Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC FLUX”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Magneto-optical study of Nb thin films for superconducting qubits

Among the recognized sources of decoherence in superconducting qubits, the spatial inhomogeneity of the superconducting state and the possible presence of magnetic-flux vortices remain comparatively underexplored. Niobium is commonly used as a structural material in transmon qubits that host Josephson junctions, and excess dissipation anywhere in the transmon can become a bottleneck that limits overall quantum performance. The metal/substrate interfacial layer may simultaneously host pair-breaking loss channels (e.g., two-level systems, TLS) and control thermal transport, thereby affecting dissipation and temperature stability. Here, we use quantitative magneto-optical imaging of the magnetic-flux distribution to characterize the homogeneity of the superconducting state and the critical current density, $j_{c}$, in niobium films fabricated under different sputtering conditions. The imaging reveals distinct flux-penetration regimes, ranging from a nearly ideal Bean critical state to strongly nonuniform thermo-magnetic dendritic avalanches. By fitting the measured magnetic-induction profiles, we extract $j_{c}$ and correlate it with film physical properties and with measured qubit internal quality factors. Our results indicate that the Nb/Si interlayer can be a significant contributor to decoherence and should be considered an important factor that must be optimized.

Datta, Amlan [Ames Lab; Iowa State U.]↗
NASA NTRS1988

Influence of heating rate on the condensational instability

Analysis and numerical simulation are used to determine the effect that various heating rates have on the linear and nonlinear evolution of a typical plasma within a solar magnetic flux tube subject to the condensational instability. It is found that linear stability depends strongly on the heating rate. The results of numerical simulations of the nonlinear evolution of the condensational instability in a solar magnetic flux tube are presented. Different heating rates lead to quite different nonlinear evolutions, as evidenced by the behavior of the global internal energy.

Dahlburg, R. B.↗
DOE OSTI2020

Near-axis expansion of stellarator equilibrium at arbitrary order in the distance to the axis

A direct construction of equilibrium magnetic fields with toroidal topology at arbitrary order in the distance from the magnetic axis is carried out, yielding an analytical framework able to explore the landscape of possible magnetic flux surfaces in the vicinity of the axis. This framework can provide meaningful analytical insight into the character of high-aspect-ratio stellarator shapes, such as the dependence of the rotational transform and the plasma beta limit on geometrical properties of the resulting flux surfaces. The approach developed here is based on an asymptotic expansion on the inverse aspect ratio of the ideal magnetohydrodynamics equation. The analysis is simplified by using an orthogonal coordinate system relative to the Frenet–Serret frame at the magnetic axis. The magnetic field vector, the toroidal magnetic flux, the current density, the field line label and the rotational transform are derived at arbitrary order in the expansion parameter. Moreover, a comparison with a near-axis expansion formalism employing an inverse coordinate method based on Boozer coordinates (the so-called Garren–Boozer construction) is made, where both methods are shown to agree at lowest order. Finally, as a practical example, a numerical solution using a W7-X equilibrium is presented, and a comparison between the lowest-order solution and the W7-X magnetic field is performed.

Physics↗
DOE OSTI2017

Observation of a 3D Magnetic Null Point

We describe high-resolution observations of a GOES B-class flare characterized by a circular ribbon at the chromospheric level, corresponding to the network at the photospheric level. We interpret the flare as a consequence of a magnetic reconnection event that occurred at a three-dimensional (3D) coronal null point located above the supergranular cell. The potential field extrapolation of the photospheric magnetic field indicates that the circular chromospheric ribbon is cospatial with the fan footpoints, while the ribbons of the inner and outer spines look like compact kernels. We found new interesting observational aspects that need to be explained by models: (1) a loop corresponding to the outer spine became brighter a few minutes before the onset of the flare; (2) the circular ribbon was formed by several adjacent compact kernels characterized by a size of 1″–2″; (3) the kernels with a stronger intensity emission were located at the outer footpoint of the darker filaments, departing radially from the center of the supergranular cell; (4) these kernels started to brighten sequentially in clockwise direction; and (5) the site of the 3D null point and the shape of the outer spine were detected by RHESSI in the low-energy channel between 6.0 and 12.0 keV. Taking into account all these features and the length scales of the magnetic systems involved in the event, we argue that the low intensity of the flare may be ascribed to the low amount of magnetic flux and to its symmetric configuration.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Transport coefficient sensitivities in a semi-analytic model for magnetized liner inertial fusion

