Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MINORITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44
All sourcesNASA NTRSDOE OSTI
DOE OSTI2015

FCRD Transmutation Fuels Handbook 2015

Transmutation of minor actinides such as Np, Am, and Cm in spent nuclear fuel is of international interest because of its potential for reducing the long-term health and safety hazards caused by the radioactivity of the spent fuel. One important approach to transmutation (currently being pursued by the DOE Fuel Cycle Research & Development Advanced Fuels Campaign) involves incorporating the minor actinides into U-Pu-Zr alloys, which can be used as fuel in fast reactors. It is, therefore, important to understand the properties of U-Pu-Zr alloys, both with and without minor actinide additions. In addition to requiring extensive safety precautions, alloys containing U and Pu are difficult to study for numerous reasons, including their complex phase transformations, characteristically sluggish phase-transformation kinetics, tendency to produce experimental results that vary depending on the histories of individual samples, and sensitivity to contaminants such as oxygen in concentrations below a hundred parts per million. Many of the experimental measurements were made before 1980, and the level of documentation for experimental methods and results varies widely. It is, therefore, not surprising that little is known with certainty about U-Pu-Zr alloys, and that general acceptance of results sometimes indicates that there is only a single measurement for a particular property. This handbook summarizes currently available information about U, Pu, Zr, and alloys of two or three of these elements. It contains information about phase diagrams and related information (including phases and phase transformations); heat capacity, entropy, and enthalpy; thermal expansion; and thermal conductivity and diffusivity. In addition to presenting information about materials properties, it attempts to provide information about how well the property is known and how much variation exists between measurements. Although the handbook includes some references to publications about modeling, its primary focus is experimental data. Most of the data has been published elsewhere (although scattered throughout numerous references, some quite obscure); however, some data is presented here for the first time.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2016

Performance evaluation of the ORNL multi-elemental XRF analysis algorithms

Hybrid K-Edge Densitometer (HKED) systems integrate both K-Edge Densitometry (KED) and X-Ray Fluorescence (XRF) analyses to provide accurate rapid, assay results of the uranium and plutonium content of dissolver solution samples from nuclear fuel reprocessing facilities. Introduced for international safeguards applications in the late 1980s, the XRF component of the hybrid analyses is limited to quantification of U and Pu over a narrow range of U:Pu concentration ratios in the vicinity of ≈100. The analysis was further limited regarding the presence of minor actinide components where only a single minor actinide (typically Am) is included in the analysis and then only treated as an interference. The evolving nuclear fuel cycle has created the need to assay more complex dissolver solutions where uranium may no longer be the dominant actinide in the solution and the concentrations of the so called minor actinides (e.g., Th, Np, Am, and Cm) are sufficiently high that they can no longer be treated as impurities and ignored. Extension of the traditional HKED Region of Interest (ROI) based analysis to include these additional actinides is not possible due to the increased complexity of the XRF spectra. Oak Ridge National Laboratory (ORNL) has developed a spectral fitting approach to the HKED XRF measurement with an enhanced algorithm set to accommodate these complex XRF spectra. This report provides a summary of the spectral fitting methodology and examines the performance of these algorithms using data obtained from the ORNL HKED system, as well as data provided by the International Atomic Energy Agency (IAEA) on actual dissolver solutions.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2017

