Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LAPSE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Towards the Development of Real-Time Normalized Burn Ratio (NBR) and Delta NBR Imagery from GOES-16/17 and S-NPP

Burned landscapes present difficult hydrologic forecasting challenges for National Weather Service Offices. Burned soils and landscapes can be conducive to the development of flash flooding and landslides from heavy precipitation events. The severity of the burn scar can be directly related to the risk for debris flows and flash flooding. Burned Area Reflectance Classification (BARC) map is generated to indicate the degree of burn severity, which is generated initially by high-resolution satellite imagery from sources such as Landsat, and later by labor-intensive efforts conducted at the burn scar by Burned Area Emergency Response (BAER) teams. The challenge for operational meteorologists is that these sources of information are not readily available in near real-time. Landsat imagery, for example, may only be available about once every eight days, and cloudy conditions can obstruct the observation of the burn scar during a single pass. BAER teams cannot conduct assessments until the wildfire has been at least 40 percent contained (up to 80 percent in some regions), and the process itself can take further days to weeks to complete depending on a number of factors. To help remedy this lapse in knowledge, NASA SPoRT has developed the generation of NBR imagery in the Advanced Weather Interactive Processing System (AWIPS) using data from the operational GOES 16 and 17 satellites and S-NPP. This presentation will discuss the development of the GOES- and SNPP-derived NBR and dNBR imagery and their initial evaluation by real-time decision makers.

Berndt, Emily↗

Auralization of a Supersonic Business Jet Using Advanced Takeoff Procedures

Recent NASA studies of a supersonic business jet airplane indicated that advanced takeoff procedures could be used to reduce noise at the lateral sideline location to a level at which Chapter 4 noise certification requirements could be met. The studies were conducted with the NASA Aircraft Noise Prediction Program, using an analytical model of the airframe and its engines. The advanced procedure consists of a higher-speed climbout and a programmed thrust lapse in which the engine thrust is automatically and gradually reduced immediately after the runway obstacle is cleared. In this paper, the authors utilize the results of the most recent study as the basis of an auralization of the predicted noise. Modifications to the NASA Auralization Framework necessary for that process are described. The auralizations are used to demonstrate differences between standard and advanced takeoff pro ond those that may be observed through comparison of integrated noise metrics.

Rizzi, Stephen A.↗

Evaluation of Performance, Fatigue and Workload during Real-time, Reactive Telerobotic Mission Control Operations

Telerobotic operations involve a user operating a robot from a different location from where the activity is taking place. It can be difficult for humans to maintain performance when faced with physiological stressors, such as fatigue or illness. Operations require vigilance for extended periods, raising safety concerns surrounding operator’s fatigue and workload. Every hour of wakefulness increases the drive to sleep, causing decreased reaction time (RT), increased lapses in attention (RT > 500 ms), and decreased memory capability. The NASA Task Load Index (NASA-TLX) was created to evaluate the multiple attributes surrounding workload (e.g., mental and physical demands). The upcoming Volatiles Investigating Polar Exploration Rover (VIPER) mission involves remotely controlling a lunar vehicle from an Earth-based mission control station. The goal of VIPER is to excavate the moon for volatiles (water) deep in the surface near the South Pole for a 100-day, continuous operation.

