Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Reflectance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Characterization of the Surface of Silver Ion-Implanted Silicon by Optical Reflectance

The optical reflection of the surface of silicon implanted with Ag{sup +} ions at low energy of 30 keV in a wide dosage range of 5.0·10{sup 14}–1.5·10{sup 17} ion/cm{sup 2} was studied in parallel with electron microscopy observation of the samples. It was found that with increasing ion dose of irradiation, the reflection intensity in the UV range of the Si spectrum decreases monotonically due to amorphization and macrostructuring of Si near-surface layer. In the long-wavelength region of the reflection spectra, a selective band with a maximum near 830 nm is recorded due to the plasmon resonance of ion-synthesized Ag nanoparticles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Social relations: A critical reflection on the notion of social impacts as change

This article seeks to reflect upon the dominant conception of social impacts as the change produced by development projects and programs, and the ways in which those affected perceive and experience them. Identifying change may be a necessary but not sufficient step in acknowledging the complexity of social life. Engaging with critical scholarship produced in the fields of both social impact assessment (SIA) and of the social studies of technical/planned interventions, I discuss how the understanding of social impacts as change responds ultimately to a causal–instrumental logic that, in order to make sense of the complexity of social life, tends to reduce it to a series of variables and matrices. I suggest a complementary dialectical approach focusing on social relations. This approach, allows an alternative means of analysing social impacts concerning the way policies and projects reconfigure conditions and possibilities on a societal level. To accomplish this, and in order to go beyond the sequence of potential impacts (or changes) and their generic indicators, I propose a set of analytical questions that highlight how social relations are structured. Besides, on the assumption that development is both a form of governance and a space of contestation, negotiation, and activism, this approach may contribute to further the potential for reflection and mobilisation that the practice of SIA presents. - Highlights: •Change, which is inherent to social life, is insufficient to determine social impacts. •The critique of causal-instrumental logic provides insights to reflect on social impacts. •Social impacts should rather refer to how interventions reconfigure social relations. •The complex, mutually constitutive nature of social phenomena may thus be recognized. •SIA should go beyond change to the understanding of its socio-political significance.

54 ENVIRONMENTAL SCIENCES↗

Bidirectional reflection of semitransparent polytetrafluoroethylene (PTFE) sheets on a silver film

In our recent work, record-high solar reflectance (exceeding 99%) has been demonstrated by placing a layer of highly scattering, semitransparent polytetrafluoroethylene (PTFE) sheet on top of a silver film. This can significantly improve the performance of daytime radiative cooling system. Although a PTFE slab of 10-mm thick acts as an excellent diffuse reflector, it is unclear how this dual-layer structure made of a thin PTFE on a mirror-like reflector will alter the bidirectional reflection. Here, we report measurements of the bidirectional reflectance distribution function (BRDF) of the dual-layer structure using a laser scatterometer at the wavelength of 635 nm. Measurements of the BRDF and the bidirectional transmittance distribution function (BTDF) of free-standing PTFE sheets are also performed. The measured BRDF for a PTFE sheet as thin as 236 μm on Ag is essentially diffuse except at large incidence angles. A Monte Carlo ray-tracing method incorporating both surface scattering and volumetric scattering is developed to theoretically model the BRDF in order to elucidate the underlying mechanisms. Finally, the numerical model captures the main features and can be used to study the bidirectional properties for PTFE sheets thinner than what is experimentally available.

