Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RAMAN SPECTRA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Growth, defect structure, and THz application of stoichiometric lithium niobate

Owing to the extraordinary richness of its physical properties, congruent lithium niobate has attracted multidecade-long interest both for fundamental science and applications. The combination of ferro-, pyro-, and piezoelectric properties with large electro-optic, acousto-optic, and photoelastic coefficients as well as the strong photorefractive and photovoltaic effects offers a great potential for applications in modern optics. To provide powerful optical components in high energy laser applications, tailoring of key material parameters, especially stoichiometry, is required. This paper reviews the state of the art of growing large stoichiometric LiNbO{sub 3} (sLN) crystals, in particular, the defect engineering of pure and doped sLN with emphasis on optical damage resistant (ODR) dopants (e.g., Mg, Zn, In, Sc, Hf, Zr, Sn). The discussion is focused on crystals grown by the high temperature top seeded solution growth (HTTSSG) technique using alkali oxide fluxing agents. Based on high-temperature phase equilibria studies of the Li{sub 2}O–Nb{sub 2}O{sub 5}–X{sub 2}O ternary systems (X = Na, K, Rb, Cs), the impact of alkali homologue additives on the stoichiometry of the lithium niobate phase will be analyzed, together with a summary of the ultraviolet, infrared, and far-infrared absorption spectroscopic methods developed to characterize the composition of the crystals. It will be shown that using HTTSSG from K{sub 2}O containing flux, crystals closest to the stoichiometric composition can be grown characterized by a UV-edge position of at about 302 nm and a single narrow hydroxyl band in the IR with a linewidth of less than 3 cm{sup −1} at 300 K. The threshold concentrations for ODR dopants depend on crystal stoichiometry and the valence of the dopants; Raman spectra, hydroxyl vibration spectra, and Z-scan measurements prove to be useful to distinguish crystals below and above the photorefractive threshold. Crystals just above the threshold are preferred for most nonlinear optical applications apart holography and have the additional advantage to minimize the absorption even in the far-infrared (THz) range. The review also provides a discussion on the progress made in the characterization of non-stoichiometry related intrinsic and extrinsic defect structures in doped LN crystals, with emphasis on ODR-ion-doped and/or closely stoichiometric systems, based on both spectroscopic measurements and theoretical modelling, including the results of first principles quantum mechanical calculations on hydroxyl defects. It will also be shown that new perspective applications, e.g., the generation of high energy THz pulses with energies on the tens-of-mJ scale, are feasible with ODR-doped sLN crystals if optimal conditions, including the contact grating technique, are applied.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Correlation between surface phonon mode and luminescence in nanocrystalline CdS thin films: An effect of ion beam irradiation

The influence of swift heavy ion irradiation (SHII) on surface phonon mode (SPM) and green emission in nanocrystalline CdS thin films grown by chemical bath deposition is studied. The SHII of nanocrystalline CdS thin films is carried out using 70 MeV Ni ions. The micro Raman analysis shows that asymmetry and broadening in fundamental longitudinal optical (LO) phonon mode increases systematically with increasing ion fluence. To analyze the role of phonon confinement, spatial correlation model (SCM) is fitted to the experimental data. The observed deviation of SCM to the experimental data is further investigated by fitting the micro Raman spectra using two Lorentzian line shapes. It is found that two Lorentzian functions (LFs) provide better fitting than SCM fitting and facilitate to identify the contribution of SPM in the observed distortion of LO mode. The behavior of SPM as a function of ion fluence is studied to correlate the observed asymmetry (Γ{sub a}/Γ{sub b}) and full width at half maximum of LO phonon mode and to understand the SHII induced enhancement of SPM. The ion beam induced interstitial and surface state defects in thin films, as observed by photoluminescence (PL) spectroscopy studies, may be the underlying reason for enhancement in SPM. PL studies also show enhancement in green luminescence with increase in ion fluence. PL analysis reveals that the variation in population density of surface state defects after SHII is similar to that of SPM. The correlation between SPM and luminescence and their dependence on ion irradiation fluence is explained with the help of thermal spike model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Raman scattering studies of strain effects in (100) and (311)B GaAs{sub 1−x}Bi{sub x} epitaxial layers

