Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SATURATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

Growth and Saturation of Ion Acoustic Waves in Hall Thrusters

In this paper we present for the first time a conjecture that the electron transport in Hall thrusters is controlled by ion acoustic waves in two distinct ion populations. The first, and largest population, is the main beam, an ion fluid generated upstream of the Acceleration Region. These ions experience electrons with largest ExB drift, but because beam ions have been heated during the ionization process, Landau damping limits the growth of ion acoustic waves. The second population is composed of ions generated at low potentials farther downstream that don’t thermalize with the fast moving ion beam. The existence of this separate population has been recognized for decades as the source of the high angle ions in Hall thruster plumes. Because these ions aren’t heated and have velocities much different from main beam ions, the amplitude of ion acoustic waves in this population is not Landau damped and grows to saturation. Scattering from these waves reduces the Hall parameter in the near plume where slow ions make up a significant fraction of the population.

Katz, Ira↗
NASA NTRS2019

Near-Saturation Conditions at the Tropical Tropopause: Results from Ticosonde

The TTL lies between the neutral buoyancy level (NBL) at ~350 K and the tropopause. Within the the TTL radiative heating drives ascent and air parcel supersaturation. Ticosonde measurements since 2005 show that the incidence ofsupersaturation in the TTL over Costa Rica is ~60%. This is due to diabatic ascent. The frequency is highest (68%) in summer, when convection is frequent. The TSL was defined by Selkirk et al. (2010) as the upper edge of the TTL. It isIn this layer that the final saturation of air parcels rising into the stratosphere occurs and thus the water vapor minima which define the so-called "writehead" of the Atmospheric Tape Recorder.

Selkirk, Henry↗
NASA NTRS2021

Predicting near-saturated hydraulic conductivity in urban soils

Pedotransfer functions (PTFs) provide point predictions of soil hydraulic properties from more readily measured soil characteristics, yet uncertainties and biases in measurement methods, sampling distributions, and boundary conditions can limit accuracy when estimating near-saturated hydraulic conductivity (K(n)). These limitations may be particularly problematic in understudied urban landscapes that often contain altered hydraulic properties. To better treat deficiencies in PTF performance, we addressed three objectives, which were to: 1) develop PTFs to predict urban K(n), 2) assess bulk density and coarse fragments as explanatory variables; and 3) evaluate the predictive capability of these PTFs by comparing their output to measured hydraulic conductivity values from three other studies of urban soil hydraulics. We used artificial neural networks (ANN) and random forest (RF) approaches to predict urban K(n), with the training dataset including 307 tension infiltrometer tests and other measurements drawn from urban soil assessments in 11 U.S. cities. The PTFs utilized a hierarchy of inputs, starting with percentage sand, silt, clay, and then adding percentage coarse fragments and bulk density. The ANN models performed similar to the RF models, and all models exhibited similar or better predictive performance as models results collected from published articles. The inclusion of bulk density or coarse fragments did not improve accuracy over soil texture alone. Possible reasons for this result include low correlation between K(n) and bulk density and the exclusion of large voids during flow measurements with tension infiltrometers. The models have been made available as an open-source software package to encourage adoption by users working in urban systems.

Jinshi Jian↗
NASA NTRS2022

Investigation of the Potential Saturation of Information from Global Navigation Satellite System Radio Occultation Observations with an Observing System Simulation Experiment

The potential impact of large numbers of Global Navigation Satellite System radio occultation (GNSS-RO) observations on numerical weather prediction is investigated using a global observing system simulation experiment (OSSE). The hybrid four-dimensional ensemble variational Gridpoint Statistical Interpolation (GSI) data assimilation system and Global Earth Observing System (GEOS) model are used to ingest up to 100,000 GNSS-RO soundings per day in addition to the current suite of conventional and radiance data. Analysis quality, forecast skill, and forecast sensitivity to observation impact are examined with differing quantities of additional GNSS-RO profiles. It is found that saturation of information from additional RO soundings has not been reached with 100,000 soundings per day. There are some indications of suboptimal performance of the GSI in handling GNSS-RO observations particularly in the middle and lower tropospheric extratropics.

GNSS-RO↗
NASA NTRS2020

A Regional L-band High Biomass Estimation Framework Leveraging Spaceborne Lidar and Interferometric Data to Overcome Backscatter Saturation

We propose a framework to estimate high above ground biomass (AGB) from L-band SAR imagery leveraging spaceborne lidars such as GEDI or ICESat-2 and repeat-pass coherence. Our results indicate we are able to overcome model saturation typically associated with purely backscatter methodologies. We validate our approach using lidar-derived AGB maps from the AfriSAR datasets at Mondah, Ogooue, and Lope. We apply our framework to UAVSAR and ALOS- 2 imagery to obtain 50 meter resolution biomass maps. We obtain < 60% nRMSE (in some cases much better) with negligible relative bias using a multiscale random forest model. We illustrate that the inclusion of coherence can significantly improve high AGB estimation particularly at the coastal site Mondah.

