Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Multilayer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Correspondence Between Magnetoresistance and Magnetization in Co/Cu Multilayers Studied at Higher Spacer Layer Thickness

A series of [Cu(t{sub Cu})/Co(25 A)]{sub 25} multilayers at higher spacer layer thickness have been deposited by dc magnetron sputtering. Magnetoresistance (MR) measurements have been carried out at different temperatures. MR curves showed hysteresis by displaying peaks at magnetic field H{sub p}. The field values exhibiting the maximum resistance in the magnetoresistance curve (H{sub p}) were greater than the coercivity (H{sub c}). The correspondence between the shape of the MR curve and that of the magnetization curve has been established and observed peak splitting in MR curves is attributed to a hardening in the magnetization reversal of some magnetic grains.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effective work function lowering of multilayer graphene films by subnanometer thick AlO{sub x} overlayers

A simple method for controlling the effective work function (WF) of conductive multilayer graphene (MLG) film, synthesized by using chemical vapor deposition and transferred to a dielectric substrate, was developed. The WFs of the MLG during the step-by-step deposition of aluminum (Al) were measured using in situ ultraviolet photoelectron spectroscopy. Core-level spectra were also collected to investigate the chemical reaction that occurred when a small amount of Al was deposited onto MLG in a stepwise manner. The measurements revealed that the effective WF of the conductive MLG film could be controlled from 3.77 to 4.40 eV by the deposition of an Al layer less than 0.6 nm thick.

36 MATERIALS SCIENCE↗

Optimization and Characterisation of Amorphous Iron Disilicide formed by Ion Beam Mixing of Fe/Si Multilayer Structures for Photovoltaic Applications

This study presents an optimization and characterization of amorphous Iron Disilicide (a-FeSi{sub 2}) synthesized using Ion Beam Mixing (IBM) of Fe/Si multilayer structures. The layers were deposited using RF magnetron sputtering, and subsequently irradiated with Ar{sup +} and Fe{sup +} beams of 150 and 200 keV. Rutherford Back Scattering (RBS) analysis was used to determine the structure and level of silicidation of the samples. The nature of the band-gap and the optical absorption coefficients were determined by optical transmission analysis. The results demonstrate that the synthesis of a-FeSi{sub 2} can be achieved using this technique, with the total level of silicidation being highly dependant upon the initial structure configuration and beam parameters. Direct band-gap energies of {approx}0.90 eV have been observed for those samples with the highest levels of silicidation, with optical absorption coefficients of {approx}10{sup 4} cm{sup -1}. Therefore this method of fabrication has been shown to produce a-FeSi{sub 2} layers without the need for post-synthesis treatment, using established technologies without compromising the optical properties that make this material such a promising semiconductor for the photovoltaics market.

36 MATERIALS SCIENCE↗

Growth of multilayers of Bi{sub 2}Se{sub 3}/ZnSe: Heteroepitaxial interface formation and strain

Multilayers of Bi{sub 2}Se{sub 3}/ZnSe with the periodicity of a few nanometers were grown by molecular-beam epitaxy on Si(111). While epitaxial growth of Bi{sub 2}Se{sub 3} on ZnSe proceeded by two-dimensional nucleation, ZnSe growth on Bi{sub 2}Se{sub 3} showed the three-dimensional growth front. Therefore, the two complementary interfaces of Bi{sub 2}Se{sub 3}/ZnSe were asymmetric in morphological properties. Strain-relaxation rates were found to differ between epitaxial ZnSe and Bi{sub 2}Se{sub 3}, which could be attributed to the specific growth modes and the properties of Bi{sub 2}Se{sub 3} and ZnSe surfaces.

