Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PHOTOEMISSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Structural and magnetic properties of quasi-one-dimensional doped LiCuVO{sub 4}

The Neutron diffraction, X-ray photoemission and Magnetic properties of Zn, Co and Mn-doped LiCuVO{sub 4} were investigated. Both with Zn and Co doping the antiferromagnetic correlation increase. On the other hand Mn-doping induces the short range ferromagnetic ordering. Neutron diffraction study does not show any phase transition down to 5 K i.e., there is no indication of long range magnetic ordering. Neutron diffraction study also indicates that with Zn, Co and Mn doping the V–O lengths are changed. Maximum change in the V–O distances is observed for Mn-doped sample. On the other hand, X-ray photoemission spectroscopic data indicates Mn doping converts some Cu{sup 2+} ions into Cu{sup 3+} ions. - Graphical abstract: LiCuVO{sub 4} is a quasi-one-dimensional spin magnet. It shows antiferromagnetic ordering. It is observed when Mn is doped in the Cu site of LiCuVO{sub 4} a short range ferromagnetic ordering occurs. - Highlights: • LiCuVO{sub 4} is an one-dimensional spin chain system. • Mn ion is doped in Cu site to induce ferromagnetism. • Doping of Mn ion changes the Cu–O–Cu bond angle which in effect induces ferromagnetism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Morphology and magneto-transport properties of electron doped La{sub 0.85}Te{sub 0.15}MnO{sub 3} thin film deposited on LaAlO{sub 3} substrate

Graphical abstract: Resistivity versus temperature plots of La{sub 0.85}Te{sub 0.15}MnO{sub 3} thin film under the applied magnetic field of 0 T, 5 T and 8 T. - Highlights: • La{sub 0.85}Te{sub 0.15}MnO{sub 3} manganite thin film is deposited on LaAlO{sub 3} using PLD technique. • Film is deposited at 750 °C, and is highly crystalline, single phase and c-axis oriented. • The film consists of grains with an average diameter of 60 nm. • Resistivity plots display double insulator-metal transitions. • XPS results confirm the electron doped (n-type) nature of the film. - Abstract: We report the structural, electronic transport and X-ray photoemission spectroscopic study of 100 nm thin film of La{sub 0.85}Te{sub 0.15}MnO{sub 3} grown on (0 0 1) LaAlO{sub 3} single crystal substrate by pulsed laser deposition. XRD results confirm that the film has good crystalline quality, single phase, and has a c-axis orientation. The atomic force microscopic (AFM) results showed that the film consists of grains with an average diameter of 60 nm. The resistivity measurement showed double insulator-metal transitions in absence and as well as in presence of the magnetic field. The resistivity peaks are ascribed to the intrinsic contribution of LTMO film and the tunnelling of spin-polarized electrons at grain boundaries. X-ray photoemission spectroscopy measurements suggest that Te ions are in the Te{sup 4+} state, while the Mn ions are forced to stay in the Mn{sup 2+} and Mn{sup 3+} valence state.

36 MATERIALS SCIENCE↗

Epitaxial corundum-VTiO 3 thin films grown on c-cut sapphire

Corundum structured VTiO 3 has been grown as epitaxial films on c-cut sapphire by laser molecular beam epitaxy. The properties of the film were characterized by reflection high energy electron diffraction, x-ray diffraction, transmission electron microscopy, and photoemission spectroscopy. All the structural probes clearly indicate the corundum structure of the film. X-ray photoemission spectroscopy (XPS) indicates that V is in a 3+ charge state implying that Ti also needs to adopt a 3+ charge state in order for the corundum structure to form. However, the Ti-2p XPS, while clearly broadened to the lower binding energy side compared to TiO 2 , also exhibits a pronounced Ti 4+ component. This is tentatively assigned to a final state effect in XPS measurements and not as the true cation state. In conclusion, the valence band spectra show occupation of 3d metal states that resemble more closely those of Ti 2 O 3 than for V 2 O 3 , suggesting that only the a1g molecular states are occupied.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Spectroscopic evidence of the formation of (V,Ti)O{sub 2} solid solution in VO{sub 2} thinner films grown on TiO{sub 2}(001) substrates