We report room-temperature Raman studies of strained (100) and (311)B GaAs{sub 1−x}Bi{sub x} epitaxial layers for x ≤ 0.039. The Raman spectra exhibit a two-mode behavior, as well as disorder-activated GaAs-like phonons. The experimental results show that the GaAs-like LO(Γ) mode experiences a strong composition-dependent redshift as a result of alloying. The peak frequency decreases linearly from the value for pure GaAs (∼293 cm{sup −1}) with the alloyed Bi fraction x and the introduced in-plane lattice strain ε{sub ∥}, by Δω{sub LO}=Δω{sub alloy}−Δω{sub strain}. X-ray diffraction measurements are used to determine x and ε{sub ∥} allowing Δω{sub alloy} to be decoupled and is estimated to be −12(±4) cm{sup −1}/x for (100) GaAs{sub 1−x}Bi{sub x}. Δω{sub LO} is measured to be roughly double for samples grown on (311)B-oriented substrates to that of (100) GaAs. This large difference in redshift is accounted for by examining the Bi induced strain, effects from alloying, and defects formed during high-index (311)B crystal growth.

36 MATERIALS SCIENCE↗

Gas phase synthesis of non-bundled, small diameter single-walled carbon nanotubes with near-armchair chiralities

We present a floating catalyst synthesis route for individual, i.e., non-bundled, small diameter single-walled carbon nanotubes (SWCNTs) with a narrow chiral angle distribution peaking at high chiralities near the armchair species. An ex situ spark discharge generator was used to form iron particles with geometric number mean diameters of 3–4 nm and fed into a laminar flow chemical vapour deposition reactor for the continuous synthesis of long and high-quality SWCNTs from ambient pressure carbon monoxide. The intensity ratio of G/D peaks in Raman spectra up to 48 and mean tube lengths up to 4 μm were observed. The chiral distributions, as directly determined by electron diffraction in the transmission electron microscope, clustered around the (n,m) indices (7,6), (8,6), (8,7), and (9,6), with up to 70% of tubes having chiral angles over 20°. The mean diameter of SWCNTs was reduced from 1.10 to 1.04 nm by decreasing the growth temperature from 880 to 750 °C, which simultaneously increased the fraction of semiconducting tubes from 67% to 80%. Limiting the nanotube gas phase number concentration to ∼10{sup 5 }cm{sup −3} prevented nanotube bundle formation that is due to collisions induced by Brownian diffusion. Up to 80% of 500 as-deposited tubes observed by atomic force and transmission electron microscopy were individual. Transparent conducting films deposited from these SWCNTs exhibited record low sheet resistances of 63 Ω/□ at 90% transparency for 550 nm light.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Two new zincophosphates, (H{sub 3}NCH{sub 2}CH{sub 2}NH{sub 3}){sub 2}[Zn({mu}-PO{sub 4}){sub 2}] and (NH{sub 4})[(H{sub 3}N)Zn{l_brace}({mu}-PO{sub 4})Zn{r_brace}{sub 3}]: Crystal structures and relationships to similar open framework zinco- and aluminophospates

