Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PUSH”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Solid and gas thermal conductivity models improvement and validation in various porous insulation materials

In the past few decades, significant efforts have been made to improve the theoretical understanding of thermal transport mechanisms in thermal insulation materials and push the thermal conductivity's lower limits. However, most works focused singularly on specific types of materials, and the models used for thermal conductivity predictions are diverse - a model that fits one material might not fit others. Here, we improve and unify the gas and solid thermal conductivity models for porous materials. Through experimental characterization of several different materials as well as literature data for other materials, these models are validated. Further, we have also found that the pressure-dependent gas thermal conductivity of most materials can be well fitted by using one or two pore sizes without using a complex pore size distribution. With the refined models, we decompose the effective thermal conductivity of several thermal insulation materials into gas, solid, and radiation contributions. For cellular (polystyrene and polyurethane) foams, the relative contributions from air, solid, and radiation are 58–75%, 3–11%, 16–38%, respectively. For granular porous materials (polyurethane and silica in this work), the contributions from air, solid, and radiation are 45–66%, 34–46%, and 0–8%, respectively. This work is expected to provide guidance on the design and optimization of the next generation of thermal insulation materials, for example, through the effort of reducing gas conduction and radiation in foams and suppressing gas and solid conduction in aerogels.

36 MATERIALS SCIENCE↗

Organic superbases in Lewis pair catalyzed hydrogenations of imines

Organic superbases have recently emerged as powerful components in metal-free catalytic systems, yet their role in frustrated Lewis pair (FLP) catalyzed hydrogenation reactions remain underexplored. In this article, we investigate the diphosphazene superbases P 2 - t Bu (1) and P 2 -Et (2) as base components combined with electronically tunable boranes of formula 9-(X n -C 6 H 5-n )BBN, where X n = 4-NMe₂, 4-OMe, 4-Me, 4-H, 4-F, 4-OCF 3 , 4-CF 3 , 3,5-(CF3), in FLP-catalyzed hydrogenations of imines. While the more sterically encumbered base 1 forms persistent FLPs whose activity correlates with the hydride affinity of the borane, less hindered base 2 generates Lewis acid–base adducts and displays superior catalytic performance, especially with boranes of lower hydride affinity. A systematic screening identified the adduct 2/9-(4-MeO-C 6 H 4 )BBN as the most active catalytic system, achieving quantitative hydrogenation of N-benzylidene aniline at 80 °C and H 2 pressures as low as 40 bar in THF. Multinuclear NMR spectroscopic studies and DFT calculations support a mechanistic scenario in which reversible adduct formation and subsequent dissociation to the free acid–base pair precede heterolytic H₂ cleavage, with adduct stability and borane electrophilicity concurrently dictating catalytic activity. Under optimized conditions, the most active catalyst system, 2/9-(4-MeO-C 6 H 4 )BBN, hydrogenates a broad range of aldimines, including electron-rich 4-NMe₂ and push-pull substrates, mono- and bis-ortho-substituted imines, and selected heteroaryl imines, with excellent yields and selectivity. Collectively, these findings establish design principles for tuning BBN-derived FLP systems and expand the scope of metal-free hydrogenation catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Oxygen enrichment combustion to reduce fossil energy consumption and emissions in hot rolling steel production

