Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Nature Run”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Numerical solutions of Navier-Stokes equations for a Butler wing

The flow field is simulated on the surface of a given delta wing (Butler wing) at zero incident in a uniform stream. The simulation is done by integrating a set of flow field equations. This set of equations governs the unsteady, viscous, compressible, heat conducting flow of an ideal gas. The equations are written in curvilinear coordinates so that the wing surface is represented accurately. These equations are solved by the finite difference method, and results obtained for high-speed freestream conditions are compared with theoretical and experimental results. In this study, the Navier-Stokes equations are solved numerically. These equations are unsteady, compressible, viscous, and three-dimensional without neglecting any terms. The time dependency of the governing equations allows the solution to progress naturally for an arbitrary initial initial guess to an asymptotic steady state, if one exists. The equations are transformed from physical coordinates to the computational coordinates, allowing the solution of the governing equations in a rectangular parallel-piped domain. The equations are solved by the MacCormack time-split technique which is vectorized and programmed to run on the CDC VPS 32 computer.

Abolhassani, J. S.↗

Prospects for Heavy Neutral SUSY HIGGS Scalars in the hMSSM and Natural SUSY at LHC Upgrades

We examine production and decay of heavy neutral SUSY Higgs bosons pp→H,A→ττ¯ within the hMSSM and compare against a perhaps more plausible natural supersymmetry scenario dubbed mh125(nat) which allows for a natural explanation for mweak≃mW,Z,h∼100 GeV while maintaining mh≃125 GeV. We evaluate signal against various Standard Model backgrounds from γ,Z→ττ¯, tt¯ and vector boson pair production VV. We combine the transverse mass method for back-to-back (BtB) taus along with the ditau mass peak mττ method for acollinear taus as our signal channels. This technique ultimately gives a boost to the signal significance over the standard technique of using just the BtB signal channel. We evaluate both the 95% CL exclusion and 5σ discovery reach in the mA vs. tanβ plane for present LHC with 139 fb−1, Run 3 with 300 fb−1 and high luminosity LHC (HL-LHC) with 3000 fb−1 of integrated luminosity. For tanβ=10, the exclusion limits range up to mA∼1, 1.1 and 1.4 TeV, respectively. These may be compared to the range of mA values gleaned from a statistical analysis of the string landscape wherein mA can range up to ∼8 TeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Naturally Self-Tuned Low Mass Composite Scalars

Scalar bosons composed of a pair of chiral fermions in a non-confining potential have an effective Yukawa coupling, $g$, to free external chiral fermions. At large distance a Feynman loop of external fermions generates a scale invariant potential, $V_{loop}\propto -g^2/{\rho^{2}}$, for separation $\rho$, which acts on valence fermions. This generally forces the $s$-wave ground state to deform to a static, zero mass, configuration, and for slowly running, perturbative $g$, a large external "shroud" wave function forms. This is related to old results of Landau and Lifshitz in quantum mechanics. The massless composite scalar boson ground state is then an extended object. Infra-red effects can generate a small mass for the system. This points to a perturbative BEH-boson composed of top and anti-top quarks and a novel dynamical mechanism for spontaneous electroweak symmetry breaking.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Demographic Microsimulator for Integrated Urban Systems: Adapting Panel Survey of Income Dynamics to Capture the Continuum of Life

Agent-based models (ABMs) in transportation modeling simulate activity and travel decisions at the disaggregate level of households and individuals. To do this, ABMs require detailed and realistic information on agents’ socioeconomic and demographic characteristics. Various synthetic population generators have been proposed to address this need. However, most of those currently in practice are cross-sectional in nature and do not account for the dynamics within households and individuals as they progress through life events over time. This is a major shortcoming, as literature has shown that transportation decisions are affected by the transition between and co-occurrence of life cycle events. While some demographic evolution simulators have been proposed to address this issue, they are developed using cross-sectional data and capture only a small set of life cycle events and their interdependence. Addressing these drawbacks, we propose a demographic microsimulator (DEMOS) that captures the “continuum of life” by considering a range of household- and individual-level life cycle events. DEMOS is developed using the Panel Survey of Income Dynamics, one of the world’s longest-running longitudinal surveys. The DEMOS submodels consider key life cycle events that are influenced by agents’ demographic variables. DEMOS is applied to evolve the population of the San Francisco Bay Area over a 9-year horizon. Results demonstrate how DEMOS generates life trajectories and how DEMOS outputs match the observed demographic trends. DEMOS is expected to enable longitudinal analysis in the context of ABMs and expand ABMs analyses relating to dynamic processes such as household-level vehicle transactions.

