Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Mixing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Low-g fluid mixing - Further results from the Tank Pressure Control Experiment

The Tank Pressure Control Experiment (TPCE) made its first space flight on STS-43 in 1991. Its objective was to test the effectiveness of low-energy axial jet mixing at controlling pressures in low gravity. The experiment used refrigerant 113 at near-saturation conditions, at an 83 percent fill level, to simulate the fluid dynamics and thermodynamics of cryogenic fluids in future space applications. Results from this flight were reported previously. TPCE was again flown in space on STS-52 in 1992, this time primarily to study boiling and related thermal phenomena which will be reported elsewhere. However additional mixing and pressure control data were obtained from the reflight that supplement the data from the first flight.

Bentz, M. D.↗
NASA NTRS1993

Streamwise vortex meander in a plane mixing layer

The present experimental study was conducted in order to determine the existence of streamwise vortex meander in a mixing layer, and if present, its significance on the measured properties. The dependence of the velocity cross-correlation on the fixed probe location was shown to be a good indicator of the stationarity of the streamwise vortex location. The cross-correlation measurements obtained here indicate that spanwise meander is negligible, although transverse apparent meander (normal to the plane of the mixing layer) was indicated. The transverse meander, exemplified by the elliptical shape of the mean streamwise vorticity contours, was expected, since the streamwise vorticity in the braid region is essentially inclined, with respect to the streamwise direction. These conclusions were supported by results of estimated spanwise profiles of the transverse velocity component. The balance of evidence suggests that the measured mean streamwise vorticity decay is representative of the decay of the vorticity rather than an artifact of meander.

Leboeuf, Richard L.↗
NASA NTRS1993

Self-, N2- and Ar-broadening and line mixing in HCN and C2H2

Self-, N2- and Ar-broadening coefficients were measured for the stretch-bend infrared combination bands nu-1 + nu-1/2 (4004/cm) of HCN and nu-1 + nu-1/5 (4091/cm) of C2H2, using a tunable difference-frequency laser. At atmospheric pressures, the Q branches of these bands exhibit significant rotational narrowing or line mixing. The broadening coefficients are fit with empirical rotationally inelastic collision rate laws, which are then used to model the line mixing in the overlapped Q-branch profiles. Simple energy gap fitting laws appear to be suitable for the shorter-range intermolecular quadrupole-quadrupole and induction forces, whereas an energy-corrected-sudden scaling law works better for the longer-range dipole-dipole and dipole-quadrupole collision partners. In all cases, the line-coupling coefficients are substantially reduced from the rotationally inelastic rates fit to the broadening coefficients, indicating that 35-70 percent of the broadening may be due to other collisional mechanisms such as cross-relaxation to the degenerate H state vibrational level.

Pine, A. S.↗
NASA NTRS1993

Mixing of multiple jets with a confined subsonic crossflow

An account is given of experimental and computational results on the mixing of single, double, and opposed rows of jets characterized by an either isothermal or variable temperature mainstream in a confined subsonic crossflow; these flow configurations are typical of gas turbine combustor dilution chambers. It is established that the momentum-flux ratio is the most significant flow variable. Combinations of flow and geometry yielding optimum mixing were identified from experimental and computational results. The orifice spacing and momentum-flux relationships affected jet structure, which was significantly different between jets injected from the inner wall of a turn and those injected from the outer wall.

Holdeman, James D.↗
NASA NTRS1993

Ion mixing in the plasma sheet boundary layer by drift instabilities

The linear stability properties of collisionless drift instabilities are analyzed in a Harris equilibrium model of the plasma sheet boundary layer (PSBL). The strearmng ions with drift-type instabilities driven in the PSBL are considered. The fluid approximation leads to growth but predicts that the mode width approaches the gyroradius of the energetic ions. Thus an integral equation theory for the modes is developed taking into account that in the PSBL the curvature drift is weak compared with the grad-B drift. The exact wave particle resonance is kept in the nonlocal response functions. Plasma density, temperature, and magnetic gradient drift motions are taken into account. The drift modes produce an anomalous cross-field momentum transport mixing the PSBL ions on the time scale of tens of seconds. A nonlinear simulation is performed which shows the coalescence of the small scale, fast growing modes into large-scale vortices. The relation between these collective modes and plasma sheet transport phenomena is discussed including the comparison with the competing plasma mixing from single-particle stochasticity.

Horton, W.↗
NASA NTRS1993

Elastic interactions of a fatigue crack with a micro-defect by the mixed boundary integral equation method

In this paper, the mixed boundary integral equation method is developed to study the elastic interactions of a fatigue crack and a micro-defect such as a void, a rigid inclusion or a transformation inclusion. The method of pseudo-tractions is employed to study the effect of a transformation inclusion. An enriched element which incorporates the mixed-mode stress intensity factors is applied to characterize the singularity at a moving crack tip. In order to evaluate the accuracy of the numerical procedure, the analysis of a crack emanating from a circular hole in a finite plate is performed and the results are compared with the available numerical solution. The effects of various micro-defects on the crack path and fatigue life are investigated. The results agree with the experimental observations.