36 MATERIALS SCIENCE↗

Microwave assisted magnetization switching in Co/Pt multilayer

In this study, we have experimentally investigated the microwave assisted magnetization by switching (MAS) on the microstructured Co/Pt multilayer. The sample exhibits the typical magnetization curve peculiar to perpendicular anisotropy films, that is, a steep reversal initiated by nucleation of a reversed domain followed by its subsequent gradual expansion by the domain wall displacement. By applying microwaves with the frequency of GHz order, the nucleation field H{sub n} is significantly reduced at three frequencies. Taking into account the effective anisotropy field of our sample, the first dip of H{sub n} at the lowest frequency probably corresponds to the Kittel mode excitation, and the other two dips at higher frequencies correspond to unidentified excitation modes other than the Kittel mode. Among them, the last dip of H{sub n} at the highest frequency reaches about 1/3 of that without microwave application. These results suggest the existence of more effective excitation modes for MAS than the Kittel mode.

36 MATERIALS SCIENCE↗

Adsorption of ammonia on multilayer iron phthalocyanine

The adsorption of ammonia on multilayers of well-ordered, flat-lying iron phthalocyanine (FePc) molecules on a Au(111) support was investigated by x-ray photoelectron spectroscopy. We find that the electron-donating ammonia molecules coordinate to the metal centers of iron phthlalocyanine. The coordination of ammonia induces changes of the electronic structure of the iron phthalocyanine layer, which, in particular, lead to a modification of the FePc valence electron spin.

36 MATERIALS SCIENCE↗

Observation of continuous and reversible bcc-fcc phase transformation in Ag/V multilayers

A continuous and reversible bcc-fcc phase transformation via a rotation of bcc(110) or fcc(111) planes is observed in the Bain orientation relationship in a sputter deposited V/Ag multilayers using high resolution transmission electron microscopy and analyzed using molecular dynamics simulations. As a result of the continuous phase transformation, an intermediate bct phase connecting the bcc and fcc phases coexists, giving rise to the Bain path. The periodic displacement of atoms occurs in every two adjacent Ag and V layers. The alternating shear stress created by misfit strain is responsible for generating such transformation.

36 MATERIALS SCIENCE↗

Electron beam-induced nanopatterning of multilayer graphene and amorphous carbon films with metal layers

Thin Co and Ni lamellae grow under electron irradiation of metal crystals supported on multilayer graphene or amorphous carbon films. The lateral growth of a lamella from a source crystal is achieved by directing an electron beam to the periphery of the metal crystal and moving the beam over the surrounding carbon. Patterns of linear, branched, or ringlike metal lamellae can be created. The patterning is carried out in situ in a transmission electron microscope, allowing simultaneous structuring and imaging. The process is driven by the metal-carbon interaction at a beam-activated carbon surface.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Mixing Of Mode Symmetries In Top Gated Bilayer And Multilayer Graphene Field Effect Devices

We report Raman study to investigate the influence of stacking on the inversion symmetry breaking in top gated bi- and multi-layer ({approx}10 layers) graphene field effect transistors. The G phonon mode splits into a low frequency (G{sub low}) and a high frequency (G{sub high}) mode in bi- and multi-layer graphene and the two modes show different dependence on doping. The mode splitting is explained in terms of mixing of zone-center in-plane optical phonons representing in-phase and out-of-phase inter-layer atomic motions. Unlike in bilayer graphene, there is no transfer of intensity from G{sub low} to G{sub high} in multilayer graphene. A comparison is made for the bilayer graphene data with the recent theory of Gava et al. [Phys. Rev. B 80, 155422 (2009)].

36 MATERIALS SCIENCE↗

MOKE Study of Fe/Co/Al Multilayers

The multilayer system (MLS)-[{sup 57}Fe{sub 25}A/Co{sub 11}A/Al{sub 17}A]x20 has been deposited by Ion beam sputtering (IBS) technique. The MLS has been annealed at 700 deg. C for 1 h. Overall composition of as deposited and annealed MLS have been characterized by EDX and magnetic properties have been studied through angular dependent magneto optic Kerr effect (MOKE) hysteresis curves. The study shows that the as-deposited MLS has excellent soft magnetic properties coupled with perpendicular magnetic isotropy which is destroyed on annealing.