Two new zincophosphates, bis(ethylenediammonim) catena-bis({mu}-phosphato)zincate, (H{sub 3}NCH{sub 2}CH{sub 2}NH{sub 3}){sub 2}[Zn({mu}-PO{sub 4}){sub 2}] (1), and ammonium ammine-tris({mu}-phosphato)tetrazincate, (NH{sub 4})[(H{sub 3}N)Zn{l_brace}({mu}-PO{sub 4})Zn{r_brace}{sub 3}] (2), were synthesized under hydrothermal conditions and their crystal structures were determined by single-crystal X-ray diffraction analysis. The crystal structure of 1 consists of infinite macroanionic ZnP{sub 2}O{sub 8}{sup 4-} chains, running along the [0 0 1] direction, and diprotonated ethylenediammonium cations, H{sub 2}en{sup 2+}. The crystal structure of 2 is built up from ZnO{sub 4}, Zn(NH{sub 3})O{sub 3} and PO{sub 4} vertex-sharing tetrahedra connected to form an open 3D framework. The ammonium groups, NH{sub 4}{sup +}, are located in the channels formed by 8M-rings extending along [1 0 0]. In order to study vibrational behavior of H{sub 2}en{sup 2+} and NH{sub 4}{sup +} cations, NH{sub 3} molecules in 1 and 2, single-crystal Raman spectra were obtained. Structural, chemical and topological similarities to the other open framework zinco- and aluminophosphates incorporating different guest species are discussed. - Graphical Abstract: Structure of 1 (left): polyhedral (a) and ORTEP-like (b) representation of the ZnP{sub 2}O{sub 8}{sup 4-} chain with two H{sub 2}en{sup 2+} cations. Structure of 2 (right): polyhedral structure of the layers I and II seen along [1 0 0] (c-axis is vertical). Highlights: > Synthesis under hydrothermal conditions and the crystal structures of two new zincophosphates. > Compound 1 is a new inorganic-organic hybrid compound. > Structure of 1 consists of infinite macroanionic ZnP{sub 2}O{sub 8}{sup 4-} chains and H{sub 2}en{sup 2+} (en=ethylenediamine) cations. > Structure of 2 is a novel 3D open framework structure with 8M channels. > Structure of 2 is the first 3D zincophosphate which incorporates both, the coordinated NH{sub 3} molecule and NH{sub 4}{sup +} cations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multiferroic and magnetoelectric properties of CoFe{sub 2}O{sub 4}/Pb{sub 1−x}Sr{sub x}TiO{sub 3} composite films

To realize multiferroic and magnetoelectric properties, bi-layered nanocomposite films consisting of CoFe{sub 2}O{sub 4} (CFO)/Pb{sub 1−x}Sr{sub x}TiO{sub 3} (PST) phases (x = 0.1, 0.2, and 0.3) have been deposited on Pt/TiO{sub 2}/SiO{sub 2}/Si substrate by using a metallo-organic decomposition process. Both the PST perovskite and the CFO spinel phases are confirmed from X-ray diffraction patterns and Raman spectra of the composite films. The composite films exhibit room temperature multiferroic properties. The values of saturation magnetization (M{sub s}), remanent magnetization (M{sub r}), and coercive field (H{sub c}) of the composite films are in the range of 108–119 kA/m, 42–51 kA/m, and 44.5–64.1 kA/m, respectively. In addition, the saturation polarization (P{sub s}), remanent polarization (P{sub r}), and electrical coercive field (E{sub c}) are observed in the range of 11.3–14.4 μC/cm{sup 2}, 2.9–4.8 μC/cm{sup 2}, and 56–59.5 kV/cm, respectively. The dielectric response in the presence of applied magnetic field, H{sub dc} ∼ 238.6 kA/m shows a high magnetocapacitance value ∼385% at frequency 100 kHz for CFO/PST composite film with x = 0.1. The maximum magnetoelectric voltage co-efficient value, α{sub E} ∼ 380 kV/(m × T) has been achieved in the composite films with x = 0.1. The influence of elastic/and or interfacial strain on multiferroic magnetoelectric properties is evident from the results.

