Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC PROPERTIES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Cationic Ordering and Its Influence on the Magnetic Properties of Co-Rich Cobalt Ferrite Thin Films Prepared by Reactive Solid Phase Epitaxy on Nb-Doped SrTiO 3 (001)

Here, we present the (element-specific) magnetic properties and cation ordering for ultrathin Co-rich cobalt ferrite films. Two Co-rich Co x Fe 3-x O 4 films with different stoichiometry (x=1.1 and x=1.4) have been formed by reactive solid phase epitaxy due to post-deposition annealing from epitaxial CoO/Fe 3 O 4 bilayers deposited before on Nb-doped SrTiO 3 (001). The electronic structure, stoichiometry and homogeneity of the cation distribution of the resulting cobalt ferrite films were verified by angle-resolved hard X-ray photoelectron spectroscopy. From X-ray magnetic circular dichroism measurements, the occupancies of the different sublattices were determined using charge-transfer multiplet calculations. For both ferrite films, a partially inverse spinel structure is found with increased amount of Co 3+ cations in the low-spin state on octahedral sites for the Co 1.4 Fe 1.6 O 4 film. These findings concur with the results obtained by superconducting quantum interference device measurements. Further, the latter measurements revealed the presence of an additional soft magnetic phase probably due to cobalt ferrite islands emerging from the surface, as suggested by atomic force microscope measurements.

36 MATERIALS SCIENCE↗

Preparation and Magnetic Properties of MnBi-based Hard/Soft Composite Magnets

Bulk anisotropic composite magnets based on MnBi/Co(Fe) exhibiting the different morphology of the soft magnetic phase were prepared by powder metallurgy processing. First, single-phase MnBi bulk magnets were produced using a maximum energy product [(BH)m] of 6.3 MGOe at room temperature. The nanoscale soft phase with the different morphology was then added to form a composite magnet. It was observed that addition of magnetic soft-phase nanoparticles and nanoflakes causes a dramatic coercivity reduction. However, the addition of soft magnetic phase nanowires enhanced the composite magnetization without sacrificing the coercivity. Nevertheless, a kink was still observed on the demagnetization curves and the coercivity decreased when the soft-phase content was larger than 10 wt. %, which was caused by the agglomeration of the soft phase nanowires that also led to a decreased degree of texture.

MnBi, Magnet↗

Effect of processing hydrogen pressure on magnetic properties of HDDR Nd-Fe-B magnet

High coercivity and anisotropic Nd-Fe-B powders for making anisotropic bonded magnets have been prepared by hydrogenation-disproportionation-desorption-recombination (HDDR). In this work, we found that the processing hydrogen pressure is intimately correlated with the formation of c-axis crystal texture of Nd 2 Fe 14 B phase. There exists a critical hydrogen pressure, P crit , during hydrogen-disproportionation stage, that promotes the formation of c-axis crystal texture. When processing hydrogen pressure is higher than P crit , the formation of c-axis texture deteriorates and results in isotropic Nd-Fe-B magnetic powders. The existence of P crit is ascribed to the thermodynamics and kinetics origin during HDDR process.

36 MATERIALS SCIENCE↗

High temperature permeameter for measuring magnetic properties

Instrument for measuring magnetic permeability of materials undergoing heat treatment as method for monitoring stress relief and tempering is described. Procedure is based on magnetic potentiometer principle with yoke compensating coils to cancel effects of reluctance of yoke and joint gaps. Instrument is heated with specimen being heat treated.

Barranger, J. P.↗

Lodestone-explanation for magnetic properties and characterization of the source of magnetic hardening

The microstructure of Class I lodestones was investigated by X-ray diffraction and by optical and transmission electron microscopy, and the behavior of lodestone magnetization was studied at temperatures of 4 to 825 K. It was found that intense magnetization is associated with the gamma Fe2O3-Fe3O4 intergrowth. Thermal demagnetization of the lodestone studied was nearly complete at 300 C. The loss of natural remanence was found to be associated with transformation of gamma Fe2O3 to alpha Fe2O3.

