Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RED SHIFT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Substituent effects on the geometric and electronic properties of tetracyano-p-quinodimethane (TCNQ): A theoretical study.

Electron acceptors are classes of molecules that are important in organic devices as they help to improve the conductivity of organic semiconducting molecules by forming p-type complexes or anion radical complexes. These molecules can be doped into hole transporting materials to provide good ohmic contact with the anode and to improve the carrier density of the hole transport layer. This results in organic light emitting devices (OLEDs) with low driving voltages and high power efficiencies. In this study we investigate a series of TCNQ derivatives with substituents expected to facilitate the electron acceptor capabilities of the quinones using density functional theory (DFT) and time-dependent density functional theory (TDDFT). As expected, the cyano substitution stabilizes both HOMO and LUMO energy levels, and increases the adiabatic electron affinity of the dopants. The stabilization effect on the LUMO levels is greater and as a result the narrowing of the HOMO-LUMO gap is seen. This fact was further confirmed by TD-DFT studies, energy of the computed S1 ← S0 transition red shifted upon CN substitution. However, perturbation to the ground state geometry is negligible and all anionic structures exhibits aromatization independent of substitution. Our study suggests that the substituted derivatives reported herein show promise as conductivity dopants

Environmental Molecular Sciences Laboratory↗

Controllable corrosion-assisted fabrication of Au–Ag alloyed hollow nanocrystals for highly efficient and environmentally-stable SERS substrates

Surface enhanced Raman scattering (SERS) substrates with both high activity and long term chemical-stability have been expected in the practical application of the SERS-based detection. In this paper, Au–Ag bimetal nanocrystals are fabricated based on the template-etching reaction in the Ag nanocubes-contained cetylpyridinium chloride (CPC) aqueous solution via adding the HAuCl 4 solution. The obtained nanocrystals are Au–Ag alloyed and hollow in structure. Further, it has been found that with the increasing Au/Ag molar ratio, the shape of the alloyed nanocrystals evolve from the truncated nanocubes to the hollow boxes and then nanocages, showing the ever red-shifting surface plasmon resonance from the visible to the infrared region. The formation of the alloyed hollow nanocrystals is attributed to the preferential dissolution of the Ag nanocubes induced by CPC selective adsorption and the three to one galvanic replacement reaction between Ag and Au atoms. Importantly, such Au–Ag alloyed hollow nanocrystals, especially the ones with a low Au/Ag atomic ratio, show both high SERS activity and long term environmental stability compared with pure Ag or Au nanocrystals, and are the ideal candidate for the SERS substrate with practical application value. As a result, this work not only demonstrates the nanofabrication route to the alloyed hollow nanocrystals with controllable shapes and tunable optical properties in a large region, but also presents highly active and chemically-stable SERS substrates for the practical SERS-based detection.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Ab Initio modeling of Near-Edge EELS spectra for chemisorbed molecules

Abstract Electron energy loss spectroscopy (EELS) has recently been applied to probe chemisorbed molecules on metal nanostructures, but a fundamental understanding of the correlation between these spectra and the electronic structures of the adsorbates has been limited. We report here on the insights afforded by time-dependent density functional theory to decipher the energy loss near edge structure (ELNES) of EELS spectra associated with chemisorption. These first-principles calculations simulate the ELNES-EELS spectra for chemisorbed CO on various facets of Au and Pt. Computational predictions of key signatures such as the ‘red shift’ and reductions in the peak intensity of the 2 π * and 6 σ * peaks, as compared to free CO in the gas phase, are validated in comparison to experimentally collected EELS spectra. These signatures are revealed to arise from changes in the electronic structure in terms of unoccupied density of states associated with the chemisorption process. They are consistent with a Blyholder model that incorporates donation and back-donation of electrons. They are also characteristic of the chemisorption process, such as the choice of metal, site of adsorption and the coverage and distribution of adsorbates. Our simulations thus provide guidelines for the use of ELNES-EELS to characterize the atomic structure and adsorption property of nanostructured surfaces and facilitate the development of advanced nanomaterials for catalytic applications.