36 MATERIALS SCIENCE↗

Multilayer-Based Optics for High-Brightness X-ray Sources

High-brightness x-ray sources, such as next-generation synchrotrons and free-electron lasers (FELs), pose unique challenges for the development of x-ray optics. The peak intensities of FEL pulses can be high enough to convert any material placed in a focused beam into plasma. X-ray optics, which are used close to the focal spot, are likely to be partially or completely damaged in a single shot. Such optics would need to be replenished after each shot. Optics that are used in the unfocused or indirect beam may survive much longer, perhaps indefinitely, if care is used to limit the energy absorbed in the optics. Here we present different types of multilayer-based optics, which were used successfully in FEL experiments for reflecting, focusing, and filtering high-intensity, pulsed x-rays in a variety of novel science applications.

07 ISOTOPE AND RADIATION SOURCES↗

Ion-beam mixing in crystalline and amorphous germanium isotope multilayers

Gallium (Ga) implantation induced self-atom mixing in crystalline and amorphous germanium (Ge) is investigated utilizing isotopically controlled Ge multilayer structures grown by molecular beam epitaxy. The distribution of the Ga ions and the ion-beam induced depth-dependent mixing of the isotope structure was determined by means of secondary ion mass spectrometry. Whereas the distribution of Ga in the crystalline and amorphous Ge is very similar and accurately reproduced by computer simulations based on binary collision approximation (BCA), the ion-beam induced self-atom mixing is found to depend strongly on the state of the Ge structure. The experiments reveal stronger self-atom mixing in crystalline than in amorphous Ge. Atomistic simulations based on BCA reproduce the experimental results only when unphysically low Ge displacement energies are assumed. Analysis of the self-atom mixing induced by silicon implantation confirms the low displacement energy deduced within the BCA approach. This demonstrates that thermal spike mixing contributes significantly to the overall mixing of the Ge isotope structures. The disparity observed in the ion-beam mixing efficiency of crystalline and amorphous Ge indicates different dominant mixing mechanisms. We propose that self-atom mixing in crystalline Ge is mainly controlled by radiation enhanced diffusion during the early stage of mixing before the crystalline structure turns amorphous, whereas in an already amorphous state self-atom mixing is mediated by cooperative diffusion events.

36 MATERIALS SCIENCE↗

Influence of Al/CuO reactive multilayer films additives on exploding foil initiator

An investigation on the influence of Al/CuO reactive multilayer films (RMFs) additives on exploding foil initiator was performed in this paper. Cu film and Cu/Al/CuO RMFs were produced by using standard microsystem technology and RF magnetron sputtering technology, respectively. Scanning electron microscopy characterization revealed the distinct layer structure of the as-deposited Al/CuO RMFs. Differential scanning calorimetry was employed to ascertain the amount of heat released in the thermite reaction between Al films and CuO films, which was found to be 2024 J/g. Electrical explosion tests showed that 600 V was the most matching voltage for our set of apparatus. The explosion process of two types of films was observed by high speed camera and revealed that compared with Cu film, an extra distinct combustion phenomenon was detected with large numbers of product particles fiercely ejected to a distance of about six millimeters for Cu/Al/CuO RMFs. By using the atomic emission spectroscopy double line technique, the reaction temperature was determined to be about 6000-7000 K and 8000-9000 K for Cu film and Cu/Al/CuO RMFs, respectively. The piezoelectricity of polyvinylidene fluoride film was employed to measure the average velocity of the slapper accelerated by the explosion of the films. The average velocities of the slappers were calculated to be 381 m/s and 326 m/s for Cu film and Cu/Al/CuO RMFs, respectively, and some probable reasons were discussed with a few suggestions put forward for further work.

