Unravelling the low thermal expansion coefficient of cation-substituted YBaCo[subscript 4]O[subscript 7+delta]
Abstract not provided
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Abstract not provided
The evolution of the crystal structure and crystallographic texture of porous synthetic cordierite was studied by in situ high-temperature neutron diffraction up to 1373 K, providing the first in situ high-temperature texture measurement of this technologically important material. It was observed that the crystal texture slightly weakens with increasing temperature, concurrently with subtle changes in the crystal structure. These changes are in agreement with previous work, leading the authors to the conclusion that high-temperature neutron diffraction allows reliable crystallographic characterization of materials with moderate texture. It was also demonstrated that structural changes occur at about the glass transition temperature of the cordierite glass (between 973 and 1073 K). Crystal structure refinements were conducted with and without quantitative texture analysis being part of the Rietveld refinement, and a critical comparison of the results is presented, contributing to the sparse body of literature on combined texture and crystal structure refinements.
Previous attempts to characterize the γ-brass crystal structure of Ni–Zn (15.4–24% Ni) have failed to identify the location of the Ni and Zn atoms in the crystal lattice for more than 15.4% Ni content (Ni 8 Zn 44 ) due to the similar X-ray diffraction cross sections of Ni and Zn. Ni 8 Zn 44 is known to have a typical γ-brass crystal structure (space group 217, I$\overline{43}$m, 52 atom unit cell with four distinct symmetry positions: inner tetrahedral, outer tetrahedral, octahedral, and cuboctahedral) where Ni atoms reside in outer tetrahedral sites completely isolated from each other and coordinated by 12 Zn atoms. We utilize neutron diffraction to identify the substitution positions of Zn by Ni when the Ni content is increased above 15.4% and up to 19.2% (Ni 10 Zn 42 ). Upon increasing the Ni content above 15.4% (Ni 9 Zn 43 and Ni 10 Zn 42 ), Zn in the γ-brass octahedral positions are replaced by Ni leading to the formation of Ni–Ni–Ni trimers, which are absent in Ni8Zn44. Density functional theory (DFT) calculations confirm our neutron diffraction results regarding the optimal position of excess Ni in the γ-brass unit cell. The well-defined atomic site distribution in γ-brass Ni–Zn provides an excellent opportunity for producing site-isolated base metal catalysts that may find application in selective semi-hydrogenation. We investigated the presence of Ni–Ni–Ni trimers on the surface using H–D exchange and ethylene hydrogenation as probe reactions, observing the influence of Ni concentration on catalysis. We conclude the catalytic performance is insensitive to Ni content. We provide a possible explanation for this observation using DFT calculations, which demonstrate that surface containing trimer sites are energetically unfavorable and therefore not exposed on Wulff reconstructions of γ-brass phase Ni–Zn particles.
Graphical abstract: - Highlights: • Prepared SrFe{sub 0.9}Ti{sub 0.1}O{sub 3−δ} is in nanocrystalline form. • Arrott plot shows absence of spontaneous magnetization which rules out the possibility of long range ferromagnetic order. • AC susceptibility data is evidence of cluster spin glass. • There is no magnetic Bragg's reflection. • By substituting Ti{sup 4+}, helical antiferromagetic SrFeO{sub 3} is transformed to a cluster spin glass. - Abstract: The magnetic ground state of nanocrystalline SrFe{sub 0.9}Ti{sub 0.1}O{sub 3−δ} system has been investigated from 2 K to 300 K using AC Susceptibilty (ACS), magnetization and neutron diffraction measurements. The cusp in the temperature dependent magnetization and dispersion below T{sub max} (the temperature at which the maximum susceptibility is observed) in real part of ac susceptibility with frequency is observed. Arrott plot shows the lack of M{sub S} (spontaneous magnetization) down to 2 K, and the non-occurrence of magnetic Bragg reflections below the T{sub max} in neutron diffraction measurements, indicates the absence of long range ferro and antiferromagnetic order. The frequency dependence of T{sub max} obeys Vögel–Fulcher model establishing the cluster spin glass behavior in this system.
