Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PHASE DIAGRAMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Stripe magnetic order and field-induced quantum criticality in the perfect triangular-lattice antiferromagnet CsCeSe 2

The two-dimensional triangular-lattice antiferromagnet (TLAF) is a textbook example of frustrated magnetic systems. Despite its simplicity, the TLAF model exhibits a highly rich and complex magnetic phase diagram, featuring numerous distinct ground states that can be stabilized through frustrated next-nearest-neighbor couplings or anisotropy. In this paper, we report low-temperature magnetic properties of the TLAF material CsCeSe 2 . The inelastic neutron scattering (INS) together with specific heat measurements and density functional theory calculations of crystalline electric field suggest that the ground state of Ce ions is a Kramers doublet with strong easy-plane anisotropy. Elastic neutron scattering measurements demonstrate the presence of stripe-yz magnetic order that develops below T N = 0.35K, with the zero-field ordered moment of m Ce ≈ 0.65μ B . Application of magnetic field first increases the ordering temperature by about 20% at the intermediate field region and eventually suppresses the stripe order in favor of the field-polarized ferromagnetic state via a continuous quantum phase transition (QPT). The field-induced response demonstrates sizable anisotropy for different in-plane directions, B ∥ a and B ⊥ ⁢a, which indicates the presence of bond-dependent coupling in the spin Hamiltonian. As a result, we further show theoretically that the presence of anisotropic bond-dependent interactions can change the universality class of QPT for B ∥ a and B ⊥ ⁢a.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Transcritical diffuse-interface hydrodynamics of propellants in high-pressure combustors of chemical propulsion systems

Rocket engines and high-power new generations of gas-turbine jet engines and diesel engines oftentimes involve the injection of one or more reactants at subcritical temperatures into combustor environments at high pressures, and more particularly at pressures higher than those corresponding to the critical points of the individual components of the mixture, which typically range from 13 to 50 bars for most propellants. This class of trajectories in the thermodynamic space has been traditionally referred to as transcritical. However, the fundamental understanding of fuel atomization, vaporization, mixing, and combustion processes at such high pressures remains elusive. In particular, whereas fuel sprays are relatively well characterized at normal pressures, analyses of dispersion of fuel in high-pressure combustors are hindered by the limited experimental diagnostics and theoretical formulations available. The description of the thermodynamics of hydrocarbon-fueled mixtures employed in chemical propulsion systems is complex and involves mixing-induced phenomena, including an elevation of the critical point whereby the coexistence region of the mixture extends up to pressures much larger than the critical pressures of the individual components. As a result, interfaces subject to surface-tension forces may persist in multicomponent systems despite the high pressures, and may give rise to unexpected spray-like atomization dynamics that are otherwise absent in monocomponent systems above their critical point. In this article, the current understanding of this phenomenon is reviewed within the context of propulsion systems fueled by heavy hydrocarbons. Emphasis is made on analytical descriptions at mesoscopic scales of interest for computational fluid dynamics. In particular, a set of modifications of the constitutive laws in the Navier–Stokes equations for multicomponent flows, supplemented with a high-pressure equation of state and appropriate redefinitions of the thermodynamic potentials, are introduced in this work based on an extended version of the diffuse-interface theory of van der Waals. The resulting formulation involves revisited forms of the stress tensor and transport fluxes of heat and species, and enables a description of the mesoscopic volumetric effects induced by transcritical interfaces consistently with the thermodynamic phase diagram of the mixture at high pressures. Additionally, applications of the theory are illustrated in canonical problems, including dodecane/nitrogen transcritical interfaces in non-isothermal systems. The results indicate that a transcritical interface is formed between the propellant streams that persists downstream of the injection orifice over distances of the same order as the characteristic thermal-entrance length of the fuel stream. The transcritical interface vanishes at an edge that gives rise to a fully supercritical mixing layer.

02 PETROLEUM↗
DOE OSTI2020

Superconductivity and quantum criticality linked by the Hall effect in a strange metal

Many unconventional superconductors exhibit a common set of anomalous charge transport properties that characterize them as ‘strange metals’, which provides hope that there is a single theory that describes them1–3. However, model-independent connections between the strange metals and superconductivity have remained elusive. Here, we show that the Hall effect of the unconventional superconductor BaFe 2 (As 1-x P x ) 2 contains an anomalous contribution arising from the correlations within the strange metal. This term has a distinctive dependence on the magnetic field, which allows us to track its behaviour across the doping–temperature phase diagram, even under the superconducting dome. These measurements demonstrate that the strange metal Hall component emanates from a quantum critical point and, in the zero-temperature limit, decays together with the superconducting critical temperature. Overall, this empirically reveals the structure of the connection between superconductivity and quantum criticality, which may be common to the physics of many strange metal superconductors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Thermodynamic modeling of the Nb-Ni system with uncertainty quantification using PyCalphad and ESPEI