We have prepared VO{sub 2} thin films epitaxially grown on TiO{sub 2}(001) substrates with thickness systematically varied from 2.5 to 13 nm using a pulsed laser deposition method, and studied the transport property and electronic states of the films by means of resistivity and in situ synchrotron photoemission spectroscopy (SRPES). In resistivity measurements, the 13-nm-thick film exhibits a metal-insulator transition at around 290 K on cooling with change of three orders of magnitudes in resistivity. As the film thickness decreases, the metal-insulator transition broadens and the transition temperature increases. Below 4 nm, the films do not show the transition and become insulators. In situ SRPES measurements of near the Fermi level valence band find that the electronic state of the 2.5-nm-thick film is different than that of the temperature-induced insulator phase of VO{sub 2} itself although these two states are insulating. Ti 2p core-level photoemission measurements reveal that Ti ions exist near the interface between the films and TiO{sub 2} substrates, with a chemical state similar to that in (V,Ti)O{sub 2} solid solution. These results indicate that insulating (V,Ti)O{sub 2} solid solution is formed in the thinner films. We propose a simple growth model of a VO{sub 2} thin film on a TiO{sub 2}(001) substrate. Near the interface, insulating (V,Ti)O{sub 2} solid solution is formed due to the diffusion of Ti ions from the TiO{sub 2} substrate into the VO{sub 2} film. The concentration of Ti in (V,Ti)O{sub 2} is relatively high near the interface and decreases toward the surface of the film. Beyond a certain film thickness (about 7 nm in the case of the present 13-nm-thick film), the VO{sub 2} thin film without any Ti ions starts to grow. Our work suggests that developing a technique for preparing the sharp interface between the VO{sub 2} thin films and TiO{sub 2} substrates is a key issue to study the physical property of an ultrathin film of ''pure'' VO{sub 2}, especially to examine the presence of the novel electronic state called a semi-Dirac point phase predicted by calculations.

36 MATERIALS SCIENCE↗

Droplet Charging Effects in the Space Environment

Several applications exist for transiting liquid droplets through the near-Earth space environment. Numerical results are presented for the charging of liquid droplets of trimethyl pentaphenyl siloxane (DC705) in three different plasma environments: ionosphere, auroral, and geosynchronous Earth orbit (GEO). Nominal and high geomagnetic activity cases are investigated. In general, high levels of droplet charging (>100 V) exist only in GEO during periods of high geomagnetic or solar activity. An experiment was conducted to assess the charging of silicon-oil droplets due to photoemission. The photoemission yield in the 120-200 nm wavelength range was found to be approximately 0.06.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Large area quasi-free standing monolayer graphene on 3C-SiC(111)

Large scale, homogeneous quasi-free standing monolayer graphene is obtained on cubic silicon carbide, i.e., the 3C-SiC(111) surface, which represents an appealing and cost effective platform for graphene growth. The quasi-free monolayer is produced by intercalation of hydrogen under the interfacial, (6{radical}(3)x6{radical}(3))R30 deg.-reconstructed carbon layer. After intercalation, angle resolved photoemission spectroscopy reveals sharp linear {pi}-bands. The decoupling of graphene from the substrate is identified by x-ray photoemission spectroscopy and low energy electron diffraction. Atomic force microscopy and low energy electron microscopy demonstrate that homogeneous monolayer domains extend over areas of hundreds of square-micrometers.

36 MATERIALS SCIENCE↗

Charge distribution over dust particles in a flowing plasma

This paper presents an analytical model for the physical understanding of the charge distribution on dust particles in meso-thermal flow of plasmas where the flow speed of plasma relative to the dust particle is larger than the ion thermal speed but much less than the thermal speed of electrons. The formulation is based on the master difference equation for population balance and the number and energy balance considerations, allowing the charge to be only an integral multiple (positive or negative) of the electronic charge. The kinetics for (i) dark complex plasmas where accretion of electrons/ionic species are the dominant charging mechanisms and (ii) illuminated complex plasmas where photoemission significantly contributes to dust charging has been developed. The expression for the mean energy associated with the accretion of ionic species over dust gains in meso-thermal flow of complex plasmas has been derived and employed to obtain the charge distribution and other relevant plasma parameters. The high speed of meso-thermal flow of the plasma influences the dust charging towards more positive character and leads to significant reduction in electron and ion densities, even in the presence of photoemission from dust grains.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Charge transfer interactions of a Ru(II) dye complex and related ligand molecules adsorbed on Au(111)