We report Na 3 Co 2 SbO 6 is a potential Kitaev magnet with a monoclinic layered crystal structure. Recent investigations of the C3-symmetric sister compound Na 2 Co 2 TeO 6 have uncovered a unique triple-q magnetic ground state, as opposed to a single-q (zigzag) one, prompting us to examine the influence of the reduced structural symmetry of Na 3 Co 2 SbO 6 on its ground state. Neutron diffraction data obtained on a twin-free crystal reveal that the ground state remains a multi-q state, despite the system's strong non-C 3 -symmetric anisotropy. This robustness of multi-q orders suggests that they are driven by a common mechanism in the honeycomb cobaltates, such as interactions beyond the bilinear order. Spin-polarized neutron diffraction results show that the ordered moments are entirely in plane, with each staggered component orthogonal to the propagating wave vector. The inferred ground state appears more compatible with the so-called XXZ easy-plane anisotropy than the Kitaev anisotropy, and features unequal ordered moments reduced by strong quantum fluctuations.
Iulia Concordia is an important Roman settlement known for the production of iron objects and weapons during the Roman Empire. A huge number of well-preserved styli were found in the past century in the bed of an old channel. In order to shed light about the production processes used by Roman for stylus manufacturing, a neutron diffraction residual strain analysis was performed on the POLDI materials science diffractometer at the Paul Scherrer Institut in Switzerland. Here, we present results from our investigation conducted on 11 samples, allowing to define, in a non-invasive way, the residual strain map related to the ancient Roman working techniques. - Highlights: • We examined 11 Roman styli from the settlement of Iulia Concordia, Italy. • We performed a neutron diffraction residual strain analysis on POLDI at PSI (CH). • We identified the production processes used by Roman for stylus manufacturing. • We clarified the way and direction of working applied for different classes of styli.
The crystal structure of new Mo{sub 2}NiB{sub 2}-type (Gd, Tb, Dy){sub 2}Ni{sub 2.35}Si{sub 0.65} (Immm, No. 71, oI10) and La{sub 2}Ni{sub 3}-type (Dy, Ho){sub 2}Ni{sub 2.5}Si{sub 0.5} (Cmce No. 64, oC20) compounds has been established using powder X-ray diffraction studies. Magnetization measurements show that the Mo{sub 2}NiB{sub 2}-type Gd{sub 2}Ni{sub 2.35}Si{sub 0.65} undergoes a ferromagnetic transition at ~66 K, whereas isostructural Tb{sub 2}Ni{sub 2.35}Si{sub 0.65} shows an antiferromagnetic transition at ~52 K and a field-induced metamagnetic transition at low temperatures. Neutron diffraction study shows that, in zero applied field, Tb{sub 2}Ni{sub 2.35}Si{sub 0.65} exhibits c-axis antiferromagnetic order with propagation vector K=[1/2, 0, 1/2] below its magnetic ordering temperature and Tb magnetic moment reaches a value of 8.32(5) μ{sub B} at 2 K. The La{sub 2}Ni{sub 3}-type Dy{sub 2}Ni{sub 2.5}Si{sub 0.5} exhibits ferromagnetic like transition at ~42 K with coexisting antiferromagnetic interactions and field induced metamagnetic transition below ~17 K. The magnetocaloric effect of Gd{sub 2}Ni{sub 2.35}Si{sub 0.65}, Tb{sub 2}Ni{sub 2.35}Si{sub 0.65} and Dy{sub 2}Ni{sub 2.5}Si{sub 0.5} is calculated in terms of isothermal magnetic entropy change and it reaches a maximum value of −14.3 J/kg K, −5.3 J/kg K and −10.3 J/kg K for a field change of 50 kOe near 66 K, 52 K and 42 K, respectively. Low temperature magnetic ordering with enhanced anisotropic effects in Tb{sub 2}Ni{sub 2.35}Si{sub 0.65} and Dy{sub 2}Ni{sub 2.35}Si{sub 0.65} is accompanied by a positive magnetocaloric effect with isothermal magnetic entropy changes of +12.8 J/kg K and ~+9.9 J/kg K, respectively at 7 K for a field change of 50 kOe. - Graphical abstract: The (Gd, Tb, Dy){sub 2}Ni{sub 2.35}Si{sub 0.65} supplement the series of Mo{sub 2}NiB{sub 2}-type rare earth compounds, whereas the (Dy, Ho){sub 2}Ni{sub 2.5}Si{sub 0.5} supplement the series of La{sub 2}Ni{sub 3}-type rare earth compounds. The variation of alloy’s composition by ~3 at% i.e. from Dy{sub 2}Ni{sub 2.35}Si{sub 0.65} to Dy{sub 2}Ni{sub 2.5}Si{sub 0.5} leads to significant transformation of crystal structure of compound with