Performance of magnetized liner inertial fusion (MagLIF) experiments is highly dependent on transport processes including magnetized heat flows and magnetic flux losses. Magnetohydrodynamic simulations used to model these experiments require a choice of model for the transport coefficients, which are the constants of proportionality relating driving terms, such as temperature gradients and currents, to the associated heat and magnetic field transport. The coefficients have been the subject of repeated recalculation using various methods throughout the years. Using a semi-analytic MagLIF model, we compare models for the transport coefficients. The choice of model modifies magnetic-flux losses caused by the Nernst thermoelectric effect and thermal conduction losses. We present simulated results from parameter scans conducted in order to compare the effects of the different models on parameters of interest in MagLIF. In some regions of parameter space, discrepancies of up to 38% are found in integrated quantities like the fusion yield. These results may serve as a guide for experimental validation of the various models, particularly as laser preheat energies and initial axial field strengths are increased on MagLIF experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2014

Ultra-high quality factors in superconducting niobium cavities in ambient magnetic fields up to 190 mG

Ambient magnetic field, if trapped in the penetration depth, leads to the residual resistance and therefore sets the limit for the achievable quality factors in superconducting niobium resonators for particle accelerators. Here, we show that a complete expulsion of the magnetic flux can be performed and leads to: (1) record quality factors Q > 2 × 10{sup 11} up to accelerating gradient of 22 MV/m; (2) Q ∼ 3 × 10{sup 10} at 2 K and 16 MV/m in up to 190 mG magnetic fields. This is achieved by large thermal gradients at the normal/superconducting phase front during the cooldown. Our findings open up a way to ultra-high quality factors at low temperatures and show an alternative to the sophisticated magnetic shielding implemented in modern superconducting accelerators.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Qubit devices comprising one or more polycrystalline or single crystalline spin-triplet superconductors

A qubit device may include a closed loop comprising one or more polycrystalline spin-triplet superconductors. The closed loop may maintain a half-quantum magnetic flux in a ground state. A qubit device may include a closed loop comprising one or more single crystalline spin-triplet superconductors connected by one or more s-wave superconductors. The closed loop may maintain a half-quantum magnetic flux in a ground state.

Li, Yufan↗
DOE OSTI2014

Modeling MHD accretion-ejection—from the launching area to propagation scales

We present the results of axisymmetric magnetohydrodynamic simulations investigating the launching of jets and outflows from a magnetically diffusive accretion disk. The time evolution of the disk structure is self-consistently taken into account. In contrast to previous works, we have applied spherical coordinates for the numerical grid, implying substantial benefits concerning the numerical resolution and the stability of the simulation. Due to the new setup, we were able to run simulations for more than 150,000 dynamical times on a domain extending 1500 inner disk radii with a resolution of up to 24 cells per disk height in the inner disk. Depending on the disk magnetization, jet launching occurs in two different but complementary regimes—jets driven predominantly by centrifugal or magnetic forces. These regimes differ in the ejection efficiency concerning mass, energy, and angular momentum. We show that it is the actual disk magnetization and not so much the initial magnetization that best describes the disk-jet evolution. Considering the actual disk magnetization, we also find that simulations starting with different initial magnetization evolve in a similar—typical—way, due to advection and diffusion, as the magnetic flux in the disk evolves in time. Exploring a new, modified diffusivity model, we confirm the self-similar structure of the global jet-launching disk, obtaining power laws for the radial profiles of the disk physical variables such as density, magnetic field strength, or accretion velocity.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2019

Correlation Between Microstructure and In-Field Performance of Zr-Added REBCO Coated Conductors Made by Advanced MOCVD