42 ENGINEERING↗

Experimental study of vibration isolation in thin-walled structural assemblies with embedded total-internal-reflection metasurfaces

The concept of total-internal-reflection elastic metasurface (TIR-MS) was recently proposed [1] and employed within flexible planar waveguides in order to create highly subwavelength sound-hard barriers impenetrable to low frequency elastic waves. The underlying physical mechanism relies on the design of engineered interfaces exhibiting extreme phase gradients such that any incoming wave at, approximately, any incidence will experience total-internal-reflection conditions. At the design frequency, the metasurface exhibits a large phase gradient such that, in accordance with the generalized Snell's law, the first critical angle is virtually always exceeded. It is worth noting that in practical realizations, the actual total reflection performance might vary depending on the angle of incidence. This dependence is due to the discrete implementation of the metasurface which results in diffraction effects. This paper presents the results of an experimental study that explores the vibration isolation performance of TIR-MS when applied to structures made of complex combinations of different elastic waveguides (e.g. bolted assemblies of beams, plates, and shells). Such system can be seen as a prototypical structure emulating mechanical assemblies of practical interest for many engineering applications. Experimental results confirm that, when the TIR-MS is embedded in the host waveguide, significant vibration isolation capabilities are achieved under quasi-omnidirectional incidence and highly subwavelength excitation conditions (i.e. the ratio of the operating wavelength to the width of the TIR-MS is approximately 5.25). Furthermore, these experimental results suggest new interesting directions to achieve vibration isolation and mechanical energy filtering for practical engineering systems.

42 ENGINEERING↗

IMPACT OF DIELECTRIC PARAMETERS ON THE REFLECTIVITY OF 3C-SiC WAFERS WITH A ROUGH SURFACE MORPHOLOGY IN THE RESTSTRAHLEN REGION

A layer-on-substrate model is used to obtain the infrared reflectance for 3C-SiC with a rough surface morphology. The effect of varying dielectric parameters of the “damaged layer” on the observed reflectivity of the 3C-SiC in the reststrahlen region is assessed. Different simulated reflectance spectra are obtained to those if the dielectric parameters of the “substrate” were varied. Most notable changes in the shape of the simulated reststrahlen peak are observed for changes in the high frequency dielectric constant, the phonon damping constant, the phonon frequencies and “thickness” of damaged surface layer.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Using soil library hyperspectral reflectance and machine learning to predict soil organic carbon: Assessing potential of airborne and spaceborne optical soil sensing

Soil organic carbon (SOC) is a key variable to determine soil functioning, ecosystem services, and global carbon cycles. Spectroscopy, particularly optical hyperspectral reflectance coupled with machine learning, can provide rapid, efficient, and cost-effective quantification of SOC. However, how to exploit soil hyperspectral reflectance to predict SOC concentration, and the potential performance of airborne and satellite data for predicting surface SOC at large scales remain relatively underknown. Here, this study utilized a continental-scale soil laboratory spectral library (37,540 full-pedon 350–2500 nm reflectance spectra with SOC concentration of 0–780 g·kg –1 across the US) to thoroughly evaluate seven machine learning algorithms including Partial-Least Squares Regression (PLSR), Random Forest (RF), K-Nearest Neighbors (KNN), Ridge, Artificial Neural Networks (ANN), Convolutional Neural Networks (CNN), and Long Short-Term Memory (LSTM) along with four preprocessed spectra, i.e. original, vector normalization, continuum removal, and first-order derivative, to quantify SOC concentration. Furthermore, by using the coupled soil-vegetation-atmosphere radiative transfer model, we simulated twelve airborne and spaceborne hyper/multi-spectral remote sensing data from surface bare soil laboratory spectra to evaluate their potential for estimating SOC concentration of surface bare soils. Results show that LSTM achieved best predictive performance of quantifying SOC concentration for the whole data sets (R 2 = 0.96, RMSE = 30.81 g·kg –1 ), mineral soils (SOC ≤ 120 g·kg –1 , R 2 = 0.71, RMSE = 10.60 g·kg –1 ), and organic soils (SOC > 120 g·kg –1 , R 2 = 0.78, RMSE = 62.31 g·kg –1 ). Spectral data preprocessing, particularly the first-order derivative, improved the performance of PLSR, RF, Ridge, KNN, and ANN, but not LSTM or CNN. We found that the SOC models of mineral and organic soils should be distinguished given their distinct spectral signatures. Finally, we identified that the shortwave infrared is vital for airborne and spaceborne hyperspectral sensors to monitor surface SOC. This study highlights the high accuracy of LSTM with hyperspectral/multispectral data to mitigate a certain level of noise (soil moisture <0.4 m 3 ·m –3 , green leaf area < 0.3 m 2 ·m –2 , plant residue <0.4 m 2 ·m –2 ) for quantifying surface SOC concentration. Forthcoming satellite hyperspectral missions like Surface Biology and Geology (SBG) have a high potential for future global soil carbon monitoring, while high-resolution satellite multispectral fusion data can be an alternative.

