SEARCH · Engineering Papers

Results for “Mixture separation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

All sources NASA NTRS DOE OSTI

DOE OSTI2022

Na + -gated nanochannel membrane for highly selective ammonia (NH 3 ) separation in the Haber-Bosch process

Currently, cryogenic condensation is the predominant process for recovering ammonia (NH 3 ) in the Haber-Bosch (HB) process, which is highly energy intensive. To be more compatible with the reaction conditions in the HB process and thus minimize the pressure and temperature swing during reactant recycling, energy-efficient technologies for NH 3 extraction at elevated temperature and pressure are greatly needed. In this work, the Na + -gated nanochannel membrane, shown exclusively for water conduction in our previous work, also exhibited highly NH 3 -selective performance, with NH 3 /H 2 selectivity as high as 4,280 and NH 3 /N 2 selectivity > 10,000 at temperature up to 250 °C and pressure up to 35 bar. Excellent stability of the Na + -gated nanochannel membrane was demonstrated during a 100-h run in ternary NH 3 /H 2 /N 2 gas mixture at 200 °C and 35 bar, consistent with structural characterization by X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and Fourier transfer infrared (FTIR) spectroscopy. A techno-economic analysis (TEA) was conducted for the HB process using the Na + -gated nanochannel membrane and the traditional HB process with condenser. Finally, under the optimized separation conditions, > 80% energy savings and approximately 20% reduction of the net NH 3 production cost can be achieved, demonstrating the great potential of the Na + -gated nanochannel membrane for NH 3 separation in the HB process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Microphase Separation in Polyelectrolyte Blends: Weak Segregation Theory and Relation to Nuclear "Pasta".

We develop the weak segregation theory of micro phase separation in stoichiometric blends of oppositely and weakly charged polyelectrolytes, which would be immiscible in the absence of charged units. Short-range repulsions between polycation and polyanion monomers induce the formation of oppositely charged domains, the size of which is controlled by their excess Coulomb energy. The diagram of blend morphologies is constructed in the framework of Leibler's mean-field approach and to account for fluctuations within the Brazovskii-Fredrickson-Helfand approximation. Phase behavior of the polyelectrolyte blends is fully analogous to that of neutral diblock copolymers. The mean-field analysis predicts that the order-disorder transition (ODT) is second order for the symmetric blend. In asymmetric mixtures, an increasing incompatibility between polyelectrolytes triggers the usual cascade of first-order phase transitions, dis -> bcc -> hex -> lam. Fluctuations alter the phase diagram topology and allow the direct transitions from the disordered state (dis) to hex and lam microphases; for the symmetric blend, ODT becomes weakly first order. We also discuss that both microphase separation in polyelectrolyte blends and the formation of nuclear "pasta" phases within neutron stars are governed by similar physical principles, despite the 6 orders of magnitude difference in the periods of these structures.

Rumyantsev, Artem M.↗

DOE OSTI2026

Cost-effective valorization of 2,3-butanediol to high-value chemicals and jet fuel

Here, this work outlines an optimized process for converting 2,3-butanediol (BDO) into sustainable aviation fuel (SAF) and C4 chemicals. BDO is reactively separated from fermentation broth by forming dioxolanes, which are converted to isobutyraldehyde, methyl ethyl ketone (MEK), and 1,3-butadiene. These intermediates are reduced and dehydrated over Cu/ZSM-5 to form alkenes, which can be oligomerized and hydrotreated to jet-range alkanes. Previous BDO-dioxolane-alkene processes are limited by the requirement for a continuous aldehyde source for dioxolane formation. Brønsted acidic zeolites catalyze dioxolane deacetalization to form isobutyraldehyde and MEK in a >2:1 molar ratio, providing an internal, recyclable aldehyde source. Dioxolane formation optimization was performed to achieve >95% dioxolane yields over Amberlyst-15 and minimize isobutyraldehyde recycle. The overall BDO-dioxolane-fuel process yields an alkane mixture that enables at least a 50% v/v blend with Jet-A. Techno-economic analyses and life cycle assessments for this BDO-dioxolane-fuel process yield scenarios with <$2.50 per gallon gas equivalent and >58% reduction in CO2 emissions.

