Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “OMIT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Novel porous graphene oxide and hydroxyapatite nanosheets-reinforced sodium alginate hybrid nanocomposites for medical applications

Graphene oxide (GO) and hydroxyapatite (HAp) are frequently used as reinforcements in polymers to improve mechanical and biological properties. In this work, novel porous hybrid nanocomposites consisting of GO, HAp, and sodium alginate (SA) have been prepared by facile solution mixing and freeze drying in an attempt to obtain a scaffold with desirable mechanical and biological properties. The as-prepared porous GO/HAp/SA hybrid nanocomposites were characterized by SEM, XRD, FTIR, TGA, and mechanical testing. In addition, preliminary cell behavior was assessed by CCK8 assay. It is found that the GO/HAp/SA nanocomposites show improved compressive strength and modulus over neat SA and HAp/SA nanocomposites. CCK8 results reveal that the GO/HAp/SA nanocomposites show enhanced cell proliferation over neat SA and GO/SA nanocomposite. It has been demonstrated that GO/HAp20/SA holds promise in bone tissue engineering. - Graphical abstract: Display Omitted - Highlights: • Graphene oxide (GO), hydroxyapatite (HAp), and alginate (SA) nanocomposites were fabricated. • The novel porous composites were prepared by solution mixture and freeze drying. • The GO/HAp/SA had porous structure with porosity > 85% and pore size > 150 μm. • The GO/HAp/SA exhibited improved mechanical properties over HAp/SA counterparts. • The GO/HAp/SA showed enhanced cell proliferation over GO/SA counterparts.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Hot deformation characterization of duplex low-density steel through 3D processing map development

The high temperature deformation behavior of duplex low-density Fe–18Mn–8Al–0.8C steel was investigated at temperatures in the range of 600–1000 °C. The primary constitutive analysis indicated that the Zener–Hollomon parameter, which represents the coupled effects of temperature and strain rate, significantly varies with the amount of deformation. Accordingly, the 3D processing maps were developed considering the effect of strain and were used to determine the safe and unsafe deformation conditions in association with the microstructural evolution. The deformation at efficiency domain I (900–1100 °C\10{sup −} {sup 2}–10{sup −} {sup 3} s{sup −} {sup 1}) was found to be safe at different strains due to the occurrence of dynamic recrystallization in austenite. The safe efficiency domain II (700–900 °C\1–10{sup −} {sup 1} s{sup −} {sup 1}), which appeared at logarithmic strain of 0.4, was characterized by deformation induced ferrite formation. Scanning electron microscopy revealed that the microband formation and crack initiation at ferrite\austenite interphases were the main causes of deformation instability at 600–800 °C\10{sup −} {sup 2}–10{sup −} {sup 3} s{sup −} {sup 1}. The degree of instability was found to decrease by increasing the strain due to the uniformity of microbanded structure obtained at higher strains. The shear band formation at 900–1100 °C\1–10{sup −} {sup 1} s{sup −} {sup 1} was verified by electron backscattered diffraction. The local dynamic recrystallization of austenite and the deformation induced ferrite formation were observed within shear-banded regions as the results of flow localization. - Graphical abstract: Display Omitted - Highlights: • The 3D processing map is developed for duplex low-density Fe–Mn–Al–C steel. • The efficiency domains shrink, expand or appear with increasing strain. • The occurrence of DRX and DIFF increases the power efficiency. • Crack initiation at α/γ interphase and shear banding lead to failure.