54 ENVIRONMENTAL SCIENCES↗

Surface albedo and reflectance: Review of definitions, angular and spectral effects, and intercomparison of major data sources in support of advanced solar irradiance modeling over the Americas

This study defines albedo and reflectance in the context of solar applications. It examines the main sources of surface albedo data that can be used to help solar irradiance modeling efforts, such as undertaken by the National Renewable Energy Laboratory (NREL) over the Americas, for instance, per the National Solar Radiation Database (NSRDB). The MODIS-based albedo database, as used as input to derive historical time series of solar irradiance in the current version of the NSRDB, is compared to other sources of global gridded data over the Americas in general and some specific areas in particular. The particular role of snow cover is analyzed. It is found that, in the current MODIS-based NSRDB implementation, snow-impacted areas have been assigned a too high albedo in general because of the lack of consideration for the antagonistic effect of surface roughness, among other factors. Other albedo databases, such as CMSAF, MINES-ParisTech or the ERA5 reanalysis, do not display such high albedos at latitudes above ~40 degrees N. The gap-free and snow-free MODIS MCD43GF product is found affected by a long-term downward trend over some areas and out-of-phase seasonal effects over other areas, in comparison with MERRA-2 reanalysis data in particular. Comparisons with actual albedo measurements at the arid Desert Rock site in Nevada also show that albedo data derived from land surface models are affected by systematic bias. Five albedo databases are intercompared for the area around Ivanpah Playa, California, which has great importance in both remote sensing and solar applications. Various aspects of the proper usage of albedo data in solar radiation modeling are discussed, regarding calculations of both the backscattering process and reflections on a tilted surface: spatial resolution, temporal resolution, angular effects, and spectral effects. An important distinction is made between the use of albedo data at ~4 km resolution for backscattering calculations and at ~10 m resolution for transposition calculations to tilted planes, which might additionally require spectral information for monofacial or bifacial PV applications. It is shown that the tilted calculations usually performed in solar resource assessments are far from realistic in the case of most large-scale PV applications, for which a more suitable methodological approach is described. For such needs, the limitations of the current sources of high-resolution reflectance data are discussed. The impact of surface albedo estimation errors on the estimation of backscattered irradiance over snowy areas is evaluated. It is found non-negligible, and even large under cloudy conditions.

14 SOLAR ENERGY↗

Thermal model to quantify the impact of sub-bandgap reflectance on operating temperature of fielded PV modules

Minimizing module heating is an effective way to increase the lifetime energy output of photovoltaic systems. Maximizing the reflection of light that is unusable for energy conversion is one of the most promising ways to reduce the operating temperature of fielded modules. We derive a model based on a steady-state energy balance to quantify the temperature benefit of cell or module optical modifications aimed at improving reflection of light with photon energies below the photovoltaic cell bandgap energy. This more detailed model is then simplified so that, from outdoor measured data, temperature differences arising from reflectance can be isolated from those arising from irradiance, wind speed, and module standard-test-condition efficiency.

