Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Optical properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Study of the composition, structure, and optical properties of a-Si{sub 1-x}C{sub x}:H Left-Pointing-Angle-Bracket Er Right-Pointing-Angle-Bracket films erbium doped from the Er(pd){sub 3} complex compound

Rutherford backscattering, IR spectroscopy, ellipsometry, and atomic-force microscopy are used to perform an integrated study of the composition, structure and optical properties of a-Si{sub 1-x}C{sub x}:H Left-Pointing-Angle-Bracket Er Right-Pointing-Angle-Bracket amorphous films. The technique employed to obtain the a-Si{sub 1-x}C{sub x}:H Left-Pointing-Angle-Bracket Er Right-Pointing-Angle-Bracket amorphous films includes the high-frequency decomposition of a mixture of gases, (SiH{sub 4}){sub a} + (CH{sub 4}){sub b}, and the simultaneous thermal evaporation of a complex compound, Er(pd){sub 3}. It is demonstrated that raising the amount of CH{sub 4} in the gas mixture results in an increase in the carbon content of the films under study and an increase in the optical gap E{sub g}{sup opt} from 1.75 to 2.2 eV. Changes in the composition of a-Si{sub 1-x}C{sub x}:H Left-Pointing-Angle-Bracket Er Right-Pointing-Angle-Bracket amorphous films, accompanied, in turn, by changes in the optical constants, are observed in the IR spectra. The ellipsometric spectra obtained are analyzed in terms of multiple-parameter models. The conclusion is made on the basis of this analysis that the experimental and calculated spectra coincide well when variation in the composition of the amorphous films with that of the gas mixture is taken into account. The existence of a thin (6-8 nm) silicon-oxide layer on the surface of the films under study and the validity of using the double-layer model in ellipsometric calculations is confirmed by the results of structural analyses by atomic-force microscopy.

36 MATERIALS SCIENCE↗

Structural, Electrical and Optical Properties of Gallium Doped Zinc Oxide Thin Films Prepared by Electron Beam Evaporation Technique

High quality gallium doped zinc oxide (GZO) films are prepared by electron beam evaporation technique. The effect of substrate temperature on structural, electrical and optical properties was studied in detail. The prepared films are polycrystalline in nature with c-axis perpendicular to the substrate. The resistivity of the film decreases and the optical transparency increases as the substrate temperature increases from room temperature to 150 deg. C. The film produce the optical band gap of 3.47 eV.

36 MATERIALS SCIENCE↗

Use of Variable Angle Spectroscopic Ellipsometry in Order to Determine Contaminant Optical Properties

In order to measure contaminant levels found in the manufacture of the Redesigned Solid Rocket Motor (RSRM), optical properties of the contaminants are needed to develop standards for calibration purposes. Specific to our efforts is the determination of the complex index of refraction for a hydrocarbon mixture and a commercial methyl siloxane. Using ellipsometric measurements with multiple angles of incident and a range of wavelengths in the near infrared a determination of the index of refraction and the extinction coefficient were made for the contaminants. This paper will present the optical techniques and modeling approach used to determine these optical constants of the hydrocarbon mixture and the methyl siloxane studied.

Hughes, C.↗

Study of structural and optical properties of Fe doped CuO nanoparticles

Iron doped Copper oxide nanoparticles were synthesized by the co-precipitation method at different concentration (3%, 6%, 9%) at 300-400° C with Copper Acetate and Ferric Chloride as precursors in presence of Polyethylene Glycol and Sodium Hydroxide as stabilizing agent. Effect of doping on the structural and optical properties is studied. The obtained nanoparticles were characterized by X-Ray Diffraction and UV-Visible Spectroscopy for examining the size and the band gap respectively. The X-Ray Diffraction plots confirmed the monoclinic structure of Copper oxide suggesting the Cu atoms replaced by Fe atoms and no secondary phase was detected. The indirect band gap of Fe doped CuO nanoparticles is 2.4eV and increases to 3.4eV as the concentration of dopant increases. The majority of particle size is in range 8 nm to 35.55 nm investigated by X-ray diffractometer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of lattice strain on structural and optical properties of ZnO nanorods grown by hydrothermal method