Demographic evolution↗

Reduction of ethanol yield from switchgrass infected with rust caused by Puccinia emaculata

Switchgrass ( Panicum virgatum ) is an important biofuel crop candidate thought to have low disease susceptibility. As switchgrass production becomes more prevalent, monoculture and production fields in close proximity to one another may increase the spread and severity of diseases such as switchgrass rust caused by the pathogen Puccinia emaculata . The objective of this research was to examine the impact of rust on ethanol yield in switchgrass. In 2010 and 2012, naturally infected leaves from field-grown Alamo and Kanlow in Knoxville, TN (2010, 2012) and Crossville, TN (2012) were visually categorized as exhibiting low, medium, or high disease based on the degree of chlorosis and sporulation. P. emaculata was isolated from each disease range to confirm infection. Samples from 2010 were acid/heat pretreated and subjected to two runs of simultaneous saccharification and fermentation (SSF) with Saccharomyces cerevisiae D 5 A to measure ethanol yield. Near-infrared spectroscopy (NIRS) was used to estimate ethanol yield for 2012 samples. SSF and NIRS data were analyzed separately using ANOVA. Disease level effects were significant within both models (P < 0.05) and both models explained a large amount of variation in ETOH (SSF: R 2 = 0.99, NIRS: R 2 = 0.99). In the SSF dataset, ethanol was reduced by 35 % in samples exhibiting medium disease symptoms and by 55 % in samples exhibiting high disease symptoms. In the NIRS dataset, estimated ethanol was reduced by 10 % in samples exhibiting medium disease symptoms and by 21 % in samples exhibiting high disease symptoms. Lastly, results indicate that switchgrass rust will likely have a negative impact on ethanol yield in switchgrass grown as a biofuel crop.

09 BIOMASS FUELS↗

Direct pore-level modeling of incompressible fluid flow in porous media

We present a dynamic particle-based model for direct pore-level modeling of incompressible viscous fluid flow in disordered porous media. The model is capable of simulating flow directly in three-dimensional high-resolution micro-CT images of rock samples. It is based on moving particle semi-implicit (MPS) method. We modify this technique in order to improve its stability for flow in porous media problems. Using the micro-CT image of a rock sample, the entire medium, i.e., solid and fluid, is discretized into particles. The incompressible Navier-Stokes equations are then solved for each particle using the MPS summations. The model handles highly irregular fluid-solid boundaries effectively. An algorithm to split and merge fluid particles is also introduced. To handle the computational load, we present a parallel version of the model that runs on distributed memory computer clusters. The accuracy of the model is validated against the analytical, numerical, and experimental data available in the literature. The validated model is then used to simulate both unsteady- and steady-state flow of an incompressible fluid directly in a representative elementary volume (REV) size micro-CT image of a naturally-occurring sandstone with 3.398 {mu}m resolution. We analyze the quality and consistency of the predicted flow behavior and calculate absolute permeability using the steady-state flow rate.

97 MATHEMATICS AND COMPUTING↗

Observations of Diurnal to Weekly Variations of Monoterpene-Dominated Fluxes of Volatile Organic Compounds from Mediterranean Forests: Implications for Regional Modeling

The Estate of Castelporziano (Rome, Italy) hosts many ecosystems representative of Mediterranean vegetation, especially holm oak and pine forests and dune vegetation. In this work, basal emission factors (BEFs) of biogenic volatile organic compounds (BVOCs) obtained by Eddy Covariance in a field campaign using a proton transfer reaction–time-of-flight–mass spectrometer (PTR-TOF-MS) were compared to BEFs reported in previous studies that could not measure fluxes in real-time. Globally, broadleaf forests are dominated by isoprene emissions, but these Mediterranean ecosystems are dominated by strong monoterpene emitters, as shown by the new BEFs. The original and new BEFs were used to parametrize the model of emissions of gases and aerosols from nature (MEGAN v2.1), and model outputs were compared with measured fluxes. Results showed good agreement between modeled and measured fluxes when a model was used to predict radiative transfer and energy balance across the canopy. We then evaluated whether changes in BVOC emissions can affect the chemistry of the atmosphere and climate at a regional level. MEGAN was run together with the land surface model (community land model, CLM v4.0) of the community earth system model (CESM v1.0). Finally, results highlighted that tropospheric ozone concentration and air temperature predicted from the model are sensitive to the magnitude of BVOC emissions, thus demonstrating the importance of adopting the proper BEF values for model parametrization.