36 MATERIALS SCIENCE↗

The stress, surface spin and dipolar interaction in the diluted NiFe{sub 2}O{sub 4} nanoparticles by the SiO{sub 2} matrix: Characterization and analyses

Well-dispersed uniform NiFe{sub 2}O{sub 4} nanoparticles (NPs) with an average particle size of 15.4 nm were synthesized by thermal decomposition of a metal–organic salt, and then were diluted in a SiO{sub 2} matrix via a sol–gel method with different concentration. The magnetization (M) dependence of NiFe{sub 2}O{sub 4}/SiO{sub 2} on the temperature (T) and on the applied magnetic field (H) was systematically characterized by the Quantum Design superconducting quantum interference device (SQUID) PPMS system. The results of M ~ H/T divide the magnetic properties between 10 K and 300 K into two regions: the low temperature blocked-particle regime below the blocking temperature T{sub B} and the interacting superparamagnetic (ISP) regime above T{sub B}. In the ISP regime, all samples deviate from the ideal Langevin superparamagnetic behavior due to the effective anisotropy induced by the stress, surface spins and interparticle dipolar interaction. The Raman spectra indicate that the stress in all samples exhibits the vibration behavior, which leads to the effective anisotropy and hence coercivity vibration. - Graphical abstract: Display Omitted - Highlights: • Increase of NiFe{sub 2}O{sub 4} NPs' concentration elevates T{sub B} and broadens ZFC peak. • NiFe{sub 2}O{sub 4}/SiO{sub 2} samples do not exhibit the ideal superparamagnetism above T{sub B}. • Stress leads to the effective anisotropy and hence H{sub c} vibration. • Stress vibration was characterized in detail by the Raman spectra.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Formation of TiB{sub 2} by volume combustion and mechanochemical process

Titanium diboride was produced both by volume combustion synthesis (VCS) and by mechanochemical synthesis (MCP) through the reaction of TiO{sub 2}, B{sub 2}O{sub 3} and Mg. VCS products, expected to be composed of TiB{sub 2} and MgO, were found to contain also side products such as Mg{sub 2}TiO{sub 4}, Mg{sub 3}B{sub 2}O{sub 6}, MgB{sub 2} and TiN. HCl leaching was applied to the reaction products with the objective of removing MgO and the side products. Formation of TiN could be prevented by conducting the VCS under an argon atmosphere. Mg{sub 2}TiO{sub 4} did not form when 40% excess Mg was used. Wet ball milling of the products before leaching was found to be effective in removal of Mg{sub 3}B{sub 2}O{sub 6} during leaching in 1 M HCl. When stoichiometric starting mixtures were used, all of the side products could be removed after wet ball milling in ethanol and leaching in 5 M HCl when pure TiB{sub 2} was obtained with a molar yield of 30%. Pure TiB{sub 2} could also be obtained at a molar yield of 45.6% by hot leaching of VCS products at 75 deg. C in 5 M HCl, omitting the wet ball milling step. By MCP, products containing only TiB{sub 2} and MgO were obtained after 15 h of ball milling. Leaching in 0.5 M HCl for 3 min was found to be sufficient for elimination of MgO. Molar yield of TiB{sub 2} was 89.6%, much higher than that of VCS. According to scanning electron microscope analyses, the TiB{sub 2} produced had average grain size of 0.27 {+-} 0.08 {mu}m.

36 MATERIALS SCIENCE↗

Preparation of cobalt-zinc ferrite (Co{sub 0.8}Zn{sub 0.2}Fe{sub 2}O{sub 4}) nanopowder via combustion method and investigation of its magnetic properties

Research highlights: {yields} Cobalt-zinc ferrite was prepared by combustion method. {yields} Properties of the sample were characterized by several techniques. {yields} Curie temperature was determined to be 350 {sup o}C. -- Abstract: Cobalt-zinc ferrite (Co{sub 0.8}Zn{sub 0.2}Fe{sub 2}O{sub 4}) was prepared by combustion method, using cobalt, zinc and iron nitrates. The crystallinity of the as-burnt powder was developed by annealing at 700 {sup o}C. Crystalline phase was investigated by XRD. Using Williamson-Hall method, the average crystallite sizes for nanoparticles were determined to be about 27 nm before and 37 nm after annealing, and residual stresses for annealed particles were omitted. The morphology of the annealed sample was investigated by TEM and the mean particle size was determined to be about 30 nm. The final stoichiometry of the sample after annealing showed good agreement with the initial stoichiometry using atomic absorption spectrometry. Magnetic properties of the annealed sample such as saturation magnetization, remanence magnetization, and coercivity measured at room temperature were 70 emu/g, 14 emu/g, and 270 Oe, respectively. The Curie temperature of the sample was determined to be 350 {sup o}C using AC-susceptibility technique.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Turning “on” and “off” nucleation and growth: Microwave assisted synthesis of CdS clusters and nanoparticles