The reheating furnace operation in the hot mill is natural gas- and electricity-intensive. Oxygen enrichment combustion for reheating furnaces has been proposed to curb and replace natural gas use. In this study, heat transfer in steel slabs in the combustion environment of a push-type reheating furnace was simulated using a computational fluid dynamics (CFD) model. Two oxygen enrichment methods that optimized for performance were selected— a medium oxygen enrichment (MOE) case and an oxy-fuel (OF) case. A life cycle analysis (LCA) characterized the energy and emission profiles of an integrated iron and steel manufacturing process using the two oxygen enrichment cases for the hot mill. These conditions were evaluated for energy use and carbon intensity and compared with a baseline case. Results show that with oxygen enrichment, natural gas consumption can decrease by 19.6%–26.8%, total energy consumption (natural gas and electricity) can decrease by 15.1%–20.7% in the hot mill. Emissions of greenhouse gases can decrease by 11.1%–15.2% in the two optimized cases with 14%–27% reductions in regulated criteria pollutants (nitrogen oxides, carbon monoxide, particulate matter, volatile organic compounds, black carbon, organic carbon, and volatile organic carbons). There is a tradeoff between reducing natural gas consumption and increasing electricity demand from a life cycle perspective. Although the OF case resulted in higher energy- and emissions-related benefits, the MOE case showed the more desirable heat flux uniformity, which is key to maintaining product quality. The analysis suggests that oxygen enrichment in the reheating furnace process can have a significant impact on hot mill environmental performance and become a contributing factor in transitioning to low-carbon steel manufacturing.

36 MATERIALS SCIENCE↗

Life cycle assessment of coir fiber-reinforced composites for automotive applications

Past decades have seen an increasing prevalence of natural fiber-reinforced composites (NFRCs) due to growing conscientiousness around sustainability and a push towards vehicle lightweighting. The environmentally friendly and sustainable claims of NFRCs need to be validated due to their large variability and variety, particularly where material substitutions are concerned, such as in substituting glass fiber with natural fiber. Additionally, the objective of this work is to determine the cumulative energy demand (CED) and greenhouse gas emissions (GHG) associated with an automotive part (of volume 0.001 m3) made from 40 wt% coir fiber-reinforced polypropylene (PP) and compared with a similar part made from 40 wt% glass fiber reinforced PP. SimaPro v. 9.0.0.49 was used for the analysis, whereas inventory data were collected from databases, such as Ecoinvent 3, Transportation Energy Databook, Greet model 2022, and published papers. The results showed that CED and GHG associated with the coir fiber-reinforced composite part were lower than the glass fiber-reinforced composite part for both cradle-to-gate (~34–40%) and cradle-to-grave (excluding end-of-life) (~24%) analysis.

36 MATERIALS SCIENCE↗

An implicit, conservative and asymptotic-preserving electrostatic particle-in-cell algorithm for arbitrarily magnetized plasmas in uniform magnetic fields

Here, we introduce a new electrostatic particle-in-cell algorithm capable of using large timesteps compared to particle gyro-period under a uniform external magnetic field. The algorithm extends earlier electrostatic fully implicit PIC implementations with a new asymptotic-preserving particle-push scheme that allows timesteps much larger than particle gyroperiods. In the large-timestep limit, the integrator preserves all particle drifts, while recovering the full orbit for small timesteps. The scheme allows for a seamless, efficient treatment of particles with coexisting magnetized and unmagnetized species, and conserves energy and charge exactly without spoiling implicit solver performance. We demonstrate by numerical experiment with several problems of variable species magnetization (diocotron instability, modified two-stream instability, and drift instability) that orders of magnitude wall-clock-time speedups vs. the standard fully implicit electrostatic PIC algorithm are possible without sacrificing solution accuracy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The effects of different types of additives on growth of biomineral phases investigated by in situ atomic force microscopy

In this study, interactions between different types of additives with specific crystal surfaces of mineral phases found in biominerals were investigated at nanometer and micrometer scales by in situ atomic force microscopy (AFM). Firstly, the inhibitory effect of magnesium ion (Mg 2+ ) and that of a peptide molecule, L-aspartic acid 6mer (L-Asp 6 ) on the growth of a fast growing [-10-1] step on the (-101) face of calcium oxalate monohydrate (COM) crystal are quantitatively compared by the step speed data. Differences in the inhibitory effect are explained based on a De Yoreo model of step kinetics in detail. The step speed data show that Mg 2+ had a little inhibitory effect on the growth of the [-10-1] step, approaching a limiting value of about 15% reduction in the step speed, whereas L-Asp 6 was substantially more effective in inhibiting the step growth with an ability to stop the growth completely. Secondly, the effects of a protein molecule, bovine serum albumin (BSA) and a pseudo protein-like organic particle PSPMA 30 -PDPA 47 micelle on the growth of calcite on its {104} faces are compared. Both BSA and PSPMA 30 -PDPA 47 micelle temporarily pinned the passing steps without or negligibly inhibiting the step growth overall. The BSA molecule remained at the crystal surface without incorporation into the crystal because the steps passed through it, pushing it up and out. However, in contrast to the BSA, the micelle was incorporated into the crystal by the passing steps. In conclusion, these results together with other relevant studies suggest that the decisive factor in determining for macromolecules to be incorporated into growing minerals or to remain intact on the mineral surface with no incorporation is the magnitude of binding strength of the macromolecules to the growing step against the step’s propagation force.

