Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Photocurrent”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Controlling the Vapor Transport Crystal Growth of Hg 3 Se 2 I 2 Hard Radiation Detector Using Organic Polymer

The chalcohalide compound Hg 3 Se 2 I 2 with a defect anti-perovskite structure has been demonstrated to be a promising semiconductor for room temperature X- and gamma-ray detection. In this work, we use transport agents during the vapor growth of Hg 3 Se 2 I 2 crystals under gradient temperature profiles to dramatically improve the size and yield of Hg 3 Se 2 I 2 single crystals. Various growth conditions with combinations of organic polymer (polyethylene) with elemental Hg, Se, or 12 are compared. The largest single crystals (with size up to 7 x 5 x 3.5 mm 3 ) were obtained using both polyethylene and excess I-2 as the transport agents. The as-prepared detector devices based on these crystals have excellent photo response to a series of radiation sources, including low flux X-ray source, alpha particles, and gamma-rays. The X-ray induced photocurrent of Hg 3 Se 2 I 2 detectors is 3 orders of magnitude higher than the dark current, indicating excellent X-ray photosensitivity. Under Am-241 alpha particle source (5.5 MeV), the best energy resolution obtained is similar to 8.1%. The Hg 3 Se 2 I 2 device also shows improved detector performance under Co-57 and Cs-137 gamma-ray sources. The improved crystal growth and detector performance using this polymer additive during the vapor transport process further confirms the great potential for the development of Hg 3 Se 2 I 2 for radiation detection.

36 MATERIALS SCIENCE↗

Evaluation of Nanostructured β-Mn 2 V 2 O 7 Thin Films as Photoanodes for Photoelectrochemical Water Oxidation

β-Mn 2 V 2 O 7 (β-MVO) was recently reported to be a promising candidate for photoelectrochemical (PEC) water splitting, with a suitable band gap and band edge positions and reasonable stability and photoactivity in preliminary tests in alkaline solution. Here, we present an in-depth evaluation of the PEC performance and stability of phase-pure nanostructured β-Mn 2 V 2 O 7 films made by calcination of a spin-cast molecular ink. We show that β-Mn 2 V 2 O 7 dissolves in pure water, corrodes in aqueous electrolytes at pH 7 and 9, and converts to amorphous manganese (hydr)oxides within minutes at pH 13. Our β-Mn 2 V 2 O 7 films yielded only miniscule photocurrents (~uA cm -2 ) for the oxidation of iodide, sulfite, or water and the reduction of iodate or water in borate- and phosphate-buffered electrolytes at pH 7 and 9, the oxidation of [Fe(CN) 6 ] 4- or water at pH 13, and the oxidation of bromide in acetonitrile, regardless of film calcination temperature and time, film thickness, and illumination geometry. Minimal photoactivity was observed even in electrolytes in which film degradation was insignificant over the duration of the PEC tests. Ultrafast transient absorption spectroscopy shows that the poor photoactivity is likely the result of fast hole trapping and recombination at the MVO surface that leaves few free charge carriers beyond the picosecond time scale. Given its poor charge transport/extraction and chemical stability, native nanostructured β-Mn 2 V 2 O 7 is ineffective for solar water splitting and future research on this material should focus on the development of superior syntheses and film morphologies, MVO alloys, heterostructures, and surface coatings to alleviate recombination and boost operational stability. This work underscores the importance of careful follow-up studies of materials identified as "hits" in combinatorial materials discovery campaigns.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Semi Transparent Three-Dimensional Macroporous Quaternary Oxynitride Photoanodes for Photoelectrochemical Water Oxidation