The interaction of the dye molecule, N3 (cis-bis(isothiocyanato)bis(2,2{sup '}-bipyridyl-4,4{sup '}-dicarboxylato) -ruthenium(II)), and related ligand molecules with a Au(111) surface has been studied using synchrotron radiation-based electron spectroscopy. Resonant photoemission spectroscopy (RPES) and autoionization of the adsorbed molecules have been used to probe the coupling between the molecules and the substrate. Evidence of charge transfer from the states near the Fermi level of the gold substrate into the lowest unoccupied molecular orbital (LUMO) of the molecules is found in the monolayer RPES spectra of both isonicotinic acid and bi-isonicotinic acid (a ligand of N3), but not for the N3 molecule itself. Calibrated x-ray absorption spectroscopy and valence band spectra of the monolayers reveals that the LUMO crosses the Fermi level of the surface in all cases, showing that charge transfer is energetically possible both from and to the molecule. A core-hole clock analysis of the resonant photoemission reveals a charge transfer time of around 4 fs from the LUMO of the N3 dye molecule to the surface. The lack of charge transfer in the opposite direction is understood in terms of the lack of spatial overlap between the {pi}*-orbitals in the aromatic rings of the bi-isonicotinic acid ligands of N3 and the gold surface.

36 MATERIALS SCIENCE↗

Space charge corrected electron emission from an aluminum surface under non-equilibrium conditions

A theoretical study has been conducted of ultrashort pulsed laser induced electron emission from an aluminum surface. Electron emission fluxes retrieved from the commonly employed Fowler-DuBridge theory were compared to fluxes based on a laser-induced non-equilibrium electron distribution. As a result, the two- and three-photon photoelectron emission parameters for the Fowler-DuBridge theory have been approximated. We observe that at regimes where photoemission is important, laser-induced electron emission evolves in a more smooth manner than predicted by the Fowler-DuBridge theory. The importance of the actual electron distribution decreases at higher laser fluences, whereas the contribution of thermionic emission increases. Furthermore, the influence of a space charge effect on electron emission was evaluated by a one dimensional particle-in-cell model. Depending on the fluences, the space charge reduces the electron emission by several orders of magnitude. The influence of the electron emission flux profiles on the effective electron emission was found to be negligible. However, a non-equilibrium electron velocity distribution increases the effective electron emission significantly. Our results show that it is essential to consider the non-equilibrium electron distribution as well as the space charge effect for the description of laser-induced photoemission.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The effects of vacuum ultraviolet radiation on low-k dielectric films

Plasmas, known to emit high levels of vacuum ultraviolet (VUV) radiation, are used in the semiconductor industry for processing of low-k organosilicate glass (SiCOH) dielectric device structures. VUV irradiation induces photoconduction, photoemission, and photoinjection. These effects generate trapped charges within the dielectric film, which can degrade electrical properties of the dielectric. The amount of charge accumulation in low-k dielectrics depends on factors that affect photoconduction, photoemission, and photoinjection. Changes in the photo and intrinsic conductivities of SiCOH are also ascribed to the changes in the numbers of charged traps generated during VUV irradiation. The dielectric-substrate interface controls charge trapping by affecting photoinjection of charged carriers into the dielectric from the substrate. The number of trapped charges increases with increasing porosity of SiCOH because of charge trapping sites in the nanopores. Modifications to these three parameters, i.e., (1) VUV induced charge generation, (2) dielectric-substrate interface, and (3) porosity of dielectrics, can be used to reduce trapped-charge accumulation during processing of low-{kappa} SiCOH dielectrics. Photons from the plasma are responsible for trapped-charge accumulation within the dielectric, while ions stick primarily to the surface of the dielectrics. In addition, as the dielectric constant was decreased by adding porosity, the defect concentrations increased.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Determination of the charge neutrality level of poly(3-hexylthiophene)

