysis. In addition, BSE intervention evidently increased the abundance of Alistipeds , Coriobacteriaceae UCG‐002 and Bifidobacterium and decreased the abundance of Escheichia‐Shinella , Lachnospiraceae others , Parabacteroides , Ruminococcaceae others and Turicibacter , which possibly promoted carbohydrate metabolism and short‐chain fatty acid production. CONCLUSION The present study aimed to elucidate the effect of BSE on colitis and found that BSE, as a novel food ingredient, has great potential for the improvement of colitis. © 2022 Society of Chemical Industry.

Wu, Jiaying↗

Seed‐Assisted Growth for Scalable and Efficient Perovskite Solar Modules

Perovskite solar modules (PSMs) have shown remarkable photovoltaic potentials, but they still suffer from large power conversion efficiency (PCE) loss on scale‐up and instability due to inferior uniformity and crystallization over large areas. Herein, the scalable production of efficient and stable PSMs using a suite of all‐scalable fabrication methods featuring a two‐step blade/dip‐coating approach to deposit the perovskite absorber layer is demonstrated. Rubidium chloride is introduced to embed (PbI 2 ) 2 RbCl complex seeds in the first‐deposited PbI 2 precursor, which assists in uniform crystallization of the perovskite layer with high crystallinity and reduced defect density over large areas. Following the optimization of RbCl additives, a champion PSM with 17.9% PCE on a 7.6 × 7.6 cm 2 substrate with a 37 cm 2 aperture area is achieved. Moreover, the RbCl‐incorporated PSMs demonstrate excellent reproducibility and stability under continuous 1 sun illumination. This work shows that the two‐step blade/dip coating is a promising method for producing high‐efficiency and stable PSMs on an industrially relevant scale.

Energy & Fuels↗

Arabic Gum as Bio-Synthesizer for Ag–Au Bimetallic Nanocomposite Using Seed-Mediated Growth Technique and Its Biological Efficacy

Bio-synthesis of nanostructures is an ever green approach; therefore, the current work attempts to use Arabic gum as bio-synthesizer for manufacturing Ag–Au bimetallic nanocomposite, using seed-mediated growth technique. The relevance of the as-used natural gums for manufacturing of Ag–Au nanocomposite in quite simple, energy saving and cost effective methodology, has been successfully approved. Arabic gum acted concurrently as a reducer for metal ions to nano-sized structures and crystal growth modifier of the so-generated nanocomposite. Monitoring of interchanging in size distribution of the as-produced bimetallic nanocomposite by the effect of the gum concentration, concentration of nanometals precursors, their addition sequencing in reaction liquor, and reaction temperature, was illustrated and well characterized. UV–Visible spectra showed that the characteristic surface plasmon resonance peak for Ag–Au bimetallic nanocomposite was observed at 480–495 nm and XRD patterns confirmed the preparation of bimetallic nanostructures. According to zetasizer analyses and TEM micrographs, small sized (3.1 nm) Ag–Au bimetallic nanocomposite with narrow size distribution (1–7 nm) were obtained. The all prepared bimetallic nanocomposite showed good stability with polydispersity index ranged in 0.203–0.530. The mechanism of nanostructures’ generation was suggested and approved using FT-IR, 1HNMR and 13CNMR spectra. The prepared Ag–Au bimetallic nanocomposites showed excellent antibacterial activity against both of gram + ve and gram − ve strains.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Optimization of the Dy Content in Single Crystalline GdBCO Bulk Superconductors Fabricated in Air Via Top-Seeded Infiltration Growth Process

