Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LASER RADIATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Collision-induced amplification of radiation in inversionless two-level systems

Amplification of probe radiation by an inversionless two-level system in the 'red' wing of its spectral line is studied theoretically during the resonance absorption of intense cw laser radiation. The effect is caused by the inequality of the spectral densities of the Einstein coefficients for absorption and stimulated emission outside the absorption line under conditions when homogeneous broadening, due to the interaction of particles with the buffer gas, significantly exceeds the natural broadening (at high pressures of the buffer gas). It is found that the larger the inversionless gain, the higher the buffer gas pressure and the pump radiation intensity. It is established that at high enough pump intensity, the probe field is amplified along the entire region of the 'red' wing of the line (at any negative detunings of the probe field frequency). (nonlinear optical phenomena)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Transmission and reflection spectra of a photonic crystal with a Raman defects

Features of Raman gain of probe radiation in three-level atoms placed in a defect of a one-dimensional photonic crystal in the presence of laser radiation (pump) at an adjacent high-frequency transition have been theoretically investigated. It has been shown that there is a pump intensity range where narrow peaks (resonances) simultaneously appear in the transmission and reflection spectra of the probe field. Beyond this region, the peak in the transmission spectrum is transformed to a narrow dip. The spectral position of these peaks is determined by the Raman resonance and the transmittance and reflectance can be larger than unity at pump intensities from several microwatts per square centimeter to several tens of milliwatts per square centimeter. The nature of narrow peaks is due to a sharp dispersion of a nonlinear refractive index near the Raman resonance; this dispersion is responsible for a strong decrease in the group velocity of probe radiation. The proposed scheme makes it possible to obtain controlled ultranarrow resonances in the transmission and reflection spectra of the photonic crystal.

74 ATOMIC AND MOLECULAR PHYSICS↗

Transversely diode-pumped alkali metal vapour laser

We have studied theoretically the operation of a transversely diode-pumped alkali metal vapour laser. For the case of high-intensity laser radiation, we have obtained an analytical solution to a complex system of differential equations describing the laser. This solution allows one to exhaustively determine all the energy characteristics of the laser and to find optimal parameters of the working medium and pump radiation (temperature, buffer gas pressure, and intensity and width of the pump spectrum). (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Formation of extended conducting channels in atmosphere

Some mechanisms of the formation of an extended ({approx}1 km) conducting channel in atmosphere using the laser engine technology (Impul'sar program) are considered. The electric conductivity of a channel formed by electric explosion of a 90-{mu}m copper wire up to {approx}1.6 m long (in electric breakdown) at a voltage not higher than 10 kV is studied. The requirements to the products of laser engine exhaust to atmosphere for producing a conducting channel, containing dispersion and condensation aerosols of hot particles of copper oxides (CuO, Cu{sub 2}O) and copper with an oxidised surface (from 50 nm to 300 {mu}m in diameter), are formulated. Possible mechanisms of electric breakdown at the field strength E {>=} 52 V cm{sup -1} in the discharge gap are discussed. The electric conductivity of the channel formed by the laser plasma upon focusing the solid-state laser radiation on targets made of different materials has also been studied.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Special Features of the Optical Absorption and Photoconductivity of Indium Monoselenide Upon Laser Excitation

The successive ionic layer adsorption and reaction (SILAR) method is used to prepare InSe thin films and InSe nanoparticles. Shapes and sizes of the obtained nanoparticles are investigated using a scanning electron microscope and an atomic force microscope. The main parameters of the examined structures, nanoparticle sizes (4–20 nm), and band gap (Е{sub g} = 1.60 eV) for nanoparticles with the least sizes are determined. Superfast (1.5·10{sup -8} s) photocurrent relaxation and stimulated emission with line half-width of 8 Å have been observed upon exposure to laser radiation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Hydrodynamic effects in laser cutting of biological tissue phantoms

We study the thermal and transport processes that occur in the course of incision formation at the surface of a biological tissue phantom under the action of near-IR, moderate-power, continuous-wave laser radiation (λ = 1.94 μm) delivered by means of an optical fibre with an absorbing coating on its exit face. It is shown that in addition to the thermal effect, the laser-induced hydrodynamic effects caused by the explosive boiling of the interstitial water make a large contribution to the phantom destruction mechanism. These effects lead to the tissue rupture accompanied by the ejection of part of the fragmented substance from the site of laser impact and the formation of highly porous structure near the incision surface. We have found that the depth, the width and the relief of the laser incision wall in the case of using the optical fibre moving with a constant velocity, depend on the fibre tilt angle with respect to the phantom surface, as well as the direction of the fibre motion. (laser medicine)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Two-micron lasing in NaLa{sub 1/2}Gd{sub 1/2}(WO{sub 4}){sub 2} crystals doped with Tm{sup 3+} ions