36 MATERIALS SCIENCE↗

Third international challenge to model the medium- to long-range transport of radioxenon to four Comprehensive Nuclear-Test-Ban Treaty monitoring stations

In 2015 and 2016, atmospheric transport modeling challenges were conducted in the context of the Comprehensive Nuclear-Test-Ban Treaty (CTBT) verification, however, with a more limited scope with respect to emission inventories, simulation period and number of relevant samples (i.e., those above the Minimum Detectable Concentration (MDC)) involved. Therefore, a more comprehensive atmospheric transport modeling challenge was organized in 2019. Stack release data of Xe-133 were provided by the Institut National des Radioéléments/IRE (Belgium) and the Canadian Nuclear Laboratories/CNL (Canada) and accounted for in the simulations over a three (mandatory) or six (optional) months period. Best estimate emissions of additional facilities (radiopharmaceutical production and nuclear research facilities, commercial reactors or relevant research reactors) of the Northern Hemisphere were included as well. Model results were compared with observed atmospheric activity concentrations at four International Monitoring System (IMS) stations located in Europe and North America with overall considerable influence of IRE and/or CNL emissions for evaluation of the participants’ runs. Participants were prompted to work with controlled and harmonized model set-ups to make runs more comparable, but also to increase diversity. It was found that using the stack emissions of IRE and CNL with daily resolution does not lead to better results than disaggregating annual emissions of these two facilities taken from the literature if an overall score for all stations covering all valid observed samples is considered. A moderate benefit of roughly 10% is visible in statistical scores for samples influenced by IRE and/or CNL to at least 50% and there can be considerable benefit for individual samples. Effects of transport errors, not properly characterized remaining emitters and long IMS sampling times (12–24 h) undoubtedly are in contrast to and reduce the benefit of high-quality IRE and CNL stack data. Complementary best estimates for remaining emitters push the scores up by 18% compared to just considering IRE and CNL emissions alone. Despite the efforts undertaken the full multi-model ensemble built is highly redundant. An ensemble based on a few arbitrary runs is sufficient to model the Xe-133 background at the stations investigated. The effective ensemble size is below five. An optimized ensemble at each station has on average slightly higher skill compared to the full ensemble. However, the improvement (maximum of 20% and minimum of 3% in RMSE) in skill is likely being too small for being exploited for an independent period.

54 ENVIRONMENTAL SCIENCES↗

Oxidation of ultrahigh temperature ceramics: kinetics, mechanisms, and applications

Materials capable of oxidizing in a protective manner at ultrahigh (>1700 °C) temperatures are needed to push beyond this barrier defined by SiC. Although possessing attractive mechanical properties and oxidation resistance, SiC-based materials are ultimately temperature limited by the melting point of SiO 2 . The vast array of ultra-high and high temperature ceramic literature indicates the majority of these materials, like borides, carbides, MAX-phases, and high-entropy ceramics, fall woefully short regarding oxidation resistance. However, for specific applications, like low-orbit aeropropulsion, high ballistics coefficient atmospheric re-entry, and hypersonic cruise, there are a few promising materials. Here, oxidation criteria are gathered to build application specific heuristics and are then applied to a multitude of ultra-high temperature ceramics to gauge material efficacy. Discussion of oxidation kinetics, mechanisms and reaction products is offered for each material, identifying strengths, weaknesses, and the remaining gaps in our knowledge.