Final Scientific/Technical Report

A variety of calcifying organisms produce a transient or metastable amorphous calcium carbonate (ACC) precursor phase that is assembled and subsequently transformed into a crystalline biomineral, typically calcite or aragonite. The complex shapes, hierarchical structures, and unique physical properties of the biominerals that result from this calcification pathway have stimulated interest in adapting these concepts for the design and creation of bio-inspired functional materials in the laboratory. ACC also forms as a reactive precursor in diverse inorganic systems and is likely to play a much broader role in calcium carbonate formation. Knowledge of the structure, composition, and behavior of this metastable phase is critical for establishing a structural and mechanistic framework for calcium carbonate formation and its role in biogeochemical processes, including carbon cycling. Minor additives, such as magnesium, phosphorus, and organic macromolecules, are known to play important roles in controlling ACC stability, transformation kinetics, and selection of final crystalline polymorph. Molecular water also occurs in many types of ACC and is thought to play a structural role in its stability and transformation behavior. One of the major challenges that remain unresolved is identification of the structural basis for the role of these minor additives and molecular water. The absence of long-range order in ACC, and other amorphous phases, has posed a challenge for study by techniques commonly used for crystalline solids. Preliminary studies in our group show that the combination of two techniques, synchrotron X-ray-based pair distribution function (PDF) analysis and nuclear magnetic resonance (NMR) spectroscopy can provide entirely new insight to structural properties of synthetic ACC over length scales that are most relevant for understanding its transformation properties. Building on preliminary experiments, we propose a systematic study of synthesis, structure, and transformation behavior in abiotic systems. The work will specifically address the influence of phosphate as a minor additive. PDF analysis will utilize total X-ray scattering data collected at synchrotron facilities optimized for this method and will provide direct characterization of the short- and intermediate-range structure of ACC synthesized under controlled conditions. Parallel computational work using reverse Monte Carlo methods will allow structural models to be constructed for a more complete analysis of PDF results. NMR spectroscopy, using a variety of single- and double-resonance techniques, will provide information on H and CO3 components, including dynamical properties, and their relationship to stabilizing additives. PDF and NMR results will be complemented by parallel studies using X-ray absorption and FT-IR spectroscopy to allow direct comparison to previous studies. These techniques will be used to follow the transformation of different ACC samples, with specific additives, to crystalline phases under controlled condition (e.g., relative humidity). This work will provide the structural and mechanistic basis for understanding ACC stability, its transformation behavior, and the factors that govern polymorph selection. This new insight will directly benefit researchers in diverse fields, as well as adding to the framework of knowledge for understanding and controlling calcium carbonate formation in natural and engineered systems.

58 GEOSCIENCES↗
DOE OSTI2015

Alkali-activated Class F Fly Ash-rich Portland Cement Blends as Alternative Thermal Shock Resistant Cements

This study focused on evaluating the resistance of 300°C-autocalved alkali-activing Class F fly ash (FAF)-rich Type II Ordinary Portland Cement (OPC) blends with 80/20 and 90/10 FAF/OPC ratios to five thermal-shock (TS) fatigue cycles (one cycle, 600°C heat – 25°C water quenching). The factors to be evaluated included the hydration behaviors, crystalline/ amorphous phaseidentifications, -compositions and -transformations, and microstructural-developments andalterations for blended cements assembled by three different alkaline activators, sodium metasilicate (SMS), soda ash (SA), and sodium sulfate (SS). All factors were related directory to the changes in compressive strength after TS testing. The setting time of cement slurries at 25° and 85°C depended on the alkaline activators; SMS and SA contributing to a strong alkalinity hastened setting, while SS with moderate alkalinity extended the setting time. A more prolonged setting time was observed from non-activated cement. In this case, there were two separated hydration reactions: The first reaction was the hydration of OPC; the second one was associated with the dissolution and pozzolanic activity of FAF. In contrast, all alkali- activated cements engendered the concomitant hydration of OPC and FAF, thereby conferring a higher compressive strength on them than that of the non-activator one. The principal contributor to the development of strength of both the non-activated and activated cements at 300°C was the amorphous NaO 2 - or CaO-Al 2 O 3 - SiO 2 -H 2 O (N,C-A-S-H) phase formed by the interactions between alkaline activator, OPC, and FAF. This phase played an important role in minimizing the loss in strength after TS. On the other hand, adding SMS and SA introduced the mixed crystalline FAF-OPC hydrates, such as garranite and wairakite, as the major phases, into the autoclaved cement bodies. Also, these activators induced the formation of two FAF-related crystalline hydrates, analcime as the major phase and riversidelite (0.9 nm tobermorite) as the minor one. However, these identified phases were sensitive to TS, so converting the major phases into minor phases or vanishment. In contrast, three crystalline phases including calcite and anhydrous sodium sulfate as the major ones and 1.1 nm tobermorite as the minor one, that formed in non-activated and activated cements remained unchanged after TS. Additionally, SAactivated cement revealed porous microstructure created by the incorporation of copious amount of carbonate reaction products into the cement, raising concerns that cements might enhance the rate of water transportation and reduce compressive strength. Nevertheless, TS-insensitive amorphous N,C-A-S-H phase as the major cementitions structure coexisting with TS-insensitive crystalline products were responsible for sustaining the integrity of alkali-activated FAF-rich OPC cement systems in such harsh heat-cooling fatigue environments.