Semi transparent three-dimensional macroporous (3DM) photoanodes based on quaternary oxynitrides have the potential to simultaneously realize superior light harvesting and efficient charge transfer in a tandem photoelectrochemical (PEC) cell. A 3DM CaTaO 2 N photoanode was prepared for the first time on a GaN/Al 2 O 3 substrate via a chemical route, and it exhibits a high transmittance of >60% in the wide solar spectrum and a photoresponse onset at −0.3 V versus the reversible hydrogen electrode (V RHE ) under simulated solar illumination. In particular, a plateau photocurrent density of 0.21 mA cm –2 was achieved at a low potential of 0.4 V RHE , which was 1.6-fold and more than 50-fold higher than a two-dimensional macroporous (2DM) CaTaO 2 N/GaN/Al 2 O 3 photoanode and a conventional particle-based CaTaO 2 N/GaN/Al 2 O 3 photoanode, respectively. The bicontinuous, interconnected pore structure within this 3DM film can improve charge carrier separation and collection by reducing the average diffusion distance for minority carriers toward the electrolyte. Optical measurements and simulations verified the enhanced sunlight harvesting in the 3DM photoanode, which was ascribed to the concentrated distribution of the electric field and multiple scattering. Furthermore, this study provides guidance for future synthesis of highly efficient semitransparent 3DM quaternary oxynitride-based photoanodes for a tandem PEC device.

Layers↗

First-Principles Design and Analysis of an Efficient, Pb-Free Ferroelectric Photovoltaic Absorber Derived from ZnSnO 3

Ferroelectric oxides, which exhibit a spontaneous and reversible electric polarization, have recently gained interest for photovoltaic applications, because this polarization can potentially facilitate exciton separation and carrier extraction while also generating open-circuit voltages orders-of-magnitude larger than the band gap. However, photovoltaic efficiencies in these materials are often limited by large band gaps and high hole effective masses. Developing a means to simultaneously reduce both without destroying the ferroelectric polarization could revolutionize photovoltaic technologies. In this work, we use first-principles computations to describe how chemical substitution of oxygen in the recently characterized ferroelectric ZnSnO 3 with sulfur to form ZnSnS 3 reduces the band gap to a near-optimal 1.3 eV while leaving the polarization virtually unchanged. Furthermore, we show that other key photovoltaic materials characteristics, such as hole effective mass, dielectric constant, and absorption coefficient, are also dramatically improved by sulfur substitution. Finally, we demonstrate that the well-known semiconductor GaN provides an excellent substrate on which to grow ZnSnS 3 , forming a strongly bound interface that is free of intrinsic midgap states and exhibits an ideal band alignment for efficient carrier extraction. Finally, this work advances the search for an Earth-abundant, nontoxic, ferroelectric material exhibiting strong solar absorption, and may enable the development of solar cells with both high photovoltage and photocurrent.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

V x In (2– x ) S 3 Intermediate Band Absorbers Deposited by Atomic Layer Deposition

Substitutional alloys of several thin film semiconductors have been proposed as intermediate band (IB) materials for use in next-generation photovoltaics, which aim to utilize a larger fraction of the solar spectrum without sacrificing significant photovoltage. Here, we demonstrate a novel approach to IB material growth, namely atomic layer deposition (ALD), to enable unique control over substitutional-dopant location and density. Two new ALD processes for vanadium sulfide incorporation are introduced, one of which incorporates a vanadium (III) amidinate previously untested for ALD. We synthesize the first thin film V x In (2-x) S 3 intermediate band semiconductors, using this process, and further demonstrate that the V:In ratio, and therefore intraband gap density of states, can be finely tuned according to the ALD dosing schedule. Deposition on a crystalline In 2 S 3 underlayer promotes the growth of a tetragonal β-In 2 S 3 -like phase V x In (2-x) S 3 , which exhibits a distinct sub-band gap absorption peak with onset near 1.1 eV in agreement with computational predictions. But, the V x In (2-x) S 3 films lack the lower energy transition predicted for a partially filled IB, and photoelectrochemical devices reveal a photocurrent response only from illumination with energy sufficient to span the parent band-gap.

