SEARCH · Engineering Papers
Results for “Parallel processing”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Non-Protein Amino Acids Identified in Carbon-Rich Hayabusa Particles
Amino acid abundances in acid-hydrolyzed hot water extracts of gold foils containing five Category 3 (carbon-rich) Hayabusa particles were studied using liquid chromatography with tandem fluorescence and accurate mass detection. Initial particle analyses using field emission scanning electron microscopy with energy-dispersive X-ray spectrometry indicated that the particles were composed mainly of carbon. Prior to amino acid analysis, infrared and Raman microspectroscopy showed some grains possessed primitive organic carbon. Although trace terrestrial contamination, namely L-protein amino acids, was observed in all Hayabusa extracts, several terrestrially uncommon non-protein amino acids were also identified. Some Hayabusa particles contained racemic (D≈L) mixtures of the non-protein amino acids β-aminoisobutyric acid (β-AIB) and β-amino-n-butyric acid (β-ABA) at low abundances ranging from 0.09 to 0.31 nmol g −1 . Larger abundances of the non-protein amino acid β-alanine (9.2 nmol g −1 , ≈4.5 times greater than background levels) were measured in an extract of three Hayabusa particles. This β-alanine abundance was ≈6 times higher than that measured in an extract of a CM2 Murchison grain processed in parallel. The comparatively high β-alanine abundance is surprising as asteroid Itokawa is similar to amino acid-poor LL ordinary chondrites. Elevated β-alanine abundances and racemic β-AIB and β-ABA in Hayabusa grains suggested these compounds have non-biological and plausibly non-terrestrial origins. These results are the first evidence of plausibly extraterrestrial amino acids in asteroid material from a sample-return mission and demonstrate the capabilities of the analytical protocols used to study asteroid Ryugu and Bennu samples returned by the JAXA Hayabusa2 and NASA OSIRIS-REx missions, respectively.
Rapid Spacecraft Payload Development: In-Orbit Demonstration of Flight Software Reuse, Scalability, and Dependability
As space mission design trends towards shared, multi-mission platforms and high-performance onboard computing architectures, the number of spacecraft launched into operation is also steadily rising. Through ridesharing, spacecraft miniaturization, and other cost-reduction measures, the barriers to space are lowering, resulting in compounded growth in the amount of flight software being deployed. To meet the needs of both the growing quantity and evolving nature of spacecraft, flight software design must accordingly adapt to support more efficient development, solutions to computational resource-sharing, and software reusability. This paper focuses on a software payload demonstrating several core technologies that improve the state-of-the-art in these identified areas. Launched into low-earth orbit in January 2022, our software payload was conceived, designed, and delivered in a span of merely two months. It was developed on top of the NASA core Flight System (cFS) framework and the Distributed Spacecraft Autonomy (DSA) Comm cFS application, which translates cFS software bus messages across a Data Distribution Service (DDS) network. The flight software, packaged in Linux container images, was deployed as one of 18 flight applications managed through the Unibap SpaceCloud Framework. The applications were run on a Unibap iX5-102 radiation-tolerant payload computer, hosted on the D-Orbit SCV-004 spacecraft as part of an ESA-sponsored in-orbit technology test. Our payload, referred to as the DSA D-Orbit software, demonstrates the reusability of the DSA Comm app in a substantially different context and purpose as its original mission. Comm’s original design goal was to reliably distribute messages between spacecraft swarms of arbitrary size and dynamic network topology. However, we leverage this same functionality to introduce redundancy and opportunistic parallel data processing in the context of a representative onboard image processing workload. This adaptive mission architecture was enabled in part by the SpaceCloud Framework’s use of container virtualization as the payload integration interface. By using a base container image with common high-level language runtimes and libraries, we were able to rapidly design, develop, and validate our image processing application without many of the technological barriers common to flight software development. We present details the goals, approach, results, and lessons learned through this technology demonstration experiment and contextualize those observations against present and future challenges in spacecraft software development.
Solving inverse problems for process-structure linkages using asynchronous parallel Bayesian optimization.
