Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Nano structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Charge storage and tunneling mechanism of Ni nanocrystals embedded HfO{sub x} film

A nano-floating gate memory structure based on Ni nanocrystals (NCs) embedded HfO{sub x} film is deposited by means of radio-frequency magnetron sputtering. Microstructure investigations reveal that self-organized Ni-NCs with diameters of 4-8 nm are well dispersed in amorphous HfO{sub x} matrix. Pt/Ni-NCs embedded HfO{sub x}/Si/Ag capacitor structures exhibit voltage-dependent capacitance-voltage hysteresis, and a maximum flat-band voltage shift of 1.5 V, corresponding to a charge storage density of 6.0 × 10{sup 12} electrons/cm{sup 2}, is achieved. These capacitor memory cells exhibit good endurance characteristic up to 4 × 10{sup 4} cycles and excellent retention performance of 10{sup 5} s, fulfilling the requirements of next generation non-volatile memory devices. Schottky tunneling is proven to be responsible for electrons tunneling in these capacitors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Holographic grating relaxation technique for soft matter science

The holographic grating relaxation technique also known as forced Rayleigh scattering consists basically in writing a holographic grating in the specimen of interest and monitoring its diffraction efficiency as a function of time, from which valuable information on mass or heat transfer and photoinduced transformations can be extracted. In a more detailed view, the shape of the relaxation curve and the relaxation rate as a function of the grating period were found to be affected by the architecture of diffusing species (molecular probes) that constitute the grating, as well as that of the environment they diffuse in, thus making it possible to access and study spatial heterogeneity of materials and different modes of e.g., polymer motion. Minimum displacements and spatial domains approachable by the technique are in nanometer range, well below spatial periods of holographic gratings. In the present paper, several cases of holographic relaxation in heterogeneous media and complex motions are exemplified. Nano- to micro-structures or inhomogeneities comparable in spatial scale with holographic gratings manifest themselves in relaxation experiments via non-exponential decay (stepwise or stretched), spatial-period-dependent apparent diffusion coefficient, or unusual dependence of diffusion coefficient on molecular volume of diffusing probes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Light–matter interaction of a molecule in a dissipative cavity from first principles

Cavity-mediated light–matter coupling can dramatically alter opto-electronic and physico-chemical properties of a molecule. Ab initio theoretical predictions of these systems need to combine non-perturbative, many-body electronic structure theory-based methods with cavity quantum electrodynamics and theories of open-quantum systems. Here, we generalize quantum-electrodynamical density functional theory to account for dissipative dynamics of the cavity and describe coupled cavity–single molecule interactions in the weak-to-strong-coupling regimes. Specifically, to establish this generalized technique, we study excited-state dynamics and spectral responses of benzene and toluene under weak-to-strong light–matter coupling. By tuning the coupling, we achieve cavity-mediated energy transfer between electronically excited states. This generalized ab initio quantum-electrodynamical density functional theory treatment can be naturally extended to describe cavity-mediated interactions in arbitrary electromagnetic environments, accessing correlated light–matter observables and thereby closing the gap between electronic structure theory, quantum optics, and nanophotonics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dynamic X-ray diffraction imaging of the ferroelectric response in bismuth ferrite

Abstract X-ray diffraction imaging is rapidly emerging as a powerful technique by which one can capture the local structure of crystalline materials at the nano- and meso-scale. Here, we present investigations of the dynamic structure of epitaxial monodomain BiFeO 3 thin-films using a novel full-field Bragg diffraction imaging modality. By taking advantage of the depth penetration of hard X-rays and their exquisite sensitivity to the atomic structure, we imaged in situ and in operando, the electric field-driven structural responses of buried BiFeO 3 epitaxial thin-films in micro-capacitor devices, with sub-100 nm lateral resolution. These imaging investigations were carried out at acquisition frame rates that reached up to 20 Hz and data transfer rates of 40 MB/s, while accessing diffraction contrast that is sensitive to the entire three-dimensional unit cell configuration. We mined these large datasets for material responses by employing matrix decomposition techniques, such as independent component analysis. We found that this statistical approach allows the extraction of the salient physical properties of the ferroelectric response of the material, such as coercive fields and transient spatiotemporal modulations in their piezoelectric response, and also facilitates their decoupling from extrinsic sources that are instrument specific.

36 MATERIALS SCIENCE↗

Nanoparticle modifications of photodefined nanostructures for energy applications.