36 MATERIALS SCIENCE↗

Multiple Fused Ring-Based Near-Infrared Nonfullerene Acceptors with an Interpenetrated Charge-Transfer Network

Two small molecule acceptors with chlorinated IC as end groups and 10-ring- and 12-ring-fused cores as central units, named R10-4Cl and R12-4Cl, were designed and synthesized, which exhibit low optical band gaps of 1.43 and 1.35 eV, respectively. X-ray crystallographic analysis of R10-4Cl shows that the end groups of adjacent molecules are parallel and partially overlap with a short π-π distance of 3.32 Å, which is helpful for electron transport in this direction. At the same time, there is another type of molecular orientation that lies in these two molecules with an angle about 64.7 degrees because of the close contact of S ∙∙∙ O with a distance of 3.15 Å. The two types of molecular arrangements result in an interpenetrated network structure in R10-4Cl films, which is helpful for the rapid charge transfer either along the horizontal direction or the sloping direction. After blending with a PBDB-T polymer donor, the R10-4Cl-based device shows wide photocurrent response from the visible to near-infrared regions, resulting in the better usage of the sunlight source. Benefited from this comprehensive solar energy absorption and the interpenetrated charge transfer, the R10-4Cl-based devices show a power conversion up to 10.7% with an improved J SC of 18.9 mA cm -2 .

14 SOLAR ENERGY↗

Electronic Structure and Performance Bottlenecks of CuFeO 2 Photocathodes

The path to realizing low-cost, stable, and earth-abundant photoelectrodes can be enabled through a detailed understanding of the optoelectronic properties of these materials by combining theory and experimental techniques. Of the limited set of oxide photocathode materials currently available, CuFeO 2 has emerged as a promising candidate warranting detailed attention. Here, highly compact thin films of rhombohedral (3R) CuFeO 2 were prepared via reactive co-sputtering. Despite its 1.43 eV indirect band gap, a cathodic photocurrent of 0.85 mA/cm 2 was obtained at 0.4 V versus reversible hydrogen electrode in the presence of a sacrificial electron acceptor. This unexpected performance was related to inefficient bulk charge separation because of the ultrafast (<1 ps) self-trapping of photogenerated free carriers. The electronic structure of 3R-CuFeO 2 was elucidated through a combination of optical and X-ray spectroscopic techniques and further complemented by first-principles computational methods including a many-body approach for computing the O K-edge X-ray absorption spectrum. Through resonant inelastic X-ray scattering spectroscopy, the visible absorption edges of CuFeO 2 were found to correspond to Cu → Fe metal-to-metal charge transfer, which exhibits a high propensity toward self-trapping. Findings of the present work enable us to understand the performance bottlenecks of CuFeO 2 photocathodes and suggest feasible strategies for improving material limitations.

36 MATERIALS SCIENCE↗

Multiple Charge Transfer States in Donor–Acceptor Heterojunctions with Large Frontier Orbital Energy Offsets

Here, we demonstrate several organic amorphous donor–acceptor systems that exhibit sub-bandgap features over a more than 2 eV spectral range. An in-depth study of one of these systems, NPB:HAT-CN (NPB is N,N'-di(1-naphthyl)-N,N'-diphenyl-(1,1'-biphenyl)-4,4'-diamine and HAT-CN is 1,4,5,8,9,11-hexaazatriphenylenehexacarbonitrile), reveals that the broad sub-bandgap features are attributed to multiple electronic charge transfer (CT) state transitions, broadened by energetic disorder sourcing from the fluctuations of intramolecular conformations and by the disordered intermolecular environment. These unique CT features originate from an unconventional donor and acceptor selection that reveals new insight about photocurrent generation and nonradiative recombination. Unlike materials employed in high performing organic solar cells, the materials studied here feature large optical energy gaps with very large frontier orbital energy level offsets, creating high bandgap devices with low open-circuit voltage. In addition to multiple electronic CT levels, we reveal that the internal quantum efficiency of these multiple CT transitions is not constant but photon energy dependent and with photoluminescence that originates primarily from the second lowest electronic CT state implying slow (relative to radiative and nonradiative rates) internal conversion within the CT manifold. In general, this class of donor–acceptor pairs provides an opportunity to probe CT states in unique ways to potentially unravel their role in carrier generation–recombination and energy loss mechanisms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Chloride Oxidation as an Alternative to the Oxygen-Evolution Reaction on H x WO 3 Photoelectrodes