Graphical abstract: Display Omitted Highlights: ► Cadmium acetate and DMSO were employed as ion precursors. ► New approach to controlled CdS nanoparticle synthesis. ► CdS clusters and nanoparticles synthesis achieved using microwave irradiation. ► Microwave irradiation turns on and off nanoparticle growth. ► The formation of clusters, embryos and nanoparticles studied with optical spectroscopy. -- Abstract: We report here on the formation of CdS NP from the microwave assisted reaction of Cd(CH{sub 3}CO{sub 2}){sub 2} with dimethylsulfoxide (DMSO). DMSO serves as the solvent and a controlled source of sulfide ions to form (CdS){sub 1≤n≤5} clusters at the early stages of the process. The clusters grow into CdS nanoparticles, with diameters that range from 1.6 nm up to over 250 nm, with microwave heating. The time dependence of the onset of light absorption and absorbance are consistent with a concurrent nucleation and growth processes. The formation of clusters and nuclei and their subsequent reactions is controlled by turning on and off the energy supply consistent with an energy barrier to the formation of CdS nanostructures.

36 MATERIALS SCIENCE↗

Insertion of Ag atoms into layered MoO{sub 3} via a template route

Graphical abstract: PVP–Ag{sup +} complex self-assembled with inorganic (Mo{sub x}O{sub y}){sub ∞}{sup n−} chains into a layered hybrid, in which the PVP–Ag complex was intercalated between the (Mo{sub x}O{sub y}){sub ∞}{sup n−} layers. Calcinations of this hybrid at 500 °C lead to formation of Ag/MoO{sub 3} nanohybrid. By this method we have successfully inserted Ag atoms into the semiconductor MoO{sub 3} lattice. Display Omitted Highlights: ► We fabricated a PVP–Ag/polyoxomolybdate layered hybrid via in situ self-assembly. ► The PVP–Ag complex has been inserted between the molybdenum oxide layers. ► This layered hybrid transformed into Ag/MoO{sub 3} nanocomposite after calcinations. ► HR-TEM images show that Ag atoms of about 1 nm have been inserted in the MoO{sub 3} layers. -- Abstract: We report insertion of Ag atoms into layered MoO{sub 3} via an in situ template route. PVP–Ag{sup +} complex self-assembled with inorganic (Mo{sub x}O{sub y}){sub ∞}{sup n−} chains into a layered hybrid, in which the PVP–Ag complex was intercalated between the (Mo{sub x}O{sub y}){sub ∞}{sup n−} layers. Calcinations of this hybrid at 500 °C lead to formation of Ag/MoO{sub 3} hybrid, in which Ag nanoparticles of about 1 nm have been inserted between the MoO{sub 3} layers. By this method pillared MoO{sub 3} has been obtained very easily. We believe that this research opens new routes to fabricate novel intercalation compounds and metal/semiconductor nanohybrids via an efficient and green route.

36 MATERIALS SCIENCE↗

Sol–gel synthesis and electrical characterization of Bi{sub 3.25}La{sub 0.75}Ti{sub 3}O{sub 12} thin films

