Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LIGNIN”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Effect of Using Regenerated Combined FAU and MOR Zeolites as Catalysts during the Pyrolysis of Kraft Lignin

The SiO 2 /Al 2 O 3 mole ratio, pore size, and acid sites are the key parameters of zeolite’s activity in lignin pyrolysis. In this study, the comparison of individual Y and M zeolites, the combined ‘Y + M’ sample after regeneration, and their effect on lignin pyrolysis were studied in five cycles (regeneration and reuse). The results were explained using Brunauer, Emmet, and Teller (BET), micropore surface area (MSA), and total acid sites (TAS) analyses. In comparison with the individual Y or M zeolite sample, the consistent higher catalytic activities of the combined ‘Y + M’ sample in repeated cycles were observed. Pyrolysis heavy oils were characterized by nuclear magnetic resonance (NMR) spectroscopy and gel permeation chromatography (GPC). The NMR analyses revealed that with increased zeolite regeneration cycles, p-hydroxy phenyl and methoxyl groups increased. Decreases in guaiacyl phenolic hydroxyl were less for the combined ‘Y + M’ sample than the individual Y and M zeolites. Lower weight average (M w ) of heavy oil for the combined ‘Y + M’ sample indicated the enhanced cleavage of lignin structures in pyrolysis. These results support the higher catalytic activity of regenerated zeolites for the combined ‘Y + M’ sample compared with individual Y and M zeolites due to the improved MSA and TAS.

59 BASIC BIOLOGICAL SCIENCES↗

Ultraclean hybrid poplar lignins via liquid–liquid fractionation using ethanol–water solutions

As recovered from the byproducts stream of a cellulosic ethanol biorefinery, the renewable biopolymer lignin is too impure and polydisperse for many proposed applications. By mixing a hybrid poplar lignin with hot ethanol–water solutions, two liquid phases, one polymer-rich and one solvent-rich, are created. This liquid–liquid equilibrium phenomenon was used to generate solvated (and thus liquefied) lignin fractions of controlled molecular weight for which the impurities analyses for sugars and ash were near or below the limits of detection. Furthermore, those carbohydrates and metals impurities end up highly concentrated in a single process stream also having potential value.

09 BIOMASS FUELS↗

Adsorption Properties of Lignin-derived Activated Carbon Fibers (LACF)

The object of this CRADA project between Oak Ridge National Laboratory (ORNL) and United Technologies Research Center (UTRC) is the characterization of lignin-derived activated carbon fibers (LACF) and determination of their adsorption properties for volatile organic compounds (VOC). Carbon fibers from lignin raw materials were manufactured at Oak Ridge National Laboratory (ORNL) using the technology previously developed at ORNL. These fibers were physically activated at ORNL using various activation conditions, and their surface area and pore-size distribution were characterized by gas adsorption. Based on these properties, ORNL did down-select five differently activated LACF materials that were delivered to UTRC for measurement of VOC adsorption properties. UTRC used standard techniques based on breakthrough curves to measure and determine the adsorption properties of indoor air pollutants (IAP) - namely formaldehyde and carbon dioxide - and to verify the extent of saturated fiber regenerability by thermal treatments. The results are summarized as follows: (1) ORNL demonstrated that physical activation of lignin-derived carbon fibers can be tailored to obtain LACF with surface areas and pore size distributions matching the properties of activated carbon fibers obtained from more expensive, fossil-fuel precursors; (2) UTRC investigated the LACF potential for use in air cleaning applications currently pursued by UTRC, such as building ventilation, and demonstrated their regenerability for CO2 and formaldehyde, (3) Both partners agree that LACF have potential for possible use in air cleaning applications.

36 MATERIALS SCIENCE↗

Catalytic Depolymerization and Upgrading of Lignin for Vanillin Production: Cooperative Research and Development Final Report, CRADA Number CRD-14-545

Examine catalytic conversion of lignin using multifunctional catalysts that are able to depolymerize and oxidize lignin to a vanillin-rich stream. Examine separation processes for isolation of vanillin from product mixtures. Conduct preliminary experiments to determine if deconstructed lignin streams can be metabolized by Pseudomonas putida.

