Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Recovery”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44
All sourcesNASA NTRSDOE OSTI
DOE OSTI2013

Angiotensin-converting enzyme inhibitor (enalapril maleate) accelerates recovery of mouse skin from UVB-induced wrinkles

Highlights: •Angiotensin converting enzyme (ACE) increases in UVB-irradiated skin. •Administration of an ACE inhibitor improved UVB-induced skin wrinkle. •ACE inhibitor improved UVB-induced epidermal hypertrophy. •ACE inhibitor improved transepidermal water loss in the UVB-irradiated skin. -- Abstract: Angiotensin-converting enzyme (ACE) activity and angiotensin II signaling regulate cell proliferation, differentiation, and tissue remodeling, as well as blood pressure, while in skin, angiotensin II signaling is involved in wound healing, inflammation, and pathological scar formation. Therefore, we hypothesized that angiotensin II is also involved in photoaging of skin. In this study, we examined the effect of enalapril maleate, an ACE inhibitor, on recovery of wrinkled skin of hairless mice exposed to long-term UVB irradiation. Immunohistochemical observation revealed that expression of ACE, angiotensin II, and angiotensin II type 1 (AT1) and type 2 (AT2) receptors in the skin was increased after UVB irradiation (3 times/week at increasing intensities for 8 weeks). Administration of enalapril maleate (5 times/week for 6 weeks, starting 1 week after 10-week irradiation) accelerated recovery from UVB-induced wrinkles, epidermal hyperplasia and epidermal barrier dysfunction, as compared with the vehicle control. Our results indicate that ACE and angiotensin II activity are involved in skin photoaging, and suggest that ACE inhibitor such as enalapril maleate may have potential for improvement of photoaged skin.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2025

Biotechnological solutions for critical mineral recovery from unconventional feedstocks

Secure and sustainable metal recovery from unconventional feedstocks is needed to meet the mineral demands of energy, defense, and electronic technologies. Here, we highlight the potential to leverage nature’s ability to extract and differentiate metal ions in biotechnologies that could become the next generation of mining and refining. We describe bulk and trace processes and then discuss the advances and opportunities of two key bioprocesses: microbially mediated solubilization of metal ions from solid matrices (termed ‘bioleaching’) and bio-based separation of solubilized ions via selective adsorption to proteins. Both biotechnologies have advantages such as reduced energy input for leaching low-grade feedstocks and reduced organic solvent demand for separating ions with similar physiochemical properties but require more development for industrial scale recovery from unconventional feedstocks. Innovation in biological science and engineering may bring timely solutions to key challenges toward recovering critical minerals from unconventional feedstocks.

organic↗
DOE OSTI2023

Analytical investigation of the dew point water recovery system with potential application for drinking water production

The article presents the analytical investigation of the Dew Point Water Recovery (DPWR) system with potential application for drinking water production. Four different configurations of the DPWR system were proposed, differing in the number and type of dew point cooling exchangers used, and their operation was described using a validated convective heat transfer coefficient mathematical model. It was found that the three stage configu-ration of the DPWR system with a regenerative exchanger has the best water recovery performance, while the three stage configuration with a counter-flow exchanger has the best ratio of energy supplied to the system in relation to the amount of water produced. It was also found that the DPWR system can operate in a wide range of operating conditions with a specific electric energy consumption reaching below 0.9 kWh/m 3 and GOR in the range of 0.36-2.16. What distinguishes the DPWR system from other methods of drinking water production is the ability to work without an additional source of thermal energy apart from the energy of the air supplied to the system. Thanks to this property, the system has the potential to fill the technological gap of a low-energy and easily accessible method of drinking water production.