Fares, Silvano↗

Toward UV models of kinetic mixing and portal matter. VI. A more complex dark matter sector?

Portal matter (PM), having both Standard Model (SM) and dark sector charges, can induce kinetic mixing between the 𝑈⁢(1) 𝐷 dark photon and the SM gauge fields at the 1-loop level offering an attractive mechanism by which light (≲1 GeV) thermal dark matter (DM) can interact with visible matter and obtain its observed relic density. In doing so, if the DM is fermionic, the CMB and other astrophysical observations inform us that it must be Majorana/pseudo-Dirac in nature to avoid velocity/temperature-independent 𝑠-wave annihilation to SM final states. How does this idea fit into a more UV-complete picture also including the SM interactions? There are some reasons to believe that at least a first step along this path may not lie too far away in energy due to the renormalization group equations running of the dark gauge coupling, which for a significant range of parameters, becomes nonperturbative at/before the ∼10’s of TeV energy range. This implies that 𝑈⁢(1) 𝐷 must become embedded in an asymptotically free, non-Abelian group, 𝐺 𝐷 , before this can occur. The breaking of this larger group then produces the masses for the PM and the additional gauge fields associated with 𝐺 𝐷 then can lead to new interactions between the SM and the dark sector. Following several bottom-up approaches, we have examined a set of distinctive and testable phenomenological features associated with this general setup, based upon a number of simplifying assumptions. Clearly, it behooves us to explore the impact of these specific assumptions on these predictions for the array of possible experimental tests of this class of models. In most past analyses it has been assumed that DM is a vectorlike, complex singlet under the group 𝐺 𝐷 . If this assumption is relaxed, the dark sector must be augmented by additional fermion(s) and the associated scalar fields needed to break the gauge symmetries while generating the needed Majorana-like mass terms for the DM. In this paper, we analyze the simplest extension of this kind wherein the DM lies in a vectorlike doublet of 𝐺 𝐷 , which we take to have the structure 𝑆⁢𝑈⁢(2) 𝐼 ×𝑈⁢(1) 𝑌 𝐼 as in earlier work, leading to new phenomenological implications. We find, for example, that given the current LHC search constraints on the masses of heavy gauge bosons, the production of these new dark states with large rates is unlikely to occur at colliders unless they are produced singly in 𝑔⁡𝑔 fusion or their pair production cross sections are resonantly enhanced. Here, we also find that an additional mechanism arises to generate hierarchal neutrino masses in such a setup.

Extensions of Higgs sector↗

Measuring the lifetime of trapped sleptons using the general purpose LHC detectors

In supergravity where the gravitino is the lightest supersymmetric particle, the next-to-lightest supersymmetric particle decays to the gravitino with a naturally long lifetime (10{sup 4}-10{sup 8} s). However, cosmological constraints favor charged slepton next-to-lightest supersymmetric particles with lifetimes below a year as the natural next-to-lightest supersymmetric particle candidate. For this scenario we report a method to accurately determine the slepton lifetime and supersymmetry cross section from observation of the decays of sleptons trapped in the material comprising the main detector (ATLAS, CMS). A measurement of the lifetime to 5% is possible after 3 yr at nominal luminosity and running conditions. This method is sensitive to the cosmologically preferred stau lifetime of {approx}37 days and does not require the use of ancillary trapping volumes or special LHC experiment initiated beam dump requirements.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Protective, Modular Wave Power Generation System

The concept of small wave energy conversion modules that can be built into large, scalable arrays, in the same vein as solar panels, has been developed. This innovation lends itself to an organic business and development model, and enables the use of large-run manufacturing technology to reduce system costs. The first prototype module has been built to full-scale, and tested in a laboratory wave channel. The device has been shown to generate electricity and dissipate wave energy. Improvements need to be made to the electrical generator and a demonstration of an array of modules should be made in natural conditions.

16 TIDAL AND WAVE POWER↗

On the possibility of a ridge current along the Hawaiian Islands

Four evenly spaced aircraft-deployed expendable bathythermograph and concurrent satellite advanced very high resolution radiometer (AVHRR) surveys were made over an extended areas during a 1-year period to observe possible ridge currents along the Hawaiian Islands predicted or hypothesized by other investigators. None of the surveys found extended currents running along the ridge. Instead, fields of energetic eddies were found, and a curious cusp-shaped sea surface temperature pattern was observed in two of the AVHRR fields. Apparent cyclonic currents around the island of Hawaii were also observed. We conclude that either ridge currents do not exist or that they exist but are intermittent (episodic) in nature or exist in a form more complicated than could be observed by this study.

