Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC SURFACES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

PHYSICAL ORIGIN OF DIFFERENCES AMONG VARIOUS MEASURES OF SOLAR MERIDIONAL CIRCULATION

We show that systematic differences between surface Doppler and magnetic element tracking measures of solar meridional flow can be explained by the effects of surface turbulent magnetic diffusion. Feature-tracking speeds are lower than plasma speeds in low and mid latitudes, because magnetic diffusion opposes poleward plasma flow in low latitudes whereas it adds to plasma flow at high latitudes. Flux-transport dynamo models must input plasma flow; the model outputs yield estimates of the surface magnetic feature tracking speed. We demonstrate that the differences between plasma speed and magnetic pattern speed in a flux-transport dynamo are consistent with the observed difference between these speeds.

79 ASTRONOMY AND ASTROPHYSICS↗

Equilibrium Reconstruction on the Large Helical Device

Equilibrium reconstruction is commonly applied to axisymmetric toroidal devices. Recent advances in computational power and equilibrium codes have allowed for reconstructions of three-dimensional fields in stellarators and heliotrons. We present the first reconstructions of finite beta discharges in the Large Helical Device (LHD). The plasma boundary and magnetic axis are constrained by the pressure profile from Thomson scattering. This results in a calculation of plasma beta without a-priori assumptions of the equipartition of energy between species. Saddle loop arrays place additional constraints on the equilibrium. These reconstruction utilize STELLOPT, which calls VMEC. The VMEC equilibrium code assumes good nested flux surfaces. Reconstructed magnetic fields are fed into the PIES code which relaxes this constraint allowing for the examination of the effect of islands and stochastic regions on the magnetic measurements.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Magnetic chaos healing in hte helical reversed-field pinch: indications from the volume-preserving field line tracing code NEMATO

The emergence of a self-organized reversed-field pinch (RFP) helical regime, first shown by 3D MHD numerical simulations, has been highlighted in the RFX-mod experiment at high current operation (IP above 1 MA). In fact, a quasi-stationary helical configuration spontaneously appears, characterized by strong internal electron transport barriers. In such regime electron temperature and density become, to a very good approximation, functions of the helical flux coordinate related to the dominant helical magnetic component. In addition, this regime is diagnosed to be associated with the topological transition to a single-helical-axis (SHAx) state, achieved after the expulsion of the separatrix of the dominant mode's magnetic island. The SHAx state is theoretically predicted to be resilient to the magnetic chaos induced by secondary modes. In this paper, we present initial results of the volume-preserving field line tracing code nemato [Finn J M and Chacon L 2005 Phys. Plasmas 12 054503] applied to study the magnetic topology resulting from 3D MHD simulations of the RFP. First, a successful 2D verification test of the code is shown, then, initial application to a systematic study of chaos healing in the helical RFP is discussed. The separatrix disappearance is confirmed to play an essential role for chaos healing. The triggering effect of a reversed magnetic shear for the formation of ordered surfaces within magnetic chaos is also diagnosed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Two-dimensional axisymmetric and three-dimensional helical equilibrium in the line-tied screw pinch

The line-tying condition at a conducting anode is shown to provide a localized modification to the well-understood 1-D screw pinch equilibrium in the presence of bulk plasma diamagnetism. Diamagnetic currents cannot flow near the conducting anode and are measured to disappear in a localized boundary layer, causing a weak mirror configuration that breaks 1-D equilibrium and causes large parallel pressure gradients suggestive of significant radial outflows. For sufficiently large plasma currents, the paramagnetic nature of parallel current drives the equilibrium to paramagnetism and destroys the mirror effect. At a critical plasma current, the axisymmetric equilibrium is found to transition to a long-lived, rotating, helical 3-D equilibrium state. Internal measurements of this state via multi-point correlation analysis techniques illustrate that it preserves the flux surfaces and pressure profile of the axisymmetric equilibrium. Measurements indicate that despite the fact that the flux surfaces wander at the anode, the line-tied boundary conditions are not necessarily violated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Magnetization switching using topological surface states

