Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MELTING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Density of jadeite melts under high pressure and high temperature conditions

The density of the jadeite (NaAlSi2O6) melt has been measured up to 6.5 GPa and 2273 K using the X–ray absorption technique at beamline 13–BM–D of the Advanced Photon Source. A fit of the pressure–density–temperature data to the high temperature Birch–Murnaghan equation of state yielded the following thermoelastic parameters: density, ρ0 = 2.36 g/cm3, isothermal bulk modulus, KT0 = 21.5 ± 0.8 GPa, its pressure derivative, K0' = 8.9 ± 1.2, and the temperature derivative (∂KT/∂T)P = -0.0021 ± 0.0011 GPa/K at a reference temperature T0 = 1473 K. The densification of jadeite melt at low pressures is primarily dominated by topological changes in the structure, including a decrease in T–O–T angle and breaking and reforming of the T–O bond (T = Si4+, Al3+). Compressibilities of jadeite, albite, diopside, phonolite and peridotite melts display a systematic trend: the K0–K0' plot of these silicate melts exhibits an inverse linear relation.

58 GEOSCIENCES↗

The Melting Behavior of Hydrogen Direct Reduced Iron in Molten Steel and Slag: An Integrated Computational and Experimental Study

Direct reduced iron (DRI) and hot briquetted iron (HBI) are essential feedstocks for tramp element control in the electric arc furnace (EAF). Due to greenhouse gas (GHG) concerns related to CO2 emissions, hydrogen as a substitute for natural gas and a reductant in DRI production is being widely explored to reduce GHG emissions in ironmaking. This study examines the melting behavior of hydrogen DRI (H-DRI) pellets in the EAF containing low-carbon (0.1 wt.%) molten steel and molten slag. A computational heat transfer model was developed to predict the melting behavior of H-DRI pellets. To validate the model, a set of experimental laboratory simulations was conducted by immersing H-DRI in a molten steel bath and slag. The temperature history at the center of the pellet during melting and the shell thickness at different melting stages were utilized to validate the model. The simulation results agree with the experimental measurements of steel balls and H-DRI in different metallic molten steel and slag baths.

Materials Science↗

Integral coolant channels supply made by melt-out method

Melt-out method of constructing strong, pressure-tight fluid coolant channels for chambers is accomplished by cementing pins to the surface and by depositing a melt-out material on the surface followed by two layers of epoxy-resin impregnated glass fibers. The structure is heated to melt out the low-melting alloy.

Escher, W. J. D.↗

Melting relations of the Allende meteorite

The proportions of major oxides in the Allende carbonaceous chondrite after partial reduction are remarkably similar to those in possible mantle material of the earth. When heated, the Allende meteorite generates a sulfide melt, a ferrobasaltic melt, and olivine with or without pyroxene, over a wide pressure range (5 to 25 kilobar). The silicate melt contains more sodium and less titanium than lunar ferrobasalts. An aggregate of the Allende chondrite rich in calcium and aluminum produces silica-undersaturated, calcium-rich melt and spinel over a wide pressure and temperature range. It is suggested that the earth's core contains significant amounts of both nickel and sulfur and that a 3:2 mixture of Allende bulk sample and calcium- and aluminum-rich agregates is closer in major element abundances than either of these components to the average composition of the moon.

Seitz, M. G.↗

Reinvestigation of the olivine-spinel transformation in Ni2SiO4 and the incongruent melting of Ni2SiO4 olivine

The olivine-spinel transformation and the melting behavior of Ni2SiO4 were investigated over the PT ranges of 20-40 kbar, 650-1200 C, and 5-13 kbar, 1600-1700 C, respectively. It was confirmed that Ni2SiO4 olivine melts incongruently at high pressures and that it is a stable phase until melting occurs. The PT slope of the incongruent melting curve is approximately 105 bars/deg. The olivine-spinel transformation curve was shown to be a reversible univariant curve, and could be expressed by the linear equation P(bars) equals 23,300 + 11.8 x T(deg C). The transformation curve determined by Akimoto et al. (1965) is nearly parallel to that of the present work, but lies at pressures about 12% lower.