Abstract not provided.
Performance enhancement of planar MOC calculation in hexagonal geometries by assembly-wise domain decomposition
The parallelization of planar Method of Characteristics (MOC) calculation with the higher order scattering in the hexagonal version of the nTRACER direct whole core calculation code is enhanced by adopting assembly-wise domain decomposition and other techniques. In order to augment the hexagonal domain decomposition, the three-color scheme, the angular decomposition, and the angular flux storage scheme are examined. The parallel performance assessed for the VVER benchmark problems demonstrates that the hexagonal assembly-wise domain decomposition significantly reduces the computing time in ray tracing by up to 64 %. (authors)
Parallel transport sweeps on two-dimensional cartesian and hexagonal grids
This paper aims to provide a proof of concept for parallel transport sweeps on two-dimensional hexagonal grids for the discrete ordinates transport equation. While the method is an extension of the popular and well-established Koch-Baker-Alcoulffe (KBA) algorithm, there are significant differences between the cartesian and hexagonal grid and thereafter sweep. The most important is the three-way connectivity of hexagons within the grid which creates greater dependencies between the elements. The KBA method in structured orthogonal grids was first implemented in the DRAGON5 code and the method is first described here. The differences in implementation for the hexagonal grid are also described. Benchmark results are also presented, showing roughly 10 times speedup in computational times with roughly 100 processors, in both cases. (authors)
Extension of the high-resolution thermal-hydraulics code ESCOT to hexagonal core geometries for multi-physics calculations
The extension of the capabilities of the pin-level nuclear reactor core thermal-hydraulics (T/H) code ESCOT to analyze hexagonal fueled cores and its performance are presented. ESCOT is an accurate yet fast core thermal-hydraulics solution aiming at high-fidelity and high-resolution multi-physics core analysis in the framework of massively parallel computing platforms. Its algorithm solution is based on the four-equation drift-flux model for two-phase calculations, these are numerically solved by applying the Finite Volume Method (FVM) and the Semi-Implicit Method for Pressure-Linked Equation (SIMPLE)-like algorithm in a staggered grid system. Constitutive models such as turbulent mixing, pressure drop, and vapor generation are employed to simulate key phenomena in subchannel-scale analysis. ESCOT is parallelized by a double (radial and axial) domain decomposition that enables its highly parallelized execution. The coupling of the code with the neutronics whole core solver for hexagonal geometries nTRACER is described. The newly implemented ESCOT features are validated by comparing single assembly and full core steady state nTRACER-ESCOT solutions with nTRACER standalone internal one-dimensional T/H solver results. The validation problems are based on the VVER 440 and VVER 1000 cores. ESCOT results show differences within an acceptable range with respect to the simple 1D nTRACER built-in solver. (authors)
Ease of use and deployment for a fast, scalable data movement infrastructure
Explore the source record for details and available documents.
Parallel asynchronous hardware implementation of image processing algorithms
Research is being carried out on hardware for a new approach to focal plane processing. The hardware involves silicon injection mode devices. These devices provide a natural basis for parallel asynchronous focal plane image preprocessing. The simplicity and novel properties of the devices would permit an independent analog processing channel to be dedicated to every pixel. A laminar architecture built from arrays of the devices would form a two-dimensional (2-D) array processor with a 2-D array of inputs located directly behind a focal plane detector array. A 2-D image data stream would propagate in neuron-like asynchronous pulse-coded form through the laminar processor. No multiplexing, digitization, or serial processing would occur in the preprocessing state. High performance is expected, based on pulse coding of input currents down to one picoampere with noise referred to input of about 10 femtoamperes. Linear pulse coding has been observed for input currents ranging up to seven orders of magnitude. Low power requirements suggest utility in space and in conjunction with very large arrays. Very low dark current and multispectral capability are possible because of hardware compatibility with the cryogenic environment of high performance detector arrays. The aforementioned hardware development effort is aimed at systems which would integrate image acquisition and image processing.