Fatigue↗

TPSAS-NF1676L-12387-DND

Fast-time wake prediction models are semi-empirical, and are designed to predict aircraft wake vortex information behind a generating aircraft. They are developed using theoretical concepts and often calibrated with data obtained from field measurements, laboratory studies, or numerical simulations. They rely upon inputs representing the generating aircraft (such as weight, airspeed, wingspan, lateral position, and altitude) and atmospheric environment (such as ambient winds, turbulence, and temperature lapse rate). Other input may include the type of aircraft (e.g., B-747- 400). Output from these models may include time histories of the wake vortex strength, and position, as well as a prediction of the uncertainties in strength and position. Fast-time models should provide solutions in a fraction of a second, and hence is an enabling technology able to perform in a real-time operational system, such as dynamic spacing systems envisioned by the Aircraft Vortex Spacing System or other Super Density Operations concepts. Other applications of fast-time models include 1) guidance for wake separation standards for new aircraft, 2) optimization of separation standards for existing aircraft, 3) guidance for setting vertical separation standards during cruise, 4) accident reconstructions, and 5) testing of new concepts for safe increases in airport capacity for both single and multiple runway configurations. Fast-time models are based on a number of assumptions which limit their accuracy and range of application. For example, they do not predict the meandering vortex paths that can result from the wake interaction with atmospheric turbulence. However, these models should account for the mean vortex position and may predict the level of uncertainty. This presentation describes a study in which comparative evaluations of fast-time wake transport and decay models were conducted using data sets from previous field programs taken at MEM (1995), DFW (1997, 1999, 2000), and Denver (2005, 2006) airports. These data sets contain, meteorological data, lidar measurements of wake vortices, and the aircraft parameters associated with these vortices.

Fred H Proctor↗

Process Drivers, Inter-model Spread, and a Path Forward: What Do We Know About Arctic Amplification?

Over the recent decades, rapid changes have been observed in the Arctic resulting from enhanced surface warming in the Arctic relative to the rest of the globe, a phenomenon called Arctic Amplification. While surface-based amplification of Arctic warming in response to increased CO2 has been established. The driving mechanisms, relevant processes, and the relative roles of local and remote mechanisms to Arctic Amplification remain unclear. Research over the last decade has made it clear that coupling between the atmosphere, sea ice, and ocean play a key role in Arctic Amplification. This presentation summarizes recent research on the fundamental role that atmosphere-sea ice-ocean interactions and energy exchanges play in driving Arctic Amplification, how these interactions manifest as radiative climate feedbacks, and how these processes influence the differences in the projected Arctic climate change across CMIP5 and 6. We hypothesize that models that simulate larger warming do so by generating a larger local atmospheric circulation response that more effectively redistributes energy drawn from the ocean in sea ice retreat regions Arctic-wide and contributing to a larger increase in downwelling long wave radiation. This process is also fundamentally tied to the Arctic lapse rate feedback.

Patrick Charles Taylor↗

Building a Bilingual Google Earth Engine Dashboard to Increase Accessibility to Long-term Time Series Remote Sensing Data for Monitoring Saline System Changes in Chile’s Atacama Desert

Saline systems, consisting of salt flats, ponds, and marshes, provide vital water resources to wildlife and communities in northern Chile’s Atacama Desert, one of the driest regions in the world. Mining is extensive in the Atacama, which contains 30% of the world’s lithium reserves and is abundant in potassium and boron. The groundwater that feeds into salt marshes and ponds is extracted in large volumes for mining operations, limiting the availability of water for ecosystems. However, identifying long-term and large-scale environmental impacts from local lithium mining on the saline systems is limited by region inaccessibility and terrain variability. Open access satellite imagery and cloud computing technology has made studying Atacama saline systems feasible and allowed for collaboration across different agencies and countries. The NASA DEVELOP Program partnered with Chile’s la Universidad de La Serena and Servicio Nacional de Geología y Minería (SERNAGEOMIN) to create the Saline Analysis Tool (SalT) in Google Earth Engine (GEE). SalT is used to analyze the extent and distribution of remote saline systems in the Atacama from 1986 to the present day. The tool filters Landsat 5 Thematic Mapper (TM) and Landsat 8 Operational Land Imager (OLI) data from GEE’s data catalog and creates a single composite image per year for analysis. Additional output analyses include land cover classification, Normalized Difference Vegetation Index (NDVI) and Normalized Difference Water Index (NDWI) raster images that can be displayed on the map interface or exported. The tool can also generate time-lapse videos and charts displaying NDVI, NDWI, and land cover over time. A key feature of the tool is the use of a bilingual graphical user interface to make analysis accessible and customizable to different users’ needs—SalT provides options to select an analysis area, analysis time period, and outputs to display or export. The tool also incorporates new Earth observations as they are added to GEE’s catalog. The ability to easily visualize and analyze long-term remote sensing imagery will enable SERNAGEOMIN and la Universidad de la Serena to continually monitor changes in these saline systems and inform future land management policy.