36 MATERIALS SCIENCE↗

Brillouin function characteristics for La-Co substituted barium hexaferrites

La-Co substituted barium hexaferrites with the chemical formula of Ba{sub 1−x}La{sub x}Fe{sub 12−x}Co{sub x}O{sub 19} (x = 0.0, 0.1, 0.3, and 0.5), prepared by a conventional ceramic method, were systematically investigated by Raman spectra, X-ray photoelectron spectroscopy, Rietveld refinement of X-ray diffraction patterns, and vibrating sample magnetometer. The result manifests that all the compounds are crystallized in magnetoplumbite hexagonal structure. Trivalent cobalt ions prevailingly occupy the 2a, 4f{sub 1}, and 12k sites. According to Néel model of collinear-spin ferrimagnetism, the molecular-field coefficients ω{sub bf2}, ω{sub kf1}, ω{sub af1}, ω{sub kf2}, and ω{sub bk} of La-Co substituted barium hexaferrites have been calculated using the nonlinear fitting method, and the magnetic moment of five sublattices (2a, 2b, 4f{sub 1}, 4f{sub 2}, and 12k) versus temperature T has been also investigated. The fitting results are coincided well with the experimental data. Moreover, with the increase of La-Co substitution amount x, the molecular-field coefficients ω{sub bf2} and ω{sub af1} decrease constantly, while the molecular-field coefficients ω{sub kf1}, ω{sub kf2}, and ω{sub bk} show a slight change.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High-pressure synthesis and crystal structure of the lithium borate HP-LiB{sub 3}O{sub 5}

The new lithium borate HP-LiB{sub 3}O{sub 5} was synthesized under high-pressure/high-temperature conditions of 6 GPa and 1050 deg. C in a multianvil press with a Walker-type module. The compound crystallizes in the space group Pnma (no. 62) with the lattice parameters a=829.7(2), b=759.6(2), and c=1726.8(4) pm (Z=16). The high-pressure compound HP-LiB{sub 3}O{sub 5} is built up from a three-dimensional network of BO{sub 4} tetrahedra and BO{sub 3} groups, which incorporates Li{sup +} ions in channels along the b-axis. Band assignments of measured IR- and Raman spectra were done via quantum-mechanical calculations. Additionally, the thermal behavior of HP-LiB{sub 3}O{sub 5} was investigated. - Graphical abstract: The new high-pressure compound HP-LiB{sub 3}O{sub 5} is built up from a three-dimensional network of BO4 tetrahedra and BO{sub 3} groups, which incorporates Li{sup +} ions in channels along the b-axis. In this paper, the synthesis, the crystal structure, and the properties of HP-LiB{sub 3}O{sub 5} are described. Highlights: > Synthesis of a new lithium borate with the composition HP-LiB{sub 3}O{sub 5} at high pressure. > In contrast to the non-centrosymmetric phase LiB{sub 3}O{sub 5}, this high-pressure phase is centrosymmetric. > First example of ternary alkali borates exhibiting threefold bridging oxygen atoms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Coherent phonon modes of crystalline and amorphous Ge{sub 2}Sb{sub 2}Te{sub 5} thin films: A fingerprint of structure and bonding

Femtosecond optical pump-probe measurements have been made upon epitaxial, polycrystalline, and amorphous thin films of Ge{sub 2}Sb{sub 2}Te{sub 5} (GST). A dominant coherent optical phonon mode of 3.4 THz frequency is observed in time-resolved anisotropic reflectance (AR) measurements of epitaxial films, and is inferred to have 3-dimensional T{sub 2}-like character based upon the dependence of its amplitude and phase on pump and probe polarization. In contrast, the polycrystalline and amorphous phases exhibit a comparatively weak mode of about 4.5 THz frequency in both reflectivity (R) and AR measurements. Raman microscope measurements confirm the presence of the modes observed in pump-probe measurements, and reveal additional modes. While the Raman spectra are qualitatively similar for all three phases of GST, the mode frequencies are found to be different within experimental error, ranging from 3.2 to 3.6 THz and 4.3 to 4.7 THz, indicating that the detailed crystallographic structure has a significant effect upon the phonon frequency. While the lower frequency (3.6 THz) mode of amorphous GST is most likely associated with GeTe{sub 4} tetrahedra, modes in epitaxial (3.4 THz) and polycrystalline (3.2 THz) GST could be associated with either GeTe{sub 6} octahedra or Sb-Te bonds within defective octahedra. The more polarizable Sb-Te bonds are the most likely origin of the higher frequency (4.3–4.7 THz) mode, although the influence of Te-Te bonds cannot be excluded. The effect of high pump fluence, which leads to irreversible structural changes, has been explored. New modes with frequency of 3.5/3.6 THz in polycrystalline/amorphous GST may be associated with Sb{sub 2}Te{sub 3} or GeTe{sub 4} tetrahedra, while a 4.2 THz mode observed in epitaxial GST may be related to segregation of Sb.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phase coexistence and high electrical properties in (K{sub x}Na{sub 0.96-x}Li{sub 0.04})(Nb{sub 0.85}Ta{sub 0.15})O{sub 3} piezoelectric ceramics