36 MATERIALS SCIENCE↗

Joining sheet aluminum AA6061-T4 to cast magnesium AM60B by vaporizing foil actuator welding: Input energy, interface, and strength

Dissimilar joining of sheet aluminum AA6061-T4 to cast magnesium AM60B was achieved by vaporizing foil actuator welding (VFAW). Three input energy levels were used (6, 8, and 10 kJ), and as a trend, higher input energies resulted in progressively higher flyer velocities, more pronounced interfacial wavy features, larger weld zones, higher peel strengths, and higher peel energies. In all cases, weld cross section revealed a soundly bonded interface characterized by well-developed wavy features and lack of voids and continuous layers of intermetallic compounds (IMCs). At 10 kJ input energy, flyer speed of 820 m/s, peel strength of 22.4 N/mm, and peel energy of 5.2 J were obtained. In lap-shear, failure occurred in AA6061- T4 flyer at 97% of the base material’s peak tensile load. Peel samples failed along the weld interface, and the AM60B-side of the fracture surface showed thin, evenly-spaced lines of Al residuals which had been torn out of the base AA6061-T4 in a ductile fashion and transferred over to the AM60B side, indicating very strong AA6061-T4/AM60B bond in these areas. Furthermore, this work demonstrates VFAW’s capability in joining dissimilar lightweight metals such as Al/Mg, which is expected to be a great enabler in the ongoing push for vehicle weight reduction.

36 MATERIALS SCIENCE↗

Impact of lead on an axisymmetric, single bead blown powder DED overhung geometry

Metal additive manufacturing can be utilized for the near net-shape manufacture of components in a layer wise technique. Traditionally, the buildup process is conducted in the direction of gravity or bottom to top in the vertical orientation; however, with the availability of commercial systems with additive heads or fixturing that can index from vertical, and the need to manufacture larger parts without modifying available systems, the limitation of manufacturing from bottom to top is removed enabling the buildup of larger components printed at an angle from vertical. The effect of gravity on the melt pool and as-deposited component quality when printing off vertical is unknown in literature, especially for axisymmetric components. This understanding is critical for the advancement of manufacturing components of increased size in 4 and 5-axis additive systems. This investigation utilizes blown powder directed energy deposition to evaluate the change in as-printed geometry when the start point is altered in relation to gravity while the part rotates to manufacture an axisymmetric component. The objectives of this work are to determine the impact of the deposition location on the geometric variability on axisymmetric components. This investigation tests the hypothesis that differences in layer height exist due to a change in catchment efficiency when the deposition location is moved to a tangent of the round geometry due to a change in the melt pool dynamics. It was found the ideal deposition location when printing at 26.6-degrees from vertical was at −90-degrees from the top center point of the component, along the tangent, where gravity was pushing the melt pool down, but the rotation of the part was pulling the deposited material towards the top center of the component. This work provides an understanding of layer height stability and catchment efficiency to guide print orientation strategy for high-aspect ratio components. It was found the −90-degree lead deposition had the best layer height stability at 0.6 % as compared to the top-center at 6.3 % and +90-degree deposition location at 9.2 % for the nominal programmed layer height. The change in layer height also effected the final diameter the greatest for the top center deposition location where the diameter diverged by 2.5 % during the overbuild condition and converged by 0.6 %. In conclusion, this finding will increase the manufacturing efficiency of axisymmetric components by increasing the passive stability of the printing process for the successful manufacture of parts without the need for perfectly calibrated manufacturing parameters.