42 ENGINEERING↗
DOE OSTI2015

Recovery Profiles of T-Cell Subsets Following Low-Dose Total Body Irradiation and Improvement With Cinnamon

Purpose: Inefficient T-cell reconstitution from x-ray–induced immune damage reduces antitumor response. To understand the profile of T-cell reconstitution after irradiation will overcome the barrier of antitumor immunity. This study aimed to identify the recovery profile of T-cell subsets following x-ray irradiation and to highlight the role of cinnamon on efficient T-cell restoration postexposure in the antitumor response. Methods and Materials: CD3{sup +}, CD8{sup +}, and CD4{sup +} T cells and Th1, Th2, Th17, and regulatory T (Treg) cells were evaluated at different time points after single low-dose total body irradiation (SLTBI) with or without cinnamon treatments. T-bet, GATA3, RORγt, and Foxp3 signaling specific for Th1, Th2, Th17, and Treg were also analyzed by RT-PCR assay. The effects of cinnamon on efficient T-cell subset reconstitution was confirmed in a lung melanoma model in irradiated mice. Results: Reconstitution of CD4{sup +} T cells was delayed more than that of CD8{sup +} T cells in T-cell restoration after SLTBI. The production of IFNγ by Th1 or Tc1 cells was sharply decreased and was accompanied by reduced T-bet mRNA, even when total T-cell numbers had recovered; the frequencies of Th17 and Treg cells and their specific transcription factors (RORγt and Foxp3, respectively) were obviously increased. Irradiation-induced inefficient T-cell reconstitution impaired the antitumor capacities in the lung melanoma model. Pretreatment with cinnamon in irradiated mice accelerated the generation of Th1 and reduced the differentiation of Treg cells by activating T-bet and limiting transcriptions of Foxp3. Improvement resulting from cinnamon pretreatment on the efficient T-cell recovery profile from SLTBI promoted antitumor immunity in the lung melanoma model. Conclusions: T-cell reconstitution from SLTBI was characterized by impaired Th1 and elevated Th17 and Treg cells. Cinnamon effectively improved the imbalance of T-cell subsets by promoting the proliferation of Th1 and by suppressing expansions of Th17 and Tregs. The role of cinnamon in efficient T-cell reconstitution from SLTBI is effective in antitumor immunity.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2022

Continuous recovery of high-purity Kraft lignin from black liquor via simultaneous, liquid-phase acidification and purification

Here, a key advantage of the Sequential Liquid-Lignin Recovery and Purification (SLRP) process for the recovery of lignin from Kraft black liquor is the precipitation of a solvated, “liquid-lignin” phase (vs. the typical solid) during the CO 2 acidification step. Here, we have discovered that this lignin can also be maintained in a solvated state during the H 2 SO 4 acidification step if aqueous acetic acid from the Aqueous Lignin Purification with Hot Agents (ALPHA) process is incorporated into the H 2 SO 4 solution. As the liquid-lignin is converted from its salt form at pH = 9.5 to its acid form at pH = 2.5, the lignin initially solvated with water becomes solvated and thus liquefied with the organic–water solution. Maintaining the lignin in a solvated liquid state has two advantages: (1) the entire SLRP + ALPHA process, from starting black liquor to final lignin product, can be operated continuously; and (2) mass transfer of metals impurities out of the liquid-lignin phase is significantly enhanced, resulting in both a cleaner Kraft lignin product (~2000 ppm Na and 0.5-1.0 % ash) and reduced water washing.

09 BIOMASS FUELS↗
DOE OSTI2026

Synergistic effects of chemical-free hydrothermal pretreatment on the recovery of cellulosic sugars and pectin from sugar mill-derived sugar beet pulp

Sugar mills processing sugar beet generate large amounts of sugar beet pulp (SBP), a carbohydrate-rich byproduct composed of 22–30% cellulose, 24–32 % hemicellulose, and 15-20% pectin. Mild, chemical-free hydrothermal pretreatment offers a promising approach to recover these compounds while minimizing pectin degradation, reducing chemical use, and lowering operating costs for value-added applications. This study evaluates the effects of chemical-free hydrothermal pretreatment on cellulosic sugars recovery and its synergy with subsequent pectin extraction under pretreatment conditions ranging from 80°C to 120°C for 15-45 min. Results show that increasing pretreatment severity preserved most glucans with 4% decrease in galacturonan content. Optimal pretreatment (100°C for 45 min) followed by enzymatic hydrolysis achieved the best glucose (95%) and pentose (74%) yields, while galacturonan remained concentrated in the residual solids. Subsequent citric acid extraction at 80°C for 3 hr and a solid-to-liquid ratio of 1:15 yielded up to 85% pectin, significantly lowering water, chemical, and energy requirements compared to conventional industrial extraction. The integration of mild hydrothermal pretreatment with enzymatic hydrolysis thus maximized sugar recovery and enabled efficient downstream pectin extraction without compromising product yields. These findings advance low-impact valorization strategies to reinforce SBP’s values in biorefinery.