Graphical abstract: Display Omitted Highlights: ► Bi{sub 3.25}La{sub 0.75}Ti{sub 3}O{sub 12} (BLT) thin films on Pt/TiO{sub 2}/SiO{sub 2}/Si substrates prepared by sol–gel. ► Ethylacetoacetate (EAA) used as a replacement for highly toxic 2-methoxyethanol. ► 0.4 μm thick BLT film has 2P{sub r} ∼ 21 μC/cm{sup 2} and 2E{sub c} of ∼195 kV/cm at 300 kV/cm, εr = 140 and tan δ = 0.025, 1 kHz. ► BLT films with improved dielectric response when prepared form ethylacetoacetate (EAA). -- Abstract: Lanthanum bismuth titanate (Bi{sub 3.25}La{sub 0.75}Ti{sub 3}O{sub 12}) (BLT) thin films on Pt/TiO{sub 2}/SiO{sub 2}/Si substrates were prepared by sol–gel using ethylacetoacetate (EAA) as a replacement for the highly toxic 2-methoxyethanol. EAA is used as a modifier to stabilize the metal alkoxide. At 450 °C films are amorphous. After annealing at 650 °C films are crystalline and present good dielectric and ferroelectric properties. A 0.4 μm thick BLT film exhibits 2P{sub r} of ∼21 μC/cm{sup 2} and 2E{sub c} of ∼195 kV/cm at 300 kV/cm. The dielectric constant and dielectric losses of these BLT films at 1 kHz are 140 and 0.025, respectively.

36 MATERIALS SCIENCE↗

Facile synthesis and photocatalytic activity of monoclinic BiVO{sub 4} micro/nanostructures with controllable morphologies

Graphical abstract: Display Omitted Highlights: ► BiVO{sub 4} micro/nanostructures have been synthesized by a facile solvothermal method. ► The shapes of BiVO{sub 4} micro/nanostructures can be controlled by tuning the synthetic parameters. ► BiVO{sub 4} nanorods with rectangular cross sections exhibit improved photocatalytic activities. -- Abstract: Monoclinic BiVO{sub 4} (m-BiVO{sub 4}) micro/nanostructures, such as nanorods, nanofibers, bundle-like nanostructures, and porous submicrometer-sized rods, have been successfully synthesized by a facile solvothermal method in an ethylene glycol–water–sodium oleate system. The morphologies and sizes of m-BiVO{sub 4} micro/nanostructures can be controlled by adjusting the synthetic parameters, such as the concentrations of sodium oleate and reaction time. Among them, the synthesized m-BiVO{sub 4} nanorods have rectangular cross sections, and can grow along the [0 0 1] direction, and are enclosed by well-defined facets, such as (0 0 2), (2 4 0), and (2{sup ¯}10), which are distinct from that with circular cross sections. A crystallization-cleavage-disassembly process has been proposed for the formation of m-BiVO{sub 4} nanorods with rectangular cross sections. The photocatalytic activity of m-BiVO{sub 4} nanostructures is affected greatly by the sizes and shapes of m-BiVO{sub 4} nanostructures. Photocatalytic measurements show that the m-BiVO{sub 4} nanorods with rectangular cross sections exhibit higher photocatalytic activities of Rhodamine B in comparison with m-BiVO{sub 4} nanofibers with circular cross-sections and porous submicrometer-sized rods.

36 MATERIALS SCIENCE↗

One-step synthesis of Fe–N–S-tri-doped TiO{sub 2} catalyst and its enhanced visible light photocatalytic activity

Graphical abstract: FeNS-TiO{sub 2} exhibits stronger SPS response than that of pure TiO{sub 2}, indicating that the FeNS-TiO{sub 2} should have a higher separation rates of photoinduced charge carriers. Further, for the sample FeNS-TiO{sub 2} a broad shoulder SPS response can be seen at the wavelength range from 390 to 550 nm, suggesting that the light absorption in visible region of FeNS-TiO{sub 2} was greatly improved, which is beneficial to the enhancement of photocatalytic activity. Display Omitted Highlights: ► FeNS-TiO{sub 2} catalyst has been synthesized in the presence of ammonium ferrous sulfate. ► The light absorption edge of FeNS-TiO{sub 2} catalyst was red-shifted to visible region. ► The separation efficiency of photoinduced charge carriers of FeNS-TiO{sub 2} was improved. ► The activity enhanced mechanism of FeNS-TiO{sub 2} was discussed in detail. -- Abstract: Fe–N–S-tridoped TiO{sub 2} was synthesized through simple one step sol–gel reactions in the presence of ammonium ferrous sulfate. The resulting materials were characterized by X-ray diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy, diffuse reflectance spectrum and surface photovoltage spectroscopy. Results revealed that Fe and S were incorporated into the lattice of TiO{sub 2} by substituting for some Ti atoms and N for O atoms in the lattice of TiO{sub 2}. Tri-doping with Fe, N and S could inhibit the phase transformation of TiO{sub 2} from anatase to rutile, restrain the growth of crystallite sizes, extended the light absorption into the visible region and separate photoinduced charge carriers. The visible photocatalytic activity of Fe–N–S-tridoped TiO{sub 2} was higher than that of N-TiO{sub 2} and P25 TiO{sub 2}. The enhanced photocatalytic activity was attributed to the small crystallite size, high crystallinity, the intense light absorption in visible region, narrow band gap and high separation efficiency of photoinduced charge carriers.