2,3-butanediol↗

DOE OSTI2020

A phenomenological rate of injection model for predicting fuel injection with application to mixture formation in light-duty diesel engines

Fuel injection rate laws are one of the most important pieces of information needed when modeling engine combustion with computational fluid dynamics. In this study, a simple phenomenological model of a common-rail injector was developed and calibrated for the Bosch CRI2.2 platform. The model requires three tunable parameter fits, making it relatively easy to calibrate and suitable for injector modeling when high-fidelity information about the internal injector’s geometry and electrical circuit details are not available. Each injection pulse is modeled as a sequence of up to four stages: an injection needle mechanical opening transient, a full-lift viscous flow inertial transient, a Bernoulli steady-state stage, and a needle descent transient. Parameters for each stage are obtained as polynomial fits from measured injection rate properties. The model enforces total injected mass, and the intermediate stages are only introduced if the injection pulse duration is long enough. Experimental rates of injection from two separate campaigns on the same injector were used to calibrate the model. The model was first validated against measured injection rate laws featuring pilot injections, short partially premixed combustion pulses, and conventional diesel combustion injection strategies. Then, it was employed as an input to engine computational fluid dynamics simulations, which were run to simulate experiments of mixture formation in an optically accessible light-duty diesel engine. It was found that, though simple, this model is capable of predicting both pilot and main injection pulse mass flow rates well: the simulations yielded accurate predictions of in-cylinder equivalence ratio distributions from injection strategies for both partially premixed combustion and pilot injections. Also, once calibrated, the model produced appropriate results for a wide range of injected mass and rail pressure values. Finally, it was observed that usage of such a relatively simple model can be a good choice when high-fidelity injection rate input and highly detailed information of the injector’s geometry and operation are not available, particularly as noticeable discrepancies can be present also among different experimental campaigns on similar hardware.

42 ENGINEERING↗

DOE OSTI2024

Closed‐Loop Recycling of Mixed Plastics of Polyester and CO 2 ‐Based Polycarbonate to a Single Monomer

Abstract Physical blending is an effective strategy for tailoring polymeric materials to specific application requirements. However, physically blended mixed plastics waste adds additional barriers in mechanical or chemical recycling. This difficulty arises from the intricate requirement for meticulous sorting and separation of the various polymers in the inherent incompatibility of mixed polymers during recycling. To overcome this impediment, this work furthers the emerging single‐monomer – multiple‐materials approach through the design of a bifunctional monomer that can not only orthogonally polymerize into two different types of polymers – specifically lactone‐based polyester and CO 2 ‐based polycarbonate – but the resultant polymers and their mixture can also be depolymerized back to the single, original monomer when facilitated by catalysis. Specifically, the lactone/epoxide hybrid bifunctional monomer (BiL O ) undergoes ring‐opening polymerization through the lactone manifold to produce polyester, PE(BiL O ), and is also applied to ring‐opening copolymerization with CO 2 , via the epoxide manifold, to yield polycarbonate, PC(BiL O ). Remarkably, a one‐pot recycling process of a BiL O ‐derived PE/PC blend back to the constituent monomer BiL O in >99 % selectivity was achieved with a superbase catalyst at 150 °C, thereby effectively obviating the requirement for sorting and separation typically required for recycling of mixed polymers.

Shi, Changxia↗

DOE OSTI2024

Closed‐Loop Recycling of Mixed Plastics of Polyester and CO 2 ‐Based Polycarbonate to a Single Monomer

Chemistry↗

DOE OSTI2020

Role of the Solvent–Surfactant Duality of Ionic Liquids in Directing Two-Dimensional Particle Assembly

Nanoparticle self-assembly plays a key role in formation of superlattices, which exhibit remarkable physical and chemical properties. However, controlling assembly remains a challenge partly due to a lack of understanding of the assembly dynamics and the difficulty in linking interfacial solution properties to interparticle forces. In this study, using liquid-cell transmission electron microscopy, self-assembly of gold nanoparticles (NPs) into superlattices in mixtures of water and ionic liquid (IL) was visualized, revealing a dual role of the IL in the assembly process. At intermediate concentrations, the IL acts as a surfactant stabilizing the particles at a well-defined equilibrium separation corresponding to the length of hydrogen bonded IL cations adsorbed onto neighboring NPs. Analysis of the interparticle forces reveals attractive long-range interactions of a van der Waals nature. At separations of 1-3 nm, interactions are dominated by attractive ion correlation and repulsive hydration forces giving rise to an energy minimum at 1.5 nm separation. The superlattice is further stabilized by hydrogen bonding, which shifts the equilibrium interparticle distance to 1.1 nm. In contrast, at higher concentrations, IL accumulates and forms a structured network in the gap between nanoparticles, where it acts as a solvent that eliminates the repulsive barrier and thus promotes particle coalescence. This solvent-surfactant duality of IL opens new opportunities for their use in directing particle assembly.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS1999

