Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RELEASE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

NOvA 2024 official data release (26.61E20 neutrino + 12.5E20 antineutrino)

This data release corresponds to the Bayesian 2024 analysis of NOvA $\nu_e$ appearance and $\nu_{\mu}$ disappearance data, corresponding to analysis described in https://arxiv.org/abs/2509.04361. File `NOvA_2024_data_histograms.root` contains data histograms for all the NOvA data samples. Exposure: * neutrino-enhanced beam: 26.61E20 protons on target * antineutrino-enhanced beam: 12.5E20 protons on target External constraints: * ss2th12=0.851, dm21=7.53e-5 are fixed at 2019 PDG values, with negligible effect on NOvA predictions. * ss2th13 & dm32: * RCDB1D: 1D constraint from Daya Bay for ss2th13, 0.0851+/-0.0024 * RCDB2D: Correlated 2D constraint from Daya Bay on ss2th13 & dm32, available in their official 2023 data release: https://journals.aps.org/prl/abstract/10.1103/PhysRevLett.130.161802#supplemental An additional file containing the predictions (`NOvA_2024_prediction_with_systs_histograms.root`) for all channels’ signal and background components computed at the NOvA best-fit oscillation parameters and systematic pull terms. Numu samples include the no-oscillation case as well. Please note that any fits performed with these histograms are not expected to exactly reproduce the official NOvA results as parameterizations of the numerous systematic uncertainties considered in the official fits are not included in this release. The zip file also contains the 2D credible interval contours, with details in a README.md

Sztuc, Artur [University Coll. London] (ORCID:0000↗

Reduced-Order Modeling of Hydrogen Releases from Vent Stacks and with Wind Effects

Here, the physical release behavior of hydrogen is important to understand from a safety and design perspective. The consequences of unignited pressurized gaseous hydrogen plumes exiting vent stacks were considered by extending and modifying existing general hydrogen plume models. Entrainment, vent stack backpressure, and the flow regime of hydrogen exiting the vent were found to be significant factors affecting plume shape and size, but further investigation and validation with unchoked, low-Froude-number flows is recommended to improve the model’s robustness. Additionally, models for the effects of wind on unignited plume momentum and entrainment were added to explore this behavior. Wind was assumed to increase mixing of hydrogen with the ambient air, and to affect the momentum of the released jet. Introducing wind into the plume model led to a shorter plume for all wind and jet directions. A high counter-flowing wind led to non-physical results and challenges in interpreting the visualization. The proposed jet plume wind sub-models (specifically entrainment coefficients) were fit and compared to experimental data of different releases of hydrogen into a wind tunnel, but the quantity of data available and experimental conditions were limited. Thus, collection of more empirical data and for a wider range of conditions is recommended for improvement of the proposed computational models. Developing reduced-order models for these physical phenomena can improve accessibility to predicted physical behavior and the rate at which hydrogen systems can be safely designed and deployed.

entrainment↗

Data release for A search for extremely-high-energy neutrinos and first constraints on the ultra-high-energy cosmic-ray proton fraction with IceCube

<h1 id="summary">Summary</h1> <p>Title: Data Release for A search for extremely-high-energy neutrinos and first constraints on the ultra-high-energy cosmic-ray proton fraction with IceCube</p> <p>The IceCube observatory analyzed 12.6 years of data in search of extremely-high-energy (EHE) neutrinos above 5 PeV. The resultant limit of the search (Fig 1), and the effective area of the event selection (Fig 7), are provided in this data release.</p> <h1 id="contents">Contents</h1> <ul> <li><p>README file: this file</p> </li> <li><p><code>differential_limit_and_sensitivity.csv</code>: a comma separated value file, giving the observed experimental differential limit, and sensitivity, of the search as a function of neutrino energy. This is the content of Fig 1 in the paper. The first column is the neutrino energy in GeV. The second column is the limit in units of GeV/cm2/s/sr. The third column is the sensitivity in units of GeV/cm2/s/sr.</p> </li> <li><p><code>effective_area.csv</code>: a comma separated value file, giving the effective area of the search as a function of energy. This is the content of Fig 7 in the paper. The first column is the neutrino energy in GeV. The second column is the total effective area of the search, summed across neutrino flavors, and averaged across neutrinos and antineutrinos, in meters-squared. The third column is the effective area of the search for the average of electron neutrino and electron antineutrinos in units of meters-squared. The fourth column is the same as the third, but for muon-flavor neutrinos. The fifth column is the same as the third and fourth, but for tau-flavor neutrinos.</p> </li> <li><p><code>demo.py</code>: a short python script to demonstrate how to read the files. Run like <code>python demo.py</code>. A standard base python installation is sufficient, as the only dependencies are numpy and matplotlib.</p> </li> </ul> <h1 id="contacts">Contacts</h1> <p>For any questions about this data release, please write to analysis@icecube.wisc.edu</p>

Astronomy and Astrophysics↗

High-reliability release mechanism

Release mechanism employing simple clevis fitting in combination with two pin-pullers achieves high reliability degree through active mechanical redundancy. Mechanism releases solar arrays. It is simple and inexpensive and performs effectively. It adapts to other release-system applications with variety of pin-puller devices.