Lua, Yuan J.↗
NASA NTRS1991

Fractal interfaces and product generation in the two dimensional mixing layer

The dependence of product generation on Peclet and Reynolds numbers in a numerically simulated, reacting, two dimensional, temporally growing mixing layer is related theoretically to the fractal dimension of the passive scalar interfaces. This relation is verified using product generation measurements and dimensions derived from a standard box counting technique. A transition from a low initial dimension to a higher one of approximately 5/3 is identified and shown to be associated to the kinematic distortion on the flow field during the first pairing interaction. It is suggested that the structures responsible for this transition are non-deterministic, non-random, inhomogeneous fractals. Only the large scales are involved. No further transitions, either in the spectra of the vorticity field or in the mixing behavior, are found for Reynolds numbers up to 90,000.

Jimenez, Javier↗
NASA NTRS1991

Studies of supersonic mixing

Studies of supersonic mixing which were accomplished over the last year with Center for Turbulence Research (CTR) support are described. During this period, a Nd:YAG laser, optical components, and data acquisition computer were obtained. This allowed detailed visualizations of the flow structure to be performed at a rapid rate, representing a significant improvement over our previous attempts. Aspects of the flow structure are described below. In addition, preliminary findings on a possible mixing enhancement strategy are also shown using the flow visualization technique.

Clemens, N. T.↗
NASA NTRS1991

Effect of initial conditions on secondary vortex structure in mixing layers

An experimental research project aimed at obtaining quantitative data on the behavior of the secondary vortex structure in a turbulent mixing layer at moderate Reynolds numbers (Re(sub delta) = 2.9 x 10(exp 4)) is discussed. This project was terminated before all the contemplated measurements could be made, and data were obtained only on the spatially stationary part of the secondary structure. Nonetheless, these data reveal some interesting facets of mixing layer behavior which are discussed.

Bell, J. H.↗
NASA NTRS1957

Effect of standing transverse acoustic oscillations on fuel-oxidant mixing in cylindrical combustion chambers

Vapor fuel-oxidant mixing is analyzed for standing transverse acoustic fields simulating those existing in screeching or screaming combustors. The additional mixing due to the acoustic field is shown to be a function of sound pressure and frequency, stream velocity, and turbulence. The effects of these parameters are shown graphically for a realistic range of combustor conditions. The fuel-oxidant ratio at various combustor stations is shown to have a cyclic fluctuation which is in phase with the pressure fluctuations. Possible mechanisms contributing to screech and scream are discussed.

TURBINES, GAS - AFTER-BURNING↗
NASA NTRS1950

Starting of rocket engine at conditions of simulated altitude using crude monoethylaniline and other fuels with mixed acid

Experiments were conducted at sea level and pressure altitude of about 55,000 feet at various temperatures to determine starting characteristics of a commercial rocket engine using crude monoethylaniline and other fuels with mixed acid. With crude monoethylaniline, ignition difficulties were encountered at temperatures below about 20 degrees F. With mixed butyl mercaptans, water-white turpentine, and x-pinene, no starting difficulties were experienced at temperatures as low as minus 74 degrees F. Turpentine and x-pinene, however, sometimes left deposits on the injector face. With blends containing furfuryl alcohol and with other blends, difficulties were experienced either from appreciable deposits or from starting.

COMBUSTION - ROCKET ENGINES↗
NASA NTRS1952

Method of analysis for compressible flow through mixed-flow centrifugal impellers of arbitrary design

A method is presented for analysis of the compressible flow between the hub and the shroud of mixed-flow impellers of arbitrary design. Axial symmetry was assumed, but the forces in the meridional (hub to shroud) plane, which are derived from tangential pressure gradients, were taken into account. The method was applied to an experimental mixed-flow impeller. The analysis of the flow in the meridional plane of the impeller showed that the rotational forces, the blade curvature, and the hub-shroud profile can introduce severe velocity gradients along the hub and the shroud surfaces. Choked flow at the impeller inlet as determined by the analysis was verified by experimental results.

Hamrick, Joseph T↗
NASA NTRS1993

Application of jet-shear-layer mixing and effervescent atomization to the development of a low-NO(x) combustor

An investigation was conducted to develop appropriate technologies for a low-NO(x), liquid-fueled combustor. The combustor incorporates an effervescent atomizer used to inject fuel into a premixing duct. Only a fraction of the combustion air is used in the premixing process to avoid autoignition and flashback problems. This fuel-rich mixture is introduced into the remaining combustion air by a rapid jet-shear-layer-mixing process involving radial fuel-air jets impinging on axial air jets in the primary combustion zone. Computational analysis was used to provide a better understanding of the fluid dynamics that occur in jet-shear-layer mixing and to facilitate a parametric analysis appropriate to the design of an optimum low-NO(x) combustor. A number of combustor configurations were studied to assess the key combustor technologies and to validate the modeling code. The results from the experimental testing and computational analysis indicate a low-NO(x) potential for the jet-shear-layer combustor. Key parameters found to affect NO(x) emissions are the primary combustion zone fuel-air ratio, the number of axial and radial jets, the aspect ratio and radial location of the axial air jets, and the radial jet inlet hole diameter. Each of these key parameters exhibits a low-NO(x) point from which an optimized combustor was developed. Using the parametric analysis, NO(x) emissions were reduced by a factor of 3 as compared with the emissions from conventional, liquid-fueled combustors operating at cruise conditions. Further development promises even lower NO(x) with high combustion efficiency.