Wasilewski, P. J.↗

Revisiting the link between magnetic properties and chemisorption at graphene nanoribbon zigzag edge

Graphene has received tremendous interest in both chemical and physical fields. Among different edges of the graphene system, the zigzag edge terminated graphene nanoribbons (ZGNRs) show unique magnetic properties in the antiferromagnetic (AFM) state. However, to date, the understanding of ZGNR chemical properties is mainly based on the partial radical concept, and in previous studies, the energy differences between the ferromagnetic (FM) and AFM states are smaller than experimental evidence. Here, we report that the strongly constrained and appropriately normed functional gives a significantly larger energy difference, which matches the experimental observation. Furthermore, utilizing the energetics in the large difference case, we propose a conceptual supplement to the previous partial radical concept: the overall stabilization of the AFM state compared to the nonmagnetic (NM) state consists of two parts that affect the adsorption energy conversely. The NM-FM energy differences will strengthen the adsorption, being in line with the previous partial radical concept. The FM-AFM energy differences will instead weaken the adsorption. Here, we perform calculations of H, OH, and LiS radical adsorption energies on ZGNRs to show that this weakening effect is numerically non-negligible: at least a ~0.2 eV difference in the adsorption energies is found. We expect that this refinement of the partial radical concept can provide a more comprehensive understanding of the chemical properties of ZGNRs. The differences in adsorption energies for the H, OH, and LiS radicals found here lead to significant changes in the predicted reactivity of the ZGNR models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Magnetic Properties and Electronic Structure of Co/Zr Multilayers

We investigate the magnetic and electronic properties of Co/Zr multilayers with an emphasis on the interfacial effects. The saturation magnetization, coercivity, and uniaxial anisotropy depend significantly on Co thickness. Spin-wave resonance modes were observed, and the change of resonant field as a function of mode number (n) obeys the so-called n{sup 2} law. The interlayer coupling constant was determined. The electronic properties of the interfacial alloys were studied using the WIEN2k code, employing the density functional theory. Calculations describe satisfactorily the observed magnetic behaviour. The influence of pressure on the magnetic properties of the interfacial Co{sub 1−x}Zr{sub x} alloys was investigated in which we demonstrate that the ferromagnetism is altered by pressure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural, Elastic, Electronic, and Magnetic Properties of a New Full-Heusler Alloy Mn{sub 2}MgGe: First-Principles Calculations

We present the first-principles calculations of the structural, elastic, electronic, and magnetic properties for a new full-Heusler alloy Mn{sub 2}MgGe. Both L2{sub 1} and XA structures are considered for both nonmagnetic and ferromagnetic states. The results show that the XA structure in the ferromagnetic state is the energetically most favorable for the full-Heusler alloy, and exhibits ductile behavior, significant anisotropy, and robust half-metallicity. The total spin moment is 2.000 μ{sub B} per formula unit in equilibrium state, which follows the Slater-Pauling rule. The spin-up electrons are metallic, whereas the spin-down bands are semiconductor with a gap of 1.086 eV at the equilibrium lattice constant of 6.066 Å. Half-metallicity is maintained within the lattice constant range from 5.6 to 6.1 Å. Our results indicate that Mn{sub 2}MgGe is an interesting candidate in the area of spintronics.

36 MATERIALS SCIENCE↗

Structural and magnetic properties of pristine and Fe-doped NiO nanoparticles synthesized by the co-precipitation method

Highlights: ► The prepared samples were characterized by XRD, TEM, HR-TEM techniques. ► Magnetic properties of the samples were compared. ► Surface spins frozen at lower temperatures resulted a spin glass. ► The samples show enhancement of coercivity with decreased temperature. -- Abstract: Ni{sub 1−x}Fe{sub x}O (x = 0 and 0.03) nanoparticles are synthesized by a chemical route. XRD and TEM measurements confirm phase purity and crystallinity of the nanoparticles. Fe substitution in NiO reduces considerably the average particle size of the nanoparticles. The pristine NiO sample with size 14 nm and Fe-substituted sample having size 7 nm show room temperature ferromagnetism. The pristine NiO having 31 nm size and Fe-substituted sample with size 25 nm are found to be antiferromagnetic. The M–H and M–T behavior of the pristine and Fe-doped samples are explained with a core–shell model with an antiferromagnetic core and a ferromagnetic shell. The disordered spins at the shell give rise to a spin-glass like frozen state below 10 K. The obtained room temperature ferromagnetism in the pristine and Fe-doped NiO has been attributed to particle size effect.