Single-crystalline bulk GdBa{sub 2}Cu{sub 3}O{sub 7−δ} (GdBCO) superconductors were fabricated with top-seeded infiltration-growth technique (TSIG) in air by adding the different amounts of Dy{sub 2}BaCuO{sub 5} (Dy-211) particles (5, 10, 15, 20, 25, 30, 35, and 40 wt%). All the samples show superconducting critical temperature at ∼93 K with sharp transition irrespective of the chemical composition. X-ray diffraction measurements confirmed that all the samples were single domain with high alignment. Microstructural studies through scanning electron microscopy showed that TSIG-processed GdBCO samples contained 211 phase particles of two different sizes, i.e., ∼2–4 and ∼10 μ m. The addition of Dy-211 phase particles led to a significant enhancement of critical current density (J{sub c}) at 77 K. GdBCO superconductor with the addition of 20 wt% of Dy-211 showed the highest J{sub c} of 45.5 kA/cm {sup 2} at 77 K and self field.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Superconducting Performance, Structure, Microstructure, and Trapped Field of Top-Seeded Melt-Processed Bulk Y{sub 3}Ba{sub 5}Cu{sub 8}O{sub x}

The sintering temperature for the production of Y{sub 3}Ba{sub 5}Cu{sub 8}O{sub 18} (Y-358) preform powders synthesized in sol-gel spontaneous combustion technique was optimized. A large single-grain bulk Y-358 crystal was fabricated employing a top-seeded melt-growth technique utilizing the optimally sintered preform powders (i.e., at 900 {sup ∘}C for 12 h). Structural, microstructural, elemental, and magnetic properties were investigated by means of X-ray diffraction, scanning electron microscopy, and SQUID, respectively. The structural characterization indicated that the sample is highly textured in (00l) direction. The Y-358 phase fractions were estimated in both preform powders and bulk sample using Rietveld refinement. The onset of superconducting transition is observed at 92.5 K, and the curve is very sharp indicative of the high quality of the produced bulk sample. The field dependence of critical current density (J{sub c}) was determined at 77 K, and the self-field J{sub c} was found to be ∼26 kA/cm{sup 2}. A magnetic field of 0.27 T was trapped by the sample at 77 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

QTL Mapping of Seed Fatty Acid Contents in Camelina sativa Under Heat Stress

Heat stress alters oil quality in oilseed crops, yet its genetic underpinnings in Camelina sativa remain unclear. This study investigated the genetic basis of heat-induced changes in seed fatty acids using a recombinant inbred line (RIL) population derived from a cross between two camelina varieties, Suneson and Pryzeth. Exposure to high temperature during reproductive growth led to increased proportions of saturated (C16:0, C18:0) and monounsaturated (C18:1) fatty acids, whereas polyunsaturated C18:3, total unsaturated fatty acids (UFA) and the PUFA/MUFA ratio were decreased, suggesting an inhibition of the C18:1 → C18:2 → C18:3 desaturation pathway. A high-density linkage map (4981 bins across 20 chromosomes) was built, and 25 QTLs for fatty acids were detected, with hotspots on chromosomes 1, 9, 12, 13, 16, and 20. A major QTL on chromosome 1 (~ 80 cM) explained the largest variance component for PUFA/MUFA under heat. Three desaturase genes (FAD2, FAD7, FAD8) were located within key QTL intervals, nominating them as candidates for modulating unsaturation under elevated temperature. These results provide a genetic basis for fine mapping and functional validation, supporting future molecular and breeding efforts to stabilize oil quality under warming conditions.

Camelina↗

Transient Rheological Behavior of Semisolid SEED-Processed 7075 Aluminum Alloys in Rapid Compression

The transient rheological behavior and microstructure evolution of semisolid SEED-processed 7075 aluminum alloys were studied using the rapid compression tests. The effects of the TiB{sub 2} grain refinement on the grain morphology and size of semisolid slurries were investigated. Results indicated that the grain refiner could reduce the grain size and improve the globularity of α-Al grains. The grain-refined alloy can be easily deformed at a wide range of solid contents (0.42 to 0.53 Fs), in which the deformation level appears to be independent from the solid content. Under the transient state, the apparent viscosity decreased with increasing shear rate to a minimum value and followed by an increase as the shear rate decreased. The apparent viscosity of the base alloy exhibited a dependency on the solid content, while the apparent viscosity of the grain-refined alloy in the decreasing or increasing shear rate periods was not substantially influenced by the solid content. The viscosity as a function of applied shear rate can be described using the power law viscosity model. The differences in the flow behavior index (n) and the consistency index (k) for two alloys were discussed.

36 MATERIALS SCIENCE↗