Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Power distribution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Gyroharmonic emissions induced by energetic ions in the equatorial plasmasphere

A theoretical investigation shows that MeV ions observed in the plasmasphere which have a power law distribution function possessing strong pitch angle anisotropy can give rise to emissions at frequencies near the harmonics of the ion gyrofrequencies observed in the same region. These emissions are sustained by the low-beta sub c plasma in the plasmasphere. It is found that only emissions with frequencies along the fast magnetosonic branch may occur and that these waves are essentially perpendicularly propagating. Growth is restricted to frequencies immediately below the ion gyroharmonics by the resonance condition and implies line widths of about 0.001 Omega sub alpha. Observations of ion gyroharmonic emissions with spacings of 1/16, 1/8, and 3/16 of the proton gyrofrequency may indicate the existence of energetic ion O(+), O(2+), and O(3+), respectively.

Curtis, S. A.↗

On the physical environment in the nucleus of Centaurus A /NGC 5128/

A model is proposed for the radio and X-ray variability of the nucleus of Centaurus A in which an adiabatically expanding plasma containing a power-law distribution of relativistic electrons produces the radio flux by synchrotron emission, and the X-ray flux by inverse Compton scattering of an ambient distribution of thermal photons. The variability of Centaurus A is shown to be consistent with the expansion of an initially opaque, hot (1000-10,000 K) plasma which eventually becomes optically thin. Radio flares without corresponding X-ray flares are possible in this model because the plasma density decreases during the expansion, allowing radio radiation previously absorbed or suppressed to be observed. Some consequences of the model for the physical environment in galactic nuclei are discussed.

Beall, J. H.↗

Development of preliminary design concept for multifunction display and control system for Orbiter crew station. Task 3: Concept analysis

The access schema developed to access both individual switch functions as well as automated or semiautomated procedures for the orbital maneuvering system and electrical power and distribution and control system discussed and the operation of the system is described. Feasibility tests and analyses used to define display parameters and to select applicable hardware choices for use in such a system are presented and the results are discussed.

Spiger, R. J.↗

Elastic scattering of 400-MeV protons by Pb-208

Cross-section and analyzing-power angular distributions for elastic scattering of 400-MeV protons by Pb-208 have been measured between 3 and 51 deg. Results have been compared to second-order Kerman-McManus-Thaler (1959) calculations of the optical potential. There is evidence that free nucleon-nucleon scattering amplitudes do not adequately describe nucleon propagation in nuclear matter at this energy.

Hutcheon, D. A.↗

A qualitative interpretation of 7 August 1972 impulsive phase flare H alpha line profiles

The considered investigation shows that existing models of the formation of the H-alpha line during flares appear to provide clear qualitative evidence that heating of the H-alpha forming regions of the flare chromosphere in the bright H-alpha kernels observed during the impulsive phase of solar flares is not due primarily to heating by Coulomb collisions of a power-law distribution of 10-100 keV electrons with chromospheric material. It appears rather that some shorter-range process, involving possibly conduction or optically thick radiative transfer, is favored. Such a conclusion is clearly relevant to collisionless confinement modelling. However, much work remains to be done before there will be a basis for quantitatively testing the consistency of the considered picture with chromospheric diagnostics.

Canfield, R. C.↗

The tethered retrievable platform concept and utilization

Main components of the current configuration of a proposed tethered satellite system (TSS) for deploying instrumentation up to 100 km upward or downward from the Orbiter in LEO are described. The TSS consists of the Deployer Module, the Tether, and the Satellite Module, and remains connected to the equipment in the Orbiter bay for the entire mission. The Deployer Module is mounted on a pallet, and has a boom, a tether control mechanism, and a tether control capability, in addition to data acquisition and control systems. The Satellite Module features a thermal control, electrical power and distribution, data management and communication, attitude determination, propulsion, and payload capability. Deployment is unpowered, taking advantage instead of gravity gradients to move the payload from the Orbiter. Safety features include a cutter mechanism to disengage the tether from the Orbiter if retrieval of the payload is judged to endanger the crew and the Orbiter.