36 MATERIALS SCIENCE↗

Aligned carbon fibers-carbon nanotube-polymer-based composite as lithium-ion battery current collector

High energy density demand is pushing the development of high-voltage cathode materials, which necessitates improved electrochemical stability of other battery components such as binders, electrolytes, and current collectors. Current collectors are considered to be an inactive component but still play an essential role. In this study, a metal-free composite film containing directionally aligned carbon fiber (CF), carbon nanotube (CNT), and polymer (P) was developed to replace aluminum foil as a cathode current collector, which relies on forming an Al 2 O 3 layer to ensure electrochemical stability at high voltage. Here, each component in the new cathode current collector played a functional role. The CNTs provided uniform current densities, and CFs improved the electronic conductivity and mechanical strength of the composite material. The polymer enhanced the adhesion of the cathode coating with the current collector and provided an impervious support to the cathode materials. The CF-CNT-P composite demonstrated excellent electrochemical and thermal stability. Cathodes coated on the CF-CNT-P composite exhibited lower charge transfer resistance, improved rate capability, and improved cyclic stability compared with the cathodes deposited on conventional aluminum foil. Additionally, the composite current collector was lighter (1.81 mg/cm 2 and 15 µm thick) than the commonly used aluminum foil (4.35 mg/cm2 and 15 µm thick), which can increase the cell energy density. Additionally, the CF-CNT-P did not need to be separated from the cathode coating during recycling and can be burnt out with binder, simplifying the recycling process.

25 ENERGY STORAGE↗

Numerical simulations of vertical growth of hydraulic fractures and brine migration in geological formations above the Marcellus shale

One of the critical environmental questions about hydraulic fracturing in shales is the potential for contamination of ground and surface water. There are two specific concerns arising from hydraulic treatments: 1) whether hydraulic fractures extend upward through overlying strata to reach overlying aquifers containing drinking water, and 2) whether injected fluids push native fluids upward into these overlying aquifers. In this work, the extent of likely fracture growth through overlying layers during hydraulic treatment of the Marcellus shale was estimated using a hydraulic fracture model. A wide range of material and fluid flow properties in a multi-layered geologic model was considered. The model was based on conditions and characteristics applicable to the Marcellus shale in that part of the Appalachian basin within southwestern Pennsylvania. Predictions of vertical termination frequencies for hydraulic fractures were used in a multi-layer model of the strata and natural fractures for studying brine migration through the natural and induced fracture network. NFFLOW, the software for explicitly modeling flow within networks of fractures, was utilized to compute transient flow rates according to the schedule of injected fluid during hydraulic fracturing. To aid our analysis, the modeled sequence of geologic strata was capped with a fictitious unfractured, but moderately-permeable layer, which serves as a monitoring zone. The analysis assumes one well lateral was placed in the middle of the Marcellus shale with hydraulic fractures penetrating layers in the model. The newly-developed geomechanical module within NFFLOW was used to represent stress-sensitivity of the fractures. This allows the opening and closing of fracture apertures with changes in fluid pressures within fracture segments. Pressure increases in the formations overlying the Tully limestone, indicating fluid flow, was observed due to the hydraulic stimulation; and the impact of these increased pressures on brine migration towards the surface was considered.

03 NATURAL GAS↗

Development of U-Frame Bending System for Studying the Vibration Integrity of Spent Nuclear Fuel