36 MATERIALS SCIENCE↗

Structural and morphological characterization of molecular beam epitaxy grown Si/Ge multilayer using x-ray scattering techniques

Si/Ge multilayers are of great technological importance as is evident from the research studies of the past two decades. Here, we have presented a method for the morphological and structural characterization of such MBE grown epitaxial Si/Ge superlattice structures using simultaneous analysis of x-ray reflectivity and x-ray diffraction data, respectively. The consistent analysis of the data collected in the Indian Beamline at Photon Factory Synchrotron have allowed for the determination of electron density and strain profile as a function of depth.

36 MATERIALS SCIENCE↗

X-ray radiation effects in multilayer epitaxial graphene

We characterize multilayer graphene grown on C-face SiC before and after exposure to a total ionizing dose of 12 Mrad(SiO{sub 2}) using a 10 keV x-ray source. While we observe the partial peeling of the top graphene layers and the appearance of a modest Raman D-peak, we find that the electrical characteristics (mobility, sheet resistivity, free carrier concentration) of the material are mostly unaffected by radiation exposure. Combined with x-ray photoelectron spectroscopy data showing numerous carbon-oxygen bonds after irradiation, we conclude that the primary damage mechanism is through surface etching from reactive oxygen species created by the x-rays.

36 MATERIALS SCIENCE↗

Effect of the number of interfaces on the magnetic properties of [SnO{sub 2}/Cu-Zn ferrite] multilayer

The [SnO{sub 2}/Cu-Zn ferrite (CZF)]{sub n} (n = 5, 10, 15, and 20) multilayer (ML) were deposited by rf-magnetron sputtering to study their magnetic properties. The magnetization and ferromagnetic resonance (FMR) measurements were undertaken to understand the effect of interfaces on the magnetic properties of these ML. FMR signal line shape changes from asymmetric to symmetric as n increases. The FMR signal peak to peak intensity, FMR linewidth, effective and saturation magnetization and coercivity exhibit oscillations as a function of n. In the parallel configuration the resonance field increases with increase in n, presumably due to the decrease in the active layer to dead layer thickness ratio. The interlayer coupling is strong in the ML with n = 5 leading to the formation of spin waves. The ML interlayer coupling and anisotropy decreases with increasing n. The oscillatory behavior of the magnetic properties can be ascribed to the nonmonotonic variations in the structure and the geometry of the interfaces.

36 MATERIALS SCIENCE↗

Circular multilayer zone plate for high-energy x-ray nano-imaging

A circular multilayer zone plate (MZP) was fabricated and its focusing performance was evaluated using 20-keV x-rays. MoSi{sub 2} and Si layers were alternately deposited by DC magnetron sputtering on a wire core; all the interfaces satisfied the Fresnel zone condition. The measured line spread function was converted to a point spread function by tomographic reconstruction. The results suggest that the MZP has the potential to realize the diffraction-limited resolving power, which is calculated to be 35 nm using the diffraction integral. Furthermore, scanning transmission microscopy using the MZP could resolve a 50-nm line-and-space pattern.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A combined Kirkpatrick-Baez mirror and multilayer lens for sub-10 nm x-ray focusing

We have used a combined optical system of a high gain elliptic Kirkpatrick-Baez mirror system (KB) and a multilayer Laue lens (MLL) positioned in the focal plane of the KB for hard x-rays nano-focusing. The two-step focusing scheme is based on a high acceptance and high gain elliptical mirror with moderate focal length and a MLL with ultra-short focal length. Importantly, fabrication constraints, i.e. in mirror polishing and bending, as well as MLL deposition can be significantly relaxed, since (a) the mirror focus in the range of 200-500 nm is sufficient, and (b) the number of layers of the MLL can be correspondingly small. First demonstrations of this setup at the coherence beamline of the PETRA III storage ring yield a highly divergent far-field diffraction pattern, from which the autocorrelation function of the near-field intensity distribution was obtained. The results show that the approach is well suited to reach smallest spot sizes in the sub-10nm range at high flux.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