15 GEOTHERMAL ENERGY↗
DOE OSTI2018

Organic Speciation and Interactions in ALSEP. One Step Partitioning Process of MinorActinides, Lanthanides, and Fission Products

Research conducted in this project focused on speciation characterization of the ALSEP extraction system (similar to the TALSPEAK-like application) which addresses recovery of minor actinides and lanthanides from PUREX raffinate. The ALSEP (Actinide-Lanthanide Separation) system proposes a trivalent minor actinide/lanthanide group extraction followed by a selective actinide strip to effectively partition minor actinides, lanthanides, and other fission products. The group extraction is achieved by a mixed organic solvent, combining acidic and neutral extracting ligands. The objective of this work is investigation the interactions of the acidic and neutral ligands with each other in the extraction organic solvent and with desired metals. Four combinations of a cation-exchange ligand (either HDEHP or HEH[EHP]) and a neutral solvating ligand (either TODGA or T2EHDGA) in n-dodecane were studied. Interligand dimers in these combinations were investigated with NMR and FTIR, the strongest interaction was observed for HDEHP+TODGA and weakest for T2EHDGA+HEH[EHP]. Complexes of the trivalent Am and lanthanides Nd, Eu, Ho, Pr in these binary ligand mixtures were probed with spectroscopic (UV–vis, time-resolved fluorescence, XAFS and SAXS-spectroscopies) and extraction (Job’s plot, slope analysis) methods; co-extracted water and nitric acid were analyzed by titration methods. Comparison of the collected spectra showed significant shifting for both DGA ligands with HDEHP, while both combinations of HEH[EHP]+DGA displayed much smaller spectral changes. Data were modeled with HypSpec program, and stability constants for extracted complexes were calculated. Aggregation in these systems were studied by SAXS (small-angle X-ray scattering) spectroscopy and interfacial tension, size of aggregates were measured. Two PhD students graduated (2017, 2018) and one student continues her PhD study.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Intrahost SARS-CoV-2 k-mer Identification Method (iSKIM) for Rapid Detection of Mutations of Concern Reveals Emergence of Global Mutation Patterns

Despite unprecedented global sequencing and surveillance of SARS-CoV-2, timely identification of the emergence and spread of novel variants of concern (VoCs) remains a challenge. Several million raw genome sequencing runs are now publicly available. We sought to survey these datasets for intrahost variation to study emerging mutations of concern. We developed iSKIM (“intrahost SARS-CoV-2 k-mer identification method”) to relatively quickly and efficiently screen the many SARS-CoV-2 datasets to identify intrahost mutations belonging to lineages of concern. Certain mutations surged in frequency as intrahost minor variants just prior to, or while lineages of concern arose. The Spike N501Y change common to several VoCs was found as a minor variant in 834 samples as early as October 2020. This coincides with the timing of the first detected samples with this mutation in the Alpha/B.1.1.7 and Beta/B.1.351 lineages. Using iSKIM, we also found that Spike L452R was detected as an intrahost minor variant as early as September 2020, prior to the observed rise of the Epsilon/B.1.429/B.1.427 lineages in late 2020. iSKIM rapidly screens for mutations of interest in raw data, prior to genome assembly, and can be used to detect increases in intrahost variants, potentially providing an early indication of novel variant spread.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2019

The Relation between Galaxy ISM and Circumgalactic O vi Gas Kinematics Derived from Observations and ΛCDM Simulations