Oxidizing chloride anion to chlorine or hypochlorous acid in water shows 100% current efficiency on H x WO 3 photoelectrodes. Water oxidation is less than 90% efficient in strong acid and gets worse as the solution becomes less acidic. Accordingly, oxidizing chloride leads to a stable photocurrent, indicating that the catalysis is sustainable for long periods without degrading the H x WO 3 material.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ultrafast Charge Transfer Dynamics at the Origin of Photoconductivity in Doped Organic Solids

In spite of their growing importance for optoelectronic devices, the fundamental properties and photophysics of molecularly doped organic solids remain poorly understood. Such doping typically leads to a small fraction of free conductive charges, with most electronic carriers remaining Coulombically bound to the ionized dopant. Recently, we have reported photocurrent for devices containing vacuum-deposited TAPC (1,1-bis(4-bis(4- methylphenyl)aminophenyl)cyclohexane) doped with MoO 3 , showing that photoexcitation of charged TAPC molecules increases the concentration of free holes that contribute to conduction. Here, we elucidate the excited-state dynamics of such doped TAPC films to unravel the key mechanisms responsible for this effect. We demonstrate that excitation of different electronic transitions in charged and neutral TAPC molecules allows bound holes to overcome the Coulombic attraction to their MoO 3 counterions, resulting in an enhanced yield of long-lived free carriers. This is caused by ultrafast back-and-forth shuffling of charges and excitation energy between adjacent cations and neutral molecules, competing with relatively slow nonradiative decay from higher excited states of TAPC •+ . The light-induced generation of conductive carriers requires the coexistence of cationic and neutral TAPC, a favorable energy level alignment, and intermolecular interactions in the solid state.

36 MATERIALS SCIENCE↗

Creating Functional Oxynitride–Silicon Interfaces and SrNbO 2 N Thin Films for Photoelectrochemical Applications

Photoelectrochemical performance dependence upon absorption length, carrier diffusion length, and surface area of an oxynitride photoabsorber is investigated. How best to fabricate optical-quality thin films of bandgap-tunable oxynitrides is also discussed. We targeted the stoichiometric compound SrNbO 2 N as an optimal wide-bandgap photoabsorber (1.9 eV) for use with silicon (1.1 eV) in a tandem structure photoelectrochemical cell. Preparation of perovskite oxynitrides at high-temperature as isolated powders is often straightforward, but it is difficult to integrate them as thin films in tandem junction devices with low-temperature materials. Here we develop the first method to prepare optical-quality SrNbO 2 N thin-films of tunable thickness and roughness on single-crystal silicon substrate. This achievement required an interfacial layer of ultra-thin TaN to be used as a barrier to reduce the inter-diffusion of silicon and oxygen during oxynitride syn-thesis. We produced a variety of SrNbO 2 N film thicknesses (20-440 nm) on n + -Si(100) surfaces. Roughness factor (0.14-21) scaled with thickness. The intrinsic photoelectrochemical activity of these devices was evaluated using a low-barrier sacrificial electron donor. Photocurrent density and photovoltage revealed a significant (and non-linear) dependence on film thickness and roughness. Furthermore, absorption length, carrier diffusion length, and surface area were each found to play key roles. Balancing these is required for optimally performing devices.