different variant of distortion of Po-type rare earth sublattice, as in Gd–Co–Ga and Er–Ni–In systems: the Mo{sub 2}NiB{sub 2}-type Gd{sub 2}Co{sub 2}Ga and La{sub 2}Ni{sub 3}-type Gd{sub 2}Co{sub 2.9}Ga{sub 0.1}, and Mo{sub 2}FeB{sub 2}-type Er{sub 2}Ni{sub 1.78}In and Mn{sub 2}AlB{sub 2}-type Er{sub 2}Ni{sub 2}In. Magnetization measurements indicate collinear ferromagnetic ordering of Mo{sub 2}NiB{sub 2}-type Gd{sub 2}Ni{sub 2.35}Si{sub 0.65} and a complex antiferromagnetic ordering with low-temperature metamagnetic nature for Mo{sub 2}NiB{sub 2}-type Tb{sub 2}Ni{sub 2.35}Si{sub 0.65} compounds. However, neutron diffraction study in zero applied field of Tb{sub 2}Ni{sub 2.35}Si{sub 0.65} reveals c-axis pure antiferromagnetic ordering of terbium sublattice with K=[1/2, 0, 1/2] propagation vector. Magnetization measurements indicate ferromagnetic order with coexisting antiferromagnetic interactions and low-temperature metamagnetic state for La{sub 2}Ni{sub 3}-type Dy{sub 2}Ni{sub 2.5}Si{sub 0.5}. We suggest possible polymorphism in other Mo{sub 2}FeB{sub 2}-type, Mo{sub 2}NiB{sub 2}-type, La{sub 2}Ni{sub 3}-type and Mn{sub 2}AlB{sub 2}-type rare earth compounds with corresponding change in their magnetic properties. - Highlights: • (Gd, Tb, Dy){sub 2}Ni{sub 2.35}Si{sub 0.65} compounds crystallize in the Mo{sub 2}NiB{sub 2}-type structure. • (Dy, Ho){sub 2}Ni{sub 2.5}Si{sub 0.5} compounds crystallize in the La{sub 2}Ni{sub 3}-type structure. • Gd{sub 2}Ni{sub 2.35}Si{sub 0.65} shows pure ferromagnetic type ordering. • Tb{sub 2}Ni{sub 2.35}Si{sub 0.65} and Dy{sub 2}Ni{sub 2.5}Si{sub 0.5} show mixed ferro-antiferromagnetic ordering. • Tb{sub 2}Ni{sub 2.35}Si{sub 0.65} and Dy{sub 2}Ni{sub 2.5}Si{sub 0.5} exhibit low-temperature metamagnetic behaviour.
Hexagonal manganates RMnO{sub 3} (R=Y, Ho, Dy) have been recently shown to exhibit oxygen-storage capacities promising for three-way catalysts, air-separation, and related technologies. Here, we demonstrate that Ti substitution for Mn can be used to chemically tune the oxygen-breathing properties of these materials towards practical applications. Specifically, Y(Mn{sub 1−x}Ti{sub x})O{sub 3} solid solutions exhibit facile oxygen absorption/desorption via reversible Ti{sup 3+}↔Ti{sup 4+} and Mn{sup 3+}↔Mn{sup 4+} reactions already in ambient air at ≈400 °C and ≈250 °C, respectively. On cooling, the oxidation of both cations is accompanied by oxygen uptake yielding a formula YMn{sup 3+}{sub 1−x-y}Mn{sup 4+}{sub y}Ti{sup 4+}{sub x}O{sub 3+δ}. The presence of Ti promotes the oxidation of Mn{sup 3+} to Mn{sup 4+}, which is almost negligible for YMnO{sub 3} in air, thereby increasing the uptake of oxygen beyond that required for a given Ti{sup 4+} concentration. The reversibility of the redox reactions is limited by sluggish kinetics; however, the oxidation process continues, if slowly, even at room temperature. The extra oxygen atoms are accommodated by the large interstices within a triangular lattice formed by the [MnO{sub 5}] trigonal bipyramids. According to bond distances from Rietveld refinements using the neutron diffraction data, the YMnO{sub 3} structure features under-bonded Mn and even more severely under-bonded oxygen atoms that form the trigonal bases of the [MnO{sub 5}] bipyramids. The tensile bond strain around the 5-fold coordinated Mn site and the strong preference of Ti{sup 4+}(and Mn{sup 4+}) for higher coordination numbers likely provide driving forces for the oxidation reaction. Reverse Monte Carlo refinements of the local atomic displacements using neutron total scattering revealed how the excess oxygen atoms are accommodated in the structure by correlated local displacements of the host atoms. Large displacements of the under-bonded host oxygen atoms play a key part in this lattice-relaxation process, facilitating reversible exchange of significant amounts of oxygen with atmosphere. - Graphical abstract: Concurrent redox reactions involving Ti and Mn yield facile absorption/desorption of excess oxygen. - Highlights: • Concurrent redox reactions involving Ti and Mn yield oxygen absorption/desorption. • Excess oxygen is accommodated as interstitials via correlated atomic shifts. • Oxygen breathing is facilitated by the under-bonding of host Mn and O atoms.