A bending fatigue system developed to evaluate the response of spent nuclear fuel rods to vibration loads is presented. Design and analysis, fabrication, modification, calibration, and instrumentation are described. The system is composed of a U-frame testing setup for imposing bending loads on the spent fuel rod test specimen and a method for measuring the curvature of the rod during bending. The U-frame setup consists of two rigid arms, linking members, and linkages to a universal testing machine. The test specimen s curvature of bending is obtained through a three-point deflection measurement method consisting of three LVDTs mounted to the side connecting plates of the U-frame to capture the deformation of the test specimen. The system has some unique features: 1) The test specimen is installed by simple insertion using linear bearings incorporated with rigid sleeves. 2) Reverse cyclic bending tests can be carried out effectively and efficiently by push and pull at the loading point of the setup. Any test machine with a linear motion function can be used to drive the setup. 3) The embedded and preloaded linear roller bearings eliminate the backlash that exists in the conventional reverse bend tests. 4) The number of linkages between the U-frame and the universal machine is minimized. Namely, there are only two linkages needed at the two loading points of a U-frame setup, whereas a conventional four/three-point bend test frame requires four linkages. 5) The curvature measurement is immune to the effects arising from compliant layers and the rigid body motion of the machine. The compliant layers are used at the holding areas of the specimen to prevent contact damage. The tests using surrogate specimens composed of SS cladding/tube revealed several important phenomena that may cast light on the expected response of a spent fuel rod: 1) Cyclic quasi-static load (10 N/s under force control) in compressive mode (with respect to that at the loading point of the U-frame) produced increased irreversible or plastic curvature and also increased flexural rigidity of the surrogate rod. 2) Dynamic cyclic load (at least 1 Hz) in compressive mode resulted in increased flexural rigidity of the surrogate rod prior to SS cladding fracture. 3) Pellets and epoxy bonding exhibited various effects on the response of surrogate rods during the loading process as validated from static tests. 4) Dynamic cyclic load (2 Hz) in reverse mode demonstrated a substantial cyclic softening before the fracture of the surrogate rod. The degree of decrease in flexural rigidity was consistent in both measurement and on-line monitoring. The developed U-frame system is thus verified and demonstrated to be ready for further pursuit in hot-cell tests.

fuel transporation↗

Nucleation and growth of tungsten nanotendrils grown under divertor-like conditions

Tungsten is the primary candidate for plasma-facing materials in the critical regions of a magnetic fusion energy (MFE) device, such as a tokamak. However, tungsten (and many other metals) grow copious nanotendril "fuzz" when exposed to fusion-relevant He-bearing plasmas, and the impact of this fuzz on reactor operation is still unknown. Further, the mechanism of fuzz growth is also poorly understood at present. In order to experimentally probe the growth mechanisms, we developed a new sample preparation technique to examine the interface of individual nanotendril roots with the substrate (substrate/tendril interface) using electron microscopy and measured the grain boundary character distributions (GBCDs) of substrate/tendril interfaces, the GBs within individual tendrils (tendril/tendril interfaces), and GBs within the substrate (substrate/substrate interfaces). We find the substrate/tendril and tendril/tendril GBCDs are essentially indistinguishable, but very different from the substrate/substrate GBCDs, which implies that tendril growth periodically forms new GBs at the substrate/tendril interface, and these GBs are pushed upward to become tendril/tendril interfaces within the fuzz mat. These results will help guide future computational modelling studies to elucidate the details of the growth mechanisms.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Evaluation of post-weld heat treatments applied to FeCrAl alloy weldments

The nuclear incident at the Fukushima Daiichi nuclear power plant has created a strong push for accident-tolerant fuel cladding to replace current zirconium-based cladding. A current near-term focus on iron-chromium-aluminum (FeCrAl) alloys. Laser-welded FeCrAl samples (C35MN, C37M, and C35M10 TC) were subjected to three different post-weld heat treatment regimes: 650 °C for 5 h, 850 °C for 1 h, and 850 °C for 5 h. Here, the samples were then analyzed using optical light microscopy, micro-hardness indentation, and scanning electron microscopy coupled with energy-dispersive spectroscopy and electron backscatter diffraction. The base microstructure of C37M and C35M10 TC experienced significant grain coarsening outside the fusion zone due to the applied post-weld heat treatments, whereas Nb-rich precipitation in C35MN limited grain growth compared with the other alloys studied.