09 BIOMASS FUELS↗

"Lignin First" Catalytic Biomass Fractionation: Cooperative Research and Development (Final Report)

In this work, a continuous zwitterionic chromatography using simulated moving beds will be conducted to separate Li and Mg from brines. The existing program that ExxonMobil is carrying out with Clariant and Genomatica is consistent with all pioneer cellulosic fuels plants inasmuch as biomass enters the facility and is processed, in its entirety, through at least the hydrolysis step of biochemical conversion. This approach creates significant operating challenges as biomass can vary widely in composition and mechanical properties across and within a given biomass type. The proposed program involves a first step fractionation using solvolysis and reductive catalysis to generate a lignin oil containing well-defined monomers, dimers, and oligomers and a delignified cellulose/ hemicellulose pulp. The amount of lignin oil vs pulp and the type of monomers produced are expected to vary with biomass type due to differences in lignin composition and chemistry.

09 BIOMASS FUELS↗

Carbon-13 NMR spectra of lignin isolated from field grown transgenic poplar

Here we present a curated dataset of a series of 13C nuclear magnetic resonance (NMR) spectra of lignin isolated from transgenic monolignol 4-O-methyltransferase (MOMT4) engineered poplar. The transgenic poplar was collected from a 3-year field trial experiment. The poplar was Soxhlet-extracted with toluene/ethanol and the extractives-free poplar was then ball-milled in a Retsch PM100 planetary ball mill using a porcelain jar with ceramic balls at 600 rpm for 2 h. The ball-milled materials were then subjected to enzymatic hydrolysis for 48 h followed by centrifugation and washing with deionized water. The solid residue was extracted twice with 96:4 (v/v) 1,4-dioxane/water mixture at room temperature overnight. The extracts were combined, rotary evaporated, and freeze-dried to recover the lignin. The dry lignin samples were dissolved in deuterated dimethyl sulfoxide for NMR characterization. 13C experiments were performed in a Bruker Avance III HD 500 MHz NMR spectrometer operating at a frequency of 125.12 MHz for the 13C nucleus using a standard Bruker pulse sequence (zgpg) on a Prodigy platform cryoprobe. The NMR spectra were acquired under the following conditions: spectra width 229 ppm, 64k data points, 1s pulse delay, and 6k scans. All the data was processed using the Bruker’s TopSpin 3.6 software. Additional meta data is embedded in the raw spectra files.

13C NMR, lignin, poplar, field trial, MOMT4, CBI↗

Proton NMR spectra of lignin isolated from field grown transgenic poplar

Here we present a curated dataset of a series of 1H nuclear magnetic resonance (NMR) spectra of lignin isolated from transgenic monolignol 4-O-methyltransferase (MOMT4) engineered poplar. The transgenic poplar was collected from a 2-year-old rotation trees within a three-year field trial experiment. Two replicates were collected for each transgenic poplar for the 1H NMR analysis. The poplar samples were Soxhlet-extracted with toluene/ethanol to remove the extractives and the extractives-free poplar was then ball-milled in a Retsch PM100 planetary ball mill using a porcelain jar with ceramic balls at 600 rpm for 2 h. The ball-milled materials were subjected to enzymatic hydrolysis for 48 h followed by centrifugation and washing with deionized water. The solid residue was extracted twice with 96:4 (v/v) 1,4-dioxane/water mixture at room temperature overnight. The extracts were combined, rotary evaporated, and freeze-dried to recover lignin. The dry lignin samples were dissolved in deuterated dimethyl sulfoxide and transferred into a 5 mm NMR tube. 1H NMR experiments were performed in a Bruker Avance III HD 500 MHz NMR spectrometer operating at a frequency of 125.12 MHz for the 13C nucleus using a standard Bruker pulse sequence (zg) on a Prodigy platform cryoprobe. The NMR spectra were acquired with 16 ppm spectra width, 32k data points, 3s pulse delay, and 16 scans. All the data was processed using the Bruker’s TopSpin 3.6 software. Additional meta data is embedded in the raw spectra files.

1H NMR, lignin, poplar, field trial, MOMT4, CBI↗

Heteronuclear single quantum coherence (HSQC) NMR spectra of lignin isolated from switchgrass residues after fermentation with milling