Liao, Tien-hao↗
NASA NTRSDate not supplied

Results of a 3-day Pilot Study to Validate Planetary Prebreathe Protocols Using a 56.5 kPa 34% O2, 66% N2 Saturation Cabin Atmosphere

INTRODUCTION: Apollo missions used 100% O2 cabin atmospheres which effectively eliminated the risk of decompression sickness (DCS) during extravehicular activities (EVAs, ‘spacewalks’); however, this atmosphere presented a flammability risk that is no longer acceptable to NASA. Denitrogenation prebreathe protocols used to mitigate DCS risk for Space Shuttle and International Space Station EVAs are validated for the microgravity environment, but the significantly increased risk of DCS during equivalent ambulatory surface EVAs make these protocols inapplicable to planetary/Lunar missions. An “exploration atmosphere” of 56.5 kPa (8.2 psia), 34% O2, 66% N2 has been recommended by NASA for future Moon and Mars missions as a compromise that balances subsequent pre-EVA prebreathe duration, hypoxia, and flammability risk, assuming a 29.6 kPa (4.3 psi) spacesuit. Prebreathe validation studies was initiated utilizing a three-story 6m diameter hypobaric chamber at NASA’s Johnson Space Center. Here, we report the results of a 3-day human-in-the-loop system checkout. METHODS: Six volunteers acclimated to the 56.6kPa/34% O2 66% N2 environment for 48hrs prior to conducting a 20-minute prebreathe and a 6-hour simulated EVA at 34kPa/85% O2 / 15% N2. The EVA simulation was designed to include tasks that are physically and ergonomically representative of future planetary EVAs. Decompression stress was evaluated by serial doppler and echocardiographs, as well as by clinical features of DCS signs/symptoms. RESULTS AND DISCUSSION: Preliminary data analysis noted venous gas emboli (VGE) in 3 of 6 subjects, with peak Grade II VGE by Doppler and peak E-B score of 5 by cardiac ultrasonography. No volunteers were diagnosed with DCS during this initial test. No acute hypoxic symptoms were noted. Musculoskeletal and gastrointestinal complaints were noted, likely associated with the exercise load and the food system. Validation of exploration prebreathe protocols has since been initiated with an 11-day saturation test using the same facility and protocol.

Alejandro Garbino↗
DOE OSTI2014

ADS genes for reducing saturated fatty acid levels in seed oils

The present invention relates to enzymes involved in lipid metabolism. In particular, the present invention provides coding sequences for Arabidopsis Desaturases (ADS), the encoded ADS polypeptides, and methods for using the sequences and encoded polypeptides, where such methods include decreasing and increasing saturated fatty acid content in plant seed oils.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2017

Sorption Behavior of Iodide Ions on Calcium Silicate Hydrate Formed under the Condition Saturated with Saline Water - 17069

The sorption behavior of iodide ions on calcium-silicate-hydrate (CSH gel) under the condition saturated with saline water was examined by using a Raman spectroscopy and ICP-AES, without drying process. In the sorption experiments, I-127 is a stable isotope was used as an alternative of I-129. CSH gel was synthesized with mixing CaO, SiO{sub 2}, and NaCl solution. The Ca/Si molar ratios of CSH gel were set to 0.4, 0.8, 1.2 and 1.6, and the concentration of NaCl solution was set to 0.6 M for simulating the condition of saline groundwater. The liquid/solid weight ratios of CSH gel were set to 10, 13, 15, 17, and 20, and the total weight of solid phase was 1.5 g. Furthermore, at the preparation of CSH gel, the substance of iodide ions in each sample was adjusted to 15 μmol. The synthesis procedure for all samples was conducted in a glove bag filled with nitrogen gas. The curing period was 7, 14, 30, and 60 days at a room temperature (298 K) with shaking at 120 strokes/min. The results of the sorption experiments, iodide ions adsorbed on CSH gel regardless of the high concentration of NaCl. The concentration of iodide ions in liquid phase was equal to the initial one under all experimental conditions. Moreover, the distribution coefficients, K{sub d}, were kept constant (K{sub d} = 1 mL/g) after 14 days. In the results of Raman analysis, the structure of CSH gel was scarcely influenced by incorporating iodide ions from the viewpoint of the silicate chain. These results suggest that iodide ions will be incorporated into CSH gel with the hydration water without changing its structure. Such effect of CSH gel formed with leaching cementitious constituents around the repository may retard the migration of radionuclide (I-129) in the natural barrier of the radioactive waste disposal system. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