Price, James Michael↗

Using the cFS Command and Data Dictionary (CCDD) to Automate Software Development on Habulous

Final paper is attached. The NASA developed Core Flight System (cFS) is a reusable software architecture that has been used on multiple spaceflight missions. By using this framework, missions are able to reuse code from other missions, as well as leverage deployment onto similar computer architectures (i.e. not "reinvent the wheel" on each new mission). The success in the cFS concept can be seen in the large number of projects using cFS at FSW-2018. The Habulous project is an Earth-based testbed, used for hardware and software that may one day be used on a future space habitat unit, with many participating groups from various NASA centers and aerospace organizations around the country. The distributed nature of the various teams mean that defining (and following) an interface definition is critical on the project. Additionally, since various groups use various types of computer hardware (32/64-bit, big/little endian, Linux/VxWorks/Windows) many additional complications exist in interfacing all the various components into a final integrated system. cFS is used on the majority the flight software (FSW) in running in Habulous. But some subsystems have elected to not use cFS, and use a software bridge (called SBN_lib) to interact with the other cFS nodes in Habulous. In order to most efficiently develop the FSW, a central database is used to define and store each message sent by cFS. A Command and Data Dictionary (CDD) is something nearly universal on spacecraft, but as a team we worked to develop the CDD before the SW development was complete, and not treat it like "as built" documentation. To manage the CDD, the cFS Command and Data Dictionary (CCDD) tool was chosen (available from NASA as open source software). The CCDD tool has successfully been used to automate/autocode a large amount of software used on Habulous, as we are hoping to use it to define even more items in the future (time-triggered Ethernet (TTE) network maps, CPU scheduling). Additionally, Habulous has been exploring the use of cFS on wildly heterogeneous CPUs, and how to coordinate all those various machines using/extending the software bus – network (SBN) application in cFS, as well as TTE to coordinate message passing between various synchronized machines. The major topics to be covered in the presentation are: (1) Updating to the CCSDS_v2 extended headers (and using CPU# as subsystem ID). (2) Managing all the message identification numbers for each cFS message sent/received on any of the various CPUs. (3) Using the CCDD information to automatically generate the C-header files that define the structure for all software bus (SB) commands/telemetry messages. (4) Using the CCDD to automatically generate XML Telemetry and Command Exchange (XTCE) files, which streams display production/integration/testing in a web based display architecture (5) Extending/customizing SBN to pass messages among computers on multiple networks. (6) Using "Protobetter" inside SBN to manage different endian-ness/architectures. (7) Using SBN_lib to allow non-cFS node to communicate with cFS nodes. (8) Developing TTE network and schedule tables for all the various CPUs to use.

Hirsh, Robert L.↗

High Temperature Ternary Chloride Molten Salt Pump

This work investigates the design criteria considering thermal, structural, and mate-rial selection of a ternary chloride (MgCl2-NaCl-KCl) molten salt pump that is capable of running at temperatures above 720 °C. In this work, preliminary testing of salt-wetted hydrodynamic bearings was done to investigate different material pairings including colmonoy grades, stellite grades, and a novel NiWC-based alloy (i.e. HybrimetTM NiWC3b) used as a High Velocity Ox-ygen Fuel (HVOF) coating. The coating has shown to withstand the corrosive nature of the salt, and is additionally used to protect a 316L stainless steel pump reservoir. The pump wetted components are made of Inconel 625, and it features a carbon ring seal developed by Flows-erve flooded with a N2 gas flow on the overhead to keep salt vapors from interacting with the external ambient air. This research showcases a promising design for use in the CSP Gen 3 liquid-pathway and sets the ground for further development and use of the HybrimetTM NiWC3b as a competitive alternative to available superalloys. Further work will further characterize the pump by performance & cycle testing in molten salt at higher temperatures.