Materials Science↗

Revealing charge carrier dynamics and transport in Te-doped GaAsSb and GaAsSbN nanowires by correlating ultrafast terahertz spectroscopy and optoelectronic characterization

Recent advances in the growth of III-V semiconductor nanowires (NWs) hold great promise for nanoscale optoelectronic device applications. It is established that a small amount of nitrogen (N) incorporation in III-V semiconductor NWs can effectively red-shift their wavelength of operation and tailor their electronic properties for specific applications. Still, understanding the impact of N incorporation on non-equilibrium charge carrier dynamics and transport in semiconducting NWs is critical in achieving efficient semiconducting NW devices. In this work, ultrafast optical pump-terahertz probe spectroscopy has been used to study non-equilibrium carrier dynamics and transport in Te-doped GaAsSb and dilute nitride GaAsSbN NWs, with the goal of correlating these results with electrical characterization of their equilibrium photo-response under bias and low-frequency noise characteristics. Nitrogen incorporation in GaAsSb NWs led to a significant increase in the carrier scattering rate, resulting in a severe reduction in carrier mobility. Carrier recombination lifetimes of 33 ± 1 picoseconds (ps) and 147 ± 3 ps in GaAsSbN and GaAsSb NWs, respectively, were measured. The reduction in the carrier lifetime and photoinduced optical conductivities are due to the presence of N-induced defects, leading to deterioration in the electrical and optical characteristics of dilute nitride NWs relative to the non-nitride NWs. Finally, we observed a very fast rise time of ~2 ps for both NW materials, directly impacting their potential use as high-speed photodetectors.

36 MATERIALS SCIENCE↗

XAFS and XEOL of tetramesityldigermene - An electronic structure study of a heavy group 14 ethylene analogue

Digermene, the germanium analogue of ethylene, has a multiple bonding motif that differs greatly from that of alkenes and exhibits no pure σ or π type bonds. The electronic structure of digermenes is difficult to study experimentally due to their reactivity, and is computationally challenging because of their shallow potential energy surfaces. Using X-ray absorption near edge structures at both the germanium K and L edges we have been able to directly probe the unoccupied electronic states, or the lowest unoccupied molecular orbital (LUMO), and LUMO+ etc. in the Ge=Ge bond of tetramesityldigermene. We have demonstrated that the LUMO, LUMO+, etc. are composed of hybrid Ge 4s and 4p orbitals. Additionally, our data suggest that the LUMO exhibits relatively more Ge 4s character, whereas the LUMO+ and LUMO+2 exhibit relatively more Ge 4p character. An X-ray excited optical luminescence study of Ge 2 Mes 4 revealed one broad optical emission band at 620 nm, which is significantly red shifted compared to the known energy gap of this molecular germanium compound.

Ward, Matthew J.↗

High harmonic generation in mixed XUV and NIR fields at a free-electron laser

Abstract We present the results of an experiment investigating the generation of high-order harmonics by a femtosecond near-infrared (NIR) laser pulse in the presence of an extreme ultraviolet (XUV) field provided by a free-electron laser (FEL), a process referred to as XUV-assisted high-order harmonic generation (HHG). Our experimental findings show that the XUV field can lead to a small enhancement in the harmonic yield when the XUV and NIR pulses overlap in time, while a strong decrease of the HHG yield and a red shift of the HHG spectrum is observed when the XUV precedes the NIR pulse. The latter observations are in qualitative agreement with model calculations that consider the effect of a decreased number of neutral emitters but are at odds with the predicted effect of the correspondingly increased ionization fraction on the phase matching. Our study demonstrates the technical feasibility of XUV-assisted HHG experiments at FELs, which may provide new avenues to investigate correlation-driven electron dynamics as well as novel ways to study and control propagation effects and phase matching in HHG.

47 OTHER INSTRUMENTATION↗

Low-frequency Raman signature of Ag-intercalated few-layer MoS 2

Density functional theory based calculations and experimental analysis on a limited number of real samples are performed to study how the presence of silver intercalated in the van der Waals gap of few-layer MoS 2 affects the low-frequency Raman active modes of this material. Silver is found to predominantly affect the breathing-like and shear-like vibrational modes of MoS 2 . These modes correspond to quasi-rigid movements of each individual layer with a restoring force (and, in turn, frequency) that is determined by modulations in the weak interlayer interactions. Noticeable red-shifts with increasing Ag concentration are found for all low-frequency modes. This finding indicates the potential for low-frequency vibrations as useful gauges for practical determination of silver concentration using low-frequency Raman spectroscopy. Finally, this work also describes a semi-classical linear chain model that allows to extrapolate results to a large number of layers. Further, first-principles calculations show how Raman spectroscopy can be used to characterize the quality of the two-dimensional interface between MoS 2 and a silver substrate.