Colantonio, Renato Olaf↗
NASA NTRS1993

Projectile-target mixing in melted ejecta formed during a hypervelocity impact cratering event

Tektites contain little to no projectile contamination while, in contrast, some distal ejecta deposits can be relatively projectile-rich (e.g. the Cretaceous-Tertiary (K-T) boundary clay). This compositional difference motivated an experimental study of hypervelocity target-projectile mixing processes. We hope to scale up the results from these experiments and apply them to terrestrial impact structures like the Chicxulub Crater, Yucutan, Mexico, the leading contender as the site for the impact that caused the mass extinction that marks the K-T boundary. Shock decomposition of the approximately 500m thickness of anhydrite, or greater thickness of limestone, in the target rocks at Chicxulub may have been a critical mechanism for either global cooling via SO3, and subsequently H2SO4, formation, or possibly, global warming via increased CO2 formation. Understanding target-projectile mixing processes during hypervelocity impact may permit more accurate estimates of the amount of potentially toxic, target-derived material reaching stratospheric heights.

Evans, Noreen Joyce↗
NASA NTRS1993

Plane mixing layer vortical structure kinematics

The objective of the current project was to experimentally investigate the structure and dynamics of the streamwise vorticity in a plane mixing layer. The first part of this research program was intended to clarify whether the observed decrease in mean streamwise vorticity in the far-field of mixing layers is due primarily to the 'smearing' caused by vortex meander or to diffusion. Two-point velocity correlation measurements have been used to show that there is little spanwise meander of the large-scale streamwise vortical structure. The correlation measurements also indicate a large degree of transverse meander of the streamwise vorticity which is not surprising since the streamwise vorticity exists in the inclined braid region between the spanwise vortex core regions. The streamwise convection of the braid region thereby introduces an apparent transverse meander into measurements using stationary probes. These results corroborated with estimated secondary velocity profiles in which the streamwise vorticity produces a signature which was tracked in time.

Leboeuf, Richard L.↗
NASA NTRS1992

A study of the fine scale motions of incompressible time-developing mixing layers

This work is an extension of a project conducted at the previous CTR summer program and was reported by Chen et al. (1990). In that program, the geometry and topology of the dissipating motions in a variety of shear flows was examined. All data was produced by direct numerical simulations (DNS). The partial derivatives of the velocity field were determined at every grid point in the flow and various invariants and related quantities were computed from the velocity gradient tensor. Motions characterized by high rates of kinetic energy dissipation and high enstrophy were of particular interest. Scatter diagrams of the invariants were mapped out and interesting and unexpected patterns were seen. Each type of shear layer produced its own characteristic scatter plot. In the present project, attention is focused on the incompressible plane mixing layer, and the scatter diagrams are replaced with more useful joint probability density contours. Comparison of the topology of the dissipating motions of flows at different Reynolds numbers are made. Also, plane mixing layers at the same Reynolds number but with different initial conditions are compared.

Soria, J.↗
NASA NTRS1993

Clouding tracing: Visualization of the mixing of fluid elements in convection-diffusion systems

This paper describes a highly interactive method for computer visualization of the basic physical process of dispersion and mixing of fluid elements in convection-diffusion systems. It is based on transforming the vector field from a traditionally Eulerian reference frame into a Lagrangian reference frame. Fluid elements are traced through the vector field for the mean path as well as the statistical dispersion of the fluid elements about the mean position by using added scalar information about the root mean square value of the vector field and its Lagrangian time scale. In this way, clouds of fluid elements are traced and are not just mean paths. We have used this method to visualize the simulation of an industrial incinerator to help identify mechanisms for poor mixing.

Ma, Kwan-Liu↗
NASA NTRS1993

Linear mixing model applied to AVHRR LAC data

A linear mixing model was applied to coarse spatial resolution data from the NOAA Advanced Very High Resolution Radiometer. The reflective component of the 3.55 - 3.93 microns channel was extracted and used with the two reflective channels 0.58 - 0.68 microns and 0.725 - 1.1 microns to run a Constraine Least Squares model to generate vegetation, soil, and shade fraction images for an area in the Western region of Brazil. The Landsat Thematic Mapper data covering the Emas National park region was used for estimating the spectral response of the mixture components and for evaluating the mixing model results. The fraction images were compared with an unsupervised classification derived from Landsat TM data acquired on the same day. The relationship between the fraction images and normalized difference vegetation index images show the potential of the unmixing techniques when using coarse resolution data for global studies.

Holben, Brent N.↗