36 MATERIALS SCIENCE↗

Electronic and magnetic properties of iridium-based novel Heusler alloys

We report half-metallicity and magnetism including exchange splitting are the most significant physical parameters to predict and design a candidate material for spintronic applications. We report here an ab-initio investigation on chemical formation and dynamical stability along with electronic structure and magnetic properties of Ir 2 Cr (Si, Ge) and IrRhCr (Si, Ge) Heusler alloys. The negative formation and cohesive energies with positive phonon dispersions confirm the stabilities of these alloys. Electronic structure calculations reveal that Ir 2 Cr (Si, Ge) and IrRhCrSi alloys are half-metallic ferromagnets with unprecedented exchange splitting. In addition, IrRhCrGe also shows semi-metallic nature. All of these materials follow Slater Pauling rule with large magnetic moments and 100% spin-polarization. With Cr bearing the majority of the local magnetic moment and exchange splitting, a ferromagnetic state is more stable than a nonmagnetic state. The electronic charge distribution and population analysis confirm mixed ionic and covalent bonding. The magnetocrystalline anisotropy energy, with the easy magnetization along the [1 1 1] direction, is significantly high in Ir 2 CrGe. Elastic constants such as shear (G), bulk (B), Young’s moduli, and Poisson’s ratio indicate that the IrRhCrSi and IrRhCrGe alloys are mechanically stable, and Ir 2 CrSi and Ir 2 CrGe are mechanically unstable. The Pugh’s (B/G) and Poisson’s ratios confirm that the stable alloys are ductile.

36 MATERIALS SCIENCE↗

Bulk magnetization properties of the Fra Mauro and Reiner Gamma Formations

In the reported investigation, bulk magnetization properties within two lunar surface geologic units have been inferred using low-altitude, high-resolution Apollo 16 subsatellite magnetometer data. On the basis of correlations of mapped anomalies with relatively surficial units on the central near side, a surface plate model with thickness much less than the subsatellite altitude was adopted and was used to represent the sources of largest anomalies. The results strongly suggest that directional coherence of the surface density of magnetization can occur over horizontal scales up to 100 km. Tentative evidence for a lack of directional coherence on scales greater than 100 km was found in the case of the Fra Mauro Formation.

Hood, L. L.↗

Comparison of the magnetic properties and Mossbauer analysis of glass from the Cretaceous-Tertiary boundary, Beloc, Haiti, with tektites

The magnetic properties of black Beloc glass have been measured. The Curie constant, the magnetization, and the magnetic susceptibility of the Beloc glass fall within the known ranges observed for tektites. However, the temperature-independent component of the magnetic susceptibility is slightly higher than that found for tektites. Moreover, it is not possible to match the experimental magnetic data for the Beloc glass with the calculated values using the previously reported Fe(3+)/Fe(2+) ratio of 0.7. The oxidation state of Fe was therefore redetermined by Mossbauer measurements, and the Fe(3+)/Fe(2+) ratio was found to be 0.024 plus or minus 0.015. Using the redetermined value of the ratio, the magnetic parameters were again calculated using formulas that are applicable to tektites, and good agreement was found between the calculated and experimental values. The experimental magnetic measurements and the redetermined Fe(3+)/Fe(2+) ratio of the Beloc glass specimens are essentially the same as those found for tektite glass.

Thorpe, A. N.↗

Control of Octahedral Tilts and Magnetic Properties of Perovskite Oxide Heterostructures by Substrate Symmetry

Perovskite transition-metal oxides are networks of corner-sharing octahedra whose tilts and distortions are known to affect their electronic and magnetic properties. We report calculations on a model interfacial structure which avoids chemical influences and show that the symmetry mismatch imposes an interfacial layer with distortion modes that do not exist in either bulk material, creating new interface properties driven by symmetry alone. Depending on the resistance of the octahedra to deformation, the interface layer can be as small as one unit cell or extend deep into the thin film.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structural and magnetic properties of the new cobaltate series (BaSr)4-xLa2xCo4O15

We report the structural and magnetic properties of a new class of cobaltates with the chemical formula (BaSr)4-xLa2xCo4O15 (x = 0, 0.5 and 1). These compounds crystallize in a hexagonal structure in which cobalt ions are distributed among two distinct crystallographic sites with dierent oxygen coordination. Three Co{O tetrahedra and one octahedron are linked by shared oxygen atoms to form Co4O15 clusters, which are packed together into a honeycomb-like network. Partial substitution of Sr and/or Ba atoms by La allows one to adjust the degree of Co valence mixing, but all compositions remain subject to a random distribution of charge. Magnetic susceptibility together with neutron scattering measurements reveal that all studied specimens are characterized by competing ferro- and antiferro-magnetic exchange interactions that give rise to a three dimensional Heisenberg spin-glass state. Neutron spectroscopy shows a clear trend of slowing down of spindynamics upon increasing La concentration, suggesting a reduction in charge randomness in the doped samples.