Here, the Nb–Ni system is remodeled with uncertainty quantification (UQ) using software tools of PyCalphad and ESPEI (the Extensible, Self-optimizing Phase Equilibria Infrastructure) with the presently implemented capability of modeling site fraction based on Wyckoff positions. The five- and three-sublattice models are used to model the topologically close pack (TCP) μ-Nb 7 Ni 6 and δ-NbNi 3 phases according to their Wyckoff positions. The inputs for CALPHAD-based thermodynamic modeling include the thermochemical data as a function of temperature predicted by first-principles and phonon calculations based on density functional theory (DFT), ab initio molecular dynamics (AIMD) simulations, together with phase equilibrium and site fraction data in the literature. In addition to phase diagram and thermodynamic properties, the CALPHAD-based predictions of site fractions of Nb in μ-Nb 7 Ni 6 agree well with experimental data. Furthermore, the UQ estimation using the Markov Chain Monte Carlo (MCMC) method as implemented in ESPEI is applied to study the uncertainty of site fraction in μ-Nb 7 Ni 6 and enthalpy of mixing (ΔH mix ) in liquid.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Investigation of porous polydimethylsiloxane structures with tunable properties induced by the phase separation technique

This article reports the fabrication and characterization of porous polydimethylsiloxane (PDMS) structures developed by the solvent evaporationinduced phase separation technique. Here, ternary systems containing water/ tetrahydrofuran (THF)/PDMS with various concentrations are produced to form a stable solution. The porous PDMS structures are formed by removing the solvent (THF) and nonsolvent (water) phases during the stepping heat treatment procedure. The analytical ternary phase diagram is constructed based on the thermodynamic equilibrium state in the polymer solution to explain the stable/unstable formulations and the possible composition change path. The results show that the isolated pores with the adjustable pore size ranging from 330 to 1900 μm are obtained by tuning the water to the THF ratio. The mechanical properties of the porous PDMS structures are determined by conducting the tensile tests on the prepared dog bone-shaped specimens. A wide range of elastic modulus ranging between 0.49 and 1.05 MPa was achieved without affecting the density of the porous sample by adjusting the solvent and non-solvent content in the solution. It is shown that the flexibility of the porous structures can be improved by reducing the ratio of water to THF and decreasing the PDMS content. The porosity measurements reveal that the PDMS concentration is the major phase controlling the porosity of the structure, while the effect of water/THF is negligible.

42 ENGINEERING↗
DOE OSTI2022

Transport coefficients of the quark-gluon plasma at the critical point and across the first-order line

A bottom-up Einstein-Maxwell-dilaton holographic model is used to compute, for the first time, the behavior of several transport coefficients of the hot and baryon-rich strongly coupled quark-gluon plasma at the critical point and also across the first-order phase transition line in the phase diagram. The observables under study are the shear and bulk viscosities, the baryon and thermal conductivities, the baryon diffusion, the jet quenching parameter $\hat{q}$, as well as the heavy-quark drag force and the Langevin diffusion coefficients. These calculations provide a phenomenologically promising estimate for these coefficients, given that our model quantitatively reproduces lattice QCD thermodynamics results, both at zero and finite baryon density, besides naturally incorporating the nearly perfect fluidity of the quark-gluon plasma. Here we find that the diffusion of baryon charge, and also the shear and bulk viscosities, are suppressed with increasing baryon density, indicating that the medium becomes even closer to perfect fluidity at large densities. On the other hand, the jet quenching parameter and the heavy-quark momentum diffusion are enhanced with increasing density. The observables display a discontinuity gap when crossing the first-order phase transition line, while developing an infinite slope at the critical point. The transition temperatures associated with different transport coefficients differ in the crossover region but are found to converge at the critical point.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Extreme Metastability of Diamond and its Transformation to the BC8 Post-Diamond Phase of Carbon