The Fenna–Matthews–Olson protein from Prosthecochloris aestuarii ( Pa FMO) has been crystallized in a new form that is amenable to high-resolution X-ray and neutron analysis. The crystals belonged to space group H 3, with unit-cell parameters a = b = 83.64, c = 294.78 Å, and diffracted X-rays to ∼1.7 Å resolution at room temperature. Large Pa FMO crystals grown to volumes of 0.3–0.5 mm 3 diffracted neutrons to 2.2 Å resolution on the MaNDi neutron diffractometer at the Spallation Neutron Source. The resolution of the neutron data will allow direct determination of the positions of H atoms in the structure, which are believed to be fundamentally important in tuning the individual excitation energies of bacteriochlorophylls in this archetypal photosynthetic antenna complex. This is one of the largest unit-cell systems yet studied using neutron diffraction, and will allow the first high-resolution neutron analysis of a photosynthetic antenna complex.
Here, this study investigates the structural and magnetic properties of arc-melted (Mo 2/3 Dy 1/3 ) 2 AlC polycrystalline samples, a member of the i-MAX phase family. Temperature-dependent magnetization and specific heat measurements confirm the low-temperature antiferromagnetic transitions around 14 K and 17 K. Neutron diffraction data collected at 4 K reveal the emergence of magnetic Bragg peaks that are not allowed in the paramagnetic space group C2/c, further confirming the presence of antiferromagnetic ordering. The detection of a secondary phase, DyAl 2 , is complicated by overlapping Bragg peaks with the monoclinic phase of (Mo 2/3 Dy 1/3 ) 2 AlC in powder XRD patterns. However, magnetization and neutron diffraction data suggest the presence of DyAl 2 , evidenced by a ferromagnetic phase transition around 62 K.
High Mn austenitic steels are considered an economical alloy system for hydrogen storage and transport applications. This study used stacking fault energy (SFE) as a design parameter to achieve hydrogen embrittlement (HE)-resistant high Mn austenitic alloys. The role of hydrogen on the deformation mechanisms of low (29 mJ/m 2 ) and high SFE (49 mJ/m 2 ) alloys was evaluated through in-situ neutron diffraction during tensile loading. Hydrogen-precharging increased yield strength, partly due to hydrogen-induced lattice distortion (i.e., solute strengthening). Hydrogen accelerated the increase in defect density, including dislocations and stacking faults. The formation of planar deformation structures (twins and stacking faults), relative to dislocations, plays a critical role in promoting hydrogen-assisted fracture. The stacking fault frequency parameter obtained from neutron diffraction quantifies planar deformation tendencies, correlated with HE sensitivity. The higher SFE alloy exhibited greater resistance to HE, associated with the reduced propensity to form stacking faults and twins upon deformation in the hydrogen-precharged condition.
The La{sub 0.8–x}Tb{sub x}Ca{sub 0.2}CoO{sub 3} cobaltites of orthoperovskite Pbnm structure were investigated by the X-ray and neutron diffraction, specific heat, and magnetization measurements. The terbium doping has two important effects, it increases the size disorder on perovskite A-sites and influences the magnetic properties due to large Ising-type moments (∼8.9 Bohr magnetons per Tb). The compounds show a bulk magnetic moment below T{sub C} = 82 K, 53 K, and 30 K for x = 0.1, 0.2, and 0.3, respectively. The neutron diffraction evidences a long-range ferromagnetic arrangement of cobalt moments, combined below ∼20 K with ordering of terbium moments in a canted arrangement. A homogeneous magnetic phase is proved for the x = 0.1 sample, while x = 0.2 and 0.3 are in an intrinsically non-homogeneous magnetic state with long-range ordering only comprising 55% and 30% of the sample volumes. The ac susceptibility experiments prove a glassy character of the terbium doped samples and provide arguments for the short-range ordering above T{sub C} and wide distribution of relaxation times.