NASA DEVELOP↗

Electric Six Degree of Freedom Installation Timelapse (Six Degree of Freedom Dynamic Test System)

The Six-degree-of-freedom Dynamic Test System (SDTS) is a short-range real-time motion based testing platform. Its primary use at NASA/JSC has been for development and qualification testing of docking systems, robotic assisted berthing mechanisms, and dynamic attachment systems. The SDTS is a closed-loop force feedback system that can simulate on-orbit contact dynamics between two vehicles utilizing the actual mechanical interfaces for testing. The facility is controlled by interconnected computers running real-time simulation software that takes measured contact forces, integrates the equations of motion in real time, and provide those states back into the motion table. This infrastructure can also be used for non-mating applications such as relative position sensor testing/evaluations. The SDTS facility provides a superstructure for mounting test articles, multiple test sensors, an intercom network for voice communications, and a synchronized timing system for data acquisition that includes HD video. This time-lapse video shows the buildup and testing of a modern electric actuation system created by Mikrolar, Inc. at the Johnson Space Center. This motion base will replace the current hydraulic actuator system, which is been in use since the 1970s, for all-future NASA testing. Once the system goes through customization to provide JSC’s unique closed-loop environment, the facility will help certify docking system and attach mechanisms on the ground before we send the first woman and the next man to the lunar surface

hexapod↗

U.S. Spacesuit Knowledge Capture – Chronicling Spacesuit Design for the Future

With less than 4 years until the United States is scheduled to land the first woman and next man on the Moon, NASA is leveraging 60 years of experience to build a spacesuit to assist in the success of this and future human space exploration missions. This experience comes from the achievements of retired and employed spacesuit experts, innovations that were conceived from existing ideas and inventions, and a plethora of archived knowledge. The U.S. Spacesuit Knowledge Capture (SKC) Program’s primary function is to capture, archive, and share current and legacy spacesuit-related knowledge with scientists, engineers, and technicians. To capture valuable spacesuit-related knowledge, the program uses various methods that have included hosting and recording classroom and online courses, workshops, and vignettes, and preserving thousands of legacy spacesuit-related files. In 2019, the SKC Program added to its role when it began coordinating the electronic recording of the new spacesuits’ buildup. This new, next-generation spacesuit is named the Exploration Extravehicular Mobility Unit (xEMU) and is a compilation of many components. As each component is tested and assembled into the suit, the SKC Program is chronicling this buildup using high-speed video production and photography that includes time-lapsed images. To complement the recording of the components, the SKC Program plans to record and photograph the design verification testing. In 2020, the SKC Program was given the initiative to research and identify the custodianship of historical spacesuit equipment that resides within the Crew and Thermal Systems Division. These archives will be added to the SKC Program’s expansive archived collection of spacesuit-related knowledge that represents over 5 decades of spacesuit legacy from the Apollo era to the pursuit of Mars and beyond. This paper describes the electronic documentation of the xEMU’s buildup and identifies the SKC Program’s 2020 accomplishments.

Cinda Chullen↗

Process drivers, inter-model spread, and a path forward: What do we know about Arctic Amplification?

Over the recent decades, rapid changes have been observed in the Arctic resulting from enhanced surface warming in the Arctic relative to the rest of the globe, a phenomenon called Arctic Amplification. While surface-based amplification of Arctic warming in response to increased CO2 has been established. The driving mechanisms, relevant processes, and the relative roles of local and remote mechanisms to Arctic Amplification remain unclear. Research over the last decade has made it clear that coupling between the atmosphere, sea ice, and ocean play a key role in Arctic Amplification. This presentation summarizes recent research on the fundamental role that atmosphere-sea ice-ocean interactions and energy exchanges play in driving Arctic Amplification, how these interactions manifest as radiative climate feedbacks, and how these processes influence the differences in the projected Arctic climate change across CMIP5 and 6. We hypothesize that models that simulate larger warming do so by generating a larger local atmospheric circulation response that more effectively redistributes energy drawn from the ocean in sea ice retreat regions Arctic-wide and contributing to a larger increase in downwelling long wave radiation. This process is also fundamentally tied to the Arctic lapse rate feedback.