09 - BIOMASS FUELS↗
DOE OSTI2019

Estimation of and barriers to waste heat recovery from harsh environments in industrial processes

This paper discusses the industrial potential for waste heat recovery (WHR) in harsh environments – defined as a waste heat stream having either a temperature of at least 650 °C or containing reactive constituents that complicate heat recovery. The analysis covers five industries (steel, aluminum, glass, cement, and lime), chosen based on volume of production, discharge of exhaust gases containing components that present harsh environments, possibility of recovering considerably more heat than currently recovered, and current lack of acceptable WHR options. The total potential energy savings identified in harsh environment waste heat streams from these industries is equal to 15.4% (113.6 TWh) of the process heat energy lost in U.S. manufacturing. Existing technologies and materials for these industries are evaluated and the recoverable waste heat from harsh environment gas for each industrial sector is estimated. Finally, an in-depth summary of each waste heat source shows exactly where waste heat can be recovered and what specific issues must be addressed. The most potential lies within steel blast furnaces (46 TWh/year). Other waste heat streams considered include steel electric arc furnaces (14.1 TWh/year), flat glass (3.6 TWh/year), container glass (5.7 TWh/year), glass fiber (1.1 TWh/year), specialty glass (2.2 TWh/year), aluminum melting furnaces (4.7 TWh/year), cement (17.1 TWh/year), and lime (10.5 TWh/year). Furthermore attempts to recover waste heat in harsh environments have been mostly unsuccessful, advances in research and technology could unlock an enormous potential for energy and cost savings.

42 ENGINEERING↗
DOE OSTI2023

Ultra-low concentration terbium (Tb) adsorption on garlic peels biosorbent and its application for $\mathrm{Nd}$-$\mathrm{Fe}$-$\mathrm{B}$ scraps recovery

Motivated by the strategic value of middle-heavy rare earth elements (MHREEs), we proposed a bio-adsorption method to recover ultra-low concentration terbium (Tb(Ⅲ)) from industrial wastewater that originated from the Nd-Fe-B scraps recovery process. It could be found that Tb(Ⅲ) ions as low as 5.34 ng·mL -1 (ppb) could be adsorbed onto Ca(Ⅱ)-modified garlic peels (Ca-GP) within 10 min with the adsorption efficiency of 99.2% at pH 3.5. The adsorption behavior of Tb(Ⅲ) onto Ca-GP conformed the Langmuir isotherm model and pseudo-second-order kinetic model. Attenuated total reflection Fourier Transform Infrared Spectroscopy (ATR-FTIR), X-ray photoelectron spectroscopy (XPS) and density-functional theory (DFT) calculations results showed that Tb(Ⅲ) ions could be ion-exchanged with cations in Ca-GP such as Ca(Ⅱ) and -COOH. In application, column experiment results showed that the maximum bed adsorption capacity for Tb, praseodymium (Pr), neodymium (Nd), dysprosium (Dy), and Total rare earth elements (REEs) ions calculated by the Thomas model was 0.06, 3.50, 9.65, 7.34, and 27.37 µg·g -1 , respectively, with the initial concentration of 0.37 ng·mL -1 Tb, 20 ng·mL -1 Pr, 44 ng·mL -1 Nd, 67 ng·mL -1 Dy and 170 ng·mL -1 total REEs ions of actual solutions (below the solubility of rare-earth hydroxide). Here this manuscript thus provided a novel cost-effective and efficient approach to the enrichment and recovery of MHREEs from ultra-low concentration REEs ions-containing solutions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