Paradise, J. J.↗

Fluid operated quick release mechanism

Gas operated release mechanism releases load by fluid pressure to provide positive action quick release. Method can be used with large loads and is useful in repetitive cycling functions where shear pins and similar devices would be cumbersome.

Brown, R. A.↗

Thermal release characteristics of spallogenic He, Ne, and Ar from the Carbo iron meteorite.

Analysis of the thermal release patterns of He, Ne, and Ar from samples of the Carbo iron meteorite, showing that virtually no fractionation of He 3, He 4, Ne 21, and Ar 38 occurs. Thus conclusions about iron meteorites based on measured noble gas ratios will be unaffected by gas loss, and measurement of these ratios cannot yield information about possible loss. Further, noble gas loss cannot explain the abnormal elemental and isotopic patterns observed in some iron meteorites, notably hexahedrites. The release of He and Ne was continuously observed throughout the stepwise heating sequence, and ratios of diffusion coefficients at two consecutive temperatures have been determined from measurements of the relative degassing rates at these temperatures at the time of temperature increase. Effective activation energies of 100 plus or minus 20 kcal/mol for both He 3 and Ne 21 are calculated from the diffusion coefficient ratios at temperatures above 1050 C. A sharp maximum at 750 C in both the effective activation energy and the gas release is correlated with the alpha, gamma-phase transition.

Nyquist, L. E.↗

Fission-gas-release rates from irradiated uranium nitride specimens

Fission-gas-release rates from two 93 percent dense UN specimens were measured using a sweep gas facility. Specimen burnup rates averaged .0045 and .0032 percent/hr, and the specimen temperatures ranged from 425 to 1323 K and from 552 to 1502 K, respectively. Burnups up to 7.8 percent were achieved. Fission-gas-release rates first decreased then increased with burnup. Extensive interconnected intergranular porosity formed in the specimen operated at over 1500 K. Release rate variation with both burnup and temperature agreed with previous irradiation test results.

Weinstein, M. B.↗

A fission gas release correlation for uranium nitride fuel pins

A model was developed to predict fission gas releases from UN fuel pins clad with various materials. The model was correlated with total release data obtained by different experimentors, over a range of fuel temperatures primarily between 1250 and 1660 K, and fuel burnups up to 4.6 percent. In the model, fission gas is transported by diffusion mechanisms to the grain boundaries where the volume grows and eventually interconnects with the outside surface of the fuel. The within grain diffusion coefficients are found from fission gas release rate data obtained using a sweep gas facility.

Weinstein, M. B.↗

A correlation between time-overlapping solar flares and the release of energetic particles

The origin of a large corotating solar particle event in August 1970 is discussed. Proton data from spacecraft at five widely separated heliocentric longitudes are used to identify two distinct release points which are over 100 deg apart in solar longitude. Optical flare data show a high incidence of time-overlapping flares between plage regions close to the two release points, indicating a good connection between them. Unusual X-ray and radio emissions are also observed from these regions. The spectrum of the relativistic electrons in the corotating particle event is represented by a power law with an index gamma equal to approximately -4, considerably steeper than that usually observed from a solar flare. It is concluded that there is a large magnetic loop structure connecting points over 100 deg apart on the sun which is able to trap energetic protons and electrons from an earlier solar flare. Subsequent release of these particles establishes an intense, long-lived corotating event.

Simnett, G. M.↗

Viking labeled release biology experiment - Interim results

All results of the labeled-release life-detection experiment conducted on Mars prior to conjunction are summarized. Tests at both landing sites provide remarkably similar evolution of radioactive gas upon addition of a radioactive nutrient to the Mars sample. The 'active' agent in the sample is stable to 18 C, but is substantially inactivated by heat treatment for 3 hours at 50 C and completely inactivated at 160 C, as would be anticipated if the active response were caused by microorganisms. Results from test and heat-sterilized control samples are compared with those obtained from terrestrial soils and a lunar sample. Possible nonbiological explanations of the Mars data are reviewed. Although such explanations of the labeled-release data depend on UV irradiation, the labeled-release response does not appear to depend on recent direct UV activation of surface material. Available facts do not yet permit a conclusion regarding the existence of life on Mars.

Levin, G. V.↗

C-14 in lunar soil - Temperature-release and grain-size dependence

C-14 is released from surface soils by heatings between 600 and 1000 C. The amounts of 600-1000-C C-14 obtained increase inversely with grain diameter for the 10-30 and 74-125-micron size fractions. The inverse relation shows that the 600-1000-C C-14 is located on the surface of grains and probably is of solar-wind origin. The amount released at these temperatures gives 0.002 C-14 ions per sq cm/sec for the implantation rate and corresponds to a C-14/H ratio of the order of 4 hundred-billionths for the solar wind. This result from the grain-size dependence is in accord with C-14 depth-variation studies. The C-14 released above melting temperatures can be attributed to spallation production.