14 SOLAR ENERGY↗

Noncontact Andreev Reflection as a Direct Probe of Superconductivity on the Atomic Scale

Direct detection of superconductivity has long been a key strength of point-contact Andreev reflection. However, its applicability to atomic-scale imaging is limited by the mechanical contact of the Andreev probe. To this end, we present a new method to probe Andreev reflection in a tunnel junction, leveraging tunneling spectroscopy and junction tunability to achieve quantitative detection of Andreev scattering. This method enables unambiguous assignment of superconducting origins of current-carrying excitations, as well as detection of higher order Andreev processes in atomic-scale junctions. Herein, we furthermore revealed distinct sensitivity of Andreev reflection to natural defects, such as step edges, even in classical superconductors. The methodology opens a new path to nano- and atomic-scale imaging of superconducting properties, including disordered superconductors and proximity to phase transitions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Monte Carlo simulation applied in total reflection x-ray fluorescence: Preliminary results

The X-ray Fluorescence (XRF) analysis is a technique for the qualitative and quantitative determination of chemical constituents in a sample. This method is based on detection of the characteristic radiation intensities emitted by the elements of the sample, when properly excited. A variant of this technique is the Total Reflection X-ray Fluorescence (TXRF) that utilizes electromagnetic radiation as excitation source. In total reflection of X-ray, the angle of refraction of the incident beam tends to zero and the refracted beam is tangent to the sample support interface. Thus, there is a minimum angle of incidence at which no refracted beam exists and all incident radiation undergoes total reflection. In this study, we evaluated the influence of the energy variation of the beam of incident x-rays, using the MCNPX code (Monte Carlo NParticle) based on Monte Carlo method.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optical designs of reflection and refraction collection optics for a JT-60SA core Thomson scattering system

Collection optics for core measurements in a JT-60SA Thomson scattering system were designed. The collection optics will be installed in a limited space and have a wide field of view and wide wavelength range. Two types of the optics are therefore suggested: refraction and reflection types. The reflection system, with a large primary mirror, avoids large chromatic aberrations. Because the size limit of the primary mirror and vignetting due to the secondary mirror affect the total collection throughput, conditions that provide the high throughput are found through an optimization. A refraction system with four lenses forming an Ernostar system is also employed. The use of high-refractive-index glass materials enhances the freedom of the lens curvatures, resulting in suppression of the spherical and coma aberration. Moreover, sufficient throughput can be achieved, even with smaller lenses than that of a previous design given in [H. Tojo, T. Hatae, T. Sakuma, T. Hamano, K. Itami, Y. Aida, S. Suitoh, and D. Fujie, Rev. Sci. Instrum. 81, 10D539 (2010)]. The optical resolutions of the reflection and refraction systems are both sufficient for understanding the spatial structures in plasma. In particular, the spot sizes at the image of the optics are evaluated as ∼0.3 mm and ∼0.4 mm, respectively. The throughput for the two systems, including the pupil size and transmissivity, are also compared. The results show that good measurement accuracy (<10%) even at high electron temperatures (<30 keV) can be expected in the refraction system.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Optical reflectivity improvement by upgrading metallic glass film quality

The effects of atomic-defect and free-volume amounts of metallic glassy film on the optical reflectivity and mechanical properties of the sputtered metallic glass thin films are explored. With a lower Ar working pressure and the proper post-annealing at temperatures slightly lower than the glass-transition temperature T{sub g}, film free volumes and defects would reduce, resulting in better atomic bonding and higher film hardness/modulus, which in turn leads to lower electric resistivity and higher optical reflectivity. Annealing above T{sub g} would induce crystalline structure which would lead to competition with the optical transition of the Drude free electrons and hinder the optical reflectivity in the visible range.

36 MATERIALS SCIENCE↗

High-frequency nonreciprocal reflection from magnetic films with overlayers

We perform a theoretical study of the nonreciprocal reflection of high-frequency microwave radiation from ferromagnetic films with thin overlayers. Reflection from metallic ferromagnetic films is always near unity and shows no nonreciprocity. In contrast, reflection from a structure which has a dielectric overlayer on top of a film composed of insulated ferromagnetic nanoparticles or nanostructures can show significant nonreciprocity in the 75–80 GHz frequency range, a very high value. This can be important for devices such as isolators or circulators.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

An effective medium study of surface plasmon polaritons in nanostructured gratings using attenuated total reflection