08 HYDROGEN↗

Effects of Residual DMSO Adduct on Photonically Cured MAPbI 3 Solar Cells

Defects and impurities in halide perovskite solar cells can negatively impact device performance and long-term stability. In this study, we identify photonically cured methylammonium (MA) lead iodide films contain a residual adduct, MA 2 Pb 3 I 8 (dimethyl sulfoxide) 2 (MA 2 Pb 3 I 8 (DMSO) 2 ), that reduces photocurrent generation in perovskite solar cells (PSCs). This is evidenced by a decrease in the external quantum efficiency (EQE) near 400 nm. Similar EQE reductions were observed in PSCs produced using high-speed processes but have not been thoroughly examined. Through X-ray diffraction patterns and Fourier transform infrared spectroscopy, we establish the photo-inactive MA 2 Pb 3 I 8 (DMSO) 2 as the culprit for the EQE reduction. Combined experimental and simulation results reveal that the MA 2 Pb 3 I 8 (DMSO) 2 phase is located at the hole transport layer/ interface, not on the surface, resulting in lower quantum efficiency and surface photovoltage in the short wavelength region. The residual adduct is kinetically trapped due to the short processing time (20 ms) and crystallization direction but can be removed by an additional photonic pulse. Furthermore, this study highlights the need for careful examination of resulting materials beyond device efficiency when transitioning from laboratory processing to industrial high-speed methods.

14 SOLAR ENERGY↗

Entropy-Driven Charge Separation: A Potential Explanation for the Low Energy Loss Found in OPVs with Non-fullerene Acceptors

The recent development of non-fullerene acceptors (NFA) has led to an abrupt increase in the organic photovoltaic (OPV) efficiency from ~12% to ~20%. NFA OPVs can generate photocurrent efficiently without much energy loss, which contrasts with the large energy loss often needed for generating free charges from excitons in fullerene OPVs. Here, we argue that entropy-driven charge separation, which allows excitons to spontaneously gain heat from the environment, is responsible for the exceptionally low energy loss found in NFA OPVs. The entropic driving force is maximized when the delocalized electron and hole wave functions in the CT exciton intersect each other via pointlike junctions. Furthermore, these pointlike junctions are abundant in the polymer/NFA bulk heterojunction which consists of intertwined, stringlike donor and acceptor domains in which electron delocalizes anisotropically. Such microstructure favors entropy-driven charge separation, which can enable charge separation with a minimal energy loss.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Oxidation Temperature-Dependent Electrochemical Doping of WO 3 Deposited via Atomic Layer Deposition

Silicon-based photoelectrochemical devices show promise for the performance of light-driven CO 2 reduction but suffer from instability under photoelectrochemical conditions relevant to CO 2 reduction. Coating silicon electrodes with thin layers of metal oxides has shown promise to passivate unstable silicon surfaces, and many different metal oxides can be deposited on silicon using various techniques. In this study, we investigate the fundamental photoelectrochemical performance of WO 3 -coated silicon photoelectrodes, which were generated by oxidation of W-metal films deposited via atomic layer deposition on both degenerately doped (nSi + ) and low-doped (pSi) silicon. Two different oxidation temperatures were investigated (400 and 600 °C), and it was found that the monoclinic phase of WO 3 predominates at both temperatures but that more grain boundaries are present in the 600 °C film. From X-ray photoelectron spectroscopy, the stoichiometry of both films was found to be 1:3 W:O, and low electron energy loss experiments indicate band gaps of 3.0 and 3.1 eV for 400 and 600 °C films, respectively. Cyclic voltammetry experiments showed that the electron transfer kinetics increased after continued redox cycling, particularly for the material produced at 400 °C. X-ray photoelectron spectra suggest that the observed increase in electrode conductivity is due to the formation of oxygen vacancies in the film. Electrochemical impedance spectroscopy indicated that charge transport through the films was impacted by the grain boundaries that formed during oxidation of the film. Photoelectrochemical studies on pSi/WO 3 electrodes were highly variable, only producing a photocurrent and photovoltage with some samples. Our best sample, formed at 400 °C, produced a photovoltage of 180 mV, which is lower than what has previously been reported for WO 3 -coated silicon (500 mV). We hypothesize that the variability in photoelectrochemical experiments arose from a roughened WSiO x interface that is generated during film preparation. WO 3 shows promise as a metal oxide coating for silicon, but our results suggest that formation of a high-quality interface between Si and WO 3 is vital for best performance.