36 MATERIALS SCIENCE↗

K{sub 3}YB{sub 6}O{sub 12}: A new nonlinear optical crystal with a short UV cutoff edge

Graphical abstract: Display Omitted Highlights: ► A new non-centrosymmetric borate, K{sub 3}YB{sub 6}O{sub 12}, has been synthesized. ► A K{sub 3}YB{sub 6}O{sub 12} crystal with dimensions of ∼40 mm × 30 mm × 10 mm was successfully grown. ► K{sub 3}YB{sub 6}O{sub 12} exhibits a short UV cutoff edge at 195 nm. ► Powder SHG effect of K{sub 3}YB{sub 6}O{sub 12} is weaker than that of KH{sub 2}PO{sub 4} (KDP). -- Abstract: A new non-centrosymmetric borate, K{sub 3}YB{sub 6}O{sub 12}, has been synthesized by solid state reaction techniques, and a K{sub 3}YB{sub 6}O{sub 12} crystal with dimensions of ∼40 mm × 30 mm × 10 mm was successfully grown by the top-seeded solution growth method using a K{sub 2}O–B{sub 2}O{sub 3}–KBF{sub 4} flux. K{sub 3}YB{sub 6}O{sub 12} crystallizes in the trigonal space group R32 with cell parameters of a = 13.2202(19) Å, c = 30.281(6) Å, and Z = 15. In the structure of K{sub 3}YB{sub 6}O{sub 12}, B{sub 5}O{sub 10} groups are bridged by Y{sub 3}O{sub 12} chains and discrete YO{sub 6} octahedra via corner-sharing, constructing columns packed side by side in a hexagonal motif along the c-axis to form a three-dimensional framework. The three-dimensional framework affords one-dimensional tunnels of 8-membered rings along the b-axis which are occupied by K atoms. K{sub 3}YB{sub 6}O{sub 12} melts incongruently at 941 °C, and exhibits a short UV cutoff edge at 195 nm. The second harmonic generation effect of K{sub 3}YB{sub 6}O{sub 12} is weaker than that of KH{sub 2}PO{sub 4}.

36 MATERIALS SCIENCE↗

A novel organic–inorganic hybrid with Anderson type polyanions as building blocks: (C{sub 6}H{sub 10}N{sub 3}O{sub 2}){sub 2}Na(H{sub 2}O){sub 2}[Al(OH){sub 6}Mo{sub 6}O{sub 18}]·6H{sub 2}O

Graphical abstract: Display Omitted Highlights: ► Synthesis of a novel inorganic–organic hybrid compound based on Anderson polyoxomolybdates. ► Characterization by X-ray diffraction, IR and UV–Vis spectroscopies of the new compound. ► Potential applications in catalysis, biochemical analysis and electrical conductivity of the organic–inorganic compound. -- Abstract: A new organic–inorganic hybrid compound based on Anderson polyoxomolybdates, (C{sub 6}H{sub 10}N{sub 3}O{sub 2}){sub 2}Na(H{sub 2}O){sub 2}[Al(OH){sub 6}Mo{sub 6}O{sub 18}]·6H{sub 2}O (1) have been isolated by the conventional solution method and characterized by single-crystal X-ray diffraction, infrared, ultraviolet spectroscopy and Thermogravimetric Analysis (TGA). This compound crystallized in the triclinic system, space group P−1, with a = 94.635(1) Å, b = 10.958(1) Å, c = 11.602(1) Å, α = 67.525(1)°, β = 71.049(1)°, γ = 70.124(1)° and Z = 1. The crystal structures of the compounds exhibit three-dimensional supramolecular assembly based on the extensive hydrogen bonding interactions between organic cations, sodium cations, water molecules and Anderson polyoxoanions. The infrared spectrum fully confirms the X-ray crystal structure and the UV spectrum of the title compound exhibits an absorption peak at 210 nm.