Topological surface states (TSSs) in a topological insulator are expected to be able to produce a spin-orbit torque that can switch a neighboring ferromagnet. This effect may be absent if the ferromagnet is conductive because it can completely suppress the TSSs, but it should be present if the ferromagnet is insulating. This study reports TSS-induced switching in a bilayer consisting of a topological insulator Bi 2 Se 3 and an insulating ferromagnet BaFe 12 O 19 . A charge current in Bi 2 Se 3 can switch the magnetization in BaFe 12 O 19 up and down. When the magnetization is switched by a field, a current in Bi 2 Se 3 can reduce the switching field by ~4000 Oe. The switching efficiency at 3 K is 300 times higher than at room temperature; it is ~30 times higher than in Pt/BaFe 12 O 19 . These strong effects originate from the presence of more pronounced TSSs at low temperatures due to enhanced surface conductivity and reduced bulk conductivity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Controlling tokamak geometry with three-dimensional magnetic perturbations

It is shown that small externally applied magnetic perturbations can significantly alter important geometric properties of magnetic flux surfaces in tokamaks. Through 3D shaping, experimentally relevant perturbation levels are large enough to influence turbulent transport and MHD stability in the pedestal region. It is shown that the dominant pitch-resonant flux surface deformations are primarily induced by non-resonant 3D fields, particularly in the presence of significant axisymmetric shaping. The spectral content of the applied 3D field can be used to control these effects.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Mapping of orthogonal 2D flux coordinates for two nearby magnetic X-points to logically rectangular domains

The behavior of plasmas in configurations with magnetic null points is of potential interest for a number of systems. Such nulls, sometimes referred to as X-points, a name strictly valid only for wellseparated nulls where magnetic separatrices cross at a right angle, may occur in only one component of the magnetic field, such as the poloidal field in a tokamak. Numerical simulations are often used to study and predict turbulence and transport in such systems. For cases with strong magnetic field such that the ion and electron gyro-frequencies are much larger that particle collision frequencies, there is a strong anisotropy in the plasma transport along the magnetic field compared to across the field. Because of the strong anisotropy, it is often advantageous for simulations to use a coordinate system based on magnetic flux surfaces together with a coordinate orthogonal to the flux surfaces. This report presents the topological considerations needed to construct the mapping on an orthogonal flux-surface mesh onto a logically rectangular domain often used in simulation codes of the divertor region of tokamaks having two nearby X-points, thus extending the mapping now common single-null or well-separated double nullpoint cases with one null located at the top and bottom of the device. This extension is especially relevant to study the capability of snowflake divertors in tokamaks for reducing the peak heat flux of exhaust plasma on the target plates [1-3]. The analysis presented here follows the analytic description of the poloidal magnetic field, B pol , near two closely-spaced X-points given by Ryutov [1-3]. This analysis is applicable to experimental devices where the two X-points are generated by distributed poloidal field coils and the plasma core current. This analytic description is used to identify topological features of an orthogonal mesh. A key parameter that specifies the various topology changes is the poloidal angle between the primary X-point and the second X-point, and the changes are associated with a set of critical angles. Understanding these changes leads to the final step in the mesh construction by identifying the locations of various regions or patches in configuration space and in a corresponding logically rectangular index space. UEDGE [4] and other 2-D fluid plasma simulation codes [5-7] describe the edge plasma of toroidally symmetric tokamak configurations with one or more X-points in a divertor region. The 2-D spatial mesh is usually based on a magnetic configuration produced by an MHD equilibrium code such as EFIT and written out as one or more “eqdsk” files. As illustrated in Fig. 1, the domain of the simulated plasma consists of several flux tubes bounded by poloidal magnetic flux surfaces. The number and spacing of the flux surfaces defines the “radial” resolution of the mesh. The “radial” direction is locally orthogonal to flux surfaces; the “poloidal” direction is locally parallel to flux surfaces. The “poloidal” resolution of the mesh is defined by the number of cells in the poloidal direction between adjacent flux surfaces. For boundary plasma transport codes used for tokamak configurations such as UEDGE it is convenient, though not necessary, to assume that all flux tubes have the same number of poloidal cells so the mesh is logically rectangular in index space, but does possess internal boundaries linking different sub-rectangles in the computational domain. The following sections of this report describe indexing schemes that map tokamak magnetic configurations with one or more x-points in the divertor region(s) onto a rectangular index space. Simulation results from the UEDGE code illustrate the schemes for a few configurations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Magnetic Field Penetration Technique to Study High Field Shielding of Multilayered Superconductors