Space vehicle-borne application of optical data processing
A model is considered for vehicle-borne parallel optical data processing which might be used as a key part of an advanced earth resources satellite mission. Some typical applications and the operation of the on-board processor are discussed.
NETRA: A parallel architecture for integrated vision systems. 1: Architecture and organization
Computer vision is regarded as one of the most complex and computationally intensive problems. An integrated vision system (IVS) is considered to be a system that uses vision algorithms from all levels of processing for a high level application (such as object recognition). A model of computation is presented for parallel processing for an IVS. Using the model, desired features and capabilities of a parallel architecture suitable for IVSs are derived. Then a multiprocessor architecture (called NETRA) is presented. This architecture is highly flexible without the use of complex interconnection schemes. The topology of NETRA is recursively defined and hence is easily scalable from small to large systems. Homogeneity of NETRA permits fault tolerance and graceful degradation under faults. It is a recursively defined tree-type hierarchical architecture where each of the leaf nodes consists of a cluster of processors connected with a programmable crossbar with selective broadcast capability to provide for desired flexibility. A qualitative evaluation of NETRA is presented. Then general schemes are described to map parallel algorithms onto NETRA. Algorithms are classified according to their communication requirements for parallel processing. An extensive analysis of inter-cluster communication strategies in NETRA is presented, and parameters affecting performance of parallel algorithms when mapped on NETRA are discussed. Finally, a methodology to evaluate performance of algorithms on NETRA is described.
File concepts for parallel I/O
The subject of input/output (I/O) was often neglected in the design of parallel computer systems, although for many problems I/O rates will limit the speedup attainable. The I/O problem is addressed by considering the role of files in parallel systems. The notion of parallel files is introduced. Parallel files provide for concurrent access by multiple processes, and utilize parallelism in the I/O system to improve performance. Parallel files can also be used conventionally by sequential programs. A set of standard parallel file organizations is proposed, organizations are suggested, using multiple storage devices. Problem areas are also identified and discussed.
File concepts for parallel I/O
The subject of input/output (I/O) was often been neglected in the design of parallel computer systems, although for many problems I/O rates will limit the speedup attainable. The I/O problem is addressed by considering the role of files in parallel systems. The notion of parallel files is introduced. Parallel files provide for concurrent access by multiple processes, and utilize parallelism in the I/O system to improve performance. Parallel files can also be used conventionally by sequential programs. A set of standard parallel file organizations is proposed, based on common data partitioning techniques. Implementation strategies for the proposed organizations are suggested, using multiple storage devices. Problem areas are also identified and discussed.
Thin film thermocouples for high temperature measurement on ceramic materials
Thin film thermocouples have been developed for use on metal parts in jet engines to 1000 C. However, advanced propulsion systems are being developed that will use ceramic materials and reach higher temperatures. The purpose of this work is to develop thin film thermocouples for use on ceramic materials. The thin film thermocouples are Pt13Rh/Pt fabricated by the sputtering process. Lead wires are attached using the parallel-gap welding process. The ceramic materials are silicon nitride, silicon carbide, aluminum oxide, and mullite. Both steady state and thermal cycling furnace tests were performed in the temperature range to 1500 C. High-heating-rate tests were performed in an arc lamp heat-flux-calibration facility. The fabrication of the thin film thermocouples is described. The thin film thermocouple output was compared to a reference wire thermocouple. Drift of the thin film thermocouples was determined, and causes of drift are discussed. The results of high-heating-rate tests up to 2500 C/sec are presented. The stability of the ceramic materials is examined. It is concluded that Pt13Rh/Pt thin film thermocouples are capable of meeting lifetime goals of 50 hours or more up to temperatures of 1500 C depending on the stability of the particular ceramic substrate.