In an effort to explore the effect of substitution Fe by Cr in NaZn{sub 13}-type La{sub 0.7}Pr{sub 0.3}Fe{sub 11.4−x}Cr{sub x}Si{sub 1.6} (x = 0, 0.06, 0.12, 0.26, and 0.34) compounds, the structure and magnetic properties have been investigated by high intensity of x-ray and neutron diffraction, scanning electron microscopy, specific heat, and magnetization measurement. It has been found that a substitution of Cr for Fe in this compounds leads to decrease in the lattice parameter a at room temperature but variation on Curie temperature (T{sub C}). While the first order nature of magnetic phase transition around T{sub C} does not change with increasing Cr content up to x = 0.34. High intensity x-ray and neutron diffraction study at variable temperatures for highest Cr concentration x = 0.34 confirmed the presence of strong magneto-volume effect around T{sub C} and indicated the direct evident of coexistence across magnetic transition as characteristic of first order nature. The values of −ΔS{sub M} around T{sub C} decrease from 17 J kg{sup −1} K{sup −1} for x = 0 to 12 J kg{sup −1} K{sup −1} for x = 0.06 and then increases with further increasing Cr content up to 17.5 J kg{sup −1} K{sup −1} for x = 0.34 under a change of 0–5 T magnetic field. Similar behavior on relative cooling power which is decrease from 390 J kg{sup −1} for x = 0 to 365 J kg{sup −1} for x = 0.06 at the beginning and then increases up to 400 J kg{sup −1} for x = 0.34. From the point of this view with the highest Cr concentration (x = 0.34) exhibits favourable material candidate for magnetic refrigerator application therefore should inspire further study concerning on higher Cr concentration in this compound.
A series of perovskites Sr4-xLaxFe3ReO12 (x = 0.0, 1.0, 2.0) has been prepared by wet chemistry methods. The structure analyses by powder x-ray, neutron diffraction and electron microscopy show that these compounds adopt simple perovskite structures without cation ordering over the B sites: tetragonal (I4/mcm) for x = 0.0 and 1.0 and orthorhombic (Pbmn) for x = 2.0. The oxidation state of the cations in the compound with x = 0.0 appear to be Fe3+/4+ and Re7+ and decrease for both with La substitution as evidenced by x-ray absorption spectroscopy. All the compounds are antiferromagnetically ordered above room temperature, as demonstrated by M ssbauer spectroscopy and the magnetic structures, which were determined by powder neutron diffraction. The substitution of Sr by La strongly affects the magnetic properties with an increase of TN up to ~ 750 K.
Low transformation temperature welding (LTTW) consumables are characterized by a low martensite start temperature and a large fraction of martensite forming in the weld. It can efficiently reduce the tensile residual stress because the volume expansion associated with the martensitic transformation compensates for the thermal contraction during cooling. In this work, a LTTW wire, designated as EH200B, was created for the arc welding of advanced high-strength steel thin plates. In comparison to conventional ER70S-3 wires, this LTTW wire generated an opposite distortion pattern. Neutron diffraction measurements along the center thickness of the welded plates showed the maximum residual stress along the longitudinal direction (LD) in the weld region, and the heat-affected zone (HAZ) immediately adjacent to the weld region was reduced from ~330 MPa to below 240 MPa by using the LTTW wire. A finite element (FE) model was developed to predict the residual stress distributions of the plates welded under these two wires. The simulation results showed reasonable agreement with the volume-average neutron diffraction data. Compressive residual stress in the weld region using the LTTW wire was predicted by the FE method. Electron backscattered diffraction and x-ray diffraction measurements confirmed ~90% martensite was present in the LTTW weld. The fatigue life of DP980 steel lap joint panels using EH200B wire nearly doubled that of ER70S-3 wire. This improvement was attributed to the high strength and low LD residual stress in the weld and HAZ immediately adjacent to the weld.