Ma, C.-B.↗

M551 metals melting experiment

The Metals Melting Skylab Experiment consisted of selectively melting, in sequence, three rotating discs made of aluminum alloy, stainless steel, and tantalum alloy. For comparison, three other discs of the same three materials were similarly melted or welded on the ground. The power source of the melting was an electron beam unit. Results are presented which support the concept that the major difference between ground base and Skylab samples (i.e., large elongated grains in ground base samples versus nearly equiaxed and equal sized grains in Skylab samples) can be explained on the basis of constitutional supercooling, and not on the basis of surface phenomena. Microstructural observations on the weld samples and present explanations for some of these observations are examined. In particular, ripples and their implications to weld solidification were studied. Evidence of pronounced copper segregation in the Skylab A1 weld samples, and the tantalum samples studied, indicates a weld microhardness (and hence strength) that is uniformly higher than the ground base results, which is in agreement with previous predictions. Photographs are shown of the microstructure of the various alloys.

Li, C. H.↗

Metal melting, joining, and alloying under weightlessness

During the Skylab mission experiments were conducted concerning the influence of weightlessness on molten metals and the solidification process. It was found that the absence of gravity-induced thermal convection and sedimentation modified the properties of the bulk melt. A metals melting experiment was conducted to study the behavior of metal melted by an electron beam and to evaluate the feasibility of joining metals in space. An exothermic brazing experiment investigated the spreading, mixing, and capillary flow of molten braze material. The containerless melting and solidification of small samples of several metals was studied in another experiment. A description is also given of a study of the directional solidification of solid solution alloys.

Snyder, R. S.↗

The Apollo 17 'melt sheet' - Chemistry, age and Rb/Sr systematics

Major, minor, and trace-element compositions, age data, and Rb/Sr systematics of Apollo 17 boulders have been compiled, and additional analyses performed on a norite breccia clast (77215) included in the Apollo 17, Station 7 boulder. The Apollo 17 boulders are found to be identical or nearly so in major, minor, and trace-element composition, suggesting that they all originated as an impact melt analogous to melt sheets found in larger terrestrial craters. The matrix dates (Ar-40/Ar-39) and Rb/Sr systematics available suggest that this impact melt formed by a single impact about 4 billion years ago. This impact excavated, shocked, brecciated, and melted norites, norite cumulates, and possibly anorthositic gabbros and dunites about 4.4 billion years old. The impact was likely a major one, possibly the Serenitatis basin-forming event.

Winzer, S. R.↗

The thermal history of the Manicouagan impact melt sheet, Quebec

Calculations for the heat transfer between superheated silicate melt and evenly dispersed 1-mm cold clasts indicate that most of the thermal gradients are smoothed out in 100 s and that the rate of equilibrium is sufficiently high so that clasts whose dissolution in the melt is slow may be preserved. The calculations also show the extent to which cold debris and clasts are melted. Calculations for cooling of the 200-m-thick melt sheet at Manicouagan suggest that complete crystallization takes 35 years at 10 m from the edge and 1600 years at the center.

Onorato, P. I. K.↗

Examination of the liquid line of descent of mare basalts in light of data from melt inclusions in olivine

Data on 226 melt inclusions and their host olivines (173 new analyses) are presented and interpreted in terms of general liquid lines of descent and olivine fractionation. The melt inclusions in olivine along with those in ilmenite and late-stage mesostasis in mare basalts define a complex trend. The trend is complicated by the effects of ilmenite, plagioclase, and pyroxene fractionation within the melt inclusions in olivine, the fact that most of the basalts were multiply saturated during olivine fractionation, and the phenomenon of late-stage silicate immiscibility. It is suggested that the first two factors can account for the observed marked divergence of the melt inclusion data from simple early olivine fractionation trends. The elimination of the effects of daughter mineral fractionation by homogenization experiments is considered.

Weiblen, P. W.↗

Compositional variation in late-stage differentiates in mare lavas, as indicated by silicate melt inclusions

Questions regarding an interpretation of data from silicate melt inclusions are considered, taking into account the fragmental nature of the record, the possible effects of cooling rate on late-stage melt composition, and the crystallization of the trapped melt. New data related to 484 new analyses are provided in a separate table. Textural and mineralogical features and bulk chemical composition for an overall characterization of late-stage differentiates are discussed. A description is presented of a grouping and recognition of rock types on the basis of late-stage inclusion analyses. Attention is given to the bimodality of potassium values and the delineation of differentiation trends. It is found that many of the problems in interpretation and much of the scatter found in the composition of silicate melt inclusions in lunar samples can be attributed to the incomplete nature of the record and to crystallization after trapping.