Diamond possesses exceptional physical properties due to its remarkably strong carbon–carbon bonding, leading to significant resilience to structural transformations at very high pressures and temperatures. Despite several experimental attempts, synthesis and recovery of the theoretically predicted post-diamond BC8 phase remains elusive. Through quantum-accurate multimillion atom molecular dynamics (MD) simulations, we have uncovered the extreme metastability of diamond at very high pressures, significantly exceeding its range of thermodynamic stability. We predict the post-diamond BC8 phase to be experimentally accessible only within a narrow high pressure–temperature region of the carbon phase diagram. The diamond to BC8 transformation proceeds through premelting followed by BC8 nucleation and growth in the metastable carbon liquid. Here we propose a double-shock compression pathway for BC8 synthesis, which is currently being explored in experiments at the National Ignition Facility.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Speed of Sound and Baryon Cumulants in Heavy-Ion Collisions

We present a method that may allow an estimate of the value of the speed of sound as well as its logarithmic derivative with respect to the baryon number density in matter created in heavy-ion collisions. To this end, we utilize well-known observables: cumulants of the baryon number distribution. In analyses aimed at uncovering the phase diagram of strongly interacting matter, cumulants gather considerable attention as their qualitative behaviour along the explored range of collision energies is expected to aid in detecting the QCD critical point. We show that the cumulants may also reveal the behavior of the speed of sound in the temperature and baryon chemical potential plane. We demonstrate the applicability of such estimates within two models of nuclear matter, and explore what might be understood from known experimental data.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2026

Plutonium migration and phase evolution in irradiated U-Pu-Zr metallic fuels: An integrated EPMA-SEM-TEM study

Constituent redistribution is a defining feature of irradiated U-Pu-Zr metallic fuels, yet its mechanisms and effects on fuel performance are not sufficiently resolved to guide model development. Although decades of irradiation testing have established broad trends, a true mechanistic understanding of constituent redistribution has not been achieved. Here, in this study, we use electron probe microanalysis (EPMA), scanning electron microscopy (SEM), and transmission electron microscopy-based (TEM) selective area electron diffraction (SAED) on a EBR-II irradiated U-19 wt.% Pu-6 wt.% Zr fuel pin cross-section to correlate the composition, porosity, and crystallographic phases formed after irradiation. Constituent redistribution is thought to consist of three distinct zones, in which uranium and zirconium migrate while plutonium remains relatively unchanged. Our EPMA results resolve eight distinct compositional regions, and more importantly, show that plutonium redistributes alongside zirconium, contrary to historical assumptions. The distribution of fission products was highly asymmetric with a few large lanthanide precipitates observed at isolated sites on the pin periphery instead of a uniform distribution of smaller precipitates around the periphery. Using thermodynamic data from TAF-ID and the measured EPMA compositions, matrix phase fractions were predicted across the fuel radius. Phase predictions based on composition did not match TEM/SAED results, which revealed a much higher fraction of α−U phase than would be expected if phases were retained from reactor temperatures. These findings highlight the need for expanded SAED phase identification to capture post-irradiation and storage effects, as well as rigorous uncertainty quantification in fuel performance and phase diagram modeling to better constrain predictions from compositional data.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

High-electric-field behavior of the metal-insulator transition in TiS3 nanowire transistors

We investigate the behavior of the metal-insulator transition (MIT) in TiS 3 nanowire field-effect transistors, in the strongly nonequilibrium limit that has, thus far, largely been neglected. Under high electric fields within the TiS 3 channel (≤115 kV/cm), we observe the emergence of a critical fixed point, separating insulating and metallic regions in the transfer curves of the device. The critical gate voltage that defines this fixed point evolves systematically with the drain bias (field), allowing us to map out a phase diagram that identifies the conditions for metallicity or for insulating behavior. Dependent upon the choice of the gate voltage used to tune the carrier concentration in the nanowire, the existence of the field-induced MIT allows the TiS 3 to be either insulating or metallic over an extensive range of temperature. The possible connection of this strongly nonequilibrium state to some form of charge density wave is discussed.

2D materials↗
DOE OSTI2022

Visualizing the out-of-plane electronic dispersions in an intercalated transition metal dichalcogenide

Layered transition metal dichalcogenides have a rich phase diagram and they feature two-dimensionality in numerous physical properties. Co 1/3 NbS 2 is one of the newest members of this family where Co atoms are intercalated into the van der Waals gaps between NbS 2 layers. Here, we study the three-dimensional electronic band structure of Co 1/3 NbS 2 using both surface and bulk sensitive angle-resolved photoemission spectroscopy. We show that the electronic bands do not fit into the rigid band shift picture after the Co intercalation. Instead, Co 1/3 NbS 2 displays a different orbital character near the Fermi level compared to the pristine NbS 2 compound and has a clear band dispersion in the k z direction despite its layered structure. Our photoemission study demonstrates the out-of-plane electronic correlations introduced by the Co intercalation, thus offering a different perspective on this compound. Finally, we propose how Fermi level tuning could lead to exotic phases such as spin density wave instability.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Quasicrystal stability and nucleation kinetics from density functional theory