The advancement of materials technology towards the development of novel 3D nanostructures for energy applications has been a long-standing challenge. The purpose of this project was to explore photolithographically defineable pyrolyzed photoresist carbon films for possible energy applications. The key attributes that we explored were as follows: (1) Photo-interferometric fabrication methods to produce highly porous (meso, micro, and nano) 3-D electrode structures, and (2) conducting polymer and nanoparticle-modification strategies on these structures to provide enhanced catalytic capabilities and increase conductivity. The resulting electrodes were then explored for specific applications towards possible use in battery and energy platforms.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Final Report: Super Instruction Architecture for Scalable Parallel Computations

The most advanced methods for reliable and accurate computation of the electronic structure of molecular and nano systems are the coupled-cluster techniques. These high-accuracy methods help us to understand, for example, how biological enzymes operate and contribute to the design of new organic explosives. The ACES III software provides a modern, high-performance implementation of these methods optimized for high performance parallel computer systems, ranging from small clusters typical in individual research groups, through larger clusters available in campus and regional computer centers, all the way to high-end petascale systems at national labs, including exploiting GPUs if available. This project enhanced the ACESIII software package and used it to study interesting scientific problems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optical Spectroscopy and Scanning Tunneling Microscopy Studies of Molecular Adsorbates and Anisotropic Ultrathin Films

The goal of the research under this project was to develop sufficient fundamental understanding to allowthe controlled preparation of nano-, and meso-structured surfaces with novel optical propertiesand chemical reactivity. The research placed an emphasis on the synthesis of, sometimes complex, surface structures under conditions that allow for detailed control and understanding of the composition and structure and the subsequent relationship to properties and chemical reactivity. In this research we utilized a combination of optical probes (Polarization and angle dependent laser reflectivity and Laser Raman Scattering) with modern surface imaging experiments (electron microscopy (SEM, TEM), and variable temperature ultra high vacuum scanning tunneling microscopy (STM)). These experiments were combined with conventional methods of UHV surface science (High Resolution Electron Energy Loss Vibrational Spectroscopy (HREELS), Auger electron spectroscopy (AES), x-ray photoelectron spectroscopy (XPS) and thermal desorption spectroscopy (TDS)). The conventional surface probes provide well-tested methods for the preparation and characterization of substrates. The optical probes used provided powerful methods for the characterization of the structure dependent optical properties of novel molecular and nanometer scale, and mesoscale surface structures as well as molecular identification and quantification of adsorbates in monolayers and ultrathin films. A combination of STM and SEM/TEM were utilized to study the growth of mesoscopically ordered nanometer sized metal and metal oxide structures on well-defined substrates such as highly ordered pyrolytic graphite (HOPG). We developed methods (e.g.photoelectrochemical deposition) to decorate nanometer scale metal oxide structures with transition metal nanoparticles generating Nanoparticles on Nanoscale substrate materials (NpNs). The electronic structure and chemical properties of these new structures were studied and contrasted with those of the more conventional nanoparticles on macroscopic substrate materials.

36 MATERIALS SCIENCE↗

Final report : CO2 reduction using biomimetic photocatalytic nanodevices.

Nobel Prize winner Richard Smalley was an avid champion for the cause of energy research. Calling it 'the single most important problem facing humanity today,' Smalley promoted the development of nanotechnology as a means to harness solar energy. Using nanotechnology to create solar fuels (i.e., fuels created from sunlight, CO{sub 2}, and water) is an especially intriguing idea, as it impacts not only energy production and storage, but also climate change. Solar irradiation is the only sustainable energy source of a magnitude sufficient to meet projections for global energy demand. Biofuels meet the definition of a solar fuel. Unfortunately, the efficiency of photosynthesis will need to be improved by an estimated factor of ten before biofuels can fully replace fossil fuels. Additionally, biological organisms produce an array of hydrocarbon products requiring further processing before they are usable for most applications. Alternately, 'bio-inspired' nanostructured photocatalytic devices that efficiently harvest sunlight and use that energy to reduce CO{sub 2} into a single useful product or chemical intermediate can be envisioned. Of course, producing such a device is very challenging as it must be robust and multifunctional, i.e. capable of promoting and coupling the multi-electron, multi-photon water oxidation and CO{sub 2} reduction processes. Herein, we summarize some of the recent and most significant work towards creating light harvesting nanodevices that reduce CO{sub 2} to CO (a key chemical intermediate) that are based on key functionalities inspired by nature. We report the growth of Co(III)TPPCl nanofibers (20-100 nm in diameter) on gas diffusion layers via an evaporation induced self-assembly (EISA) method. Remarkably, as-fabricated electrodes demonstrate light-enhanced activity for CO{sub 2} reduction to CO as evidenced by cyclic voltammograms and electrolysis with/without light irradiation. To the best of our knowledge, it is the first time to observe such a light-enhanced CO{sub 2} reduction reaction based on nanostructured cobalt(III) porphyrin catalysts. Additionally, gas chromatography (GC) verifies that light irradiation can improve CO production by up to 31.3% during 2 hours of electrolysis. In addition, a variety of novel porphyrin nano- or micro-structures were also prepared including nanospheres, nanotubes, and micro-crosses.