14 SOLAR ENERGY↗

FABRICATION PROCESS AND PRODUCT QUALITY IMPROVEMENTS IN ADVANCED GAS REACTOR UCO KERNELS

A major element of the Advanced Gas Reactor (AGR) program is developing fuel fabrication processes to produce high quality uranium-containing kernels, TRISO-coated particles and fuel compacts needed for planned irradiation tests. The goals of the AGR program also include developing the fabrication technology to mass produce this fuel at low cost. Kernels for the first AGR test (“AGR-1) consisted of uranium oxycarbide (UCO) microspheres that werre produced by an internal gelation process followed by high temperature steps tot convert the UO3 + C “green” microspheres to first UO2 + C and then UO2 + UCx. The high temperature steps also densified the kernels. Babcock and Wilcox (B&W) fabricated UCO kernels for the AGR-1 irradiation experiment, which went into the Advance Test Reactor (ATR) at Idaho National Laboratory in December 2006. An evaluation of the kernel process following AGR-1 kernel production led to several recommendations to improve the fabrication process. These recommendations included testing alternative methods of dispersing carbon during broth preparation, evaluating the method of broth mixing, optimizing the broth chemistry, optimizing sintering conditions, and demonstrating fabrication of larger diameter UCO kernels needed for the second AGR irradiation test. Based on these recommendations and requirements, a test program was defined and performed. Certain portions of the test program were performed by Oak Ridge National Laboratory (ORNL), while tests at larger scale were performed by B&W. The tests at B&W have demonstrated improvements in both kernel properties and process operation. Changes in the form of carbon black used and the method of mixing the carbon prior to forming kernels led to improvements in the phase distribution in the sintered kernels, greater consistency in kernel properties, a reduction in forming run time, and simplifications to the forming process. Process parameter variation tests in both forming and sintering steps led to an increased understanding of the acceptable ranges for process parameters and additional reduction in required operating times. Another result of this test program was to double the kernel production rate. Following the development tests, approximately 40 kg of natural uranium UCO kernels have been produced for use in coater scale up tests, and approximately 10 kg of low enriched uranium UCO kernels for use in the AGR-2 experiment.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Experimental Programme at the Gran Sasso National Laboratory

I shall summarise the main characteristics of the INFN Laboratorio Internazionale del Gran Sasso (LNGS), including a few historical elements, and its research programme, considering both the running experiments and the projects under development. I shall then give a few details on the main experiments, their recent result and the perspectives for the future.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Risk Assessment of Carbon Sequestration into A Naturally Fractured Reservoir at Kevin Dome, Montana

In this report, we describe risk assessment work done using the National Risk Assessment Partnership (NRAP) applied to CO 2 storage at Kevin Dome, Montana. Geologic CO 2 sequestration in saline aquifers poses certain risks including CO 2 /brine leakage through wells or non-sealing faults into groundwater or to the land surface. These risks are difficult to quantify due to data availability and uncertainty. One solution is to explore the consequences of these limitations by running large numbers of numerical simulations on the primary CO2 injection reservoir, shallow reservoirs/aquifers, faults, and wells to assess leakage risks and uncertainties. However, a large number of full-physics simulations is usually too computationally expensive. The NRAP integrated assessment model (NRAP-IAM) uses reduced order models (ROMs) developed from full-physics simulations to address this issue. A powerful stochastic framework allows NRAPIAM to explore complex interactions among many uncertain variables and evaluate the likely performance of potential sequestration sites.

54 ENVIRONMENTAL SCIENCES↗

Technical Note: On the use of nudging for aerosol–climate model intercomparison studies

Nudging as an assimilation technique has seen increased use in recent years in the development and evaluation of climate models. Constraining the simulated wind and temperature fields using global weather reanalysis facilitates more straightforward comparison between simulation and observation, and reduces uncertainties associated with natural variabilities of the large-scale circulation. On the other hand, the forcing introduced by nudging can be strong enough to change the basic characteristics of the model climate. In the paper we show that for the Community Atmosphere Model version 5 (CAM5), due to the systematic temperature bias in the standard model and the sensitivity of simulated ice formation to anthropogenic aerosol concentration, nudging towards reanalysis results in substantial reductions in the ice cloud amount and the impact of anthropogenic aerosols on long-wave cloud forcing. In order to reduce discrepancies between the nudged and unconstrained simulations, and meanwhile take the advantages of nudging, two alternative experimentation methods are evaluated. The first one constrains only the horizontal winds. The second method nudges both winds and temperature, but replaces the long-term climatology of the reanalysis by that of the model. Results show that both methods lead to substantially improved agreement with the free-running model in terms of the top-of-atmosphere radiation budget and cloud ice amount. The wind-only nudging is more convenient to apply, and provides higher correlations of the wind fields, geopotential height and specific humidity between simulation and reanalysis. Results from both CAM5 and a second aerosol–climate model ECHAM6-HAM2 also indicate that compared to the wind-and-temperature nudging, constraining only winds leads to better agreement with the free-running model in terms of the estimated shortwave cloud forcing and the simulated convective activities. This suggests nudging the horizontal winds but not temperature is a good strategy for the investigation of aerosol indirect effects since it provides well-constrained meteorology without strongly perturbing the model's mean climate.

Zhang, K.↗