The SIS structure which consists of alternative thin layers of superconductors and insulators on a bulk niobium has been proposed to shield niobium cavity surface from high magnetic field and hence increase the accelerating gradient. The study of the behavior of multilayer super-conductors in an external magnetic field is essential to optimize their SRF performance. In this work we report the development of a simple and efficient technique to measure penetration of magnetic field into bulk, thin film and multilayer superconductors. Experimental setup contains a small superconducting solenoid which can produce a parallel surface magnetic field up to 0.5 T and Hall probes to detect penetrated magnetic field across the superconducting sample. This system was calibrated and used to study the effect of niobium sample thickness on the field of full magnetic flux penetration. We determined the optimum thickness of the niobium substrate to fabricate the multilayer structure for the measurements in our setup. This technique was used to measure penetration fields of Nb₃Sn thin films and Nb₃Sn/Al₂O₃ multi-layers deposited on Al₂O₃ wafers.

Senevirathne, I. H.↗

Development of electron beam ion source charge breeder for rare isotopes at Californium Rare Isotope Breeder Upgrade

Recently, the Californium Rare Isotope Breeder Upgrade (CARIBU) to the Argonne Tandem Linac Accelerator System (ATLAS) was commissioned and became available for production of rare isotopes. Currently, an electron cyclotron resonance ion source is used as a charge breeder for CARIBU beams. To further increase the intensity and improve the purity of neutron-rich ion beams accelerated by ATLAS, we are developing a high-efficiency charge breeder for CARIBU based on an electron beam ion source (EBIS). The CARIBU EBIS charge breeder will utilize the state-of-the-art EBIS technology recently developed at Brookhaven National Laboratory (BNL). The electron beam current density in the CARIBU EBIS trap will be significantly higher than that in existing operational charge-state breeders based on the EBIS concept. The design of the CARIBU EBIS charge breeder is nearly complete. Long-lead components of the EBIS such as a 6-T superconducting solenoid and an electron gun have been ordered with the delivery schedule in the fall of 2011. Measurements of expected breeding efficiency using the BNL Test EBIS have been performed using a Cs{sup +} surface ionization ion source for external injection in pulsed mode. In these experiments we have achieved {approx}70% injection/extraction efficiency and breeding efficiency into the most abundant charge state of {approx}17%.

43 PARTICLE ACCELERATORS↗

A current-driven resistive instability and its nonlinear effects in simulations of coaxial helicity injection in a tokamak

An instability observed in whole-device, resistive magnetohydrodynamic simulations of the driven phase of coaxial helicity injection in the National Spherical Torus eXperiment is identified as a current-driven resistive mode in an unusual geometry that transiently generates a current sheet. The mode consists of plasma flow velocity and magnetic field eddies in a tube aligned with the magnetic field at the surface of the injected magnetic flux. At low plasma temperatures (∼10–20 eV), the mode is benign, but at high temperatures (∼100 eV) its amplitude undergoes relaxation oscillations, broadening the layer of injected current and flow at the surface of the injected toroidal flux and background plasma. The poloidal-field structure is affected and the magnetic surface closure is generally prevented while the mode undergoes relaxation oscillations during injection. This study describes the mode and uses linearized numerical computations and an analytic slab model to identify the unstable mode.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Comparisons between tokamak fueling of gas puffing and supersonic molecular beam injection in 2D simulations

