SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Quasi-steady aerodynamic and von Karman large deflection plate theory equations of nonlinear oscillations of fluttering plate for single mode subsonic and sonic or coupled mode supersonic oscillations
The present paper gives the results of measurements of the resistance of a plate placed parallel to the flow in the range of Reynolds numbers from 10 to 2300; in this range the resistance deviates from the formula of Blasius. The lower limit of validity of the Blasius formula is determined and also the increase in resistance at the edges parallel to the flow in the case of a plate of finite width.
A general derivation is given for the earth reflected solar radiation input to a flat plate--a solar cell paddle, for example--which is spinning about an axis coincident with the axis of symmetry of the satellite to which it is affixed. The resulting equations are written for the general case so that arbitrary orientations of the spin axis with respect to the earth-satellite line and arbitrary orientations of the normal to the plate with respect to the spin axis can be treated. No attempt is made to perform the resulting integrations because of the complexity of the equations; nor is there any attempt to delineate the integration limits for the general case. However, the equations governing these limits are given. The appendixes contain: the results, in graphical form, of two representative examples; the general computer program for the calculation is given in Fortran notation; and the results of a calculation of the distribution of albedo energy on the proposed Echo II satellite. The value of the mean solar constant used is 1.395 times 10 (sup 4) ergs per centimeters-squared per second; the mean albedo of the earth is assumed to be 0.34; and the earth is assumed to be a diffuse reflector.
Pile of plates polarizer from cleaved LiF plates for spectral region 2000 to 1200 angstroms
Two- and three-dimensional plates in high supersonic flow undergoing limit cycle oscillations analyzed, using aerodynamic theory and von Karman large deflection plate theory
Stress tensor analysis of elastic plates in reference state, noting nonlinear plate theory and variational principle
Results of a theoretical investigation of the compressive buckling of flat, rectangular, simply supported plates supported in the interior by equally spaced rows of rigid posts are presented. It is found that the plates buckle as if simply supported along all of the transverse lines or else all of the longitudinal lines passing through the rigid posts, the occurrence of the one buckling mode or the other depending on the number and spacing of the posts.
In connection with Pohlhausen's solution for the temperature field on the flat plate, a series of formulas were indicated by means of which the velocity and temperature field for variable physical characteristics can be computed by an integral equation and an iteration method based on it. With it, the following cases were solved: On the assumption that the viscosity simply varies with the temperature while the other fluid properties remain constant, the velocity and temperature field on the heated and cooled plate, respectively, was computed at the Prandtl numbers 12.5 and 100 (viscous fluids). A closer study of these two cases resulted in general relations: The calculations for a gas of Pr number 0.7 (air) were conducted on the assumption that all fluid properties vary with the temperature, and the velocities are low enough for the heat of friction to be discounted. The result was a thickening of the boundary layers, but no appreciable modification in shearing stress or heat-transfer coefficient.
The NEPTUNE project will establish a linked array of undersea observatories on the Juan de Fuca tectonic plate. This observatory will provide a new kind of research platform for real-time, long-term, plate-scale studies in the ocean and Earth sciences.
This paper presents a novel design of a deformed flat plate, wherein known amounts of distortion are introduced in a compensating flat plate, to recover the gain-loss due to the gravity-induced surface deformations of a large reflector antenna.
We present a statistical analysis of the accuracy of the digitized magnitudes of photometric plates on the timescale of decades. In our examination of archival Johnson B photometry from the Harvard DASCH archive, we find a median rt mean square scatter of light curves of the order of 0.15 magnitude over the range B approximately equal to 9-17 for all calibrations. Slight underlying systematics (trends or flux discontinuities) are on a level of less than or equal to 0.2 magnitudes per century (1889–1990) for the majority of constant stars. These historic data can be unambiguously used for processes that happen on scales of magnitudes, and need to be carefully examined in cases approaching the noise floor. The characterization of these limits in photometric stability may guide future studies in their use of plate archives. We explain these limitations for the example case of KIC 8462852, which has been claimed to dim by 0.16 magnitudes per century, and show that this trend cannot be considered as significant.
The objective of this investigation was to establish whether crystallographic texture played a role in variable ST ductility in 2219-T87 thick plate. The EBSD study involved data collection at NASA Glenn Research Center and ODF analysis of the imported data at NASA Langley Research Center. The most significant result was that through-thickness variations in microtextural characteristics were asymmetrical about the mid-plane of the plate. However, the overall texture intensity was low, such that cross-sectional variations were classified as a second order effect on ST ductility.
Electroplating lead on fluorocarbon polymer parts is accomplished by etching the parts to be plated with sodium, followed by successive depositions of silver and lead from ultrasonically agitated plating solutions. Metals other than lead may be electroplated on the silvered parts.
Fresnel zone plate with openings replacing the usual transparent rings produces images in a vacuum ultraviolet. The plate is made by etching and electrodeposition.
UV sensitization of photographic plates with sodium salicylate noting advantages over Schumann plates
Composite plate of fine steel wires imbedded in an aluminum alloy matrix results in a lightweight material with high tensile strength. Plates have been prepared having the strength of titanium with only 85 percent of its density.
Aluminum plate holds styrofoam securely in place for machining operations. The styrofoam is clamped to rubber or cork pads on the plate surface by vacuum. Foam rubber tape provides the vacuum seal.
Procedures for applying an adherent electroless nickel plating on 303 SE, 304, and 17-7 PH stainless steels, and 7075 aluminum alloy was developed. When heat treated, the electroless nickel plating provides a hard surface coating on a high strength, corrosion resistant substrate.