We introduce the first galaxy–O vi absorption kinematic study for 20 absorption systems (EW > 0.1 Å) associated with isolated galaxies (0.15 ≤ z ≤ 0.55) that have accurate redshifts and rotation curves obtained using Keck/ESI. Our sample is split into two azimuthal angle bins: major axis (Φ < 25°) and minor axis (Φ > 33°). O vi absorption along the galaxy major axis is not correlated with galaxy rotation kinematics, with only 1/10 of systems that could be explained with rotation/accretion models. This is in contrast to corotation commonly observed for Mg ii absorption. O vi along the minor axis could be modeled by accelerating outflows, but only for small opening angles, while the majority of the O vi is decelerating. Along both axes, stacked O vi profiles reside at the galaxy systemic velocity with the absorption kinematics spanning the entire dynamical range of their galaxies. The O vi found in AMR cosmological simulations exists within filaments and in halos of ~50 kpc surrounding galaxies. Simulations show that major-axis O vi gas inflows along filaments and decelerates as it approaches the galaxy, while increasing in its level of corotation. Minor-axis outflows in the simulations are effective within 50–75 kpc; beyond that they decelerate and fall back onto the galaxy. While the simulations show clear O vi kinematic signatures, they are not directly comparable to observations. When we compare kinematic signatures integrated through the entire simulated galaxy halo, we find that these signatures are washed out owing to full velocity distribution of O vi throughout the halo. We illustrate that O vi alone does not serve as a useful kinematic indicator of gas accretion, outflows, or star formation and likely best probes the halo virial temperature.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1971

Experimental and computer studies of the radiation effects in silicon solar cells

A summary of selected experimental results obtained on lithium-diffused bulk silicon is presented. Particular emphasis is placed on the radiation-induced degradation and thermal annealing of minority carriers in bulk silicon because solar cell output is related to the minority carrier lifetime. The temperature dependence of the minority carrier lifetime indicates the density and energy levels of the recombination centers and provides clues to their identity. Electron spin resonance and infrared absorption techniques are used to investigate the introduction and anneal of three specific radiation induced defects, which are thought to contribute to the recombination process.

Leadon, R. E.↗
NASA NTRS1974

Surface photovoltage method extended to silicon solar cell junction

The conventional surface photovoltage (SPV) method is extended to the measurement of the minority carrier diffusion length in diffused semiconductor junctions of the type used in a silicon solar cell. The minority carrier diffusion values obtained by the SPV method agree well with those obtained by the X-ray method. Agreement within experimental error is also obtained between the minority carrier diffusion lengths in solar cell diffusion junctions and in the same materials with n-regions removed by etching, when the SPV method was used in the measurements.

Wang, E. Y.↗
NASA NTRS1977

Mother, Earth, Father Sky Symposium

A conference was held in which minority aerospace scientists and engineers interacted with the minority community, particularly at the junior high, high school, and college levels. There were two presentations in the biological sciences, two in the physical and environmental sciences, seven in engineering and computer sciences, and nine in aerospace science and engineering. Aerospace technology careers and aerospace activities were discussed as to how they are relevant to minorities and women.

Bowman, B.↗
NASA NTRS1978

Volumetric direct nuclear pumped laser

A volumetric direct nuclear pumped laser was developed in which the gas is a mixture of He-3 and a minority gas from the group of argon, krypton, xenon, chlorine and fluorine. The mixture of He-3 and the minority gas produces lasing with a minority gas concentration of from 0.01 to 10 percent argon, 1 percent krypton, 0.01 to 5 percent xenon and small concentrations of chlorine or fluorine.

Jalufka, N. W.↗
NASA NTRS1979

The discovery and orbit of /2060/ Chiron

'Slow-moving Object Kowal' was discovered as an asteroidal object of photographic magnitude about 18 on photographic plates made on October 18 and 19, 1977 with the 122-cm Schmidt telescope at Palomar Observatory. It was determined that the object was located between 14 and 17 AU from the earth in a low-inclination, near-circular orbit. Examination of subsequent plates and earlier observations of the area allowed a more exact calculation of the orbital elements, which suggest the object to be in 3:5 resonance with Saturn at a perihelion of 8.5 AU. The object's orbital behavior suggests that of an inactive comet perturbed by Saturn from a previous orbit, however its magnitude is uncharacteristically large for a comet. It is proposed that object Kowal was once an ordinary minor planet that was deflected into its present orbit by collisions with other minor planets and a series of encounters with Jupiter and Saturn. The object has received the minor planet number (2060) and the name of Chiron has been proposed.