Plasma fueling with high efficiency and deep injection is very important to enable fusion power performance requirements. It is a powerful and efficient way to study neutral transport dynamics and find methods of improving the fueling performance by doing large scale simulations. Two basic fueling methods, gas puffing (GP) and supersonic molecular beam injection (SMBI), are simulated and compared in realistic divertor geometry of the HL-2A tokamak with a newly developed module, named trans-neut, within the framework of BOUT++ boundary plasma turbulence code [Z. H. Wang et al., Nucl. Fusion 54, 043019 (2014)]. The physical model includes plasma density, heat and momentum transport equations along with neutral density, and momentum transport equations. Transport dynamics and profile evolutions of both plasma and neutrals are simulated and compared between GP and SMBI in both poloidal and radial directions, which are quite different from one and the other. It finds that the neutrals can penetrate about four centimeters inside the last closed (magnetic) flux surface during SMBI, while they are all deposited outside of the LCF during GP. It is the radial convection and larger inflowing flux which lead to the deeper penetration depth of SMBI and higher fueling efficiency compared to GP.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fixed boundary toroidal plasma equilibria with toroidal flows

The fixed boundary toroidal plasma equilibria with toroidal flows are investigated by solving the modified Grad-Shafranov equation numerically in the cylindrical coordinate system. For normal equilibrium configurations with geometry and profiles similar to usual tokamaks with no flow, it is found that the effect of flow is to lead to an outward shift of the magnetic flux surfaces, together with the profiles of pressure, and mass and current densities. The shifts could become significant when the toroidal flow Mach number exceeds 0.5. For non-conventional current profiles, even for the usual tokamak geometry, novel current reversal equilibrium configurations may result, sometimes with changed topology in the poloidal flux function. This change in the topology of plasma equilibrium can be attributed to the large toroidal flow. The computed results may correspond to situations of intense tangential injection during the low toroidal current phase in expected experimental situations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Power flow in magnetically insulated transmission lines with ion backscatter effects

Ion backscattering off of surfaces in magnetically insulated transmission lines (MITLs) is often ignored in kinetic simulations of MITL power flow. Backscattering reduces ion current losses and the surface impact heating, which dictates the rate at which surface-adsorbed contaminants are liberated into the anode–cathode gap. Backscatter probabilities are difficult to implement in a kinetic code because there are limited data for incident ion energies less than a few keV. This paper presents an analytic model based on the Rutherford scattering formula that reproduces the measured backscatter probabilities at high incident energies and transitions to the highly reflective behavior expected at low incident energies. The backscatter model is implemented in power flow simulations, which are validated with current loss experiments conducted on the 0.4 TW Mykonos accelerator at Sandia National Laboratories. This simulation setup is then used in a high-current Z-machine shot. In conclusion, backscatter effects are found to be unimportant in the low-current Mykonos regime but significantly reduce current losses at the Z-machine scale.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Numerical studies and metric development for validation of magnetohydrodynamic models on the HIT-SI experiment

We present application of three scalar metrics derived from the Biorthogonal Decomposition (BD) technique to evaluate the level of agreement between macroscopic plasma dynamics in different data sets. BD decomposes large data sets, as produced by distributed diagnostic arrays, into principal mode structures without assumptions on spatial or temporal structure. These metrics have been applied to validation of the Hall-MHD model using experimental data from the Helicity Injected Torus with Steady Inductive helicity injection experiment. Each metric provides a measure of correlation between mode structures extracted from experimental data and simulations for an array of 192 surface-mounted magnetic probes. Numerical validation studies have been performed using the NIMROD code, where the injectors are modeled as boundary conditions on the flux conserver, and the PSI-TET code, where the entire plasma volume is treated. Initial results from a comprehensive validation study of high performance operation with different injector frequencies are presented, illustrating application of the BD method. Using a simplified (constant, uniform density and temperature) Hall-MHD model, simulation results agree with experimental observation for two of the three defined metrics when the injectors are driven with a frequency of 14.5 kHz.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Magnetic transitions driven by temperature in surface oxidized Co{sub 0.10}Ni{sub 0.90}/Cu(001) ultrathin films

The magnetization of Co{sub 0.10}Ni{sub 0.90}/Cu(001) films before and after surface oxidization at 300 K is presented. Before the oxidization, the magnetization of the films in the thickness of 11 to 20 monolayers (ML) is in the in-plane direction at the temperature ranging from 140 K to 300 K. After the oxidization, the magnetizations of the films are in the in-plane direction at the temperature above 200 K, but transit to magnetization demolishment, in-plane-and-out-of-plane co-existence, spin reorientation transition, and coercivity enhancement, for films of 11, 12, 13, and above 15 ML, respectively. The blocking temperature of this film is also 200 K, which implies the transitions might be driven by the ordering of the antiferromagnetic surface oxides. The various magnetizations provide a model system for manipulating the magnetization direction, as well as a spin valve device by combination of the oxidized films.