36 MATERIALS SCIENCE↗

Gallium-doped zinc oxide: nonlinear reflection and transmission measurements and modeling in the ENZ region

Abstract Strong nonlinear materials have been sought after for decades for applications in telecommunications, sensing, and quantum optics. Gallium-doped zinc oxide is a II–VI transparent conducting oxide that shows promising nonlinearities similar to indium tin oxide and aluminum-doped zinc oxide for the telecommunications band. Here we explore its nonlinearities in the epsilon near zero (ENZ) region and show n 2,eff values on the order of 4.5 × 10 −3 cm 2 GW −1 for IR pumping on 200–300 nm thin films. Measuring nonlinear changes in transmission and reflection with a white light source probe in the near-IR while exciting in the near-IR provides data in both time and wavelength. Three films varying in thickness, optical loss, and ENZ crossover wavelength are numerically modeled and compared to experimental data showing agreement for both dispersion and temporal relaxation. In addition, we discuss optimal excitation and probing wavelengths occur around ENZ for thick films but are red-shifted for thin films where our model provides an additional degree of freedom to explore. Obtaining accurate nonlinear measurements is a difficult and time-consuming task where our method in this paper provides experimental and modeled data to the community for an ENZ material of interest.

Ball, Adam (ORCID:0000000318167813)↗

Quantifying resolution in cosmological N- body simulations using self-similarity

ABSTRACT We demonstrate that testing for self-similarity in scale-free simulations provides an excellent tool to quantify the resolution at small scales of cosmological N-body simulations. Analysing two-point correlation functions measured in simulations using abacus , we show how observed deviations from self-similarity reveal the range of time and distance scales in which convergence is obtained. While the well-converged scales show accuracy below 1 per cent, our results show that, with a small force softening length, the spatial resolution is essentially determined by the mass resolution. At later times, the lower cut-off scale on convergence evolves in comoving units as a−1/2 (a being the scale factor), consistent with a hypothesis that it is set by two-body collisionality. A corollary of our results is that N-body simulations, particularly at high red-shift, contain a significant spatial range in which clustering appears converged with respect to the time-stepping and force softening but has not actually converged to the physical continuum result. The method developed can be applied to determine the resolution of any clustering statistic and extended to infer resolution limits for non-scale-free simulations.

79 ASTRONOMY AND ASTROPHYSICS↗

Dark Energy Survey Year 1 Results: Cross-Correlation Redshifts - Methods and Systematics Characterization

We use numerical simulations to characterize the performance of a clustering-based method to calibrate photometric redshift biases. In particular, we cross-correlate the weak lensing (WL) source galaxies from the Dark Energy Survey Year 1 (DES Y1) sample with redMaGiC galaxies (luminous red galaxies with secure photometric red- shifts) to estimate the redshift distribution of the former sample. The recovered redshift distributions are used to calibrate the photometric redshift bias of standard photo-z methods applied to the same source galaxy sample. We also apply the method to three photo-z codes run in our simulated data: Bayesian Photometric Redshift (BPZ), Directional Neighborhood Fitting (DNF), and Random Forest-based photo-z (RF). We characterize the systematic uncertainties of our calibration procedure, and find that these systematic uncertainties dominate our error budget. The dominant systematics are due to our assumption of unevolving bias and clustering across each redshift bin, and to differences between the shapes of the redshift distributions derived by clustering vs photo-z's. The systematic uncertainty in the mean redshift bias of the source galaxy sample is z ≲ 0.02, though the precise value depends on the redshift bin under consideration. Here, we discuss possible ways to mitigate the impact of our dominant systematics in future analyses.