In this work, we have synthesized ZnO nanorods over ZnO seeds/ITO/glass substrate by the facile hydrothermal method. ZnO seeds are grown at different temperatures ranging from 150°C to 550°C in steps of 100°C. We have studied the effect of strain on the structural and optical properties of ZnO nanorods. It was observed that the growth temperature of seed layer has an influence over the lattice strain present in the nanorods. The as synthesized nanorods were characterized by scanning electron microscope (SEM), x-ray diffraction (XRD) and photoluminescence (PL). SEM images confirm the formation of dense arrays of vertically aligned nanorods on seeds which are grown at 350°C. In addition to this, XRD patterns reveal that these ZnO nanorods are preferentially oriented along (002) direction. The strain analysis based on the XRD results reveals that the minimum value of strain is obtained at 350°C which is attributed to the improved crystalline quality of the interface of seed layer and nanorods leading to their c-axis alignment and enhancement of ultraviolet emission as observed in the PL spectra.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of cobalt doping on structural and optical properties of ZnO nanoparticles

Cobalt doped ZnO nanoparticles of uniform sizes were prepared by a chemical method using ZnCl{sub 2} and NaOH as the source materials. The formation of Co-doped ZnO nanoparticles was confirmed by transmission electron microscopy (TEM), high resolution TEM (HR-TEM) and selected area electron diffraction (SAED) studies. The optical properties of obtained products were examined using room temperature UV-visible and FTIR spectroscopy. SAED of cobalt doped ZnO nanoparticles shows homogeneous distribution of nanoparticles with hexagonal structure. The HRTEM image of the Co-doped ZnO nanoparticles reveals a clear lattice spacing of 0.52 nm corresponding to the interplanar spacing of wurtzite ZnO (002) plane. The absorption band at 857 cm{sup −1} in FTIR spectra confirmed the tetrahedral coordination of Zn and a shift of absorption peak to shorter wavelength region and decrease in absorbance with Co doping.is observed in UV-Visible spectra.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structural and optical properties of Bi{sub 4}Mg{sub 0.05}V{sub 1.95}O{sub 11−δ} synthesized via melt quench technique

Bi{sub 4}Mg{sub 0.05}V{sub 1.95}O{sub 11−δ} has been synthesized by melt quench technique followed by sintering. The X- ray diffraction pattern confirmed the γ - phase stabilization at room temperature with tetragonal crystal structure. These samples are also investigated by FT-IR and UV/vis spectroscopy to establish the relationship between structural and optical properties.

36 MATERIALS SCIENCE↗

α-Quartz Phase Stabilization, Surface Texturing, and Tunable Optical Properties of Nanocrystalline GeO 2 Films Made by Pulsed-Laser Deposition: Implications for Optical and Optoelectronic Applications

Germanium oxide (GeO 2 ) has great potential in multifunctional devices and next-generation power electronics due to its high thermal conductivity and ambipolar doping capability. However, the complexity of synthesizing the desirable polymorph with a controlled phase, surface/interface quality, microstructure, and functional properties is the main barrier to GeO 2 utilization in advanced applications. Here, in this regard, we present a method to realize the hexagonal (h) or a-quartz type GeO 2 with nano-textured surface morphology on sapphire substrates using a hybrid synthesis strategy that comprises pulsed laser deposition (PLD) and post-deposition thermal annealing. We performed a comprehensive study to investigate the effect of annealing temperature, which was varied in a wide range (600-1100 °C), on the crystal structure, phase, surface morphology, chemical stoichiometry, defect states, and optical properties of PLD-grown GeO 2 films. As-deposited GeO 2 films at 500 °C were amorphous. Upon annealing, the GeO 2 films induced an amorphous-to-crystalline phase transformation; GeO 2 films annealed at higher annealing temperatures (≥900 °C) stabilized in the hexagonal phase and demonstrated excellent crystal quality and chemical stability. Thermally activated growth process showed increased average crystallite size, which was varied in the range of 20-130 (±2) nm, while the surface roughness followed a similar trend. The spectral transmittance and band gap also increased with increasing annealing temperature. The resulting h-GeO 2 films, particularly those obtained at annealing temperatures in the 900-1100 °C range, had a higher band gap of 6.2-6.3 eV and displayed excellent optical transmittance in the visible region. Moreover, the absence of extended valence band maxima and reduced optical defect density support the quality improvement upon annealing. When considering phase-pure bulk and nanostructured GeO 2 as a possible candidate for ultra wide band gap semiconductors in cutting-edge technological applications, the results of the current work can be beneficial to realize high structural and optical quality a-quartz structured GeO 2 films.