The Al/poly(3-hexylthiophene) (P3HT) and Ag/P3HT interfaces were investigated using photoemission spectroscopy in combination with in situ thin-film deposition. The P3HT thin films were deposited directly into high vacuum from solution on the two metal substrates using an electrospray system and characterized via photoemission spectroscopy. The electronic structure and charge injection barriers at these interfaces were determined from the evaluation of the resulting spectra sequences. A linear correlation between barrier heights and substrate work functions was observed from the collected data in combination with previously published results, suggesting that the 'Induced Density of Interfaces States' model for small molecular materials is also valid for conjugated polymer interfaces. The corresponding P3HT 'screening factor' as well as its charge neutrality level was determined to be 0.48 and 3.44 eV, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Record high-average current from a high-brightness photoinjector

High-power, high-brightness electron beams are of interest for many applications, especially as drivers for free electron lasers and energy recovery linac light sources. For these particular applications, photoemission injectors are used in most cases, and the initial beam brightness from the injector sets a limit on the quality of the light generated at the end of the accelerator. At Cornell University, we have built such a high-power injector using a DC photoemission gun followed by a superconducting accelerating module. Recent results will be presented demonstrating record setting performance up to 65 mA average current with beam energies of 4-5 MeV.

43 PARTICLE ACCELERATORS↗

Nanoscale imaging of photoelectrons using an atomic force microscope

Photoemission current imaging at the nanoscale is demonstrated by combining an atomic force microscope with laser excitation. Photoelectrons emitted from the sample are collected by the tip while the tip-sample distance is precisely controlled by their van der Waals force interaction. We observe pronounced photoemission current contrast with spatial resolution of 5 nm on a cesium covered Au(111) surface. This high spatial resolution can be attributed to the strong dependence of the local potential barrier on the tip-sample distance. Our experiments provide a method for photoelectron imaging with high spatial resolution and extend the functionality of state-of-the-art scanning probe techniques.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Adsorption geometry, conformation, and electronic structure of 2H-octaethylporphyrin on Ag(111) and Fe metalation in ultra high vacuum

Due to the growing interest in the ferromagnetic properties of Fe-octaethylporphyrins (Fe-OEP) for applications in spintronics, methods to produce stable Fe-porphyrins with no Cl atoms are highly demanded. Here, we demonstrate the formation of Fe-OEP layers on Ag(111) single crystal by the ultra high vacuum in situ metalation of the free-base 2H-2,3,7,8,12,13,17,18-octaethylporphyrin (2H-OEP) molecules. The metalation proceeds exactly as in the case of 2H-5,10,15,20-tetraphenylporphyrin (2H-TPP) on the same substrate. An extensive surface characterization by means of X-ray photoemission spectroscopy, valence band photoemission, and NEXAFS with synchrotron radiation light provides information on molecular conformation and electronic structure in the monolayer and multilayer cases. We demonstrate that the presence of the ethyl groups affects the tilt of the adsorbed molecules, the conformation of the macrocycle, and the polarization screening in multilayers, but has only a minor effect in the metalation process with respect to 2H-TPP.

36 MATERIALS SCIENCE↗

Photonically excited electron emission from modified graphitic nanopetal arrays

Efficient electron emission for energy conversion requires a low work function and a stable emitter material. The work function of graphene-based carbon materials can decrease significantly by intercalation with alkali metals, thus increasing their emission current. In this work, electron emission from potassium-intercalated carbon nanosheet extensions grown on electrode graphite is investigated. These petal-like structures, composed of 5-25 layers of graphene, are synthesized using microwave plasma chemical vapor deposition. Samples are intercalated with potassium, and a hemispherical energy analyzer is used to measure the emission intensity caused by both thermal and photonic excitation. The emission from the potassium-intercalated structures is found to consistently decrease the work function by 2.4 to 2.8 eV relative to non-intercalated samples. High emission intensity induced by photonic excitation from a solar simulator, with a narrow electron energy distribution relative to established theory, suggests that electron scattering decreases emitted electron energy as compared to surface photoemission. A modified photoemission theory is applied to account for electron scattering, and the sample work function and mean number of scattering events are used as parameters to fit theory to experimental data. The thermal stability of the intercalated nanopetals is investigated, and after an initial heating and cooling cycle, the samples are stable at low temperatures.