79 ASTRONOMY AND ASTROPHYSICS↗

Unraveling trace anomaly of supradense matter via neutron star compactness scaling

The trace anomaly Δ ≡ 1/3 −𝑃/𝜖 =1/3 −𝜙 quantifies the possibly broken conformal symmetry in supradense matter under pressure 𝑃 at energy density 𝜖. Perturbative QCD (pQCD) predicts a vanishing Δ at extremely high energy or baryon densities when the conformal symmetry is realized but its behavior at intermediate densities reachable in neutron stars (NSs) is still very uncertain. The extraction of Δ from NS observations strongly depends on the employed model for nuclear equation of state (EOS). Using the IPAD-TOV method based on an intrinsic and perturbative analysis of the dimensionless (IPAD) Tolman-Oppenheimer-Volkoff (TOV) equations that are further verified numerically by using 10 5 EOSs generated randomly with a metamodel in a very broad EOS parameter space constrained by terrestrial nuclear experiments and astrophysical observations, here we first show that the compactness 𝜉 ≡ 𝐺⁡𝑀 NS /𝑅⁢𝑐 2 ≡ 𝑀 NS /𝑅 of a NS with mass 𝑀 NS and radius 𝑅 scales very accurately with $\bar{Π}$ c ≡ $Π$ c · (1 +18⁢X/25) ≡ X/(1 +3⁢X 2 +4⁢X) · (1 +18⁢X/25) where X ≡ 𝜙 c = 𝑃 c /𝜖 c is the ratio of pressure over energy density at NS centers. The scaling of NS compactness thus enables one to readily read off the central trace anomaly Δ c = 1/3 −X directly from the observational data of either the mass-radius or red-shift measurements. Finally, we then demonstrate indeed that the available NS data themselves from recent X-ray and gravitational wave observations can determine model insensitively the trace anomaly as a function of energy density in NS cores, providing a stringent test of existing NS models and a clear guidance in a new direction for further understanding the nature and EOS of supradense matter.

nuclear astrophysics↗

Thomson Scattering with Gain

Thomson-scattering signals can be significantly modified by convective gains associated with the stimulated Raman scattering and stimulated Brillouin scattering instabilities as the scattered light traverses the probe beam. Gain results in amplification and narrowing of the red-shifted (i.e., Stokes) scattered light, whereas blue-shifted (anti-Stokes) features are depleted and broadened, making the relative prominence of these features a key signature of gain. Not accounting for instability growth has been a ubiquitous source of error in previous Thomson-scattering measurements.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Experimental observation of a Raman-induced temporal waveguide

The formation of a Raman-induced temporal waveguide is demonstrated by launching short pump and probe pulses inside a photonic crystal fiber. The pump pulse creates a fundamental soliton whose speed changes continuously owing to its deceleration through the Raman-induced red shift of its spectrum. The spectrum of the probe pulse is blue-shifted to ensure that the two pulses move at the same speed and follow the same trajectory over the entire length of the fiber. Furthermore, the output wavelengths of the pump and probe pulses depend on the peak power of input pump pulses and their measured values agree with the predictions based on the dispersion data. Numerical modeling also shows good agreement with the experimental results.

74 ATOMIC AND MOLECULAR PHYSICS↗

Localization landscape theory of disorder in semiconductors. II. Urbach tails of disordered quantum well layers

Urbach tails in semiconductors are often associated to effects of compositional disorder. The Urbach tail observed in InGaN alloy quantum wells of solar cells and LEDs by biased photocurrent spectroscopy is shown to be characteristic of the ternary alloy disorder. The broadening of the absorption edge observed for quantum wells emitting from violet to green (indium content ranging from 0% to 28%) corresponds to a typical Urbach energy of 20 meV. A three-dimensional absorption model is developed based on a recent theory of disorder-induced localization which provides the effective potential seen by the localized carriers without having to resort to the solution of the Schrödinger equation in a disordered potential. This model incorporating compositional disorder accounts well for the experimental broadening of the Urbach tail of the absorption edge. For energies below the Urbach tail of the InGaN quantum wells, type-II well-to-barrier transitions are observed and modeled. This contribution to the below-band-gap absorption is particularly efficient in near-ultraviolet emitting quantum wells.When reverse biasing the device, the well-to-barrier below-band-gap absorption exhibits a red-shift, while the Urbach tail corresponding to the absorption within the quantum wells is blue-shifted, due to the partial compensation of the internal piezoelectric fields by the external bias. The good agreement between the measured Urbach tail and its modeling by the localization theory thus demonstrates the applicability of the latter to compositional disorder effects in nitride semiconductors.