(K{sub x}Na{sub 0.96-x}Li{sub 0.04})(Nb{sub 0.85}Ta{sub 0.15})O{sub 3} lead-free piezoelectric ceramics were produced by conventional solid-state reaction method. The effects of K/Na ratio on the phase transitional behavior, Raman spectrum, microstructure, and dielectric, piezoelectric, and ferroelectric properties of the ceramics have been investigated. The phase structure of the ceramics undergoes a transition from orthorhombic to tetragonal phase with increasing x. A double-degenerate symmetric O-Nb-O stretching vibration v{sub 1} and a triply degenerate symmetric O-Nb-O bending vibration v{sub 5} are detected as relatively strong scattering in the Raman spectra. The peak shifts of v{sub 5} and v{sub 1} modes all have a discontinuity with x between 0.42 and 0.46, which may suggest the coexistence of orthorhombic and tetragonal phases in this range. Properly modifying x reduces the sintering temperature, promotes the grain growth behavior, and improves the density of the ceramics. The polymorphic phase transition (at T{sub o-t}) is shifted to near room temperature by increasing x to 0.44 (K/Na ratio of about 0.85:1), and the coexistence of orthorhombic and tetragonal phases in the ceramics at x=0.44 results in the optimized electrical properties (d{sub 33}=291 pC/N, k{sub p}=0.54, {epsilon}{sub r}=1167, tan {delta}=0.018, T{sub o-t}=35 deg. C, T{sub C}=351 deg. C, P{sub r}=27.65 {mu}C/cm{sup 2}, and E{sub c}=8.63 kV/cm). The results show that the equal K/Na ratio is not an essential condition in obtaining optimized electrical properties in (K{sub x}Na{sub 0.96-x}Li{sub 0.04})(Nb{sub 0.85}Ta{sub 0.15})O{sub 3} ceramics.

36 MATERIALS SCIENCE↗

Facile synthesis and microwave absorbability of C@Ni–NiO core–shell hybrid solid sphere and multi-shelled NiO hollow sphere

We reported the preparation of C@Ni–NiO core–shell hybrid solid spheres or multi-shelled NiO hollow spheres by combining a facile hydrothermal route with a calcination process in H{sub 2} or air atmosphere, respectively. The synthesized C@Ni–NiO core–shell solid spheres with diameters of approximately 2–6 μm were in fact built from dense NiO nanoparticles coated by random two-dimensional metal Ni nanosheets without any visible pores. The multi-shelled NiO hollow spheres were built from particle-like ligaments and there are a lot of pores with size of several nanometers on the surface. Combined Raman spectra with X-ray photoelectron spectra (XPS), it suggested that the defects in the samples play a limited role in the dielectric loss. Compared with the other samples, the permeability of the samples calcined in H{sub 2} and air was increased slightly and the natural resonance frequency shifted to higher frequency (7, 11 and 14 GHz, respectively), leading to an enhancement of microwave absorption property. For the sample calcined in H{sub 2}, an optimal reflection loss less than − 10 was obtained at 7 GHz with a matching thickness of 5.0 mm. Our study demonstrated the potential application of C@Ni–NiO core–shell hybrid solid sphere or multi-shelled NiO hollow sphere as a more efficient electromagnetic (EM) wave absorber. - Highlights: • C@Ni–NiO core–shell hybrid solid sphere was synthesized by a facile method. • Multi-shelled NiO hollow sphere was synthesized by a facile method. • It suggested that the defects in the samples play a limited role in dielectric loss. • The permeability of the samples calcined in H{sub 2} and air was increased. • Microwave absorbability of C@Ni–NiO core–shell hybrid solid sphere was investigated.