Unsteady Diffusion Flames: Ignition, Travel, and Burnout (SUBCORE Project: Simplified Unsteady Burning of Contained Reactants)

An experimental apparatus for the examination of a planar, virtually strain-rate-free diffusion flame in microgravity has been designed and fabricated. Such a diffusion flame is characterized by relatively large spatial scale and high symmetry (to facilitate probing), and by relatively long fluid-residence time (to facilitate investigation of rates associated with sooting phenomena). Within the squat rectangular apparatus, with impervious, noncatalytic isothermal walls of stainless steel, a thin metallic splitter plate subdivides the contents into half-volumes. One half-volume initially contains fuel vapor diluted with an inert gas, and the other, oxidizer diluted with another inert gas-so that the two domains have equal pressure, density, and temperature. As the separator is removed, by translation in its own plane, through a tightly fitting slit in one side wall, a line ignitor in the opposite side wall initiates a triple-flame propagation across the narrow layer of combustible mixture formed near midheight in the chamber. The planar diffusion flame so emplaced is quickly disrupted in earth gravity. In microgravity, the planar flame persists, and travels ultimately into the half-volume containing the stoichiometrically deficient reactant; the flame eventually becomes extinguished owing to reactant depletion and heat loss to the walls.

Fendell, Francis↗

NASA NTRS2015

Development of a Premixed Combustion Capability for Scramjet Combustion Experiments

Hypersonic air-breathing engines rely on scramjet combustion processes, which involve high speed, compressible, and highly turbulent flows. The combustion environment and the turbulent flames at the heart of these engines are difficult to simulate and study in the laboratory under well controlled conditions. Typically, wind-tunnel testing is performed that more closely approximates engine testing rather than a careful investigation of the underlying physics that drives the combustion process. The experiments described in this paper, along with companion data sets being developed separately, aim to isolate the chemical kinetic effects from the fuel-air mixing process in a dual-mode scramjet combustion environment. A unique fuel injection approach is taken that produces a nearly uniform fuel-air mixture at the entrance to the combustor. This approach relies on the precombustion shock train upstream of the dual-mode scramjet combustor. A stable ethylene flame anchored on a cavity flameholder with a uniformly mixed combustor inflow has been achieved in these experiments allowing numerous companion studies involving coherent anti-Stokes Raman scattering (CARS), particle image velocimetry (PIV), and planar laser induced fluorescence (PLIF) to be performed.

Rockwell, Robert D.↗

NASA NTRS1993

From minerals to rocks: Toward modeling lithologies with remote sensing

High spectral resolution imaging spectroscopy will play an important role in future planetary missions. Sophisticated approaches will be needed to unravel subtle, super-imposed spectral features typically of natural systems, and to maximize the science return of these instruments. Carefully controlled laboratory investigations using homogeneous mineral separates have demonstrated that variations due to solid solution, changes in modal abundances, and the effects of particle size are well understood from a physical basis. In many cases, these variations can be modeled quantitatively using photometric models, mixing approaches, and deconvolution procedures. However, relative to the spectra of individual mineral components, reflectance spectra of rocks and natural surfaces exhibit a reduced spectral contrast. In addition, soils or regolith, which are likely to dominate any natural planetary surface, exhibit spectral properties that have some similarities to the parent materials, but due to weathering and alteration, differences remain that cannot yet be fully recreated in the laboratory or through mixture modeling. A significant challenge is therefore to integrate modeling approaches to derive both lithologic determinations and include the effects of alteration. We are currently conducting laboratory investigations in lithologic modeling to expand upon the basic results of previous analyses with our initial goal to more closely match physical state of natural systems. The effects of alteration are to be considered separately.