GeO2↗

Enhanced optical properties due to indium incorporation in zinc oxide nanowires

Indium-doped zinc oxide nanowires grown by vapor-liquid-solid technique with 1.6 at. % indium content show intense room temperature photoluminescence (PL) that is red shifted to 20 meV from band edge. We report on a combination of nanowires and nanobelts-like structures with enhanced optical properties after indium doping. The near band edge emission shift gives an estimate for the carrier density as high as 5.5 × 10{sup 19 }cm{sup −3} for doped nanowires according to Mott's critical density theory. Quenching of the visible green peak is seen for doped nanostructures indicating lesser oxygen vacancies and improved quality. PL and transmission electron microscopy measurements confirm indium doping into the ZnO lattice, whereas temperature dependent PL data give an estimation of the donor and acceptor binding energies that agrees well with indium doped nanowires. This provides a non-destructive technique to estimate doping for 1D structures as compared to the traditional FET approach. Furthermore, these indium doped nanowires can be a potential candidate for transparent conducting oxides applications and spintronic devices with controlled growth mechanism.

36 MATERIALS SCIENCE↗

Scintillation, dosimeter and optical properties of MgF2 transparent ceramics doped with Gd3+

Highlights: • We have developed MgF{sub 2}:Gd{sup 3+} transparent ceramics by SPS. • The samples showed luminescence due to the 4f-4f transitions of Gd{sup 3+}. • The 1% Gd-doped sample has high TSL sensitivity equivalent to commercial personal dosimeters. - Abstract: In this study, we have developed MgF{sub 2}:Gd transparent ceramics by spark plasma sintering (SPS) and evaluated the scintillation, dosimeter and optical properties. All the sample were successfully synthesized in a transparent form with relative densities over 99% to that of the single crystal. The samples were confirmed to show scintillation, thermally-stimulated luminescence (TSL) and optically-stimulated luminescence (OSL). The origin of these emissions was due to the 4f-4f transitions of Gd{sup 3+} appearing as a single peak at 310 nm. In particular, the TSL was very sensitive to X-rays, and especially the 1% Gd-doped sample showed a sensitivity as low as 0.1 mGy. The TSL response increases monotonically with the irradiation dose, and the dynamic range was confirmed to be over 0.1–1000 mGy, which was equivalent sensitivity to that of commercial personal dosimeters.

61 RADIATION PROTECTION AND DOSIMETRY↗

Optical properties of tin oxide nanoparticles prepared by laser ablation in water: Influence of laser ablation time duration and laser fluence

Colloidal tin oxide nanoparticles are prepared by laser (having a wavelength of 1064 nm) ablation of tin metallic target immersed in pure deionized water. The influences of laser ablation time and laser fluence on the size and optical properties of the synthesized nanoparticles are studied. Prepared tin oxide nanoparticles are characterized by transmission electron microscope, selected area electron diffraction and UV-Visible absorption spectroscopy. The morphology of prepared tin oxide nanoparticles is found to be mostly spherical and with sizes in the nanometric range (mean radius of 3.2 to 7.3 nm). The measured UV-Visible absorption spectra show the presence of absorption peaks in the ultraviolet region. The band gap energy of samples prepared with different laser ablation time duration is calculated and is found to be increased with decrease in size (radius) of the prepared nanoparticles. Photoluminescence emission measurements at room temperature show that all the samples exhibit photoluminescence in the visible region. The peak photoluminescence emission intensity in the sample prepared with 50 min of laser ablation time is 3.5 times larger than that obtained in the sample prepared with 10 min of laser ablation time. - Highlights: Black-Right-Pointing-Pointer SnO{sub 2} nanoparticles (6.4-14.6 nm) are prepared by laser ablation in liquid technique. Black-Right-Pointing-Pointer The influences of laser ablation time and laser fluence are studied. Black-Right-Pointing-Pointer Samples are characterized by TEM and UV-Visible absorption spectroscopy. Black-Right-Pointing-Pointer UV-Visible absorption spectra exhibit quantum confinement effect. Black-Right-Pointing-Pointer Samples exhibit enhanced photoluminescence emissions in the visible region.