Garlea, Elena↗

First-Principle Calculation of Electronic Structures and Magnetic Properties of Heusler Alloys Co{sub 2}ZrPb and Zr{sub 2}MnBa

Using first-principle method of density functional theory (DFT), we have investigated the underlying mechanism related to the electronic and magnetic properties of novel full Heusler alloys Co{sub 2}ZrPb and Zr{sub 2}MnB. Our results show that compound Zr{sub 2}MnB is a nonmagnetic semiconductor whereas Co{sub 2}ZrPb is half metallic a magnetic moment of 2 μ{sub B} per formula unit. It exhibits a large spin gap of 0.334 eV for equilibrium lattice constant and has excellent half-metallic ferrimagnetism with 100% spin polarization at the Fermi level. The half-metallicity of Co{sub 2}ZrPb is stable against lattice change of −2.6 to 0.83%. The Co-based Heusler alloys are expected to be ideal candidates for spintronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic Structures, Magnetic Properties and Half-Metallicity of Heusler Compounds Hf{sub 2}VZ (Z = Ga, In, Tl, Si, Ge, Sn and Pb): First-Principle Calculations

We investigate the electronic structures, magnetic properties and half-metallicity of Heusler compounds Hf{sub 2}VZ (Z = Ga, In, Tl, Si, Ge, Sn and Pb) with Hg{sub 2}CuTi-type structure by using the first-principle calculations based on density-functional theory. It is found that the equilibrium lattice constants of Hf{sub 2}VZ (Z = Ga, In, Tl, Si, Ge, Sn and Pb) compounds are 6.68, 6.88, 6.91, 6.57, 6.63, 6.85 and 6.94 Å, respectively. Hf{sub 2}VZ (Z = Ga, In, Tl, Si and Sn) compounds exhibit half-metallicity at their respective equilibrium lattice constants. Hf{sub 2}VGe and Hf{sub 2}VPb do not exhibit half-metallicity at their equilibrium lattice constants but can present the half-metallicity when the lattice constant decreases to 6.51 and 6.71 Å, respectively. In case of the lattice thermal expansion, the half-metallicity can be kept in the range of 6.30∼ 7.27, 6.36∼ 7.80, 6.46∼ 7.35, 6.00∼ 6.70 and 6.10∼ 6.95 Å (lattice constant) for Hf{sub 2}VZ (Z = Ga, In, Tl, Si and Sn). Under the unaxial strain, the half-metallicity can still be kept for Hf{sub 2}VZ (Z = Ga, In, Tl) when the lattice distortion is up to ± 10% (c/a) and be kept for Hf{sub 2}VZ (Z = Si, Sn) when the lattice distortion is 0.88∼ 1.09, 0.91∼ 1.09 (c/a). For the Hf{sub 2}VZ compounds with half-metallicity, the total magnetic moment is 2 μ{sub B} when Z is the third main group elements and is 1 μ{sub B} when Z is the fourth main group elements. The Hf{sub 2}VZ compounds with half-metallicity obey the Slater-Pauling formula: M{sub t} = 18 − Z{sub t} rule.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Growth temperature effect on the structural and magnetic properties of Fe{sub 3}O{sub 4} films grown by the self-template method

We have investigated the effect of growth temperature on the structure, surface morphology, and magnetic properties of Fe{sub 3}O{sub 4} thin films grown on SrTiO{sub 3}(001) substrates by a self-template method. To eliminate the intermixing of (001) and (111) orientations that usually occurs in spinel films grown on perovskite substrates, a thin self-template layer of (001)-oriented Fe{sub 3}O{sub 4} was deposited on a SrTiO{sub 3}(001) substrate at 400 °C prior to the main film growth at temperatures of up to 1100 °C. Increasing the growth temperature from 400 °C to 1100 °C resulted in greatly improved crystallinity of the Fe{sub 3}O{sub 4} thin films, with the rocking curve width dropping from 1.41° to 0.28°. Surface analysis by atomic force microscopy showed that raising the growth temperature increased the grain size and the surface roughness, ultimately leading to the formation of regular nanopyramid arrays at 1100 °C. The surface roughening and pyramid formation are caused by the dominance of the lowest surface energy spinel (111) crystal facet. The nanopyramids were fully relaxed but still perfectly (001)-oriented in the out-of-plane direction. The largest pyramids had the lowest coercivity due to a reduction of the demagnetization effect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