The aperiodic order of quasicrystals bridges the amorphous and crystalline regime, so it has remained unclear whether quasicrystals are metastable or stable phases of matter. Density functional theory is often used to evaluate thermodynamic stability, but quasicrystals are long-range aperiodic and their energies cannot be calculated using conventional ab initio methods. Here, in this work, we perform first-principles calculations on quasicrystal nanoparticles of increasing size, from which we can directly extrapolate their bulk and surface energies. Using this technique, we determine with high confidence that the icosahedral quasicrystals ScZn 7.33 and YbCd 5.7 are ground-state phases, thus revealing that translational symmetry is not a necessary condition for the zero-temperature stability of inorganic solids. Although we found the ScZn 7.33 quasicrystal to be thermodynamically stable, we show on a mixed thermodynamic and kinetic phase diagram that its solidification from the melt is limited by nucleation, which illustrates why even stable materials may be kinetically challenging to grow. Our techniques broadly open the door to first-principles investigations into the structure–bonding–stability relationships of aperiodic materials.

density functional theory↗
DOE OSTI2024

Dynamical Correlations and Order in Magic-Angle Twisted Bilayer Graphene

The interplay of dynamical correlations and electronic ordering is pivotal in shaping phase diagrams of correlated quantum materials. In magic-angle twisted bilayer graphene, transport, thermodynamic, and spectroscopic experiments pinpoint a competition between distinct low-energy states with and without electronic order, as well as between localized and delocalized charge carriers. In this study, we utilize dynamical mean-field theory on the topological heavy fermion model of twisted bilayer graphene to investigate the emergence of electronic correlations and long-range order in the absence of strain. We contrast moment formation, Kondo screening, and ordering on a temperature basis and explain the nature of emergent correlated states based on three central phenomena: (i) the formation of local spin and valley isospin moments around 100 K, (ii) the ordering of the local isospin moments around 10 K preempting Kondo screening, and (iii) a cascadic redistribution of charge between localized and delocalized electronic states upon doping. At integer fillings, we find that low-energy spectral weight is depleted in the symmetric phase, while we find insulating states with gaps enhanced by exchange coupling in the zero-strain ordered phases. Doping away from integer filling results in distinct metallic states: a “bad metal” above the ordering temperature, where scattering off the disordered local moments suppresses electronic coherence, and a “good metal” in the ordered states with coherence of quasiparticles facilitated by isospin order. This finding reveals coherence from order as the microscopic mechanism behind the Pomeranchuk effect observed experimentally by Rozen [] and by Saito []. Upon doping, there is a periodic charge reshuffling between localized and delocalized electronic orbitals leading to cascades of doping-induced Lifshitz transitions, local spectral weight redistributions, and periodic variations of the electronic compressibility ranging from nearly incompressible to negative. Our findings highlight the essential role of charge transfer, hybridization, and ordering in shaping the electronic excitations and thermodynamic properties in twisted bilayer graphene and provide a unified understanding of the most puzzling aspects of scanning tunneling spectroscopy, transport, and compressibility experiments. Published by the American Physical Society 2024

Physics↗
DOE OSTI2023

Mott insulators in moiré transition metal dichalcogenides at fractional fillings: Slave-rotor mean-field theory

In this study, we study a slave-rotor mean-field theory of an extended Hubbard model, applicable to transition metal dichalcogenide moiré systems, that captures both the formation of Wigner crystals as well as exotic spin states on top of these charge backgrounds. Phase diagrams are mapped out for different choices of long-range Coulomb repulsion strength, reproducing several experimentally found Wigner crystal states. Assuming unbroken time-reversal symmetry, we find several spin-liquid states as well as dimer states at fractional fillings. While spin dimer states are always found to have the lowest mean-field energy, several spin-liquid states are energetically competitive and may be stabilized by including gauge fluctuations or further interaction terms. We further discuss possible experimental signatures of these states pertinent to two-dimensional moiré heterostructures.