Patrick C. Taylor↗

Elevation Dependent Warming in the Eastern Siberian Arctic

There is evidence for elevation-dependent warming (EDW) in many mountainous regions, including the Alps, Rockies, and Tibetan Plateau, all of which are in mid-latitudes. Most studies finding evidence of EDW indicate that both recent decadal and future projected warming rates are greater at higher elevations. In this study, we examine the roles of Arctic amplification and elevation on future warming rates in winter and summer in eastern Siberia (50-70°N; 80-180°E). This region includes four major river basins that flow into the Arctic Ocean (the Yenisei, Lena, Indigirka, and Kolyma) and intersects with mountain ranges in northern Mongolia and eastern Siberia. We analyse projected 21st century temperature projections using a six-member ensemble of the National Center for Atmospheric Research (NCAR) Community Climate System Model (CCSM4) with a radiative forcing of 8.5 W m-2. Projected warming rates in winter for the 21st century are dominated by Arctic amplification, which leads to significantly larger warming rates at higher latitudes, with latitudinal gradients of about 0.16°C per degree latitude. In summer, the latitudinal gradient is near zero (0.02°C per degree of latitude). Within specific latitude bands, we also find EDW. However, unlike most mid-latitude locations where warming rates are greater at higher elevations, we find that future warming rates are smaller at higher elevations for this high-latitude region, particularly during winter, with statistically significant rates varying between -0.70 and -2.46 °C/km for different 5° latitude bands. The decrease in warming rates with elevation in winter at the highest latitudes is primarily attributed to strong inversions and changes in the lapse rate as free-air temperatures warm at slower rates than surface temperatures. In summer, the elevation dependence is much weaker than in winter but still statistically significant and negative in all but the most northern latitude band with values ranging between -0.10 and -0.56 °C/km.

elevation-dependent warming (EDW)↗

Evaluating Observational Constraints on Intermodel Spread in Cloud, Temperature, and Humidity Feedbacks

Uncertainty in climate feedbacks is the primary source of the spread in projected surface temperature responses to anthropogenic forcing. Cloud feedback persistently appears as the main source of disagreement in future projections while the combined lapse-rate plus water vapor (LR+WV) feedback is a smaller (30%), but non-trivial source of uncertainty in climate sensitivity. Here we attempt to observationally constrain the feedbacks in an effort to reduce the irintermodel uncertainties. The observed interannual variation provides a useful constraint on the long-term cloud feedback, as evidenced by the consistency of global-mean values and regional contributions to the intermodal spread on both interannual and long-term timescales. However, interannual variability does not serve to constrain the long-term LR+WV feedback spread, which we find is dominated by the varying tropical relative humidity (RH) response to interhemispheric warming differences under clear-sky conditions and the RH-fixed LR feedback under all-sky conditions