14 SOLAR ENERGY↗

Demixing by a Nematic Mean Field: Coarse-Grained Simulations of Liquid Crystalline Polymers

Liquid crystalline polymers exhibit a particular richness of behaviors that stems from their rigidity and their macromolecular nature. On the one hand, the orientational interaction between liquid-crystalline motifs promotes their alignment, thereby leading to the emergence of nematic phases. On the other hand, the large number of configurations associated with polymer chains favors formation of isotropic phases, with chain stiffness becoming the factor that tips the balance. In this work, a soft coarse-grained model is introduced to explore the interplay of chain stiffness, molecular weight and orientational coupling, and their role on the isotropic-nematic transition in homopolymer melts. We also study the structure of polymer mixtures composed of stiff and flexible polymeric molecules. We consider the effects of blend composition, persistence length, molecular weight and orientational coupling strength on the melt structure at the nano-and mesoscopic levels. Conditions are found where the systems separate into two phases, one isotropic and the other nematic. We confirm the existence of non-equilibrium states that exhibit sought-after percolating nematic domains, which are of interest for applications in organic photovoltaic and electronic devices.

Ramírez-Hernández, Abelardo↗

Experimental Shock Decomposition of Siderite and the Origin of Magnetite in Martian Meteorite ALH84001

Shock recovery experiments to determine whether magnetite could be produced by the decomposition of iron-carbonate were initiated. Naturally occurring siderite was first characterized by electron microprobe (EMP), transmission electron microscopy (TEM), Mossbauer spectroscopy, and magnetic susceptibility measurements to be sure that the starting material did not contain detectable magnetite. Samples were shocked in tungsten-alloy holders (W=90%, Ni=6%, Cu=4%) to further insure that any iron phases in the shock products were contributed by the siderite rather than the sample holder. Each sample was shocked to a specific pressure between 30 to 49 GPa. Previously reported results of TEM analyses on 49 GPa experiments indicated the presence of nano-phase spinel-structured iron oxide. Transformation of siderite to magnetite as characterized by TEM was found in the 49 GPa shock experiment. Compositions of most magnetites are greater than 50% Fe sup(+2) in the octahedral site of the inverse spinel structure. Magnetites produced in shock experiments display the same range of single-domain, superparamagnetic sizes (approx. 50 100 nm), compositions (100% magnetite to 80% magnetite-20% magnesioferrite), and morphologies (equant, elongated, euhedral to subhedral) as magnetites synthesized by Golden et al. (2001) or magnetites grown naturally by MV1 magnetotactic bacteria, and as the magnetites in Martian meteorite ALH84001. Fritz et al. (2005) previously concluded that ALH84001 experienced approx. 32 GPa pressure and a resultant thermal pulse of approx. 100 - 110 C. However, ALH84001 contains evidence of local temperature excursions high enough to 1 melt feldspar, pyroxene, and a silica-rich phase. This 49 GPa experiment demonstrates that magnetite can be produced by the shock decomposition of siderite as a result of local heating to greater than 470 C. Therefore, magnetite in the rims of carbonates in Martian meteorite ALH84001 could be a product of shock devolatilization of siderite as well.

Bell, Mary Sue↗

The Potential for a Ka-band (32 GHz) Worldwide VLBI Network

Ka-band (32 GHz, 9mm) Very Long Baseline Interferometric (VLBI) networking has now begun and has tremendous potential for expansion over the next few years. Ka-band VLBI astrometry from NASA's Deep Space Network has already developed a catalog of 470 observable sources with highly accurate positions. Now, several antennas worldwide are planning or are considering adding Ka-band VLBI capability. Thus, there is now an opportunity to create a worldwide Ka-band network with potential for high resolution imaging and astrometry. With baselines approaching a Giga-lambda, a Ka-band network would be able to probe source structure at the nano-radian (200 as) level ( 100X better than Hubble) and thus gain insight into the astrophysics of the most compact regions of emission in active galactic nuclei. We discuss the advantages of Ka-band, show the known sources and candidates, simulate projected baseline (uv) coverage, and discuss potential radio frequency feeds. The combination of these elements demonstrates the feasibility of a worldwide Ka network within the next few years!