Here we present a curated dataset of two-dimensional heteronuclear single quantum coherence (HSQC) nuclear magnetic resonance (NMR) spectra of lignin isolated from a herbaceous energy crop (Panicum virgatum L.). The lowland variant “Timber” switchgrass from Ernst seeds was used. The switchgrass was knife milled and passed through a 2 mm sieve prior to consolidated bioprocessing (CBP) process. Switchgrass was suspended in Milli-Q water and autoclaved for 90 min on liquid cycles. The residues after autoclaving were then subjected to CBP using coculture of Clostridium thermocellum (C. thermocellum DSM 1313 (LL1004)) and Thermoanaerobacterium thermosaccarolyticum ( T. thermosaccharolyticum HG-8 ATCC 31960 (LL1244)). Once-fermented and twice-fermented (FF) switchgrass were subjected to ball and disc milling in bioreactors at 55 °C and 60, 48 grams/L solids loadings for primary and secondary fermentation respectively. When fermentations were completed, the residual solids were rinsed with milli-Q water. Lignin was isolated from the pretreated residues after ball-milling in a porcelain jar with ceramic balls via Retsch PM 200 at 600 rpm for 2 h followed by enzymatic hydrolysis in acetate buffer (pH 4.8, 50 °C) for 48 h. The dry lignin samples were dissolved in deuterated dimethyl sulfoxide (d6) and characterized using 13C–1H HSQC in a Bruker Avance III HD 500-MHz NMR spectrometer. A standard Bruker pulse sequence (hsqcetgpsisp.2) was used on a Prodigy platform cryoprobe. The spectra were acquired with the following acquisition conditions: 230 ppm spectral width in F1 (13C) dimension with 256 data points and 12 ppm spectral width in F2 (1H) dimension with 2048 data points, a 90° pulse, with a C–H coupling constant of 145 Hz, a 1.0 s pulse delay, and 64 scans. Spectra were processed using the Bruker TopSpin 3.6 software.

Lignin, HSQC, Switchgrass, CBP , Ball mill, Disc m↗

HSQC spectra of lignin isolated from poplar stems

Here we present a curated dataset of two-dimensional heteronuclear single quantum coherence (HSQC) nuclear magnetic resonance (NMR) spectra of lignin isolated from stems of genetically engineered poplar through auxin signaling gene modification. The plants were grown in greenhouse with temperatures between 21 and 23 °C. Plants were harvested and the aboveground stems were cut off an approximately five-inch-long segment from the bottom end of the plant stem, debarked and air-dried for three weeks. The dried stem samples were Wiley milled (mesh size 20), Soxhlet-extracted with toluene/ethanol for 24 h to remove extractives. The extracted biomass was ball-milled in a Retsch PM100 planetary ball mill using a porcelain jar with ceramic balls at 600 rpm for 2 h (in 5 min on and 5 min off cycles to avoid excessive sample heating). The ball-milled materials were then subjected to enzymatic hydrolysis for 48 h followed by centrifugation and washing with deionized water. The solid residue was freeze-dried to recover the lignin. The dry stem lignin samples were dissolved in deuterated dimethyl sulfoxide (d6) and transferred into a 5 mm tube. 13C–1H HSQC experiments were performed in a Bruker Avance III HD 500 MHz NMR spectrometer operating at a frequency of 125.12 MHz for the 13C nucleus using a standard Bruker pulse sequence on a Prodigy platform cryoprobe. The NMR spectra were acquired under the following acquisition conditions: 230 ppm spectral width in F1 (13C) dimension with 256 data points and 12 ppm spectral width in F2 (1H) dimension with 2048 data points, a 90° pulse, a one bond C–H coupling constant of 145 Hz, a 1.0 s pulse delay, and 64 scans. Spectra were processed using the Bruker TopSpin 3.6 software. Additional meta data is embedded in the raw spectra figures.

HSQC, lignin, poplar, stems, CBI↗

HSQC spectra of lignin isolated from poplar roots

Here we present a curated dataset of two-dimensional heteronuclear single quantum coherence (HSQC) nuclear magnetic resonance (NMR) spectra of lignin isolated from roots of a greenhouse grown natural population of an energy crop poplar (Populus trichocarpa). Dormant cuttings of field-grown poplar were grown in 6-liter pots in a peat-based media containing bark, perlite, vermiculite, dolomite lime and a wetting agent in an environmentally controlled greenhouse. Temperatures were between 21 and 23 °C, with supplemental lighting to support a 16-h day length using 1000-watt high-pressure sodium lights in greenhouse. Once established, all plants were cut-back, allowed to regrow and harvested at the same time following an eight-month long growth period. Plants were harvested and the belowground roots were washed off soils, blotted, dried in an oven at 70 °C for 3 days, and Wiley milled (mesh size 20). The roots were Soxhlet-extracted with toluene/ethanol for 24 h to remove extractives. The extracted roots were ball-milled in a Retsch PM100 planetary ball mill using a porcelain jar with ceramic balls at 600 rpm for 2 h (in 5 min on and 5 min off cycles to avoid excessive sample heating). The ball-milled materials were then subjected to enzymatic hydrolysis for 48 h followed by centrifugation and washing with deionized water. The solid residue was extracted twice with 96% (v/v) 1,4-dioxane/water mixture at room temperature overnight. The extracts were combined, rotary evaporated, and freeze-dried to recover lignin. The dry lignin samples were dissolved in deuterated dimethyl sulfoxide (d6) and transferred into a 5 mm tube. 13C–1H HSQC experiments were performed in a Bruker Avance III HD 500 MHz NMR spectrometer operating at a frequency of 125.12 MHz for the 13C nucleus using a standard Bruker pulse sequence on a Prodigy platform cryoprobe. The NMR spectra were acquired under the following acquisition conditions: 220 ppm spectral width in F1 (13C) dimension with 256 data points and 12 ppm spectral width in F2 (1H) dimension with 1024 data points, a 90° pulse, a one bond C–H coupling constant of 145 Hz, a 1.0 s pulse delay, and 64 scans. Spectra were processed using the Bruker TopSpin software. Additional meta data is embedded in the raw spectra figures.