A polycrystalline sample of SrLa{sub 2}Ni{sub 2}TeO{sub 9} has been synthesized using a standard ceramic method and characterized by neutron diffraction, magnetometry and electron microscopy. The compound adopts a monoclinic, perovskite-like structure with space group P2{sub 1}/n and unit cell parameters a=5.6008(1), b=5.5872(1), c=7.9018(2) Å, β=90.021(6)° at room temperature. The two crystallographically-distinct B sites are occupied by Ni{sup 2+} and Te{sup 6+} in ratios of 83:17 and 50:50. Both ac and dc magnetometry suggest that the compound is a spin glass below 35 K but the neutron diffraction data show that some regions of the sample are antiferromagnetic. Electron microscopy revealed twinning on a nanoscale and local variations in composition. These defects are thought to be responsible for the presence of two distinct types of antiferromagnetic ordering. - Highlights: • Coexistence of spin-glass and ordered phases. • Local inhomogeneity despite long-range inhomogeneity. • Contrasting magnetic properties of SrLa{sub 2}Ni{sub 2}TeO{sub 9} and La{sub 3}Ni{sub 2}SbO{sub 9}.
To explore the evolution of magnetic properties from ferromagnetic LaCo2P2 to paramagnetic LaFe2P2 (both of ThCr2Si2 structure type) a series of mixed composition LaFexCo2-xP2 (x e 0.5) has been comprehensively investigated by means of single-crystal and powder X-ray and neutron diffraction, magnetization and heat capacity measurements, M ossbauer spectroscopy, and electronic band structure calculations. The Curie temperature decreases from 132 K in LaCo2P2 to 91 K in LaFe0.05Co1.95P2. The ferromagnetic ordering is suppressed at higher Fe content. LaFe0.1Co1.9P2 and LaFe0.2Co1.8P2 demonstrate spin-glass-like behavior, which was also confirmed by the absence of characteristic features of long-range magnetic ordering, namely, a -type anomaly in the heat capacity, a hyperfine splitting in the Mossbauer spectrum, and magnetic reflections in the neutron diffraction pattern. Finally, both LaFe0.3Co1.7P2 and LaFe0.5Co1.5P2 exhibit paramagnetic behavior down to 1.8 K. The unit cell parameters of the mixed compounds do not follow the Vegard behavior as the increase in the Fe content results in the decrease of average M-M distances (M = Fe, Co). Quantum-chemical calculations and crystal orbital Hamiltonian population analysis reveal that upon aliovalent (nonisoelectronic) substitution of Fe for Co the antibonding character of M-M interactions is reduced while the Fermi level is shifted below the DOS peak in the 3d metal subband. As the result, at higher Fe content the Stoner criterion is not satisfied and no magnetic ordering is observed.
Solid solutions of InMCu{sub 1-x}Mg{sub x}O{sub 4} (M=Ga{sup 3+}, Al{sup 3+}) have been synthesized to understand the influence of the trigonal bipyramidal (TBP) crystallographic M{sup 3+}/Cu{sup 2+} site of the YbFe{sub 2}O{sub 4}-type structure through powder X-ray and neutron diffraction, dielectric and magnetism measurements. The addition of Mg{sup 2+} in the InGaCuO{sub 4} lattice results in a decrease of the dielectric constant, but the dielectric loss is not affected until the concentration of Mg{sup 2+} is above x=0.50. The shift in the diffraction peaks, and subsequently the change in the lattice parameters, cannot be exclusively explained by the change in ionic radii. These results show the first observation of the reduction in axial bond lengths for TBP Cu{sup 2+} in a YbFe{sub 2}O{sub 4}-type crystal lattice. - Graphical abstract: Solid solutions of InMCu{sub 1-x}Mg{sub x}O{sub 4} (M=Ga{sup 3+}, Al{sup 3+}) have been synthesized and analyzed with powder X-ray and neutron diffraction, dielectric and magnetism measurements. A shift in the lattice parameters that cannot be explained by the change in ionic radii is addressed through a study of the trigonal bipyramidal site. Highlights: Black-Right-Pointing-Pointer Solid solutions of InMCu{sub 1-x}Mg{sub x}O{sub 4} (M=Ga{sup 3+}, Al{sup 3+}) have been synthesized. Black-Right-Pointing-Pointer The observed dielectric properties decreased with the dilution of Cu{sup 2+}. Black-Right-Pointing-Pointer Antiferromagnetic interactions, without ordering, were observed in InGaCu{sub 1-x}Mg{sub x}O{sub 4}. Black-Right-Pointing-Pointer A reduction in the axial TBP bond lengths produced a large change in the c/a ratio. Black-Right-Pointing-Pointer Orbital overlap across the TBP layers greatly affected the observed properties.