quasar↗

CO Oxidation at the Interface of Au Nanoclusters and the Stepped-CeO2(111) Surface

To reveal the richer chemistry of CO oxidation by CeO2 supported Au Nanoclusters NCs)/Nanoparticles, we design a Au12 supported on a stepped-CeO2 model (Au/CeO2-step) and study various kinds of CO oxidation mechanisms at the interface of the Au/CeO2-step: oxygen spillover from the CeO2 to the Au NCs;2 CO oxidation by the O2 bound to the Au-Ce3+ interface;3 and CO oxidation by the Mars-van Krevelen (M-vK) mechanism.4 DFT+U calculations show that lattice oxygen at the CeO2 step edge oxidizes CO bound to Au NCs by the M-vK mechanism. CO2 desorption determines the rate of CO oxidation and the vacancy formation energy (Evac) is a reactivity descriptor for CO oxidation. The maximum Evac that insures spontaneous CO2 production is higher for the Au/CeO2-step than the Au/CeO2-surface suggesting that the CeO2-step is a better supporting material than the CeO2-surface for CO oxidation by the Au/CeO2. Our results also suggest that for CO oxidation by Au NCs supported on nano- or meso-structured CeO2, which is the case of industrial catalysts, the M-vK mechanism accounts for a large portion of the total activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Method for making metal-carbon composites and compositions

A method for making covetic metal-carbon composites or compositions by electron beam melt heating under vacuum (pressure <10−3 Torr) is described herein. This fabrication method is advantageous, in that it provides oxygen-free covetic materials in a process that allows precise control of the composition of the covetic material to be produced. The method described herein also can be applied to produce multi-element-carbon composites within a metal or alloy matrix, including high melting temperature materials such as ceramic particles or prefabricated nano- or micro-structures, such as carbon nanotubes or graphene compounds. The covetic reaction between metal and carbon takes place under the influence of flowing electrons through the melted metal-carbon precursor. This process creates strong bonding between nanocarbon structure and the metal elements in the melt.

36 MATERIALS SCIENCE↗

Nano-Particle Enhanced Polymer Materials for Space Flight Applications

Recent advances in materials technology both in polymer chemistry and nano-materials warrant development of enhanced structures for space flight applications. This work aims to develop spacecraft structures based on polymer matrix composites (PMCs) that utilize these advancements.. Multi-wall carbon nano-tubes (MWCNTs) are expected ·to increase mechanical performance, lower coefficient of thermal expansion (CTE), increase electrical conductivity (mitigate electrostatic charge), increase thermal conductivity, and reduce moisture absorption of the resultant space structures. In this work, blends of MWCNTs with PETI-330 were prepared and characterized. The nano-reinforced resins were then resin transfer molded (RTM) into composite panels using M55J carbon fabric and compared to baseline panels fabricated from a cyanate ester (RS-3) or a polyimide (PETI-330) resin containing no MWCNTs. In addition, methods of pre-loading the fabric with the MWCNTs were also investigated. The effects of the MWCNTs on the resin processing properties and on the composite end-use properties were also determined.

Criss, Jim M., Jr.↗

RE/ZrO{sub 2} (RE = Sm, Eu) composite oxide nano-materials: Synthesis and applications in photocatalysis

Graphical abstract: - Highlights: • RE/ZrO{sub 2} (RE = Sm, Eu) nano-materials have been successfully synthesized. • Defect and electron structures determine the absorption properties on visible light. • Nano-sized Zr{sub 0.8}Sm{sub 0.2}O{sub 2−δ} has good visible-light-responsive photocatalytic activities. • In the future, it can be used in wastewater treatment and environmental protection. - Abstract: Zirconia modified by Samarium/Europium, RE/ZrO{sub 2} (RE = Sm, Eu), composite oxide nano-materials have been successfully synthesized by improved sol–gel method. Characterization results show that X-ray diffraction (XRD) peaks of products gradually shift to the lower angle with the increase of rare earth which implies that the lattice distances of RE/ZrO{sub 2} nano-materials are gradually enlarged. Moreover, the molar ratios between zirconium and rare earth are consistent with the chemical formula and both of them are uniformly distributed in samples. Optical properties indicate that defect structures and electron configurations of RE/ZrO{sub 2} (RE = Sm, Eu) with single phase determine their absorption properties on visible light. Photocatalytic experiments indicate Zr{sub 0.8}Sm{sub 0.2}O{sub 2−δ} nano-crystals have excellent visible-light-responsive photocatalytic activities on Methylene blue and Rhodamine B which results from the special defect structure, suitable electronic configuration, and larger specific surface area. It follows that Zr{sub 0.8}Sm{sub 0.2}O{sub 2−δ} nano-crystals are new visible-light-responsive photocatalysts which can be applied in dye wastewater treatment and environmental protection in the future.