Charge transfer↗

Interfacial Properties of Gold and Cobalt Oxyhydroxide in Plasmon-Mediated Oxygen Evolution Reaction

Water electrolysis is one green approach of storing electrical energy within chemical bonds of the high-energy hydrogen gas (H2). The anodic reaction involved in the oxygen evolution reaction (OER) requires high kinetic overpotential on the overall rate of the process. Recently, plasmonic gold nanoparticles (Au NPs) have been added to enhance the charge transfer at the interface of the OER electrocatalysts and electrolyte under light illumination. However, mechanistic understanding of how Au NPs on the photo-assisted electrochemical process is still lacking. We applied a model system of plasmonic Au electrode and a cobalt (Co)-based OER electrocatalyst in alkaline electrolytes to investigate the plasmon-mediated OER process with (photo)electrochemical and spectroscopic studies. Our results demonstrated that the electrodeposited and surfactant-free plasmonic Au electrode could enhance the electrocatalytic performances of the Co-based electrocatalysts in the OER process with continuous visible and near infrared light illumination. Both the photothermal and energetic charge carriers were found to contribute to the enhanced OER performance based on the transient photocurrent studies, and the interfaces of Au and the Co-based electrocatalysts determined the enhancement mechanisms. The active phase of the cobalt based OER electrocatalyst at operating potentials was identified with electrochemical Raman measurements.

OER↗

Dynamic Coupling between Electrode Interface and Donor/Acceptor Interface via Charge Dissociation in Organic Solar Cells at Device-Operating Condition

Organic solar cells exhibit both electrode/photovoltaic (E/P) interface and donor/acceptor (D/A) interface in controlling the critical photovoltaic processes. Here, on the basis of the efficient PTB7:PC71BM solar cells, our studies on magneto-photocurrent with external bias provide the first evidence that the E/P interface and D/A interface are dynamically coupled at device-operating condition. Specifically, we observe a significant decrease (90%) in the critical bias required to completely dissociate the charge transfer (CT) states at D/A interface by changing the E/P interface with increased interface dipole field from ZnO to the polyelectrolyte (PFN). The experimental results demonstrate that strong dipole field at the E/P interface can effectively decrease the electron hole binding energy at D/A interface through the enhancement of built-in field applied on CT states. Clearly, our experimental studies provide new insight on the interfacial engineering through addressing the dynamic coupling between E/P interface and D/A interface in organic bulkheterojunction solar cells toward further improvement on photovoltaic efficiencies.

14 SOLAR ENERGY↗

Photoinjection of High Potential Holes into Cu 5 Ta 11 O 30 Nanoparticles by Porphyrin Dyes

Excited-state hole injection into the valence band of Cu 5 Ta 11 O 30 nanoparticles (NP-Cu 5 Ta 11 O 30 ) was explored through sensitization with zinc porphyrin dyes using simulated solar irradiance. The Cu5Ta11O30 nanoparticles were prepared by a flux-mediated synthesis and found to have an average particle size of ~10–15 nm by DLS and TEM. The zinc 4-(10,15,20-tris(4-pyridinyl)-porphin-5-yl)phenylphosphonic acid (D1) and its analogue, in which the pyridine groups are methylated (D2), were synthesized and found to have excited-state reduction potentials appropriate for p-type dye sensitization of the nanoparticles. The dye-sensitized NP-Cu 5 Ta 11 O 30 exhibited fluorescence quenching consistent with electron transfer from the NP-Cu 5 Ta 11 O 30 to the dye; forward and recombination rates were obtained by transient absorption measurements. Hole injection times of 8 ps and <100 fs were observed for D1 and D2, respectively. Nanoparticulate films of Cu 5 Ta 11 O 30 were prepared and evaluated in dye-sensitized solar cells under simulated solar irradiance (AM 1.5 G, 100 mW/cm 2 ). Furthermore, measurable photocurrents and open-circuit potentials (V oc ) of 200 and 110 mV were observed using D1 and D2, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