Fuel relocation recovery implementation in Bison

During the initial rise to power in light water reactors (LWR), thermal gradients within a pellet cause radial and axial cracks to form in the fuel. The effect of these cracks is to reduce the pellet-cladding gap and accelerate the interaction between the fuel and cladding. This process is known as fuel relocation and may also include contributions from pellet eccentricity and cladding ovality. Since the cladding experiences both elevated temperatures and high external pressure due to the coolant, the cladding typically creeps inward further reducing the pellet-cladding gap. Once the gap is closed and pellet cladding mechanical interaction (PCMI) begins, both the thermal and mechanical behavior of the fuel is affected. The compressive forces exerted on the fuel due to contact with the cladding cause the fractured fuel sections to move back toward their original position which is termed relocation recovery. A model for this phenomenon is implemented in the BISON fuel performance code and applied to a set of validation test cases. In conclusion, the predicted fuel rod diameter is compared to experimental measurements to evaluate the influence of relocation recovery over a range of operating conditions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2017

Preference of multi-walled carbon nanotube (MWCNT) to single-walled carbon nanotube (SWCNT) and activated carbon for preparing silica nanohybrid pickering emulsion for chemical enhanced oil recovery (C-EOR)

The aim of this research was to determine the best nano hybrid that can be used as a Pickering emulsion Chemical Enhanced Oil Recovery (C-EOR). Therefore, we have prepared different carbon structures nano hybrids with SiO{sub 2} nano particles with different weight percent using sol-gel method. The as-prepared nano materials were characterized with X-Ray Diffraction (XRD), Field Emission Scanning Electron Microscopy (FE-SEM) and Thermal Gravimetric Analysis (TGA). Pickering emulsions of these nanohybrids were prepared at pH=7 in ambient temperature and with distilled water. Stability of the mentioned Pickering emulsions was controlled for one month. Emulsion phase morphology was investigated using optical microscopic imaging. Evaluation results demonstrated that the best sample is the 70% MWCNT/SiO{sub 2} nanohybrid. Stability of the selected nanohybrid (70% MWCNT/SiO{sub 2} nanohybrid) was investigated by alteration of salinity, pH and temperature. Results showed that the mentioned Pickering emulsion has very good stability at 0.1%, 1% salinity, moderate and high temperature (25 °C and 90 °C) and neutral and alkaline pH (7, 10) that is suitable for the oil reservoirs conditions. The effect of the related nano fluid on the wettability of carbonate rock was investigated by measuring the contact angle and interfacial tension. Results show that the nanofluid could significantly change the wettability of the carbonate rock from oil wet to water wet and can decrease the interfacial tension. Therefore, the 70% MWCNT/SiO{sub 2} nanohybrid Pickering emulsion can be used for Chemical Enhanced Oil Recovery (C-EOR).

36 MATERIALS SCIENCE↗
DOE OSTI2017

Recovery of dilute aqueous butanol by membrane vapor extraction with dodecane or mesitylene

A novel, nearly isothermal, nonselective-membrane separation process, membrane vapor extraction (MVE), efficiently recovers butanol from a dilute aqueous solution, for example, from a fermentation broth (Liu et al., 2015). In MVE, feed and solvent liquids are not in contact; they are separated by vapor. Therefore, compared to conventional extraction, MVE avoids formation of difficult-to-separate emulsions. In MVE, a semi-volatile aqueous solute (e.g., butanol) vaporizes at the upstream side of a membrane, diffuses as a vapor through the membrane pores, and subsequently condenses and dissolves into a high-boiling nonpolar solvent, favorable to the solute but not to water. Design analysis of a 1.5-m long, 30-m 2 membrane-area countercurrent MVE unit for processing 2-wt% aqueous butanol by dodecane solvent at 40 °C indicates over 90% recovery of the feed butanol with essentially no water loss and with very low energy requirement (Liu et al., 2015). The separation factor is over 1500. However, the published design study gives no experimental evidence for the calculated MVE separation. Here, we present experimental data to validate the MVE process. We use an omniphobic (i.e., hydrophobic and oleophobic), 0.2-µm pore-diameter Versapor®200 R membrane (Pall Corporation, Exton, PA) housed in a 6-cm wide by 10-cm long plate-and-frame channeled flow cell with 0.8-cm gap thickness. Membrane transfer area is 28 cm 2 . The membrane flow cell is designed for minimal axial concentration change and is operated in the transient mode between two recirculating flow loops. 2-wt% aqueous butanol is extracted into dodecane or mesitylene at 25 or 40 °C. Also, 1.5-wt% furfural is extracted into dodecane at 40 °C. Since vapor transport across the membrane contributes minimal resistance, MVE performance is governed by mass transfer through feed and solvent boundary layers. Mass-transfer coefficients are determined from the Graetz-Lévêque analysis of laminar thin-slit flow (Bird et al., 2002). Predicted extraction performance agrees well with experiment using no adjustable parameters. Finally, consistent with the initial multistage-design analysis (Liu et al., 2015), our new bench-scale experimental results confirm that MVE is a viable separation process to recover dilute semi-volatile biosolutes from water with minimal energy requirement. Preliminary analysis of downstream solute recovery from the extract via distillation is more efficient than that for pervaporation because of insignificant water carry over through the MVE membrane.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Life-cycle analysis of battery metal recycling with lithium recovery from a spent lithium-ion battery