36 MATERIALS SCIENCE↗

Tunneling behavior in ion-assist ion-beam sputtered CoFe/MgO/NiFe magnetic tunnel junctions

Graphical abstract: Display Omitted Highlights: ► Dual ion beam sputtered MgO barrier for MTJs. ► ∼12% TMR at 60 K. ► Glazman and Matveev model fitted for quantification of elastic and inelastic tunneling conductance through barrier. -- Abstract: Magnetic tunnel junctions (MTJs) consisting of CoFe and NiFe as ferromagnetic electrodes and MgO as insulating barrier fabricated through in situ shadow masking employing ion beam sputtering are studied for their tunneling magnetoresistance (TMR) and temperature dependence of the tunneling conductance behavior. The tunneling characteristics of these MTJs exhibited barrier height of 0.7 eV and width of 3.3 nm. These MTJs possessed ∼12% TMR at 60 K. The temperature dependence of conductance behavior of these junctions have revealed finite contributions from inelastic tunneling through the barrier via hopping conduction via present localized states which arise due to the presence of ionic interstitial defects in the MgO oxide barrier. The fitting of the data reveals that thirteenth order of hopping conduction is operative through MgO barrier.

36 MATERIALS SCIENCE↗

Role of WO{sub 3} on DC conductivity and some optical properties of TeO{sub 2} based glasses

Graphical abstract: Display Omitted Highlights: ► TeO{sub 2}–GeO{sub 2}–WO{sub 3} glass system was prepared using melt quenching method. ► DC conductivity, FESEM, EDS and optical absorption studies were carried out. ► Non bridging oxygens (NBOs) are increases with increase of WO{sub 3} content. ► Increase in NBOs is responsible for the increase in the refractive index of glasses. ► Two charge transport mechanisms are coexist in these glasses. -- Abstract: DC electrical conductivity and optical absorption studies have been employed to understand the influence of WO{sub 3} content on the electrical and optical properties of the TeO{sub 2}–GeO{sub 2}–WO{sub 3} glass system. Field emission scanning electron microscope (FESEM), Energy dispersive X-ray spectrometry (EDS) measurements have been used to confirm the glassy nature and the elemental analysis of the glass composition, respectively. DC electrical conductivity of the glasses was studied in the temperature range 423–613 K. From Arrhenius plot, the activation energies (E{sub act}) of all the glasses have been calculated and conduction mechanism has been discussed in terms of structural changes occurred with the addition of WO{sub 3} content. The optical properties such as optical band gap (E{sub opt}), Urbach energy (ΔE), molar refraction (R{sub M}), metallization criterion (M), electronic polarizability of the oxide ion (α{sub O{sup 2}{sup −}}) and refractive index (n) have been determined from optical absorption data and were found to be composition dependent.

36 MATERIALS SCIENCE↗

Determination of thermal and electronic carrier transport properties of SnS thinfilms using photothermal beam deflection technique

Graphical abstract: Display Omitted Highlights: ► Determination of carrier transport properties of SnS thin films non-destructively. ► SnS thin films were deposited by chemical spray pyrolysis technique. ► Photothermal beam deflection technique is used for film analysis. ► Optimization of film deposition parameters. ► Photothermal imaging of SnS films. -- Abstract: Photothermal beam deflection technique is an efficient tool for non-destructive evaluation of thin films. Thin films of tin mono sulphide, which find application as absorber layer in photovoltaic cells, were deposited by chemical spray pyrolysis technique and their carrier transport properties were determined using photothermal beam deflection technique. Thermal diffusivity, minority carrier lifetime, mobility and surface recombination velocity of these films fabricated under different spray conditions like varying spray rate, Sn/S ratio and substrate temperature were determined. Photothermal beam deflection technique was also employed for constructing the thermal images of these films to evaluate the film uniformity.