HSQC, lignin, poplar, roots, CBI↗

LOW COST PRODUCTION OF CARBON FIBERS FROM LIGNIN MATERIALS

The DOE Vehicle Technologies-funded work at ORNL is directed to the development of processes for the low cost production of carbon fibers. The objective of the project is to develop more energy-efficient, cost-effective processes for production of carbon fibers for use in composite materials for vehicles, which would substantially reduce vehicle weight, increase vehicle fuel economy, and result in lower CO2 emissions. Carbon fibers have the potential for substantial weight saving in vehicles because of their remarkable high strength, high modulus, and low density. However, carbon fibers are currently too expensive for large scale automotive use, which necessitates a large reduction in the cost of commercial grade fiber from about $20/lb to $5-7/lb. Lignin, a renewable resource material, has significant potential as a precursor material for low cost carbon fiber production. In this paper we report on progress to demonstrate the melt-spinning of precursor fibers from various lignin sources, the subsequent processing of the lignin precursor fibers into carbon fibers, and carbon fiber properties.

09 BIOMASS FUELS↗

Computational Study of Bond Dissociation Enthalpies for Lignin Model Compounds: $\beta$-5 Arylcoumaran

The biopolymer lignin is a potential source of valuable chemicals. The $\beta$-5 linkage comprises $\sim$10\% of the linkages in lignin. Density Functional Theory (DFT) was used to calculate the $\alpha$C-O and $\alpha$C-$\beta$C bond dissociation enthalpies (BDEs) for $\beta$-5 models with varied substituents, which are important for understanding initial lignin decomposition. The $\alpha$C-O ($\alpha$C-$\beta$C) BDEs were in the range of 40-44 (57-62) kcal/mol. The products resulting from either homolysis are bi-radicals with multi-determinant character in the singlet electronic state. Multiconfiguration self-consistent field (MCSCF) theory results were used to verify that unrestricted DFT and broken-symmetry DFT were sufficient to study these reactions.

09 BIOMASS FUELS↗

Challenges and Perspectives in Lignin‐Derived Polyurethane Foam Synthesis

Abstract Polyurethane foams (PUFs) represent a significant segment of the polyurethane (PU) and cellular plastics industries, owing to their versatile applications and desirable properties. However, the production of PUFs heavily relies on petroleum‐derived chemicals, including polyols and isocyanates, raising critical environmental concerns. Lignin, an abundant aromatic macromolecule, offers a promising alternative for replacing petroleum‐based polyols because of its intrinsic hydroxyl groups. While efforts have been made to produce and apply various lignin‐based polyurethane foams (LPUFs), their commercialization remains limited by challenges such as low product consistency, poor technical performances, and high production costs. This study critically evaluates recent advances in the development of LPUFs, including innovative synthesis methods, functional applications, and emerging research trends. Moreover, potential strategies are discussed, such as lignin fractionation, modification, and co‐solvent assistance, for addressing the challenges. By resolving them, LPUFs could play a pivotal role in transitioning the PU industry to help achieve a circular bioeconomy.