Laue, J. H.↗

High voltage distribution and grounding in high power spacecraft

Many space missions proposed for the time period from 1985 to 2000 will require large spacecraft to support the onboard loads. In some cases, large electrical power systems will be needed to supply the electrical/electronic equipment loads. These electronic systems will be used for communications, radar, and experimental equipment for aid to earth's overcrowded communication systems, exploration of new energy resources, space exploration, and eventually to supplement terrestrial electric power utilities. For the near term (1985-1990), some of these systems have power levels to 50 kW. The long-term programs, 1990 to post-2000, could possibly have demands in the order of multimegawatts. The problems which have to be solved to construct the required high-voltage power supply systems are considered. Data and conceptual designs generated are found to indicate that grounding and bonding for high power systems can be accomplished in spacecraft by using either manual or automatic joining of the structural members.

Dunbar, W. G.↗

Cost and Performance of Distributed Photovoltaic Systems

Lifetime Cost and Performance (LCP) model assists in design of Photovoltaic (PV) systems. LCP simulation of performance, cost and revenue streams associated with distributed PV power systems. Provides user with substantial flexibility in specifying technical and economic environment of PV application.

Borden, C. S.↗

Solar Tests of Aperture Plate Materials for Solar Thermal Dish Collectors

If a malfunction occurs in a solar thermal point-focus distributed receiver power plant while a concentrator is pointed at the Sun, motion of the concentrator may stop. As the Sun moves relative to the Earth, the spot of concentrated sunlight then slowly walks off the receiver aperture, across the receiver face plate, and perhaps across adjacent portions of the concentrator. Intense local heating by the concentrated sunlight may damage or destroy these parts. The behavior of various materials under conditions simulating walk-off of a parabolic dish solar collector were evaluated. Each test consisted of exposure to concentrated sunlight at a peak flux density of about 7000 kW/square meter for 15 minutes. Types of materials tested included graphite, silicon carbide, silica, various silicates, alumina, zirconia, aluminum, copper, steel, and polytetrafluoroethylene. The only material that neither cracked nor melted was grade G-90 graphite. Grade CS graphite, a lower cost commercial grade, cracked half-way across, but did not fall apart. Both of these grades are medium-grain extruded graphites. A graphite cloth (graphitized polyacrylonitrile) showed fair performance when tested as a single thin ply; it might be useful as a multi-ply assembly. High purity slipcast silica showed some promise also.

Jaffe, L. D.↗

Design considerations for FET-gated power transistors

An FET-bipolar combinational power transistor configuration (tested up to 300 V, 20 A at 100 kHz) is described. The critical parameters for integrating the chips in hybrid form are examined, and an effort to optimize the overall characteristics of the configuration is discussed. Chip considerations are examined with respect to the voltage and current rating of individual chips, the FET surge capability, the choice of triple diffused transistor or epitaxial transistor for the bipolar element, the current tailing effect, and the implementation of the bipolar transistor and an FET as single chip or separate chips. Package considerations are discussed with respect to package material and geometry, surge current capability of bipolar base terminal bonding, and power losses distribution.

Chen, D. Y.↗

An integral solution procedure for radiative transfer in concentric cylindrical media

A complete integral formulation is developed for radiative transfer in emitting and absorbing media contained between infinitely long, concentric cylinders with black surfaces. The resulting flux equation is used to state both the gray and nongray radiative equilibrium problems that are solved numerically with controlled error. The results are compared with those from other approaches, both approximate and geometrically limiting, to check and put into perspective the present and prior work. The nongray solution is unique for concentric cylindrical media. The independent parameters of optical thickness and radius ratio are varied to study the emissive power (temperature) distribution, total heat flux, and the required computational time.

Pandey, D. K.↗

On the X-ray emission from Crab-like supernova remnants

Crab-like supernova remnants are modeled as expanding, homogeneous, pulsar-fed bubbles of magnetic field and relativistic particles. Power-law behavior is assumed, with time of bubble radius and magnetic field, and the evolution of the particle spectrum is calculated. It is shown that, if a single power-law distribution of particles is injected into the bubble, this simple model is substantially too bright in X-rays, compared with several observed remnants; a more complex model is evidently required. It is argued that the most likely possibility is that X-ray and radio-producing particles in fact have different origins altogether, and some of the constraints on processes producing X-ray-emitting particles are discussed.

Reynolds, S. P.↗

Instabilities in line-driven stellar winds. I - Dependence on perturbation wavelength

An analytical study is presented of the stability of absorption line-driven flows, such as found in stellar winds, in the presence of small-amplitude disturbances. A generalized calculation of the perturbed direct extinction force is performed and the evolution of the perturbation into the nonlinear regime and the dynamical results of perturbation in the scattered radiation field are examined. An expression is derived for the wavenumber variation of the perturbed line force from the milieu of nonoverlapping lines which have a power-law distribution in opacity. A linear dispersion analysis is carried out to model the growth and propagation of radiative-acoustic waves in absorption line-driven flows, which are found unstable to perturbations that may be smaller than the Sobolev length. No damping mechanism was found that would eliminate the absorption line-driven flows.