Development of thin film thermocouples on ceramic materials for advanced propulsion system applications
Thin film thermocouples were developed for use on metal parts in jet engines to 1000 C. However, advanced propulsion systems are being developed that will use ceramic materials and reach higher temperatures. The purpose is to develop thin film thermocouples for use on ceramic materials. The new thin film thermocouples are Pt13Rh/Pt fabricated by the sputtering process. Lead wires are attached using the parallel-gap welding process. The ceramic materials tested are silicon nitride, silicon carbide, aluminum oxide, and mullite. Both steady state and thermal cycling furnace tests were performed in the temperature range to 1500 C. High-heating-rate tests were performed in an arc lamp heat-flux-calibration facility. The fabrication of the thin film thermocouples is described. The thin film thermocouple output was compared to a reference wire thermocouple. Drift of the thin film thermocouples was determined, and causes of drift are discussed. The results of high heating rate tests up to 2500 C/sec are presented. The stability of the ceramic materials is examined. It is concluded that Pt13Rh/Pt thin film thermocouples are capable of meeting lifetime goals of 50 hr or more up to temperatures of 1500 C depending on the stability of the particular ceramic substrate.
Development of Thin Film Thermocouples on Ceramic Materials for Advanced Propulsion System Applications
Thin film thermocouples have been developed for use on metal parts in jet engines to 1000 c. However, advanced propulsion systems are being developed that will use ceramic materials and reach higher temperatures. The purpose of this work is to develop thin film thermocouples for use on ceramic materials. The new thin film thermocouples are Pt13Rh/Pt fabricated by the sputtering process. Lead wires are attached using the parallel-gap welding process. The ceramic materials tested are silicon nitride, silicon carbide, aluminum oxide, and mullite. Both steady state and thermal cycling furnace tests were performed in the temperature range to 1500 C. High-heating-rate tests were performed in an arc lamp heat-flux-calibration facility. The fabrication of the thin film thermocouples is described. The thin film thermocouple output was compared to a reference wire thermocouple. Drift of the thin film thermocouples was determined, and causes of drift are discussed. The results of high heating rate tests up to 2500 C/sec are presented. The stability of the ceramic materials is examined. It is concluded that Pt13Rh/Pt thin film thermocouples are capable of meeting lifetime goals of 50 hours or more up to temperature of 1500 C depending on the stability of the particular ceramic substrate.
Electronic Packaging Techniques
A characteristic of aerospace system design is that equipment size and weight must always be kept to a minimum, even in small components such as electronic packages. The dictates of spacecraft design have spawned a number of high-density packaging techniques, among them methods of connecting circuits in printed wiring boards by processes called stitchbond welding and parallel gap welding. These processes help designers compress more components into less space; they also afford weight savings and lower production costs.
Enhanced Sustainability in Treatment of Contaminated Metals for Clearance and Recycling - 20290
Cyclife Sweden AB has, for more than 30 years, provided metal treatment services to the domestic and international nuclear industry with the aim of creating value through metal clearance and recycling. These operations are to a large extent based on the concept that the materials, after pre-treatment, including decontamination, will be melted for clearance. During the melting process, some nuclides separate from the metal while the remaining radioactivity becomes fully homogenized in the metal bath and the resulting ingots, along with the samples taken before casting At a time when activities to fight Climate Challenge are in focus, any savings in energy consumption, in addition to the positive environmental effect of recycling metals back to industry, is more than welcome. If the clearance of certain metallic items can be achieved safely, without using melting, it is the environmentally preferred option provided it carries a reasonable cost. It is even better if an object can go through a decontamination and clearance process prior to re-use inside or outside the nuclear sector. Cyclife Sweden is currently investing in a direct clearance process, to be operated in parallel with the melting process. This new process is expected to be fully operational in the late summer of 2020 and includes pre-treatment, decontamination and heavily shielded clearance measurement installations. The treatment will also allow clearance measurements of larger objects without the need for segmentation, along with allowing objects composed of different materials, like electric motors can be accepted for treatment. This paper gives an overview of the circular economy aspects in a nuclear back-end context, the Cyclife approach to further implement a circular economy approach in the processes, Material Acceptance Criteria for treatment, the facility set-up for the new process and how the melting route and the direct route can be combined in an efficient industrial scale process. To put the new capabilities into perspective, the two different treatment and clearance approaches, i.e. direct clearance and melting, are to be compared. (authors)