14 SOLAR ENERGY↗

Multi-GeV wakefield acceleration in a plasma-modulated plasma accelerator

We investigate the accelerator stage of a plasma-modulated plasma accelerator (P-MoPA) [Jakobsson , ] using both the paraxial wave equation and particle-in-cell (PIC) simulations. We show that adjusting the laser and plasma parameters of the modulator stage of a P-MoPA allows the temporal profile of pulses within the pulse train to be controlled, which in turn allows the wake amplitude in the accelerator stage to be as much as 72 % larger than that generated by a plasma beat-wave accelerator with the same total drive laser energy. Our analysis shows that Rosenbluth-Liu detuning is unimportant in a P-MoPA if the number of pulses in the train is less than ∼ 30 , and that this detuning is also partially counteracted by increased red-shifting, and hence increased pulse spacing, towards the back of the train. An analysis of transverse mode oscillations of the driving pulse train is found to be in good agreement with 2D (Cartesian) PIC simulations. PIC simulations demonstrating energy gains of ∼ 1.5 GeV ( ∼ 2.5 GeV ) for drive pulse energies of 2.4 J ( 5.0 J ) are presented. Our results suggest that P-MoPAs driven by few-joule, picosecond pulses, such as those provided by high-repetition-rate thin-disk lasers, could accelerate electron bunches to multi-GeV energies at pulse repetition rates in the kilohertz range. Published by the American Physical Society 2024

van de Wetering, J. J. (ORCID:0000000303292355)↗

Crystal structure of the fluorescent protein from Dendronephthya sp. in both green and photoconverted red forms

The fluorescent protein from Dendronephthya sp. (DendFP) is a member of the Kaede-like group of photoconvertible fluorescent proteins with a His62-Tyr63-Gly64 chromophore-forming sequence. Upon irradiation with UV and blue light, the fluorescence of DendFP irreversibly changes from green (506 nm) to red (578 nm). The photoconversion is accompanied by cleavage of the peptide backbone at the C α —N bond of His62 and the formation of a terminal carboxamide group at the preceding Leu61. The resulting double C α =C β bond in His62 extends the conjugation of the chromophore π system to include imidazole, providing the red fluorescence. Here, the three-dimensional structures of native green and photoconverted red forms of DendFP determined at 1.81 and 2.14 Å resolution, respectively, are reported. This is the first structure of photoconverted red DendFP to be reported to date. The structure-based mutagenesis of DendFP revealed an important role of positions 142 and 193: replacement of the original Ser142 and His193 caused a moderate red shift in the fluorescence and a considerable increase in the photoconversion rate. It was demonstrated that hydrogen bonding of the chromophore to the Gln116 and Ser105 cluster is crucial for variation of the photoconversion rate. The single replacement Gln116Asn disrupts the hydrogen bonding of Gln116 to the chromophore, resulting in a 30-fold decrease in the photoconversion rate, which was partially restored by a further Ser105Asn replacement.

59 BASIC BIOLOGICAL SCIENCES↗

Effects of Local Environment on the Ultra-Fast Carrier Dynamics of Photo-Excited 2D Transition Metal Dichalcogenides

Layered transition metal dichalcogenides (TMDs) represent a diverse, emerging source of two-dimensional (2D) nanostructures with broad application in optoelectronics and energy. In particular, tungsten disulfide (WS2) is an efficient visible light absorber with relatively high carrier mobilities and catalytic activity towards hydrogen evolution. While explanation of the quantum confinement and excitonic effects governing TMD optoelectronic properties has progressed in recent years, less is known about the ultra-fast photoresponse and carrier dynamics following light excitation. This work utilizes transient absorption spectroscopy, with pump tunability and broadband visible probing, to monitor the carrier dynamics of both CVD-grown monolayer and solution exfoliated WS2. Picosecond-scale features include simultaneous bleaching of excitonic states and a red-shifted absorption spectrum attributed to bandgap renormalization, while free carriers, defect trapped carriers, and recombination signatures are apparent at increasing pico- to nanosecond lifetimes. Features associated with excitons, trions, and photo-excited carriers exhibit strong dependence on local environmental factors. Moisture, oxygen, chemical dopants, and dielectric environment strongly affect the strength and decay lifetimes of these photo-excited species. These results highlight the importance of understanding and controlling these local environmental factors to the rational design and implementation of 2D TMDs optoelectronic device platforms.

2D materials↗