Owocki, S. P.↗

Solar tests of aperture plate materials for solar thermal dish collectors

If a malfunction occurs in a solar thermal point-focus distributed receiver power plant while a concentrator is pointed at the sun, motion of the concentrator may stop. As the sun moves relative to the earth, the spot of concentrated sunlight then slowly walks off the receiver aperture, across the receiver face plate, and perhaps across adjacent portions of the concentrator. Intense local heating by the concentrated sunlight may damage or destroy these parts. The behavior of various materials under conditions simulating walk-off of a parabolic dish solar collector were evaluated. Each test consisted of exposure to concentrated sunlight at a peak flux density of about 7000 kW/square meter for 15 minutes. Types of materials tested included graphite, silicon carbide, silica, various silicates, alumina, zirconia, aluminum, copper, steel, and polytetrafluroethylene. The only material that neither cracked nor melted was grade G-90 graphite. Grade CS graphite, a lower cost commercial grade, cracked half-way across, but did not fail apart. Both of these grades are medium-grain extruded graphites. A graphite cloth (graphitized polyacrylonitrile) showed fair performance when tested as a single thin ply; it might be useful as a multi-ply assembly. High purity slipcast silica showed some promise also.

Jaffe, L. D.↗

Solar tests of aperture plate materials for solar thermal dish collectors

If a malfunction occurs in a solar thermal point-focus distributed receiver power plant while a concentrator is pointed at the sun, motion of the concentrator may stop. As the sun moves relative to the earth, the spot of concentrated sunlight then slowly walks off the receiver aperture, across the receiver face plate, and perhaps across adjacent portions of the concentrator. Intense local heating by the concentrated sunlight may damage or destroy these parts. The behavior of various materials under conditions simulating walk-off of a parabolic dish solar collector were evaluated. Each test consisted of exposure to concentrated sunlight at a peak flux density of about 7000 kW/square meter for 15 minutes. Types of materials tested included graphite, silicon carbide, silica, various silicates, alumina, zirconia, aluminum, copper, steel, and polytetrafluoroethylene. The only material that neither cracked nor melted was grade G-90 graphite. Grade CS graphite, a lower cost commercial grade, cracked half-way across, but did not fall apart. Both of these grades are medium-grain extruded graphites. A graphite cloth (graphitized polyacrylonitrile) showed fair performance when tested as a single thin ply; it might be useful as a multi-ply assembly. High purity slipcast silica showed some promise also.

Jaffe, L. D.↗

Propagation of energetic electron streams in solar flares

The microscopic stability of an electron stream flowing down to the photosphere from the corona is examined. It is found that, while a power-law distribution is stable in the low-density corona, it is unstable against the generation of magnetized electron plasma waves in the high-density photosphere. The scattering of these energetic electrons may alter their radiation signatures.

Mok, Y.↗

The collisional dynamics of particulate disks

It is shown that the use of the Krook equation greatly simplifies the discussion of the collisional dynamics of particulate disks. Collisions are assumed to be inelastic from the outset. A simple heuristic argument is used to compute the effective collision rate in a disk of spherical particles with a power-law distribution of sizes. For Saturn's rings, the effective collision rate for momentum transport is substantially lower than that conventionally estimated on the basis of an observed optical depth at visual wavelengths. The closure of the vertically integrated set of moment equations without discarding the third-order moments at the outset is discussed, allowing for the possibility of a bent disk. In the limit that the collision frequency is much larger than the orbit frequency, the usual Navier-Stokes equations of viscous hydrodynamics for a thin disk are recovered with an explicit expression for the shear viscosity. The method is generalized to include the effects of gravitational scattering.

Shu, F. H.↗

Mode decoupling during retrorefraction as an explanation for bizarre radar echoes from icy moons

The two concepts of mode decoupling and retrorefraction are combined to explain the strength, distribution, and other features of the radar echoes from Europa, Ganymede, and Callisto. A decoupling of two characteristic modes of propagation appears to be a key to an understanding of the anomalous distribution of power among the polarized components of the echoes. Causes of the decoupling are proposed and their morphological implications are introduced.

Eshleman, V. R.↗