Demand for critical materials (nickel, cobalt, manganese [NCM], and lithium) for use in batteries is increasing rapidly due to the expansion of the battery-electric vehicles market. Battery metal recycling (BMR) is an important technology that can potentially realize environmental and economic benefits in cathode active material (LiNi x Mn y Co z O 2 ) production using recycled materials. While current major battery recycling technologies recover cathode materials (NCM) and other metals (steel, aluminum, copper, etc.) from the spent battery, the lithium (Li) recovery rate is less than 1% in the world. In this study, we analyze the environmental benefits of a BMR process that recovers lithium in the form of lithium hydroxide monohydrate (LiOH∙H 2 O) along with other cathode materials. Using life-cycle analysis (LCA), we evaluate the life-cycle greenhouse gas (GHG) emissions, criteria air pollutant emissions, and water consumption of the new BMR technology in terms of lithium hydroxide production and cathode active material production. The LCA results show that the life-cycle GHG emissions recycled LiOH are 37–72% lower than those of virgin LiOH production from Chilean brine and Australian ore, respectively. In addition, the life-cycle GHG emissions of NCM811 produced using the recycled materials are 40–48% lower compared to virgin cathode active material production. Furthermore, recovering lithium from the spent batteries reduces associated air pollutant emissions and water consumption relative to using the virgin materials or materials from other recycling technologies without LiOH recovery.

25 ENERGY STORAGE↗
DOE OSTI2012

Assessing recycling versus incineration of key materials in municipal waste: The importance of efficient energy recovery and transport distances

Highlights: Black-Right-Pointing-Pointer We model the environmental impact of recycling and incineration of household waste. Black-Right-Pointing-Pointer Recycling of paper, glass, steel and aluminium is better than incineration. Black-Right-Pointing-Pointer Recycling and incineration of cardboard and plastic can be equally good alternatives. Black-Right-Pointing-Pointer Recyclables can be transported long distances and still have environmental benefits. Black-Right-Pointing-Pointer Paper has a higher environmental benefit than recyclables found in smaller amounts. - Abstract: Recycling of materials from municipal solid waste is commonly considered to be superior to any other waste treatment alternative. For the material fractions with a significant energy content this might not be the case if the treatment alternative is a waste-to-energy plant with high energy recovery rates. The environmental impacts from recycling and from incineration of six material fractions in household waste have been compared through life cycle assessment assuming high-performance technologies for material recycling as well as for waste incineration. The results showed that there are environmental benefits when recycling paper, glass, steel and aluminium instead of incinerating it. For cardboard and plastic the results were more unclear, depending on the level of energy recovery at the incineration plant, the system boundaries chosen and which impact category was in focus. Further, the environmental impact potentials from collection, pre-treatment and transport was compared to the environmental benefit from recycling and this showed that with the right means of transport, recyclables can in most cases be transported long distances. However, the results also showed that recycling of some of the material fractions can only contribute marginally in improving the overall waste management system taking into consideration their limited content in average Danish household waste.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2012

Determinants of sustainability in solid waste management - The Gianyar Waste Recovery Project in Indonesia