Lasing on the {sup 3}F{sub 4{yields}}{sup 3}H{sub 6} transition of Tm{sup 3+} ions in Tm{sup 3+}:NaLa{sub 1/2}Gd{sub 1/2}(WO{sub 4}){sub 2} crystals pumped by a diode laser is obtained for the first time. The {pi}- and {sigma}-polarised laser radiation at wavelengths of 1908 and 1918 nm was generated with a slope efficiency of 28% and 25%, respectively. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Simulations of neutron emission in the irradiation of deuterated polyethylene by ultrahigh-intensity laser pulses

The neutron yield from deuterated polyethylene targets irradiated by ultrahigh-intensity laser pulses was calculated in a wide range of pulse energies. The resultant data are in better agreement with available experimental data than the data of the corresponding simulations performed by other authors earlier. The neutron pulse duration was shown to exceed the laser pulse duration by more than an order of magnitude. We also showed that the neutron yield accompanying the irradiation of a laminated target of deuterated polyethylene is, thanks to redistribution of deuteron fluxes in its volume, substantially higher in comparison with the irradiation of a continuous target (effects of laser radiation on matter)

36 MATERIALS SCIENCE↗

Experimental and Theoretical Research on the Angular Distribution of Neutrons Produced in {sup 7}Li(p, n){sup 7}Be Reactions during the Interaction of Intense Laser Pulses with Solid Targets

Experiments to measure the angular distribution of neutrons produced in {sup 7}Li(p, n){sup 7}Be nuclear reactions have been carried out at the “Neodymium” picosecond laser facility. A beam of protons was generated on the rear side of a thin aluminum target irradiated by laser radiation with a maximum flux density of 3 × 10{sup 18} W cm{sup –2} (λ = 1.055 μm). Traces of organic compounds on the target surface were the source of protons. Protons were incident on a massive LiF target in which the above nuclear reactions occurred. Our measurements have shown that the neutron flux is anisotropic with a degree of anisotropy equal to 2. We have analyzed the angular distribution of the neutron flux using numerical calculations. We show that at certain proton beam parameters characterizing the energy and angular spectra of protons, it is possible to reproduce the experimentally measured angular distribution of the neutron flux. There are proton beam parameters at which the degree of anisotropy of the neutron flux can be increased several-fold compared to the experimentally measured one.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

New acceptor centers of the background impurities in p-CdZnTe

Low-temperature photoluminescence data are used to study the redistribution of the background impurities and host components of p-CdZnTe single crystals with a resistivity of 1-50 {Omega} cm upon their interaction with infrared laser radiation. The effect of widening of the band gap and the formation of new acceptor centers in response to laser-stimulated changes in the system of intrinsic defects are established. The activation energy of the new acceptor centers is determined.

36 MATERIALS SCIENCE↗

Time-of-Flight Characteristics of a Laser Torch during Ablation of a MnSi Target in Argon Atmosphere

The Langmuir-probe technique has been used to study the time-of-flight characteristics of a laser torch during MnSi-target ablation in vacuum and argon atmosphere by pulsed 532-nm laser radiation at 15-ns pulse duration. It is established that the amplitude of the signal of fast particles in the laser torch nonmonotonically depends on the buffer-gas pressure. Mechanisms determining this dependence of laser-torch characteristics on the pressure are considered. The influence of buffer-gas pressure on the ion-velocity distribution function is determined.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Control over the performance characteristics of a passively mode-locked erbium-doped fibre ring laser

We report an all-fibre ultrashort pulse erbium-doped ring laser passively mode-locked by single-wall carbon nanotubes dispersed in carboxymethylcellulose-based polymer films. Owing to intracavity dispersion management and controlled absorption in the polymer films, the laser is capable of generating both femto- and picosecond pulses of various shapes in the spectral range 1.53 – 1.56 μm. We have demonstrated and investigated the generation of almost transform- limited, inversely modified solitons at a high normal cavity dispersion. (control of laser radiation parameters)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Novel IR Phosphor Based on Sr{sub 3}La{sub 2}(Ge{sub 3}O{sub 9}){sub 2} : Nd{sup 3+},Ho{sup 3+} Germanate