36 MATERIALS SCIENCE↗

Metal Oxide Nano-Array Catalysts for Low Temperature Diesel Oxidation. Final Report

In this project, a series of metal oxide nanostructure arrays (nano-arrays) with or without metal decoration, have been successful integrated onto monolithic honeycombs with well-defined size, shape, and chemical compositions, forming a new type of monolithic catalysts. These catalysts have displayed good durability and catalytic performance toward various gas phase catalytic reactions, while showing good potential of reducing the material usage. Specifically in situ grown onto monolithic honeycomb substrates, the metal oxide nanostructure arrays (nano-arrays) (e.g., CeO 2 , Co 3 O 4 , (Cu, Mn)O 2 , (La, Sr)MnO 3 , TiO 2 , etc.), with or without Pt-group metal (PGM) decoration, have displayed good durability and catalytic performance toward catalytic oxidation of hydrocarbons and CO, while showing good potential of reducing the material (noble metal and metal oxides) usage. As unique supports, the nano-array ‘forest-like’ structure configuration proves to improve the dispersion and immobilization of metal nanocatalysts under various aging and reactive conditions, besides the lower pressure drop and improved adherence to the monolith substrates over wash-coated catalysts. On the other hand, electronic interactions between metals and nano-array support are found to be adjustable toward favoring catalytic oxidation while improving the catalyst robustness. Furthermore, chemical leaching treatment in these metal oxide based catalysts could help tune their chemical and structural characteristics, boosting low temperature oxidation reactivity while maintaining robustness. Both CeO 2 and TiO 2 nano-array supported PGM catalysts have shown promising low temperature reactivity with 90% conversion at temperatures approaching 150oC toward CO, HC, and NO x oxidation under both probe and simulated exhaust conditions.

36 MATERIALS SCIENCE↗

A transmission Kikuchi diffraction study of cementite in a quenched and tempered steel

This is the first transmission Kikuchi diffraction (TKD) study to report the indexing of nano-sized cementite as distinct structures and its orientation relationship with the body-centered cubic matrix in a quenched and tempered steel. Crystallographic analysis via TKD and selected area diffraction returned the well-known Bagaryatskii and Isaichev orientation relationships. However, the indexing of nano-sized cementite via TKD was sensitive to the thickness of the electron transparent region such that TEM remains the most precise method to characterise such precipitates. - Highlights: • Nano-sized cementite in a QT steel has been investigated by TKD and TEM. • Cementite has been indexed as distinct structures via TKD. • Crystallographic analysis returned the Bagaryatskii and Isaichev ORs. • Success of TKD is sensitive to the thickness of the electron transparent region. • TEM remains the most precise technique to characterise nano-sized precipitates.

36 MATERIALS SCIENCE↗

Interfacial Atomistic Mechanisms of Lithium Metal Stripping and Plating in Solid–State Batteries

All-solid-state batteries based on a Li metal anode represent a promising next-generation energy storage system, but are currently limited by low current density and short cycle life. Further research to improve the Li metal anode is impeded by the lack of understanding in its failure mechanisms at lithium–solid interfaces, in particular, the fundamental atomistic processes responsible for interface failure. Here, using large-scale molecular dynamics simulations, the first atomistic modeling study of lithium stripping and plating on a solid electrolyte is performed by explicitly considering key fundamental atomistic processes and interface atomistic structures. In the simulations, the interface failure initiated with the formation of nano-sized pores, and how interface structures, lithium diffusion, adhesion energy, and applied pressure affect interface failure during Li cycling are observed. By systematically varying the parameters of solid-state lithium cells in the simulations, the parameter space of applied pressures and interfacial adhesion energies that inhibit interface failure during cycling are mapped to guide selection of solid-state cells. Furthermore, this study establishes the atomistic modeling for Li stripping and plating, and predicts optimal solid interfaces and new strategies for the future research and development of solid-state Li-metal batteries.

25 ENERGY STORAGE↗