Kowal, C. T.↗
NASA NTRS1979

Neutral thermospheric composition and thermal structure

A review of the published experimental works of the past four years is presented. Since 1975, satellite and ground based programs produced new data on the composition and structure of the thermosphere, including the first extensive measurements of a number of minor constituents. The new data were incorporated in a number of semiempirical models which provided an increasingly accurate picture of thermospheric variations. Empirical modelling is considered, followed by solar activity variations, daily variations, magnetic storm variations, measurements of molecular oxygen and minor species, and miscellaneous temperature and density determinations. The concepts of global circulation patterns driven by solar radiation, magnetospheric energy, and momentum sources, and wave sources in the lower atmosphere, and the accompanying redistribution of minor species are outlined.

Hedin, A. E.↗
NASA NTRS1980

Preparation of monotectic alloys having a controlled microstructure by directional solidification under dopant-induced interface breakdown

Monotectic alloys having aligned spherical particles of rods of the minor component dispersed in a matrix of the major component are prepared by forming a melt containing predetermined amounts of the major and minor components of a chosen monotectic system, providing in the melt a dopant capable of breaking down the liquid solid interface for the chosen alloy, and directionally solidfying the melt at a selected temperature gradient and a selected rate of movement of the liquid-solid interface (growth rate). Shaping of the minor component into spheres or rods and the spacing between them are controlled by the amount of dopant and the temperature gradient and growth rate values. Specific alloy systems include Al Bi, Al Pb and Zn Bi, using a transition element such as iron.

Parr, R. A.↗
NASA NTRS1982

Flight service evaluation of Kevlar-49 epoxy composite panels in wide-bodied commercial transport aircraft

Kevlar-49 fairing panels, installed as flight service components on three l-1011's, were inspected after 8 years service. The fairings had accumulated a total of 62,000 hours, with one ship set having 20,850 hours service. Kevlar-49 components were found to be performing satisfactorily in service with no major problems. The only defects noted were minor impact damage, a few minor disbonds and a minor degree of fastener hole fraying and elongation. The service history to date indicates that Kevlar-49 epoxy composite materials have satisfactory service characteristics for use in aircraft secondary structures.

Stone, R. H.↗
NASA NTRS1982

The effects of C, P, and S on trace element partitioning during solidification in Fe-Ni alloys

Trace and minor element distributions in the iron meteorites are generally ascribed to partitioning during solidification of the parent body core or to partial melting within the parent body. A model involving fractional crystallization is considered. The model cannot account for differences between the measured values for the slopes on the log Ir-log Ni plots and the slopes predicted using experimentally determined distribution coefficients obtained in an investigation conducted by Goldstein and Friel (1978). The model has also other weaknesses. Part of the answer concerning the existing problems was provided by Narayan and Goldstein (1981, 1982). The present investigation is concerned with a further clarification of the effect of the minor elements P, S, and C on the distribution behavior of trace elements. Attention is given to measurements of the distribution coefficients for various elements (Ir, Ge, Ga, Au, Cu, Cr) in the presence of these minor elements.

Willis, J.↗
NASA NTRS1983

Flight service evaluation of Kevlar-49 epoxy composite panels in wide-bodies commercial transport aircraft

Kevlar-49 fairing panels, installed as flight service components on three L-1011s, were inspected after 9 years of service. There are six Kevlar-49 panels on each aircraft: a left hand and right hand set of a wing body sandwich fairing; a solid laminate under wing fillet panel; and a 422 K (300 F) service aft engine fairing. The fairings have accumulated a total of 70,000 hours, with one ship set having over 24,000 hours service. The Kevlar-49 components were found to be performing satisfactorily in service with no major problems, or any condition requiring corrective action. The only defects noted were minor impact damage, a few minor disbonds and a minor degree of fastener hole fraying and elongation. These are for the most part comparable to damage noted on fiberglass fairings. The service history to date indicates that Kevlar-49 epoxy composite materials have satisfactory service characteristics for use in aircraft secondary structure.

Stone, R. H.↗