Enhancing Fluid Flow Pressure and Saturation Prediction Accuracy and Reducing Uncertainty with Committee Machine – Illinois Basin Decatur Project (IBDP) as a Case Study

This is the conference paper accompanying an oral presentation at the 17th International Conference on Greenhouse Gas Control Technologies GHGT-17 held in Calgary, Canada, October 20-24, 2024. Carbon capture and storage (CCS) is a way to play a critical role in the global transition to a low-emission economy. Current progress is hampered by a number of factors, among which the lack of risk-informed design tools and decision support frameworks is seen as a major roadblock. Significant interest exists in using artificial intelligence to accelerate CCS site feasibility studies, as well as to facilitate the permit application process. Existing works commonly train a single deep learning model. This work investigates the feasibility of using a conventional ensemble learning (committee machine) technique to further improve prediction accuracy. Ensemble-based algorithms generally improve over individual base learners in terms of robustness and accuracy. Deep ensembles, however, are time-consuming to create and train. A pragmatic question is whether small-sized ensembles may lead to prediction improvement. Here we evaluated the efficacy of an ensemble learning technique using the latent spectral model (LSM), an efficient deep neural operator algorithm, as base learners. Preliminary results, obtained using the Illinois Basin-Decatur Project (IBDP) carbon sequestration data/model, show that small-sized ensembles can improve prediction over the base learners, achieving prediction accuracy of ~1.6 psi root mean square error (RMSE) on pressure (relative the average reservoir pressure of 3150 psi), and less than 1.3% for saturation.

Sun, Alexander↗
DOE OSTI2024

Numerical Analysis of Water Harvesting from Saturated Vapor with the Electrospray Water Droplet Injection in The Solar-Driven Desalination Applications

Solar-driven seawater desalination systems provide freshwater through environmentally friendly and carbon-neutral processes. Air humidification and dehumidification desalination (HDD) systems extract water directly from moist air. This paper focuses on a new solar-driven seawater desalination system that shares some common traits with HDD systems but in which the air is eliminated from the process. Seawater is vaporized by solar thermal radiation in high-performance solar panels. Water vapor flows to a new electro-condensation chamber and passes through a series of electrosprays, which inject small nuclei of freshwater droplets into the vapor clouds. Here, due to dielectrophoresis and electrohydrodynamic flows, the vapor molecules are captured by the charged droplets, and vapor is condensed at the droplet surface. The water vapor condensation was modeled by using the multiphase flow numerical model. The CFD model, which was also experimentally validated, used SprayFoam solver modules available in the Open FOAM® CFD open-source software. In preliminary results, 802 grams/(hr-m2) (grams per hour per unit area) of water was harvested directly from moist air at 24C and 90% relative humidity. The simulation results indicated that freshwater productivity could increase up to 4,000 grams/(hr-m2) for fully saturated air conditions. This represents about 5 times the water productivity rate of current conventional HDD systems today. In addition, energy consumption could be reduced by 80 percent compared to conventional HDD systems.

Electrospray, electro-condensation, solar, droplet↗
DOE OSTI2018

Reducing Saturation-Current Density to Realize High-Efficiency Low-Bandgap Mixed Tin-Lead Halide Perovskite Solar Cells

We report the unsatisfactory performance of low-bandgap mixed tin (Sn)-lead (Pb) halide perovskite subcells has been one of the major obstacles hindering the progress of the power conversion efficiencies (PCEs) of all-perovskite tandem solar cells. By analyzing dark-current density and distribution, it is identified that charge recombination at grain boundaries is a key factor limiting the performance of low-bandgap mixed Sn-Pb halide perovskite subcells. It is further found that bromine (Br) incorporation can effectively passivate grain boundaries and lower the dark current density by two-three orders of magnitude. By optimizing the Br concentration, low-bandgap (1.272 eV) mixed Sn-Pb halide perovskite solar cells are fabricated with open-circuit voltage deficits as low as 0.384 V and fill factors as high as 75%. The best-performing device demonstrates a PCE of >19%. In conclusion, the results suggest an important direction for improving the performance of low-bandgap mixed Sn-Pb halide perovskite solar cells.