36 MATERIALS SCIENCE↗

Electronic Structures and Magnetic Properties of Transition Metal Doped CsPbI{sub 3} Perovskite Compounds by First-Principles Calculation

Transition metal doped cesium lead halide (CsPbI{sub 3}) perovskite compounds were studied for application in photovoltaic solar cells. Electronic structures, chemical shifts of {sup 207}Pb and {sup 127}I-NMR, vibration modes in infrared and Raman spectra of transition metals (Mn{sup 2+}, Fe{sup 2+} or Cu{sup 2+})-doped CsPbI{sub 3} perovskite compounds were studied by the first-principles calculation using density functional theory. The CsPb(Fe)I{sub 3} perovskite crystals had a slight perturbation of crystal field in the coordination structure. The electron density distribution was delocalized on the 5p orbital of I atom, the 3d orbital of Fe atom and the 6p orbital of Pb atom. The first excited process was based on ligand metal charge transfer from the 5p orbital on I atom to the 3d orbital of Fe atom. The chemical shifts of {sup 127}I-NMR were associated with the electron correlation of electron-nuclear spin interaction and nuclear quadrupole interactions based on electron field graduate. The asymmetric vibrations of Pb–I bonds stretching mode related to electron conductivity with scattering of the carrier diffusion as phonon effectiveness. The slight perturbation of the coordination structure in the CsPb(Fe)I{sub 3} perovskite crystal will improve the photovoltaic and optical properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phonon spectrum and interaction between nanotubes in single-walled carbon nanotube bundles at high pressures and temperatures

The Raman spectra of single-walled carbon nanotubes at temperatures up to 730 K and pressures up to 7 GPa have been measured. The behavior of phonon modes and the interaction between nanotubes in bundles have been studied. It has been found that the temperature shift of the vibrational G mode is completely reversible, whereas the temperature shift of radial breathing modes is partially irreversible and the softening of the modes and narrowing of phonon bands are observed. The temperature shift and softening of radial breathing modes are also observed when samples are irradiated by laser radiation with a power density of 6.5 kW/mm{sup 2}. The dependence of the relative frequency {Omega}/{Omega}{sub 0} for G{sup +} and G{sup -} phonon modes on the relative change A{sub 0}/A in the triangular lattice constant of bundles of nanotubes calculated using the thermal expansion coefficient and compressibility coefficient of nanotube bundles shows that the temperature shift of the G mode is determined by the softening of the C-C bond in nanotubes. An increase in the equilibrium distances between nanotubes at the breaking of random covalent C-C bonds between nanotubes in bundles of nanotubes is in my opinion the main reason for the softening of the radial breathing modes.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

An explanation for laser-induced spallation effect in a-C:H films: Altered phase evolution route caused by hydrogen doping

The laser-induced spalling effect has been recognized as a unique phenomenon for amorphous carbon (a-C) films during laser processing. In this work, the origin of spalling effect was investigated by ablating two different types of a-C film: hydrogenated a-C (a-C:H) and nonhydrogenated a-C with an Nd-yttrium aluminum garnet laser system. Comparisons of ablating results demonstrated that the spalling effect only occurred in a-C:H rather than nonhydrogenated a-C. Laser heating simulation indicated that the temperature distributions in both films after laser pulse are similar with a high temperature gradient in depth direction. Annealing test results, Raman spectra and nanoindentation show that with the increase in annealing temperature, a-C film transforms into grassy carbon directly, while a-C:H experiences two subprocess under heating: the hydrogen mobilization and rearrangement of C-C network at a relatively low temperature range resulting in a denser C-C network and raised film density; the graphitization at high temperature which would lower the film density. We propose that the reason of laser-induced spalling effect in a-C:H might depend on two aspects: (1) the heat source like laser pulse which could produce a high temperature gradient in depth direction within ultrashort time and (2) the unique evolution process of film microstructure under heating. Based on above model, the spalling effect is ascribed to the concentrated stress caused by different structure evolution subprocess at different depth in a-C:H during the laser irradiation. It is remarkable that the conclusions deduced from our model are proven to be in good agreement with our experimental results and the previous articles reported by others.