36 MATERIALS SCIENCE↗

Annealing-induced evolution of optical properties of the multilayered nanoperiodic SiO{sub x}/ZrO{sub 2} system containing Si nanoclusters

The photoluminescence, infrared absorption, and Raman spectra of amorphous multilayered nanoperiodic a-SiO{sub x}/ZrO{sub 2} structures produced by vacuum evaporation and then annealed at different temperatures (500-1100 Degree-Sign C) are studied. It is established that the evolution of the optical properties with increasing annealing temperature is controlled by sequential transformation of Si clusters formed in the SiO{sub x} layers from nonphase inclusions to amorphous clusters and then to nanocrystals. The finally formed nanocrystals are limited in sizes by the thickness of the initial SiO{sub x} layers and by chemical reactions with ZrO{sub 2}.

36 MATERIALS SCIENCE↗

Quantum-size effect on the electronic and optical properties of hybrid TiO{sub 2}/Au clusters

Although TiO{sub 2}/Au nanosystems exhibit high photocatalytic activities under solar radiation in the experiment, the quantum-size effect of TiO{sub 2} on the growth, electronic properties, and reactivity of Au clusters remains elusive. Using (time dependent) density functional theory, it is found that Au atoms attach to low-coordinated Ti and O atoms and serve as seeds for the growth of Au clusters, and the electronic (optical) properties of hybrid Au-TiO{sub 2} nano-clusters depend strongly upon the type of supported Au clusters. Interestingly, decorating TiO{sub 2} nano-particles with even-numbered Au clusters (Au{sub 8} or Au{sub 10}) can enhance the photocatalytic activity by: (i) spatially separating electron and hole states and (ii) balancing redox strength and visible light absorption. Furthermore, the interactions between the Au-TiO{sub 2} clusters and a single water molecule have been studied. It will open up new avenues for exploring controlled photocatalysts in semiconductor-based quantum-confined systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural and optical properties of Sn{sub 1−x}Fe{sub x}O{sub 2} thin films prepared by flash evaporation technique

Sn{sub 1−x}Fe{sub X}O{sub 2} (x = 0, 0.05) thin films were prepared on glass substrate using the flash evaporation technique. The samples were annealed at 773 K for 2 hrs in air atmosphere. A systematic study was carried out on the structural and optical properties of the as deposited and annealed thin films. From the X-ray diffraction analysis it was found that the Sn{sub 1−x}Fe{sub X}O{sub 2} films deposited at 623 K were amorphous in nature and the Sn{sub 1−x}Fe{sub X}O{sub 2} films annealed at 773 K exhibited the tetragonal structure of the SnO{sub 2}. The optical band gap of the SnO{sub 2} thin films was found to be as 3.17 eV whereas the optical band gap of the Sn{sub 1−x}Fe{sub X}O{sub 2} films was found to be as 3.01 eV after air annealing.