Highlights: Black-Right-Pointing-Pointer Our assessment tool helps evaluate success factors in solid waste projects. Black-Right-Pointing-Pointer Success of the composting plant in Indonesia is linked to its community integration. Black-Right-Pointing-Pointer Appropriate technology is not a main determining success factor for sustainability. Black-Right-Pointing-Pointer Structured assessment of 'best practices' can enhance replication in other cities. - Abstract: According to most experts, integrated and sustainable solid waste management should not only be given top priority, but must go beyond technical aspects to include various key elements of sustainability to ensure success of any solid waste project. Aside from project sustainable impacts, the overall enabling environment is the key feature determining performance and success of an integrated and affordable solid waste system. This paper describes a project-specific approach to assess typical success or failure factors. A questionnaire-based assessment method covers issues of: (i) social mobilisation and acceptance (social element), (ii) stakeholder, legal and institutional arrangements comprising roles, responsibilities and management functions (institutional element); (iii) financial and operational requirements, as well as cost recovery mechanisms (economic element). The Gianyar Waste Recovery Project in Bali, Indonesia was analysed using this integrated assessment method. The results clearly identified chief characteristics, key factors to consider when planning country wide replication but also major barriers and obstacles which must be overcome to ensure project sustainability. The Gianyar project consists of a composting unit processing 60 tons of municipal waste per day from 500,000 inhabitants, including manual waste segregation and subsequent composting of the biodegradable organic fraction.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2013

Experimental and life cycle assessment analysis of gas emission from mechanically–biologically pretreated waste in a landfill with energy recovery

Highlights: • Bio-methane landfill emissions from different period (0, 4, 8, 16 weeks) MTB waste have been evaluated. • Electrical energy recoverable from landfill gas ranges from 11 to about 90 kW h/tonne. • Correlation between oxygen uptake, energy recovery and anaerobic gas production shows R{sup 2} ranging from 0.78 to 0.98. • LCA demonstrate that global impact related to gaseous emissions achieve minimum for 4 week of MBT. - Abstract: The global gaseous emissions produced by landfilling the Mechanically Sorted Organic Fraction (MSOF) with different weeks of Mechanical Biological Treatment (MBT) was evaluated for an existing waste management system. One MBT facility and a landfill with internal combustion engines fuelled by the landfill gas for electrical energy production operate in the waste management system considered. An experimental apparatus was used to simulate 0, 4, 8 and 16 weeks of aerobic stabilization and the consequent biogas potential (Nl/kg) of a large sample of MSOF withdrawn from the full-scale MBT. Stabilization achieved by the waste was evaluated by dynamic oxygen uptake and fermentation tests. Good correlation coefficients (R{sup 2}), ranging from 0.7668 to 0.9772, were found between oxygen uptake, fermentation and anaerobic test values. On the basis of the results of several anaerobic tests, the methane production rate k (year{sup −1}) was evaluated. k ranged from 0.436 to 0.308 year{sup −1} and the bio-methane potential from 37 to 12 N m{sup 3}/tonne, respectively, for the MSOF with 0 and 16 weeks of treatment. Energy recovery from landfill gas ranged from about 11 to 90 kW h per tonne of disposed MSOF depending on the different scenario investigated. Life cycle analysis showed that the scenario with 0 weeks of pre-treatment has the highest weighted global impact even if opposite results were obtained with respect to the single impact criteria. MSOF pre-treatment periods longer than 4 weeks showed rather negligible variation in the global impact of system emissions.

09 BIOMASS FUELS↗
DOE OSTI2015

Characterisation of metals in the electronic waste of complex mixtures of end-of-life ICT products for development of cleaner recovery technology

Highlights: • New characterisation methodology has been established to understand an industrially processed ICT waste. • Particle size distribution, composition, thermal–chemical behaviour and occurrence of metals were considered. • The characterisation provides direct guidelines for values recovery from the waste. - Abstract: Recycling of valuable metals from electronic waste, especially complex mixtures of end-of-life information and communication technology (ICT) products, is of great difficulty due to their complexity and heterogeneity. One of the important reasons is the lack of comprehensive characterisation on such materials, i.e. accurate compositions, physical/chemical properties. In the present research, we focus on developing methodologies for the characterisation of metals in an industrially processed ICT waste. The morphology, particle size distribution, compositional distribution, occurrence, liberation as well as the thermo-chemical properties of the ICT waste were investigated with various characterisation techniques, including X-ray Fluorescence Spectrometry (XRF), differential scanning calorimetry (DSC) and scanning electron microscopy (SEM) with energy dispersed spectroscopy (EDS). Due to the high heterogeneity of the material, special sample preparation procedures were introduced to minimise the discrepancies during compositional analyses. As a result, a clearer overview of the ICT waste has been reached. This research provides better understanding of the extractability of each metal and improves the awareness of potential obstacles for extraction. It will lead to smarter decisions during further development of a clean and effective recovery process.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2015