In this paper, we present correlation features between critical current density (J c ) and microstructural characteristics of Zr-added (0, 5, and 15 mol.%) REBa 2 Cu 3 O 7-x (REBCO and RE = rare earth) coated conductors fabricated by the novel advanced metal organic chemical vapor deposition technique. The J c along the tape normal (~ B || c-axis) measured by a vibrating sample magnetometer at 30 and 65 K and magnetic flux density range of 0-14 T was used for qualitative comparison of different Zr-added REBCO tapes. It is found that tapes with enhanced in-field J c exhibit a rise of critical current (plateau or fishtail effect) at magnetic flux density 1-8 T and temperatures 65 K. The TEM microstructure analysis indicates that the plateau effect is not the intrinsic property of REBCO matrix but depends on size distribution and density of BaZrO 3 (BZO) self-assembled nanocolumns. Two types of BZO microstructures have been identified: one with uniform BZO diameter 4-7 nm, whereas some films exhibit bottle-shaped BZO nanocolumns with alternating wide and narrow sections, 7-13 and 4-6 nm, respectively. The non-uniform shape and broad size distribution of BZO nanocolumns are correlated to more vortex pinning strength and matching field.

2G high-temperature superconductor (2GHTS)↗
NASA NTRS2016

Coronal Jets from Minifilament Eruptions in Active Regions

Solar coronal jets are transient (frequently of lifetime approx.10 min) features that shoot out from near the solar surface, become much longer than their width, and occur in all solar regions, including coronal holes, quiet Sun, and active regions (e.g., Shimojo et al. 1996, Cirtain et al. 2007). Sterling et al. (2015) and other studies found that in coronal holes and in quiet Sun the jets result when small-scale filaments, called "minifilaments" erupt onto nearby open or high-reaching field lines. Additional studies found that coronal-jet-onset locations (and hence presumably the minifilament-eruption-onset locations) coincided with locations of magnetic-flux cancelation. For active region (AR) jets however the situation is less clear. Sterling et al. (2016) studied jets in one active region over a 24-hour period; they found that some AR jets indeed resulted from minifilament eruptions, usually originating from locations of episodes of magnetic-flux cancelation. In some cases however they could not determine whether flux was emerging or canceling at the polarity inversion line from which the minifilament erupted, and for other jets of that region minifilaments were not conclusively apparent prior to jet occurrence. Here we further study AR jets, by observing them in a single AR over a one-week period, using X-ray images from Hinode/XRT and EUV/UV images from SDO/AIA, and line-of-sight magnetograms and white-light intensity-grams from SDO/HMI. We initially identified 13 prominent jets in the XRT data, and examined corresponding AIA and HMI data. For at least several of the jets, our findings are consistent with the jets resulting from minifilament eruptions, and originating from sites of magnetic-field cancelation.

region↗
NASA NTRS1982

Investigation of geomagnetic field forecasting and fluid dynamics of the core

It was established that the total absolute magnetic flux crossing the core- mantle boundary has been a constant of the core motion for the last 50 years. This provides a scalar constraint that could be added to the geometric modelling procedure. The GSFC 8 8/80 model is being evaluated. The absolute magnetic flux linking the CMB to that model was plotted as a function of time during the span covered by the data, and increasing truncation level. The inclusion of the standard error of each Gauss coefficient derived from the statistics of fit in the GSFC 9/80 model is useful. The magnitude and sense (upwelling or downe welling) of vertical fluid motion adjacent to the core-mantle boundary was calculated using the model. Standard errors were found to be sufficiently small at all but one or two of the 40 or more critical points of B sub r. They do not nearly overlap the value gamma u/gamma r = 0. It is concluded that the core is upwelling and downwelling at an observationally detectable level.