Cyclogermanate Sr{sub 3}La{sub 2}(Ge{sub 3}O{sub 9}){sub 2}, isostructural to silicate Sr{sub 3}Er{sub 2}(Si{sub 3}O{sub 9}){sub 2}, activated by neodymium and holmium is obtained for the first time by the precursor method. Ion Nd{sup 3+} in the structure of Sr{sub 3}La{sub 2}(Ge{sub 3}O{sub 9}){sub 2} is a sensitizer of the infrared luminescence of Ho{sup 3+}. Excitation by radiation with a wavelength of 808 nm leads to a series of emission lines in the luminescence spectra of Sr{sub 3}La{sub 2-x}Nd{sub x}(Ge{sub 3}O{sub 9}){sub 2} : Ho{sup 3+} in the short-wave and middle-IR ranges (1.0–3.4 μm). The highest intensity of lines at 2.1 and 2.7 μm, associated with the {sup 5}I{sub 7} → {sup 5}I{sub 8} and {sup 5}I{sub 6} → {sup 5}I{sub 7} transitions in the Ho{sup 3+} ion, is found for compositions containing traces of holmium. Based on the analysis of the concentration dependences of the luminescence intensity, an optimal composition of the phosphor is determined, which ensures the maximum efficiency of conversion of laser radiation energy. The data obtained are interpreted in the assumption of cross-relaxation energy transfer from Nd{sup 3+} to Ho{sup 3+}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

On the potential of mid-IR lasers for generating high harmonics with subnanometer wavelengths in gases

The influence of the magnetic field of a laser pulse and the depletion of bound levels of working-medium atoms on the generation of high harmonics of mid-IR laser radiation in gases is investigated using numerical quantum-mechanical calculations. The maximum attainable spectral widths of high harmonics are estimated for model atoms with different ionisation potentials taking into account the aforementioned limiting effects. It is shown (within a two-dimensional model) that high harmonics with wavelengths to several angstroms can be generated by irradiating helium atoms with high-power femtosecond pulses of a laser [5] with a centre wavelength of 3.9 {mu}m. The possibility of observing experimentally relativistic effects using modern desktop mid-IR laser sources is demonstrated. (extreme light fields and their applications)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

On the possibility of the generation of high harmonics with photon energies greater than 10 keV upon interaction of intense mid-IR radiation with neutral gases

Based on the analytical quantum-mechanical description in the framework of the modified strong-field approximation, we have investigated high harmonic generation of mid-IR laser radiation in neutral gases taking into account the depletion of bound atomic levels of the working medium and the electron magnetic drift in a high-intensity laser field. The possibility is shown to generate high-order harmonics with photon energies greater than 10 keV under irradiation of helium atoms by intense femtosecond laser pulses with a centre wavelength of 8 – 10.6 μm. (interaction of radiation with matter)

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Cooling and thermal stabilisation of Faraday rotators in the temperature range 300 - 200 K using Peltier elements

A new method for cooling and thermal stabilisation of Faraday rotators using Peltier elements is proposed and experimentally demonstrated. The scheme of thermal stabilisation of the magnetooptical elements ensures reliable operation of the device at the absorbed power {approx}2 W, which corresponds to the transmitted laser radiation power 1.5 kW. The results of the work make it possible to predict high efficiency of this method at the laser power of tens of kilowatts.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-quality laser cutting of stainless steel in inert gas atmosphere by ytterbium fibre and CO{sub 2} lasers

Processes of cutting stainless steel by ytterbium fibre and CO{sub 2} lasers have been experimentally compared. The cut surface roughnesses for 3- and 5-mm-thick stainless steel sheets are determined. The absorption coefficient of laser radiation during cutting is measured. It is established that the power absorbed by metal during cutting by the CO{sub 2} laser exceeds that for the ytterbium laser (provided that the cutting speed remains the same). The fact that the maximum cutting speed of the CO{sub 2} laser is lower than that of the ytterbium fibre laser is explained. (laser technologies)

36 MATERIALS SCIENCE↗

Control over pulsed operation modes of an erbium-doped fibre laser passively mode-locked via nonlinear polarisation rotation

We have experimentally demonstrated the possibility of controlling pulse generation modes of an erbium-doped fibre ring laser operating in the anomalous dispersion regime and passively mode-locked via nonlinear polarisation rotation. It has been shown that individual adjustment of the pump power and intracavity polarisation controllers leads to changes in pulse generation mode, without changing the cavity. We have evaluated the key spectral, temporal and energetic characteristics of the observed pulse generation modes. (control of laser radiation parameters. active media)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