14 SOLAR ENERGY↗
DOE OSTI2020

Loamy sand soil approaches organic carbon saturation after 37 years of conservation tillage

Conservation tillage is reported to increase soil organic carbon (SOC) and total nitrogen (TN) contents, but long-term (>30 yr) field results quantifying the responses in Coastal Plain Ultisols are sparse. The distribution, accumulation, and topsoil storage of SOC and TN after 37 yr of crop production using conventional (CvT) or conservation tillage (CnT) on a Norfolk loamy sand (fine-loamy, kaolinitic, thermic, Typic Kandiudults) were quantified. Soil samples were collected annually from the 0-5-, 5-10-, and 10-15-cm depth increments beneath corn (Zea mays L.), soybean [Glycine max (L.) Merr.], and cotton (Gossypium hirsutum L.) crops. Overall, SOC and TN accumulation in the 0-5-cm depth were highest for Norfolk soil under CnT. Focusing on total long-term changes for the 0-15-cm sampling depth beneath various corn crops shows that CnT and CvT sequestered 24.7 and 21.4 Mg C ha -1 , respectively. Between 1978 and 2016, there was a highly significant (P < .0001) exponential increase in SOC within the top 5-cm soil depth. However, the exponential curves began to plateau suggesting the Norfolk topsoil was approaching its organic carbon (OC) storage capacity. These field measurements strongly indicate that additional topsoil SOC increases with current tillage and crop management practices are limited.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2014

Flow Partitioning in Fully Saturated Soil Aggregates

Microbes play an important role in facilitating organic matter decomposition in soils, which is a major component of the global carbon cycle. Microbial dynamics are intimately coupled to environmental transport processes, which control access to labile organic matter and other nutrients that are needed for the growth and maintenance of microorganisms. Transport of soluble nutrients in the soil system is arguably most strongly impacted by preferential flow pathways in the soil. Since the physical structure of soils can be characterized as being formed from constituent micro aggregates which contain internal porosity, one pressing question is the partitioning of the flow among the “inter-aggregate” and “intra-aggregate” pores and how this may impact overall solute transport within heterogeneous soil structures. The answer to this question is particularly important in evaluating assumptions to be used in developing upscaled simulations based on highly-resolved mechanistic models. We constructed a number of diverse multi-aggregate structures with different packing ratios by stacking micro-aggregates containing internal pores and varying the size and shape of inter-aggregate pore spacing between them. We then performed pore-scale flow simulations using computational fluid dynamics methods to determine the flow patterns in these aggregate-of-aggregates structures and computed the partitioning of the flow through intra- and inter-aggregate pores as a function of the spacing between the aggregates. The results of these numerical experiments demonstrate that soluble nutrients are largely transported via flows through inter-aggregate pores. Although this result is consistent with intuition, we have also been able to quantify the relative flow capacity of the two domains under various conditions. For example, in our simulations, the flow capacity through the aggregates (intra-aggregate flow) was less than 2% of the total flow when the spacing between the aggregates was larger than 18 micron. Inter-aggregate pores continued to be the dominant flow pathways even at much smaller spacing; intra-aggregate flow was less than 10% of the total flow when the inter- and intra-aggregate pore sizes were comparable. Such studies are making it possible to identify which model upscaling assumptions are realistic and what computational methods are required for detailed numerical investigation of microbial carbon cycling dynamics in soil systems.

computational fluid dynamics↗
DOE OSTI2025

A statistical and simulation-informed model for estimating permeability from pore size distribution in saturated geomaterials

Accurate permeability estimation is essential across subsurface engineering applications but remains challenging due to the complex pore structures of natural geomaterials. Traditional empirical methods and simplified theoretical models often inadequately capture the role of pore size distribution and connectivity. Here, this study develops a statistical and simulation-informed permeability model that collapses pore-scale complexity into a compact scaling of the form k = αϕμ d 2 , where ϕ is porosity, μ d is mean pore size, and α is a weakly varying coefficient. By combining pore network simulations with statistical analysis of unimodal and bimodal pore size distributions, we identify three key findings: (i) permeability is much more sensitive to mean pore size than to porosity; (ii) across extensive datasets, the ratio σ d /μ d (standard deviation to mean) clusters around a characteristic value ∼0.4, allowing the effects of the full pore size distribution to be represented by μ d and a narrowly varying α ≈ 0.05; and (iii) for bimodal systems, there exists a critical fraction of small pores ∼0.78 above which flow becomes small-pore dominated, enabling the definition of an effective flow-controlling pore population and facilitating simplified permeability estimation for such systems. The resulting model, which requires only porosity and a representative mean pore size as inputs, is validated against comprehensive experimental datasets (>1700 samples) spanning diverse soils and rocks and achieves good predictive accuracy. Overall, this work provides a physically grounded yet practically simple permeability estimator suitable for subsurface engineering, environmental protection, and resource management applications.

Permeability↗