36 MATERIALS SCIENCE↗

Effect of solvents on morphology and photocatalytic activity of BiOBr synthesized by solvothermal method

Graphical abstract: Display Omitted Highlight: ► BiOBr photocatalysts with various morphologies were synthesized. ► The choice of organic solvents was first extended to glycerol. ► Morphologies are greatly dependant on the solvent used. ► GR-mediated BiOBr has the highest photocatalytic activity. -- Abstract: BiOBr photocatalysts with various morphologies have been synthesized via a solvothermal method in ethanol-, ethylene glycol (EG)- and glycerol (GR)-mediated conditions, respectively. The effects of different solvents on the size and morphology of BiOBr crystal are investigated in detail. Viscosity of the solvents is believed to be a key factor in determining morphology of BiOBr crystal, which leads to the different formation mechanisms. In addition, it is found that the photocatalytic activities of BiOBr samples for the degradation of methyl orange (MO) under visible light irradiation are dependent on the solvent used in the synthesis. The differences in the photocatalytic activities are mainly attributed to the different morphologies, which further results in the difference in Brunauer–Emmett–Teller (BET) surface areas, bandgaps, the exposed crystal facets and porous structures.

36 MATERIALS SCIENCE↗

Low temperature solid-state synthesis of nanocrystalline gallium nitride

Graphical abstract: Display Omitted Highlights: ► GaN nanocrystalline was prepared via a solid-state reacion at relatively low temperature. ► The sizes and crystallinities of the GaN samples obtained at the different temperatures are investigated. ► The GaN sample has oxidation resistance and good thermal stability below 1000 °C. -- Abstract: Nanocrystalline gallium nitride was synthesized by a solid-state reaction of metallic magnesium powder, gallium sesquioxide and sodium amide in a stainless steel autoclave at a relatively low temperature (400–550 °C). The structures and morphologies of the obtained products were derived from X-ray powder diffraction (XRD) and transmission electron microscopy (TEM). XRD patterns indicated that the products were hexagonal GaN (JCPDS card no. 76-0703). The influence of reaction temperature on size of the products was studied by XRD and TEM. Furthermore, the thermal stability and oxidation resistance of the nanocrystalline GaN were also investigated. It had good thermal stability and oxidation resistance below 800 °C in air.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The photoluminescence properties of Er{sup 3+}-doped ZrO{sub 2} nanotube arrays prepared by anodization

Graphical abstract: Display Omitted Highlights: ► Er{sup 3+}-doped ZrO{sub 2} nanotube arrays were prepared by anodization of Zr–Er alloy. ► Small tetragonal zirconia crystallites are tended to be formed due to the doping of Er{sup 3+}. ► Under excitation at 317 nm, the ZrO{sub 2} nantube arrays have strongest photoluminescence intensity. -- Abstract: Er{sup 3+}-doped ZrO{sub 2} nanotube arrays were prepared by anodization of Zr–Er alloy which was obtained by melting zirconium with 1.0 wt% erbium. The morphology, structure and photoluminescence properties were studied through scanning electron microscope, transmission electron microscope, X-ray diffraction and photoluminescence analyzer. X-ray diffraction results indicate that doping of Er{sup 3+} affects the crystal structure and grain size obviously and the Er{sup 3+}-doped samples tend to form small tetragonal grains. Photoluminescence analyses show that when Er{sup 3+}-doped zirconia nanotube arrays are excited at 317 nm, there are two strong photoluminescence emission peaks at 373 nm and 415 nm. When the excitation wavelength is 257 nm, a photoluminescence emission peak appears at 363 nm. Under same measurement conditions, emission peaks of the undoped ZrO{sub 2} nanotube arrays are very weak.

36 MATERIALS SCIENCE↗