36 MATERIALS SCIENCE↗

Rest-frame optical properties of luminous 1.5 < Z < 3.5 quasars: The Hβ-[O iii] region

We study the rest-frame optical properties of 74 luminous (L{sub bol}=10{sup 46.2−48.2} erg s{sup −1}), 1.5<z<3.5 broad-line quasars with near-IR (JHK) slit spectroscopy. Systemic redshifts based on the peak of the [O iii] λ5007 line reveal that redshift estimates from the rest-frame UV broad emission lines (mostly Mg ii) are intrinsically uncertain by ∼200 km s{sup −1} (measurement errors accounted for). The overall full-width-at-half-maximum of the narrow [O iii] line is ∼1000 km s{sup −1} on average. A significant fraction of the total [O iii] flux (∼40%) is in a blueshifted wing component with a median velocity offset of ∼700 km s{sup −1}, indicative of ionized outflows within a few kpc from the nucleus; we do not find evidence of significant [O iii] flux beyond ∼10 kpc in our slit spectroscopy. The [O iii] line is noticeably more asymmetric and weaker than that in typical less luminous low-z quasars. However, when matched in quasar continuum luminosity, low-z quasars have similar [O iii] profiles and strengths as these high-z systems. Therefore the exceptionally large width and blueshifted wing, and the relatively weak strength of [O iii] in high-z luminous quasars are mostly a luminosity effect rather than redshift evolution. The Hβ-[O iii] region of these high-z quasars displays a similar spectral diversity and Eigenvector 1 correlations with anti-correlated [O iii] and optical Fe ii strengths, as seen in low-z quasars; but the average broad Hβ width is larger by 25% than typical low-z quasars, indicating more massive black holes in these high-z systems. These results highlight the importance of understanding [O iii] in the general context of quasar parameter space in order to understand quasar feedback in the form of [O iii] outflows. The calibrated one-dimensional near-IR spectra are made publicly available, along with a composite spectrum.

79 ASTRONOMY AND ASTROPHYSICS↗

Optical properties of VO{sub 2} films at the phase transition: Influence of substrate and electronic correlations

Thin films of VO{sub 2} on different substrates, Al{sub 2}O{sub 3} and SiO{sub 2}/Si, have been prepared and characterized from room temperature up to 360 K. From the band structure in the rutile metallic phase and in the monoclinic insulating phase, the optical properties are calculated and compared with reflection measurements performed as a function of temperatures. Various interband transitions can be assigned and compared with previous speculations. We extract the parameters of the metallic charge carriers that evolve upon crossing the insulator-to-metal phase transition and find effects by the substrate. The influence of electronic correlations becomes obvious at the phase transition.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Aggregation process of optical properties and temperature over heterogeneous surfaces in infrared domain

We propose a modeling of the aggregation processes of optical properties and temperature over the heterogeneous landscape in the infrared domain (3-14{mu}m). The main objectives of the modeling are to understand how these parameters aggregate and to study their links at different spatial scales. As the landscape is described at each scale by its radiative parameters, general equations linking the radiative parameters at a given high spatial scale to those at a rough scale are proposed. Then these equations are applied to several synthetic landscapes. An analysis based on a design of experiments is conducted to point out the influence of each of the input factors. The results show the importance of the intrinsic parameters (reflectance, emissivity, and surface temperature) of each surface element and also the directional and spectral behaviors of the aggregated parameters.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Retrieving Marine Inherent Optical Properties from Satellites Using Temperature and Salinity-dependent Backscattering by Seawater

Time-series of marine inherent optical properties (IOPs) from ocean color satellite instruments provide valuable data records for studying long-term time changes in ocean ecosystems. Semi-analytical algorithms (SAAs) provide a common method for estimating IOPs from radiometric measurements of the marine light field. Most SAAs assign constant spectral values for seawater absorption and backscattering, assume spectral shape functions of the remaining constituent absorption and scattering components (e.g., phytoplankton, non-algal particles, and colored dissolved organic matter), and retrieve the magnitudes of each remaining constituent required to match the spectral distribution of measured radiances. Here, we explore the use of temperature- and salinity-dependent values for seawater backscattering in lieu of the constant spectrum currently employed by most SAAs. Our results suggest that use of temperature- and salinity-dependent seawater spectra elevate the SAA-derived particle backscattering, reduce the non-algal particles plus colored dissolved organic matter absorption, and leave the derived absorption by phytoplankton unchanged.

Passive Remote Sensing↗