36 MATERIALS SCIENCE↗

Electrical conductivity of Sr{sub 2−x}VMoO{sub 6−y} (x = 0.0, 0.1, 0.2) double perovskites

Electrical conductivity of Sr{sub 2-x}VMoO{sub 6-y} (x = 0.0, 0.1, 0.2) double perovskites has been investigated in a reducing atmosphere at temperatures up to 800 °C. This material has a key application in solid oxide fuel cell anodes as a mixed ion and electron conductor. A solid state synthesis technique was used to fabricate materials and crystal structure was verified through x-ray diffraction. Subsequent to conventional sintering in a reducing environment, elemental valence states were indentified through x-ray photoemission spectroscopy on the double perovskite material before and after annealing in a hydrogen environment. Samples exhibited metallic like conduction with electrical conductivities of 1250 S/cm (Sr{sub 2}VMoO{sub 6-y′}), 2530 S/cm (Sr{sub 1.8}VMoO{sub 6-y″}), and 3610 S/cm (Sr{sub 1.9}VMoO{sub 6-y‴}) at 800 °C in 5% H{sub 2}/95% N{sub 2}, with a substantial increase in conductivity upon cooling to room temperature. Room temperature electrical conductivity values for Sr{sub 1.9}VMoO{sub 6-y‴} make it a candidate as the highest electrically conductive oxide known. Highly insulating secondary surface phases, Sr{sub 3}V{sub 2}O{sub 8}, and SrMoO{sub 4}, begin to reduce at 400 °C in a hydrogen environment, as confirmed by X-ray photoemission and thermal gravimetric analysis. This reduction, from V{sup 5+} and Mo{sup 6+} to lower valence states, leads to a large increase in sample electrical conductivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Inverse bremsstrahlung heating rate for dense plasmas in laser fields

We report a theoretical analysis of inverse bremsstrahlung heating rate in the eikonal approximation. The present analysis is performed for a dense plasma using the screened electron-ion interaction potential for the ion charge state Z{sub i} = 1 and for both the weak and strong plasma screening cases. We have also compared the eikonal results with the first Born approximation (FBA) [M. Moll et al., New J. Phys. 14, 065010 (2012)] calculation. We find that the magnitudes of inverse bremsstrahlung heating rate within the eikonal approximation (EA) are larger than the FBA values in the weak screening case (κ = 0.03 a.u.) in a wide range of field strength for three different initial electron momenta (2, 3, and 4 a.u.). But for strong screening case (κ = 0.3 a.u.), the heating rates predicted by the two approximations do not differ much after reaching their maximum values. Furthermore, the individual contribution of photoemission and photoabsorption processes to heating rate is analysed for both the weak and strong screening cases. We find that the single photoemission and photoabsorption rates are the same throughout the field strength while the multiphoton absorption process dominates over the multiphoton emission process beyond the field strength ≈ 4×10{sup 8} V/cm. The present study of the dependence of heating rate on the screening parameter ranging from 0.01 to 20 shows that whereas the heating rate predicted by the EA is greater than the FBA up to the screening parameter κ = 0.3 a.u., the two approximation methods yield results which are nearly identical beyond the above value.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Sulfur passivation of surface electrons in highly Mg-doped InN

Electron accumulation with a sheet density greater than 10{sup 13} cm{sup −2} usually occurs at InN surfaces. Here, the effects of treatment with ammonium sulfide ((NH{sub 4}){sub 2}S{sub x}) on the surface electronic properties of highly Mg-doped InN (>4×10{sup 18} cm{sup −3}) have been investigated with high resolution x-ray photoemission spectroscopy. The valence band photoemission spectra show that the surface Fermi level decreases by approximately 0.08 eV with (NH{sub 4}){sub 2}S{sub x} treatment, resulting in a decrease of the downward band bending and up to a 70% reduction in the surface electron sheet density.

36 MATERIALS SCIENCE↗