Zhang, Mairui [Carl and Melinda Helwig Department ↗

On the characterization and spinning of solvent extracted lignin towards the manufacture of low-cost carbon fiber

ABSTRACT: A Kraft hardwood lignin (HWL) and an organic-purified hardwood lignin (HWL-OP) were evaluated as potential precursors for the production of lowcost carbon fibers. It was found that the unpurified HWL exhibited poor spinnability while the HWL-OP exhibited excellent spinnability characteristics. Fibers of various diameters were obtained from the HWL-OP. Thermostabilization studies showed that oxidative stabilization can only be used to convert HWL-OP-based fibers into carbon fibers if extremely low heating rates are applied. Carbonized lignin-based fibers had tensile strength of 0.51 GPa and tensile modulus of 28.6 GPa. VC

Baker, Darren A↗

Morphological changes in the cellulose and lignin components of biomass occur at different stages of steam pretreatment

Morphological changes to the different components of lignocellulosic biomass were observed as they occurred during steam pretreatment by placing a pressure reaction cell in a neutron beam and collecting time-resolved neutron scattering data. Changes to cellulose morphology occurred mainly in the heating phase, whereas changes in lignin morphology occurred mainly in the holding and cooling phases. During the heating stage, water is irreversibly expelled from cellulose microfibrils as the elementary fibrils coalesce. During the holding phase lignin aggregates begin to appear and they increase in size most noticeably during the cooling phase. This experiment demonstrates the unique information that in situ small angle neutron scattering studies of pretreatment can provide. This approach is potentially useful in optimizing the heating, holding and cooling stages of pretreatments to allow the exact size and nature of lignin aggregates to be controlled in order to enhance enzyme accessibility to cellulose and therefore the efficiency of biomass conversion.

09 BIOMASS FUELS↗

Linking phenylpropanoid metabolism, lignin deposition, and plant growth inhibition

Lignin, a polymer found in the plant secondary cell wall, is a major contributor to biomass’ recalcitrance toward saccharification. Because of this negative impact toward the value of lignocellulosic crops, there is a special interest in modifying the content and composition of this important plant biopolymer. For many years this endeavor has been hindered by the plant growth inhibition that is often associated with manipulations to phenylpropanoid metabolism. Although the actual mechanism by which dwarfism arises remains unknown, recent advances in tissue-specific lignin complementation and better understanding of phenylpropanoid transcriptional regulation has made it possible to disentangle lignin modification from perturbations in plant development.

09 BIOMASS FUELS↗

Computational study of bond dissociation enthalpies for lignin model compounds: β-5 Arylcoumaran

The biopolymer lignin is a potential source of valuable chemicals. The β-5 linkage comprises ~10% of the linkages in lignin. Density Functional Theory (DFT) was used to calculate the C α –O and C α "-" C β bond dissociation enthalpies (BDEs) for β-5 models with varied substituents, which are important for understanding initial lignin decomposition. The Cα-O (C α "-" C β ) BDEs were in the range of 40-44 (57-62) kcal/mol. The products resulting from either homolysis are bi-radicals with multi-determinant character in the singlet electronic state. Multiconfiguration self-consistent field (MCSCF) theory results were used to verify that unrestricted DFT and broken-symmetry DFT were sufficient to study these reactions.

Chemistry↗

(-)ESI/CAD MS n Procedure for Sequencing Lignin Oligomers Based on a Study of Synthetic Model Compounds with β-O-4 and 5-5 Linkages

Here, seven synthesized G-lignin oligomer model compounds (ranging in size from dimers to an octamer) with 5-5 and/or β-O-4 linkages, and three synthesized S-lignin model compounds (a dimer, trimer, and tetramer) with β-O-4 linkages, were evaporated and deprotonated using negative-ion mode ESI in a linear quadrupole ion trap/Fourier transform ion cyclotron resonance mass spectrometer. The collision-activated dissociation (CAD) fragmentation patterns (obtained in MS 2 and MS 3 experiments, respectively) for the negative ions were studied to develop a procedure for sequencing unknown lignin oligomers. On the basis of the observed fragmentation patterns, the measured elemental compositions of the most abundant fragment ions, and quantum chemical calculations, the most important reaction pathways and likely mechanisms were delineated. Many of these reactions occur via charge-remote fragmentation mechanisms. Deprotonated compounds with only β-O-4 linkages, or both 5-5 and β-O-4 linkages, showed major 1,2-eliminations of neutral compounds containing one, two, or three aromatic rings. The most likely mechanisms for these reactions are charge-remote Maccoll and retro-ene eliminations resulting in the cleavage of a β-O-4 linkage. Finally, facile losses of H 2 O and CH 2 O were also observed for all deprotonated model compounds, which involve a previously published charge-driven mechanism. Characteristic “ion groups” and “key ions” were identified that, when combined with their CAD products (MS 3 experiments), can be used to sequence unknown oligomers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