36 MATERIALS SCIENCE↗

Relationship between the structure and electrical characteristics of diamond-like carbon films

To elucidate the relationship between the structure and the electrical characteristics of diamond-like carbon (DLC) films, DLC films were synthesized in a well-controlled glow discharge with the aid of photoelectrons in an argon/methane atmosphere. The dielectric constant and breakdown strength of the films exhibited opposite behaviors, depending on the total pressure during the synthesis. The product of these two values decreased monotonically as the pressure increased. The Raman spectra were analyzed with a Voigt-type formula. Based on the results, the authors propose the “sp{sup 2} cluster model” for the DLC structure. This model consists of conductive clusters of sp{sup 2} carbons surrounded by a dielectric matrix sea of sp{sup 2} carbon, sp{sup 3} carbon, and hydrogen, and indicates that the dielectric constant of the whole DLC film is determined by the balance between the dielectric constant of the matrix and the total size of the clusters, while the breakdown strength is determined by the reciprocal of the cluster size. The model suggests that a high-κ DLC film can be synthesized at a middle pressure and consists of well-grown sp{sup 2} clusters and a dense matrix. A low-κ DLC film can be synthesized both at low and high pressures. The sp{sup 2} cluster model explains that a low-κ DLC film synthesized at low pressure consists of a dense matrix and a low density of sp{sup 2} clusters, and exhibits a high breakdown strength. On the other hand, a low-κ film synthesized at high pressure consists of a coarse matrix and a high density of clusters and exhibits a low breakdown strength.

36 MATERIALS SCIENCE↗

Co-Al mixed metal oxides/carbon nanotubes nanocomposite prepared via a precursor route and enhanced catalytic property

The present work reported the synthesis of Co-Al mixed metal oxides/carbon nanotubes (CoAl-MMO/CNT) nanocomposite from Co-Al layered double hydroxide/CNTs composite precursor (CoAl-LDH/CNT). The materials were characterized by powder X-ray diffraction (XRD), transmission electron microscopy (TEM), low temperature nitrogen adsorption-desorption experiments, thermogravimetric and differential thermal analyses (TG-DTA), Raman spectra and X-ray photoelectron spectroscopy (XPS). The results revealed that in CoAl-MMO/CNT nanocomposite, the nanoparticles of cobalt oxide (CoO) and Co-containing spinel-type complex metal oxides could be well-dispersed on the surface of CNTs, thus forming the heterostructure of CoAl-MMO and CNTs. Furthermore, as-synthesized CoAl-MMO/CNT nanocomposite was utilized as additives for catalytic thermal decomposition of ammonium perchlorate (AP). Compared to those for pure AP and CoAl-MMO, the peak temperature of AP decomposition for CoAl-MMO/CNT was significantly decreased, which is attributed to the novel heterostructure and synergistic effect of multi-component metal oxides of nanocomposite. - Graphical abstract: Hybrid Co-Al mixed metal oxides/carbon nanotubes nanocomposite showed the enhanced catalytic activity in the thermal decomposition of ammonium perchlorate, as compared to carbon nanotubes and pure Co-Al mixed metal oxides. Highlights: Black-Right-Pointing-Pointer Co-Al mixed metal oxides/carbon nanotubes nanocomposite was synthesized. Black-Right-Pointing-Pointer Co-Al mixed metal oxides consisted of cobalt oxide and Co-containing spinels. Black-Right-Pointing-Pointer Nanocomposite exhibited excellent catalytic activity for the decomposition of AP. Black-Right-Pointing-Pointer The superior catalytic property is related to novel heterostructure and composition.