Mustard, John F.↗

DOE OSTI2021

Influence of Ions on the Size Dependent Morphology of Aerosol Particles

The study of aerosol particles composed of mixtures of organic and inorganic compounds provides insights for understanding chemistry in the atmosphere as well as information about phase transitions of systems under confinement. In the submicron size regime, we have previously found that liquid-liquid phase separation can be inhibited at sufficiently small particle diameters leading to phase separated particles at larger sizes and homogeneous particles below a threshold diameter. In this paper, we have investigated the influence of cations and anions in the inorganic compound (NH 4 + , Na + , SO 4 2- , HSO 4 - , and Cl-) on the phase separation of submicron aerosol particles. Each of five salts were studied with two different organic compounds. Surprisingly, a strong dependence on the identity of the cation is evident in the size dependence of the particle morphology and no dependence on the anion was found. Sodium containing samples exhibit phase separation in particles below 20 nm in diameter whereas ammonium containing samples cease to undergo phase separation in particles between 45 and 65 nm in diameter. The separation relative humidity for supermicron droplets also depends on the identity of the cation in the inorganic component if the anion is the same across the salts compared. In addition, the correlation between the separation relative humidity and size dependence was investigated and displays a trend, but is not a dominant feature of the data. We explain the results in terms of hard and soft ions, where the harder cation (Na + ) leads to phase separation down to smaller sizes while the softer cation (NH 4 + ) prevents phase separation and causes particles up to a larger diameter to remain homogenous. This study has implications for atmospheric chemistry in regions dominated by sea spray aerosol, which contains sodium as the primary cation, when compared to continental aerosol, where ammonium is an abundant cation. Additionally, these findings can be used to understand the influence of cations on the phase transitions of confined materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Pulsed power to control growth of silicon nanoparticles in low temperature flowing plasmas

Low-temperature plasmas have seen increasing use for synthesizing high-quality, mono-disperse nanoparticles (NPs). Recent work has highlighted that an important process in NP growth in plasmas is particle trapping—small, negatively charged nanoparticles become trapped by the positive electrostatic potential in the plasma, even if only momentarily charged. In this article, results are discussed from a computational investigation into how pulsing the power applied to an inductively coupled plasma (ICP) reactor may be used for controlling the size of NPs synthesized in the plasma. The model system is an ICP at 1 Torr to grow silicon NPs from an Ar/SiH 4 gas mixture. This system was simulated using a two-dimensional plasma hydrodynamics model coupled to a three-dimensional kinetic NP growth and trajectory tracking model. The effects of pulse frequency and pulse duty cycle are discussed. We identified separate regimes of pulsing where particles become trapped for one pulsed cycle, a few cycles, and many cycles—each having noticeable effects on particle size distributions. For the same average power, pulsing can produce a stronger trapping potential for particles when compared to continuous wave power, potentially increasing particle mono-dispersity. Pulsing may also offer a larger degree of control over particle size for the same average power. Experimental confirmation of predicted trends is discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2024

Uncertainty quantification of mass models using ensemble Bayesian model averaging

Developments in the description of the masses of atomic nuclei have led to various nuclear mass models that provide predictions for masses across the whole chart of nuclides. These mass models play an important role in understanding the synthesis of heavy elements in the rapid neutron capture ( r ) process. However, it is still a challenging task to estimate the size of uncertainty associated with the predictions of each mass model. In this work, a method called ensemble Bayesian model averaging (EBMA) is introduced to quantify the uncertainty of one-neutron separation energies (S 1 n ) which are directly relevant in the calculations of r -process observables. Here, this Bayesian method provides a natural way to perform model averaging, selection, and uncertainty quantification, by combining the mass models as a mixture of normal distributions whose parameters are optimized against the experimental data, employing the Markov chain Monte Carlo method using the no-u-turn sampler. The EBMA model optimized with all the experimental S 1 n from the AME2003 nuclides are shown to provide reliable uncertainty estimates when tested with the new data in the AME2020.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

NASA NTRS1987

Rare gas analysis of size fractions from the Fayetteville meteorite

Eight size separates of grains from the Fayetteville meteorite ranging from less than 20 microns to greater than 1 millimeter are being analyzed for their rare gas elemental and isotopic composition. Measurements on five samples were performed. All five reveal a mixture of solar, planetary, cosmic ray produced and radiogenic gases. The solar component is of particular interest since it suggest that the meteorite may represent a fragment of an ancient protoplanetary regolith which was exposed to the solar wind. Solar wind elements are implanted in the outer few hundred Angstroms of exposed grains and are therefore expected to be surface correlated. At present the data do not suggest that such a correlation exists, but the final conclusion must await further analyses and data reduction.

Jordan, Jim L.↗

NASA NTRS2012

Simulation of Complex Cracking in Plain Weave C/SiC Composite under Biaxial Loading

Finite element analysis is performed on a mesh, based on computed geometry of a plain weave C/SiC composite with assumed internal stacking, to reveal the pattern of internal damage due to biaxial normal cyclic loading. The simulation encompasses intertow matrix cracking, matrix cracking inside the tows, and separation at the tow-intertow matrix and tow-tow interfaces. All these dissipative behaviors are represented by traction-separation cohesive laws. Not aimed at quantitatively predicting the overall stress-strain relation, the simulation, however, does not take the actual process of fiber debonding into account. The fiber tows are represented by a simple rule-of-mixture model where the reinforcing phase is a hypothetical one-dimensional material. Numerical results indicate that for the plain weave C/SiC composite, 1) matrix-crack initiation sites are primarily determined by large intertow matrix voids and interlayer tow-tow contacts, 2) the pattern of internal damage strongly depends on the loading path and initial stress, 3) compressive loading inflicts virtually no damage evolution. KEY WORDS: ceramic matrix composite, plain weave, cohesive model, brittle failure, smeared crack model, progressive damage, meso-mechanical analysis, finite element.