Recent work studied surface plasmon resonances in structured materials by the method of attenuated total reflection using a prism on top of a metallic grating. That calculation considered Transverse Magnetic polarized radiation, involved an expansion in 121 Fourier modes, and found a number of interesting features. Many of these features were attributed to localized plasmons or other factors, which arise from a discrete structure. We use a simple effective medium theory to address the same problem, and find many of the same reflection features observed in the more complex calculation, indicating that localization is not an important factor. We also evaluate the possibility of using some of the new features in the reflection spectrum for bio-sensing and find that the sensitivity of the system to small changes in relative permittivity is increased compared to some standard methods.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The enlargement of high reflectance range in ultra-narrow bandpass filter with disordered one-dimensional photonic crystal

The conventional ultra-narrow bandpass filter structure has only a very limited width of high-reflectance range. This study, by introducing disorder into one-dimensional (1D) photonic crystal, attempts to enlarge the width of high-reflectance range while keeping the ultra-narrow bandpass. Enlargement by 46.8% was obtained after theoretical design. Since this structure contains some degree of disorder already, it has a strong tolerance of the variation of layer thicknesses. Unlike studies using conventional periodic structures, theoretical statistical results in this study demonstrate that high quality remains even after allowing for ±5% variation of layer thicknesses. This indicates that only a very low thickness control precision is required in the future and the production difficulty is immensely lowered. To put the construction to test, a structure has been developed and demonstrated by a magnetron reactive sputtering coating system, which agrees with the theoretical result very well. By introducing disorder into the periodic 1D photonic crystal structure, the high-reflectance range is significantly extended by 37%, with an ultra-narrow pass band of 0.8 nm and intensity of 82%.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Broadband and wide-angle negative reflection at a phononic crystal boundary

We have theoretically and experimentally demonstrated the anomalous negative reflection at the boundary of a well-designed two-dimensional phononic crystal. This exotic phenomenon is attributed to the selective enhancement of −1st order diffraction mode with the zero-order diffraction mode being dramatically suppressed. After material and structural optimization, the negative reflection can be maintained in a broadband of frequencies and for a wide incident angle range. Our system can be employed to design Littrow configuration to realize perfect broadband and wide-angle blazing. The study gives a possibility to achieve greater flexibility and stronger effects in manipulating reflected acoustic waves, which has potential applications in underwater communication, medical ultrasonics, etc.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Combination of grazing incidence x-ray fluorescence with x-ray reflectivity in one table-top spectrometer for improved characterization of thin layer and implants on/in silicon wafers

As Grazing Incidence X-ray Fluorescence (GIXRF) analysis does not provide unambiguous results for the characterization of nanometre layers as well as nanometre depth profiles of implants in silicon wafers by its own, the approach of providing additional information using the signal from X-ray Reflectivity (XRR) was tested. As GIXRF already uses an X-ray beam impinging under grazing incidence and the variation of the angle of incidence, a GIXRF spectrometer was adapted with an XRR unit to obtain data from the angle dependent fluorescence radiation as well as data from the reflected beam. A θ-2θ goniometer was simulated by combining a translation and tilt movement of a Silicon Drift detector, which allows detecting the reflected beam over 5 orders of magnitude. HfO{sub 2} layers as well as As implants in Silicon wafers in the nanometre range were characterized using this new setup. A just recently published combined evaluation approach was used for data evaluation.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Dependence of Andreev reflection and Schottky barriers on GaMnAs/Nb interface treatment

We studied the interfacial contact between GaMnAs and superconducting Nb micro-structures both with and without removing the native GaMnAs surface oxide. Our results show that a strong Schottky barrier forms at the interface when the oxide layer is left between Nb and GaMnAs. This barrier can be confused for Andreev Reflection and erroneously used to extract spin polarization. A simple acid etch is shown to remove the oxide film, thus decreasing the interface resistance, removing the Schottky barrier, and causing a clear Andreev reflection effect. One key recommendation for point contact Andreev reflection studies is to push the tip hard enough into contact and verify that the total resistance is not too high.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