Charge order↗
DOE OSTI2026

Planar Systems for Quantum Information

This project aims to develop two‐dimensional (2D) moiré materials as a quantum simulator to implement model Hamiltonians and their phase diagrams. Progress in quantum information science (QIS) requires the development of advanced quantum materials systems. The rich family of layered van der Waals materials and their heterostructures present opportunities to create previously unrealized types of applications for QIS. Specifically, when two layers of van der Waals materials are overlaid with a small twist angle or/and lattice mismatch, a moiré superlattice with a period of about ten nanometers is formed. This provides a periodic trapping potential for electrons. Electrons can tunnel between the traps and repel each other by their mutual Coulomb interactions. The platform of 2D moiré materials provides many attractive features, including tunability of length and energy scales, charge density, and even lattice symmetry. It presents new possibilities for realizing quantum simulation of the many-body physics in a solid-state platform. This integrated team of six investigators seeks to develop relevant theoretical treatments to link ab-initio studies of 2D moiré materials to model Hamiltonians and to evaluate correlated phases predicted by these model Hamiltonians in the relevant regimes. On the experimental side, the team aims to develop methods to realize a homogeneous and highly controlled potential landscape for the electrons and to initiate, protect, and measure their quantum many-body states.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Fluctuations and correlations of baryonic chiral partners

The exploration of critical phenomena in phase transitions of strongly interacting matter governed by quantum chromodynamics (QCD) is one of the goals of present ultrarelativistic heavy-ion collision experiments at BNL and CERN. The key research direction is to locate the putative critical point on the phase diagram of QCD linked to the chiral symmetry restoration at finite temperature and/or density. One of the main theoretical tools used for this purpose is the fluctuations of conserved charges, such as the net-baryon number. However, due to experimental limitations, analyses of heavy-ion collision data suffer from a very doubtful basing of the net-proton number being a proxy for the total net-baryon number fluctuations. In this work, we use the parity doublet model to investigate the fluctuations of the net-baryon number density in hot and dense hadronic matter. The model accounts for chiral criticality within the mean-field approximation. We focus on the qualitative properties and systematics of the first- and second-order susceptibility of the net-baryon number density, and their ratios for nucleons of positive and negative parity, as well as their correlator. We show that the fluctuations of the positive-parity nucleon do not necessarily reflect the fluctuations of the total net-baryon number density at the phase boundary of the chiral phase transition. We also investigate the nontrivial structure of the correlator. Furthermore, we discuss and quantify the differences between the fluctuations of the net-baryon number density in the vicinity of the chiral and liquid-gas phase transition in nuclear matter. We indicate a possible relevance of our results with the interpretation of the experimental data on net-proton number fluctuations in heavy-ion collisions. Published by the American Physical Society 2024

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

CALPHAD-based Bayesian optimization to accelerate alloy discovery for high-temperature applications

Two crucial properties influencing the performance of high-temperature alloys are coefficient of thermal expansion (CTE) and phase constitution. It is desirable to have alloys with low CTE, which reduces CTE mismatch with the surface oxide and the likelihood of oxide spallation. Reducing the amount of brittle intermetallic phases such as Sigma (σ) enhances alloy ductility and processability. Here, we propose a multi-objective Bayesian Optimization (BO) model to simultaneously minimize CTE (at an operational temperature of 1150 °C) and T σ (temperature when the Sigma phase completely dissolves in the metal matrix), properties which are obtained from high-throughput CALculation of PHAse Diagrams (CALPHAD). The model successfully identifies several alloys with CTE ≤ 2 × 10 –5 /K and T σ ≤ 500 °C by exploring just 7% of the nickel–chromium–cobalt–aluminum–iron (Ni–Cr–Co–Al–Fe) composition space. Such multi-objective alloy design frameworks can be used to inform additive manufacturing experiments and accelerate alloy discovery for high-temperature energy applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Pressure-Induced Phase Transitions in Bilayer La 3 Ni 2 O 7

La 3 Ni 2 O 7 differs from expectations in part because at ambient pressure, it exists in two polymorphs: an unconventional crystal structure with alternating layers of single- and triple-layered nickel−oxygen octahedra (i.e., La 2 NiO 4 plus La 4 Ni 3 O 10 , with the so-called 1313 crystal structure) and a classical double-layer Ruddlesden−Popper phase (i.e., La 3 Ni 2 O 7 , with the so-called 2222 crystal structure, which dominates at high pressure). In this study, we report the pressure-dependent structural and electrical resistive properties of single crystals of the classical double-layered La 3 Ni 2 O 7 , grown at slightly elevated pressure using the floating-zone method. Structural characterization under pressures up to 15.4 GPa reveals a gradual transition from orthorhombic to tetragonal symmetry that is completed at 12−14 GPa. Additionally, we present pressure and field-dependent electrical resistance measurements up to 27.4 GPa, from which we construct a phase diagram. Although a resistive transition at 80 K is observed at high pressures, the resistive hallmarks of superconductivity are not.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