Benton, E. R.↗
DOE OSTI2015

Fluxons in a triangular set of coupled long Josephson junctions

We report results of an analysis of the dynamics of magnetic flux solitons in the system of three long Josephson junctions between three bulk superconductors that form a prism. The system is modeled by coupled sine-Gordon equations for the phases of the junctions. The Aharonov-Bohm constraint takes into account the axial magnetic flux enclosed by the prism and reduces the system from three independent phases to two. The equations of motion for the phases include dissipative terms, and a control parameter δ which accounts for the deviation of the enclosed flux from half a quantum. Analyzing the effective potential of the coupled equations, we identify different species of topological and non-topological phase solitons (fluxons) in this system. In particular, subkinks with fractional topological charges ±1/3 and ±2/3, confined inside integer-charge fluxons, may be mapped onto the root diagrams for mesons and baryons in the original quark model of hadrons. Solutions for straight-line kinks and for two types of non-topological solitons are obtained in an explicit analytical form. Numerical tests demonstrate that the former species is unstable against breakup into pairs of separating single-fluxon kinks. The non-topological kinks feature metastability, eventually breaking up into fluxon-antifluxon pairs. Free fractional-fluxon kinks, that connect different potential minima and are, accordingly, pulled by the potential difference, are also considered. Using the momentum-balance method, we predict the velocity at which these kinks should move in the presence of the dissipation. Numerical tests demonstrate that the analysis predicts the velocity quite closely. Higher-energy static solutions for all of the stable kink types mentioned above, as well as kinks connecting false vacua, are found by means of the shooting method. Inelastic collisions among the stable fractional and single-fluxon kinks are investigated numerically.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2016

TORQUE ENHANCEMENT, SPIN EQUILIBRIUM, AND JET POWER FROM DISK-INDUCED OPENING OF PULSAR MAGNETIC FIELDS

The interaction of a rotating star’s magnetic field with a surrounding plasma disk lies at the heart of many questions posed by neutron stars in X-ray binaries. We consider the opening of stellar magnetic flux due to differential rotation along field lines coupling the star and disk, using a simple model for the disk-opened flux, the torques exerted on the star by the magnetosphere, and the power extracted by the electromagnetic wind. We examine the conditions under which the system enters an equilibrium spin state, in which the accretion torque is instantaneously balanced by the pulsar wind torque alone. For magnetic moments, spin frequencies, and accretion rates relevant to accreting millisecond pulsars, the spin-down torque from this enhanced pulsar wind can be substantially larger than that predicted by existing models of the disk–magnetosphere interaction, and is in principle capable of maintaining spin equilibrium at frequencies less than 1 kHz. We speculate that this mechanism may account for the non-detection of frequency increases during outbursts of SAX J1808.4-3658 and XTE J1814-338, and may be generally responsible for preventing spin-up to sub-millisecond periods. If the pulsar wind is collimated by the surrounding environment, the resulting jet can satisfy the power requirements of the highly relativistic outflows from Cir X-1 and Sco X-1. In this framework, the jet power scales relatively weakly with accretion rate, L{sub j}∝ M-dot {sup 4/7}, and would be suppressed at high accretion rates only if the stellar magnetic moment is sufficiently low.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Magnetic nulls in interacting dipolar fields

The prominence of nulls in reconnection theory is due to the expected singular current density and the indeterminacy of field lines at a magnetic null. Electron inertia changes the implications of both features. Magnetic field lines are distinguishable only when their distance of closest approach exceeds a distance Δ d . Electron inertia ensures Δ d ≳ c/ω pe . The lines that lie within a magnetic flux tube of radius Δ d at the place where the field strength B is strongest are fundamentally indistinguishable. If the tube, somewhere along its length, encloses a point where B = 0 vanishes, then distinguishable lines come no closer to the null than ≈ (a 2 c/ω pe ) 1/3 , where a is a characteristic spatial scale of the magnetic field. Here, the behaviour of the magnetic field lines in the presence of nulls is studied for a dipole embedded in a spatially constant magnetic field. In addition to the implications of distinguishability, a constraint on the current density at a null is obtained, and the time required for thin current sheets to arise is derived.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1980

Parametric dependence of ion temperature and electron density in the SUMMA hot-ion plasma using laser light scattering and emission spectroscopy