Improving material and energy recovery from the sewage sludge and biomass residues

Highlights: • SRF production from 10–40 mm fraction of pre-composted sludge and biomass residues. • The material and energy balance of compost and SRF production. • Characteristics of raw materials and classification of produced SRF. • Results of the efficiency of energy recovery, comparison analysis with – sawdust. - Abstract: Sewage sludge management is a big problem all over the world because of its large quantities and harmful impact on the environment. Energy conversion through fermentation, compost production from treated sludge for agriculture, especially for growing energetic plants, and treated sludge use for soil remediation are widely used alternatives of sewage sludge management. Recently, in many EU countries the popularity of these methods has decreased due to the sewage sludge content (heavy metals, organic pollutions and other hazards materials). This paper presents research results where the possibility of solid recovered fuel (SRF) production from the separate fraction (10–40 mm) of pre-composted materials – sewage sludge from municipal waste water treatment plant and biomass residues has been evaluated. The remaining fractions of pre-composted materials can be successfully used for compost or fertiliser production, as the concentration of heavy metals in the analysed composition is reduced in comparison with sewage sludge. During the experiment presented in this paper the volume of analysed biodegradable waste was reduced by 96%: about 20% of input biodegradable waste was recovered to SRF in the form of pellets with 14.25 MJ kg{sup −1} of the net calorific value, about 23% were composted, the rest – evaporated and discharged in a wastewater. The methods of material-energy balances and comparison analysis of experiment data have been chosen for the environmental impact assessment of this biodegradable waste management alternative. Results of the efficiency of energy recovery from sewage sludge by SRF production and burning, comparison analysis with widely used bio-fuel–sawdust and conclusions made are presented.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2017

Evaluation of performance indicators applied to a material recovery facility fed by mixed packaging waste

Highlights: • Material Flows assessment of a Material Recovery Facility has been realized. • Performance Indicators for a generic MRF have been proposed. • A Dashboard has been utilized to measure the facility performance. • Experimental values of incoming waste and output products composition are reported. - Abstract: Most of the integrated systems for municipal solid waste management aim to increase the recycling of secondary materials by means of physical processes including sorting, shredding and reprocessing. Several restrictions prevent from reaching a very high material recycling efficiency: the variability of the composition of new-marketed materials used for packaging production and its shape and complexity are critical issues. The packaging goods are in fact made of different materials (aluminium, polymers, paper, etc.), possibly assembled, having different shape (flat, cylindrical, one-dimensional, etc.), density, colours, optical properties and so on. These aspects limit the effectiveness and efficiency of the sorting and reprocessing plants. The scope of this study was to evaluate the performance of a large scale Material Recovery Facility (MRF) by utilizing data collected during a long period of monitoring. The database resulted from the measured data has been organized in four sections: (1) data related to the amount and type of inlet waste; (2) amount and composition of output products and waste; (3) operating data (such as worked hours for shift, planned and unscheduled maintenance time, setting parameters of the equipment, and energy consumption for shift); (4) economic data (value of each product, disposal price for the produced waste, penalty for non-compliance of products and waste, etc.). A part of this database has been utilized to build an executive dashboard composed by a set of performance indicators suitable to measure the effectiveness and the efficiency of the MRF operations. The dashboard revealed itself as a powerful tool to support managers and engineers in their decisions in respect to the market demand or compliance regulation variation as well as in the designing of the lay-out improvements. The results indicated that the 40% of the input waste was recovered as valuable products and that a large part of these (88%) complied with the standards of the recycling companies. The evaluation of the indicators led to the decision to modify the layout to improve the interception of some polymers for which the performance indicators were poor. In particular, two additional optical sorters have to be inserted to increase the yield indicator and to the overall performance of the facility. Definitely, the results of the work allowed to: increase the yield and purity of products’ flows; ensure the compliance of waste flows; increase the workability.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