Fireman, E. L.↗

Enclosure fire hazard analysis using relative energy release criteria

A method for predicting the probable course of fire development in an enclosure is presented. This fire modeling approach uses a graphic plot of five fire development constraints, the relative energy release criteria (RERC), to bound the heat release rates in an enclosure as a function of time. The five RERC are flame spread rate, fuel surface area, ventilation, enclosure volume, and total fuel load. They may be calculated versus time based on the specified or empirical conditions describing the specific enclosure, the fuel type and load, and the ventilation. The calculation of these five criteria, using the common basis of energy release rates versus time, provides a unifying framework for the utilization of available experimental data from all phases of fire development. The plot of these criteria reveals the probable fire development envelope and indicates which fire constraint will be controlling during a criteria time period. Examples of RERC application to fire characterization and control and to hazard analysis are presented along with recommendations for the further development of the concept.

Coulbert, C. D.↗

Release-rate calorimetry of multilayered materials for aircraft seats

Multilayered samples of contemporary and improved fire resistant aircraft seat materials (foam cushion, decorative fabric, slip sheet, fire blocking layer, and cushion reinforcement layer) were evaluated for their rates of heat release and smoke generation. Top layers (decorative fabric, slip sheet, fire blocking, and cushion reinforcement) with glass fiber block cushion were evaluated to determine which materials based on their minimum contributions to the total heat release of the multilayered assembly may be added or deleted. Top layers exhibiting desirable burning profiles were combined with foam cushion materials. The smoke and heat release rates of multilayered seat materials were then measured at heat fluxes of 1.5 and 3.5 W/sq cm. Choices of contact and silicone adhesives for bonding multilayered assemblies were based on flammability, burn and smoke generation, animal toxicity tests, and thermal gravimetric analysis. Abrasion tests were conducted on the decorative fabric covering and slip sheet to ascertain service life and compatibility of layers.

Fewell, L. L.↗

Large-scale fiber release and equipment exposure experiments

Outdoor tests were conducted to determine the amount of fiber released in a full scale fire and trace its dissemination away from the fire. Equipment vulnerability to fire released fibers was assessed through shock tests. The greatest fiber release was observed in the shock tube where the composite was burned with a continuous agitation to total consumption. The largest average fiber length obtained outdoors was 5 mm.

Pride, R. A.↗

Potential release of fibers from burning carbon composites

A comprehensive experimental carbon fiber source program was conducted to determine the potential for the release of conductive carbon fibers from burning composites. Laboratory testing determined the relative importance of several parameters influencing the amounts of single fibers released, while large-scale aviation jet fuel pool fires provided realistic confirmation of the laboratory data. The dimensions and size distributions of fire-released carbon fibers were determined, not only for those of concern in an electrical sense, but also for those of potential interest from a health and environmental standpoint. Fire plume and chemistry studies were performed with large pool fires to provide an experimental input into an analytical modelling of simulated aircraft crash fires. A study of a high voltage spark system resulted in a promising device for the detection, counting, and sizing of electrically conductive fibers, for both active and passive modes of operation.

Bell, V. L.↗

Electronic equipment vulnerability to fire released carbon fibers

The vulnerability of electronic equipment to damage by carbon fibers released from burning aircraft type structural composite materials was investigated. Tests were conducted on commercially available stereo power amplifiers which showed that the equipment was damaged by fire released carbon fibers but not by the composite resin residue, soot and products of combustion of the fuel associated with burning the carbon fiber composites. Results indicate that the failure rates of the equipment exposed to the fire released fiber were consistent with predictions based on tests using virgin fibers.

Pride, R. A.↗

The potential for damage from the accidental release of conductive carbon fibers from aircraft composites

The paper considers the potential for damage from the accidental release of conductive carbon fibers from aircraft composites. The electrical conductivity of carbon and graphite fibers has led to electrical equipment damage from the inadvertent release of virgin fibers into the atmosphere; an accidental release of carbon fibers from filamentary composites from the burning of crashed commercial airliners could damage electrical and electronic equipment. The experimental and analytical results by NASA of the methods of assessing the extent of potential damage in terms of costs is presented; the NASA materials research program to provide alternate or modified composites to overcome electrical hazards of carbon composites in aircraft structures is described.

Bell, V. L.↗

Release-rate calorimetry of multilayered materials for aircraft seats

Multilayered samples of contemporary and improved fire-resistant aircraft seat materials were evaluated for their rates of heat release and smoke generation. Top layers with glass-fiber block cushion were evaluated to determine which materials, based on their minimum contributions to the total heat release of the multilayered assembly, may be added or deleted. The smoke and heat release rates of multilayered seat materials were then measured at heat fluxes of 1.5 and 3.5 W/cm2. Abrasion tests were conducted on the decorative fabric covering and slip sheet to ascertain service life and compatibility of layers

Fewell, L. L.↗