Roedder, E.↗

Experimental melting relations of 63545, 76015, and 76055

The experiments discussed were conducted for the purpose of placing additional constraints on the origin of lunar highlands noritic compositions. The sample 63545 represents a fine-grained, crystalline melt rock consisting of pink spinel, plagioclase, divine, interstitial glass, minor oxides, and metal. According to Chao (1973), 76055 is an olivine-bearing micronorite hornfels with abundant xenocrysts and xenoliths. The sample 76015 is a vesicular, poikilitic impact melt with a homogeneous matrix. The obtained experimental melting relations of 63545, 76055, and 76015, are examined, taking into account experimental petrology and trace element chemistry of mare basalts. It is concluded that the studied compositions do not represent magmas derived by partial melting of either cosmic or differentiated source regions at any pressure in the moon. Presently available information would seem to favor an origin by impact-fusion of several highlands components.

Delano, J. W.↗

Magma genesis by in situ melting within the lunar crust

Blue-gray breccia 73217 represents a brecciated and partially melted assemblage of plutonic rock fragments. The textural and chemical evidence leads to the conclusion that the melt was generated within the lunar crust and that subsequent cooling and crystallization occurred prior to the transportation of this rock to the surface. The melt generated in this fashion, by in situ melting at depth, of moderately Mg-rich rocks, produced a liquid enriched in Fe, Ti, K, and P which could produce sodic ferrogabbro and granitic rocks similar to the light portion of 12013, but not KREEP.

Crawford, M. L.↗

Melt inclusions in Luna 24 soil fragments

Optical examinations of 28 slides of Luna 24 soil fragments revealed melt inclusions in grains of olivine, plagioclase, spinel, and ilmenite as well as interstitial inclusions. In contrast with Apollo samples, the Luna 24 samples contain sulfide melt inclusions, which indicates that saturation with respect to an iron sulfide melt took place throughout much of the crystallization history, even while olivine was crystallizing. The Luna 24 silicate-melt inclusions have recorded a more extensive differentiation toward higher iron magmas than have the Apollo inclusions, but they have also recorded some inexplicably low aluminum values.

Roedder, W.↗

The solubility of carbon monoxide in silicate melts at high pressures and its effect on silicate phase relations

Autoradiographic analysis and gas chromatography were used to measure the solubility in silicate melts of CO-CO2 vapors (30 to 40% CO by thermodynamic calculation) in equilibrium with graphite at temperatures up to 1700 deg C and pressures to 30 kbar. At near-liquidus temperatures CO-CO2 vapors were found to be slightly more soluble than CO2 alone. As a result of the apparently negative temperature dependence of CO solubility, the solubility of CO-CO2 at superliquidus temperatures is less than that of CO2. Melting points of two silicates were depressed more by CO than by CO2. Phase boundary orientations suggest that CO/CO + CO2 is greater in the liquid than in the vapor. The effect of the presence of CO on periodotite phase relations was investigated, and it was found that melts containing both CO and CO2 are nearly as polymerized as those containing only CO2. These results suggest that crystallization processes in planetary interiors can be expected to be about the same, whether the melts contain CO2 alone or CO2 and CO.

Eggler, D. H.↗

Nucleation and growth of plagioclase and the development of textures in a high-alumina basaltic melt

Detailed experiments on the nucleation and growth of plagioclase from an igneous melt are carried out to characterize the magma prior to cooling. It is shown that the nature of the melt directly preceding cooling has a strong effect on texture development, regardless of the origin of the melt. The number, size, and shape of the crystals present in a melt upon extrusion can have a drastic effect on the final textures present in the resulting rocks. Conditions necessary for the formation of poikilitic, intersertal, and porphyritic textures in basaltic rocks are defined.

Nabelek, P. I.↗

Dynamic crystallization and kinetic melting of the lunar soil

Dynamic crystallization and kinetic melting tests have been conducted for a lunar soil that resembles the bulk composition of the matrices of melt-rock breccias. The melting tests indicate that plagioclase and olivine can exist for finite times above their equilibrium liquidus temperatures; within 20-30 C below its liquidus temperature the sample is choked with crystals. A range of textures from radiate to porphyritic pyroxene-plagioclase granophyric to subophitic to intergranular to intersertal to very fine-grained poikilitic is found in the dynamic crystallization experiments. The number of nuclei, as deduced from the textures, increases as the melting temperature deceases from above the liquidus to below.

Lofgren, G. E.↗

Negative pressures and melting point depression in oxide-coated liquid metal droplets

Negative pressures and melting point depression in oxide-coated liquid metal droplets are studied. The calculation presented show the existence of large negative pressures when the oxide coating is thick enough. The change in the melting point caused by these negative pressures should be considered in studies of homogeneous crystal nucleation. Furthermore, since the negative pressure raises the entropy of the melt, it increases the entropy loss at the crystal-melt interface; the resulting increase of the surface tension could have a large effect on the homogeneous nucleation frequency.

Spaepen, F.↗