36 MATERIALS SCIENCE↗

Asymmetrical two-dimensional magnetic lattices for ultracold atoms

A simple method for implementing an asymmetrical two-dimensional magnetic lattice is proposed. The asymmetrical two-dimensional magnetic lattice is created by periodically distributing nonzero magnetic minima across the surface of a magnetic thin film, where the magnetic patterns are formed by milling nxn square holes on the surface of the film. The method is proposed for trapping and confining quantum degenerate gases, such as Bose-Einstein condensates and ultracold Fermi gases, prepared in low-magnetic-field-seeking states. Analytical expressions and numerical simulation results of the magnetic local minima are shown where we analyze the effect of changing the magnetic lattice parameters, such as the separation of the holes, the hole size, and external bias magnetic fields, to maintain and locate the nonzero local minima at a suitable distance above the film surface to avoid the effect of Majorana spin flips and the Casimir-Polder potential.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Estimating T2 from surface NMR FID data using a forward model based on the full-Bloch equation

An integral component of the surface nuclear magnetic resonance forward model involves predicting the magnitude of the transverse magnetization following excitation. To predict the transverse magnetization, the Bloch equation must be solved. Traditional surface NMR forward models solve a simplified version of the Bloch equation where the relaxation terms are neglected. A shortcoming of this approach is that it can struggle to accurately describe the impact of relaxation during pulse effects. To address this concern, an alternative forward model based on solution of the full-Bloch equation is proposed. The advantage of the proposed scheme is that it implicitly accounts for relaxation during pulse effects, increases the flexibility to implement alternative parametrizations of the inverse model, and can readily describe an arbitrary excitation protocol given that it no longer requires closed form expressions of the transverse magnetizations. To demonstrate the potential of the updated forward modelling scheme, a novel approach for the inversion of complex-valued free-induction decay (FID) data is presented. The inverse model is reparametrized in order to produce depth profiles of the water content, T2* and T2. This approach has great potential to enhance the ability of FID measurements to provide insights into pore size and permeability as it can provide direct sensitivity to T2. In contrast, traditional approaches that employ a forward model based on the simplified Bloch equation and estimate only T2* are plagued by uncertainty surrounding the link between T2* and pore size/permeability. Synthetic and field results are presented to demonstrate the feasibility of the proposed forward model and FID inversion framework.

58 GEOSCIENCES↗

Contribution from Ising domains overlapping out-of-plane to perpendicular magnetic anisotropy in Mn 4 N thin films on MgO(001)

Single phase ε-Mn4N thin and ultrathin films are grown on MgO(001) using molecular beam epitaxy. Reflection high-energy electron diffraction and outof-plane x-ray diffraction measurements are taken for each sample in order to determine the in- and out-of-plane strain for each sample. Vibrating sample magnetometry and superconducting quantum interference device measurements, which are performed on the thin and ultrathin films respectively, are used to plot the magnetization of each sample versus both in- and out-of-plane $\vec H$-fields and to determine the magnitude of perpendicular magnetic anisotropy in these films. Three significant components of perpendicular magnetic anisotropy are observed in these films and are attributed to sample strain (1 component) and shape (2 components). Among these components, the most significant component (0.8 to 4.9 $\frac{Merg}{cm^3}$) is identified as a second term of shape anisotropy, which possesses a negative linear relationship with sample thickness over the range from 9 nm to 310 nm. Atomic (magnetic) force microscopy measurements show the presence of a surface localized magnetic polarization (22% to 82%), which increases with decreasing thickness, when the net magnetization of the films is zero. The second term of shape anisotropy as well as the surface localized polarization, which each depend on sample thickness, are each regarded as a consequence of Ising domains overlapping out-of-plane in these films.

Materials Science↗