Hot-ion plasma experiments were conducted in the NASA Lewis SUMMA facility. A steady-state modified Penning discharge was formed by applying a radially inward dc electric field of several kilovolts near the magnetic mirror maxima. Results are reported for a hydrogen plasma covering a wide range in midplane magnetic flux densities from 0.5 to 3.37 T. Input power greater than 45 kW was obtained with water-cooled cathodes. Steady-state plasmas with ion kinetic temperatures from 18 to 830 eV were produced and measured spectroscopically. These ion temperatures were correlated with current, voltage, and magnetic flux density as the independent variables. Electron density measurements were made using an unusually sensitive Thomson scattering apparatus. The measured electron densities range from 2.1 x 10 to the 11th to 6.8 x 10 to the 12th per cu cm.

Snyder, A.↗
DOE OSTI2017

Imaging Observations of Magnetic Reconnection in a Solar Eruptive Flare

Solar flares are among the most energetic events in the solar atmosphere. It is widely accepted that flares are powered by magnetic reconnection in the corona. An eruptive flare is usually accompanied by a coronal mass ejection, both of which are probably driven by the eruption of a magnetic flux rope (MFR). Here we report an eruptive flare on 2016 March 23 observed by the Atmospheric Imaging Assembly on board the Solar Dynamics Observatory . The extreme-ultraviolet imaging observations exhibit the clear rise and eruption of an MFR. In particular, the observations reveal solid evidence of magnetic reconnection from both the corona and chromosphere during the flare. Moreover, weak reconnection is observed before the start of the flare. We find that the preflare weak reconnection is of tether-cutting type and helps the MFR to rise slowly. Induced by a further rise of the MFR, strong reconnection occurs in the rise phases of the flare, which is temporally related to the MFR eruption. We also find that the magnetic reconnection is more of 3D-type in the early phase, as manifested in a strong-to-weak shear transition in flare loops, and becomes more 2D-like in the later phase, as shown by the apparent rising motion of an arcade of flare loops.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2014

Modeling MHD accretion-ejection: episodic ejections of jets triggered by a mean-field disk dynamo

We present MHD simulations exploring the launching, acceleration, and collimation of jets and disk winds. The evolution of the disk structure is consistently taken into account. Extending our earlier studies, we now consider the self-generation of the magnetic field by an α{sup 2}Ω mean-field dynamo. The disk magnetization remains on a rather low level, which helps to evolve the simulations for T > 10, 000 dynamical time steps on a domain extending 1500 inner disk radii. We find the magnetic field of the inner disk to be similar to the commonly found open field structure, favoring magneto-centrifugal launching. The outer disk field is highly inclined and predominantly radial. Here, differential rotation induces a strong toroidal component, which plays a key role in outflow launching. These outflows from the outer disk are slower, denser, and less collimated. If the dynamo action is not quenched, magnetic flux is continuously generated, diffuses outward through the disk, and fills the entire disk. We have invented a toy model triggering a time-dependent mean-field dynamo. The duty cycles of this dynamo lead to episodic ejections on similar timescales. When the dynamo is suppressed as the magnetization falls below a critical value, the generation of the outflows and also accretion is inhibited. The general result is that we can steer episodic ejection and large-scale jet knots by a disk-intrinsic dynamo that is time-dependent and regenerates the jet-launching magnetic field.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2015

Quantifying three dimensional reconnection in fragmented current layers

There is growing evidence that when magnetic reconnection occurs in high Lundquist number plasmas such as in the Solar Corona or the Earth's Magnetosphere it does so within a fragmented, rather than a smooth current layer. Within the extent of these fragmented current regions, the associated magnetic flux transfer and energy release occur simultaneously in many different places. This investigation focusses on how best to quantify the rate at which reconnection occurs in such layers. An analytical theory is developed which describes the manner in which new connections form within fragmented current layers in the absence of magnetic nulls. It is shown that the collective rate at which new connections form can be characterized by two measures; a total rate which measures the true rate at which new connections are formed and a net rate which measures the net change of connection associated with the largest value of the integral of E{sub ||} through all of the non-ideal regions. Two simple analytical models are presented which demonstrate how each should be applied and what they quantify.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