Cheng, Ron-Bin↗

NASA NTRS2013

Vapor Compression and Thermoelectric Heat Pump Heat Exchangers for a Condensate Distillation System: Design and Experiment

Maximizing the reuse of wastewater while minimizing the use of consumables is critical in long duration space exploration. One of the more promising methods of reclaiming urine is the distillation/condensation process used in the cascade distillation system (CDS). This system accepts a mixture of urine and toxic stabilizing agents, heats it to vaporize the water and condenses and cools the resulting water vapor. The CDS wastewater flow requires heating and its condensate flow requires cooling. Performing the heating and cooling processes separately requires two separate units, each of which would require large amounts of electrical power. By heating the wastewater and cooling the condensate in a single heat pump unit, mass, volume, and power efficiencies can be obtained. The present work describes and compares two competing heat pump methodologies that meet the needs of the CDS: 1) a series of mini compressor vapor compression cycles and 2) a thermoelectric heat exchanger. In the paper, the system level requirements are outlined, the designs of the two heat pumps are described in detail, and the results of heat pump performance tests are provided. A summary is provided of the heat pump mass, volume and power trades and a selection recommendation is made.

Erickson, Lisa R.↗

NASA NTRSDate not supplied

Less-Altered CI Lithology in the Kaidun Meteorite Breccia

One of the most interesting initial results of the characterization of the asteroid Ryugu regolith material returned by the Hayabusa2 spacecraft is the presence of a significant quantity of less-aqueously altered CI material, tentatively called “CI2”. This lithology is characterized by an approximately ten-fold increase in the amount of an hydrous ferromagnesian silicates over what is found n CI1 chondrites, with these being principally olivine, low- and high-calcium pyroxene. Remnant CAI phases are found as well as probable chondrule fragments. Magnetite, pyrrhotite and hydroxyapatite are abundant. The main carbonate is calcite. Matrix is mainly a mixture of saponite and serpentine phases. Assuming that this lithology should be a better representative of the more “primordial” mineralogy of early nebular solids than more processed CI1 material, we have been re-examining CI lithologies found as separate meteorites as well as clasts in other meteorites, seeking similar CI2 material. The Kaidun breccia is notorious for including almost every type of meteorite class except CR2 (which is ironic considering that Kaidun is still officially classified as CR2). We report here the discovery of a probable CI2 lithology in one carbonaceous chondrite-rich Kaidun sample.

Michael Zolensky↗

DOE OSTI2026

Influence of Nd(II) and Nd(III) Ions on the Speciation and Kinetic Dynamics of Radiolytic Transients in Molten LiCl-KCl Eutectic Salt Mixtures

In the pyrochemical reprocessing of used nuclear fuel, understanding the effects of ionizing radiation on the chemical behavior of fission products in molten chloride eutectic salt is crucial. Here, this study investigates the impact of radiation on the chemical and kinetic speciation of Nd ions in molten LiCl-KCl eutectic, which are challenging to separate due to their multivalent oxidation states and comproportionation reactions. Electron pulse radiolysis techniques were used to determine transient absorption spectra, chemical kinetics, and activation parameters for the reaction of Nd ions with the primary products of molten LiCl-KCl eutectic radiolysis: the solvated electron (e S - ) and dichlorine radical anion (Cl 2 •- ). Initially, Nd(III) reacted rapidly with e S - , forming Nd(II) with a second-order rate coefficient of k = (4.54 ± 0.07) × 10 10 M -1 s -1 at 673 K. The resulting Nd(II) ions then reacted slowly with Cl 2 •- , regenerating Nd(III) with an estimated rate of k = (1.72 ± 0.04) × 10 10 M -1 s -1 at 673 K. Additionally, the comproportionation reaction of Nd(III) and Nd(s) to form Nd(II) was monitored chemically and electrochemically. This work suggests that the comproportionation reaction of Nd(III) with Nd(s) to form Nd(II) is unstable in molten LiCl-KCl eutectic.

36 - MATERIALS SCIENCE↗