36 MATERIALS SCIENCE↗

Influence of deposition parameters on the microstructure and properties of nitrogen-doped diamondlike carbon films

CN{sub x} films were prepared on cemented carbide substrates by a pulsed bias arc ion-plating method with two graphite targets and using N{sub 2}/Ar mixture gases. The effects of the deposition parameters, such as substrate negative-bias voltage, duty cycle, and nitrogen flow rate, on the structures and properties of CN{sub x} films were investigated using Raman spectra and nanoindentation. The properties of CN{sub x} films are closely related to the film structures. For CN{sub x} films deposited at a different bias voltage, the CN{sub x} film deposited at a bias voltage of -300 V had the highest hardness. The I{sub D}/I{sub G} ratio and G peak position decreased and then increased with increasing bias voltage, and the minimum values, which correspond to the highest sp{sup 3} content, were obtained at a bias voltage of -300 V. For the CN{sub x} films deposited at different duty cycles, the hardness and elastic modulus decreased with increasing duty cycle. For the CN{sub x} films deposited at different nitrogen flow rates, the results show that first the I{sub D}/I{sub G} ratio decreases and sp{sup 3} content increases with increasing nitrogen flow rate, and then the I{sub D}/I{sub G} ratio increases and sp{sup 3} bond content decreases after the nitrogen flow rate exceeds 10 SCCM (SCCM denotes cubic centimeter per minute at STP). The hardness and elastic modulus of the CN{sub x} film prepared at a nitrogen flow rate of 10 SCCM reached the maximum values of 32.1 and 411.8 GPa, respectively.

36 MATERIALS SCIENCE↗

Synthesis and spectral characteristics of Sr{sub 2}Y{sub 8}(SiO{sub 4}){sub 6}O{sub 2}: Eu polycrystals

Spectral-luminescent characteristics of Sr{sub 2}Y{sub 8}(SiO{sub 4}){sub 6}O{sub 2}: Eu powder crystal phosphor with the apatite structure and high-intensity luminescence of Eu{sup 3+} ions have been studied. The charge state of europium in the samples has been characterized by means of X-ray L{sub 3}-adsorption spectroscopy. It was established that Eu{sup 3+} forms two types of optical centers. Besides, luminescence of Eu{sup 2+}ions was found. Reduction Eu{sup 3+}{yields}Eu{sup 2+} was considered, which may be due to V{sub Sr}{sup ||} vacancy formation in the 4f crystal lattice position and to negative charge transfer by this vacancy to two Eu{sub Y}{sup 3+} ions. Thus, in the silicate lattice there exist inhomogeneously distributed oxygen-deficient centers, which are responsible for nonradiative transfer of excitation energy to Eu{sup 3+} and Eu{sup 2+} ions. To study electron-vibrational interactions in the crystal phosphor samples, their IR and Raman spectra were examined. In the luminescence spectrum of Eu{sup 2+}, a series of low-intensity bands caused by interaction of the 4f{sup 6}5d state of Eu{sup 2+} with silicate lattice vibrations was observed. - Graphical abstract: The scheme of nonradiative transfer over of energy of excitation from oxygen vacancies to ions Eu{sup 2+} and Eu{sup 3+} in Sr{sub 2}Y{sub 8}(SiO{sub 4}){sub 6}O{sub 2}: Eu phosphors. Research Highlights: {yields}In Sr{sub 2}Y{sub 8}(SiO{sub 4}){sub 6}O{sub 2}:Eu phosphors optical centers Eu{sup 2+} and Eu{sup 3+} (two types) are formed. {yields}The 4f{sup 6}5d state of Eu{sup 2+} interacts with the lattice vibrations of Sr{sub 2}Y{sub 8}(SiO{sub 4}){sub 6}O{sub 2}:Eu. {yields}In crystal lattice Sr{sub 2}Y{sub 8} (SiO{sub 4})6O{sub 2}:Eu oxygen vacancies are formed. {yields}Oxygen vacancies nonradiatively transfer the energy of excitation to Eu{sup 2+} and Eu{sup 3+} ions. {yields}Oxygen vacancies are non-uniformly distributed in a phosphorus lattice.

36 MATERIALS SCIENCE↗