36 MATERIALS SCIENCE↗

Application of BISON to UO 2 MiniFuel fission gas release analysis

There has been a recent push to accelerate fuel qualification by developing revolutionary capabilities to reduce irradiation periods, and thereby, reduce the time required to qualify a new fuel system. One such capability is the MiniFuel irradiation capsule designed to miniaturize fuel samples and irradiate “mini” fuel samples under isothermal temperature conditions. MiniFuel allows steady-state irradiations to decouple the traditionally coupled fission rate (i.e., power) and temperature parameters to understand and generate microstructures observed in fuel operated in a commercial reactor. Furthermore, this process offers the possibility to gather in situ data as well as postirradiation or transient data such as thermal conductivity, specific heat, fission gas diffusion and release, etc. However, accelerating fuel qualification is not solely reliant on generating large amounts of data but also on developing an informed test matrix designed to rapidly generate impactful data. Additionally, this process is reliant on fuel performance codes, such as BISON, to evaluate MiniFuel irradiations using existing material models. This process pinpoints model/data gaps, identifies desired irradiation conditions, and subsequently supports model validation and development. This work describes the use of BISON to perform a number of sensitivity studies designed to understand conditions that lead to fission gas release (FGR) under steady-state isothermal irradiation conditions and temperature transient conditions. The model is applied to a UO 2 MiniFuel example and shows an overall good qualitative agreement with experimental FGR annealing tests under different temperature conditions. It also accounts well for microstructural effects on FGR. When quantitatively compared with FGR data from previously irradiated 103 MWd/kgU UO 2 discs under thermal annealing, the model shows a less satisfactory agreement with the experimental data. Finally, a UO 2 MiniFuel test matrix is proposed to help to extend the model's operational range and validate the new FGR model capabilities to higher burnups and transient conditions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Identifying microstructures susceptible to pulverization in commercially irradiated high burnup UO2 under LOCA conditions

High burnup fuel fragmentation (HBFF) has been a concern in the nuclear industry for many years. When UO2 reaches and exceeds pellet average burnups around 55 GWd/tU, microstructural changes in the fuel pellet begin to occur that render the pellet susceptible to fine fragmentation under loss-of-coolant accident (LOCA) conditions. During a LOCA event, the cladding balloons and bursts, potentially releasing part of these fine fuel fragments into the reactor pressure vessel. This process is known as fuel fragmentation, relocation, and dispersal (FFRD). Presently, the US nuclear industry is developing a safety basis for FFRD with the goal of increasing burnups and pressurized water reactor cycle lengths. Increased cycle lengths would push the burnup limits of the fuel rods past the known threshold for HBFF susceptibility. In this work, the microstructural impact on HBFF was investigated by comparing the microstructures of as-irradiated rod segments to their post-LOCA tested counterparts. This investigation found that varied operational histories result in different microstructural evolutions across the pellet radius, which impacts the fragmentation behavior and radial location of the fragmentation. It is noted that regions with a high bubble density and a high density of grain boundaries fragment under LOCA-relevant conditions. In addition to the fragmentation that has been previously reported at the periphery of the fuel, fragmentation was also noted in the dark zone toward the fuel center. Analysis of the power histories of the fuel samples suggests that the dark zone forms in the central regions of the pellet between temperatures of approximately 740 and 960 °C.

McKinney, Casey [ORNL] (ORCID:0000000335383614)↗

Battery calendar aging and machine learning

Batteries continue to attract immense attention due to the critical need for new energy technologies that can help humankind transition to a net-zero future. To meet global goals for implementation of new batteries, the research community needs to more coherently consider how to go about the process of innovation, development, and validation of new technologies. Current practices for bringing a new battery technology from the benchtop to deployment can be very time consuming and complex, given that batteries can have distinct aging pathways based on both how they are cycled and their storage conditions. In nearly all use cases, batteries experience periods of active cycling and also extended periods of rest. Thus, calendar time often occurs when a battery is close to fully charged. Currently, the combined cycle and calendar life aspects receive inconsistent attention during most stages of research and development. For batteries to fulfill the critical role envisioned to meet global energy demands, greater uniformity in practice is needed to alleviate potential delays caused by the inconsistent acquisition of aging data. In this study, we present our thoughts and recommendations on the need to further advance commonality and availability of calendar aging data for emerging high-energy and long-duration batteries. While there is a broad need to adopt best practices for both calendar and cycle life assessment, a push to greater uniformity in approach and reporting is sorely needed to allow calendar life predictions to harness many of the advances that have recently been seen for cycle life prediction using machine learning (ML) and other techniques.

25 ENERGY STORAGE↗