radiative feedbacks↗

U.S. Spacesuit Knowledge Capture – Chronicling Spacesuit Design for the Future

With less than 4 years until the United States is scheduled to land the first woman and next man on the Moon, NASA is leveraging 60 years of experience to build a spacesuit to assist in the success of this and future human space exploration missions. This experience comes from the achievements of retired and employed spacesuit experts, innovations that were conceived from existing ideas and inventions, and a plethora of archived knowledge. The U.S. Spacesuit Knowledge Capture (SKC) Program’s primary function is to capture, archive, and share current and legacy spacesuit-related knowledge with scientists, engineers, and technicians. To capture valuable spacesuit-related knowledge, the program uses various methods that have included hosting and recording classroom and online courses, workshops, and vignettes, and preserving thousands of legacy spacesuit-related files. In 2019, the SKC Program added to its role when it began coordinating the electronic recording of the new spacesuits’ buildup. This new, next-generation spacesuit is named the Exploration Extravehicular Mobility Unit (xEMU) and is a compilation of many components. As each component is tested and assembled into the suit, the SKC Program is chronicling this buildup using high-speed video production and photography that includes time-lapsed images. To complement the recording of the components, the SKC Program plans to record and photograph the design verification testing. In 2020, the SKC Program was given the initiative to research and identify the custodianship of historical spacesuit equipment that resides within the Crew and Thermal Systems Division. These archives will be added to the SKC Program’s expansive archived collection of spacesuit-related knowledge that represents over 5 decades of spacesuit legacy from the Apollo era to the pursuit of Mars and beyond. This paper describes the electronic documentation of the xEMU’s buildup and identifies the SKC Program’s 2020 accomplishments.

Cinda Chullen↗

Sleep, Sleepiness, and Performance Across Three In-Flight Bunk Rest Opportunities

Introduction: Airline pilots are required to take a rest break in a bunk during long-haul flights in an effort to reduce sleepiness during critical phases of flight. It is unclear, however, whether each rest break affords equal opportunity for sleep. We aimed to characterize sleep, sleepiness, and performance outcomes across three in-flight rest breaks during long-haul flights. Methods: Thirty-seven pilots wore actiwatches and completed sleep diaries for approximately two weeks while flying a variety of long-haul routes (n=126 flights). Self-reported in-flight bunk rest (BR) periods were used to set rest intervals and sleep was estimated within these intervals using actigraphy software (wake threshold set to medium). Pilots provided Karolinska Sleepiness Scale ratings (KSS) and performed a 5-minute psychomotor vigilance task (PVT) before landing. A linear mixed-effects model with participant included as a random effect and allowed to vary by intercept was used to assess differences between BR opportunities. Results : The majority (97%, n=122) of bunk rest periods contained sleep (as estimated by actigraphy). The mean (+/- standard deviation) sleep duration for the first, middle, and third BR opportunity was 152.8 (69.7), 149.2 (44.1), 125.2 (44.9) minutes, respectively. There was a significant effect of BR opportunity for sleep duration (F2,54 = 3.747, p=.03) and KSS (F2,44 = 7.869, p=.001). Bonferroni adjusted planned pairwise contrasts revealed that pilots using the third BR obtained significantly less sleep than in the first BR (p=.029). KSS ratings prior to landing were higher for the third BR compared to both the first (p=.001) and middle BR (p=.017). There were no significant differences for PVT speed or lapses (all p>05). Conclusion: These results suggest that the last rest break is associated with shorter sleep, lower alertness, and no differences in performance relative to the other rest breaks. Further analysis is required to determine whether the higher KSS ratings following the third rest break are associated with sleep inertia, or whether other factors may be involved.

sleepiness↗

NASA High Efficiency, High OPR Capable Small Core Compressor

As future aircraft become lighter and more aerodynamically efficient, thrust requirements will decrease, reducing the core size of the engine. Furthermore, in the pursuit of improved fuel burn, engine overall pressure ratio and bypass ratio will increase, further driving down engine core size (core size being defined as high-pressure compressor [HPC] exit-corrected flow). These drivers together mean that the core size for future single-aisle aircraft applications will shrink below 3.0 lb/s. Traditionally, this small core compressor size is in the domain of axi-centrifugal designs, machines that are typically less efficient and limited to pressure ratios of ~25 due to stress and thermomechanical fatigue in the centrifugal impeller. In this light, NASA and Pratt & Whtiney (P&W) embarked upon a program to develop technologies to enable an all-axial high-pressure compressor with a core size below 3.0 lb/s and an overall pressure ratio greater than 50. The challenge with an all-axial high-pressure compressor at this core size is the small span at the rear of the compressor. As core size is scaled down, the rotor tip clearances, stator hub seal clearances, fillet sizes and leading edge thicknesses do not scale, leading to significant efficiency penalties. The goal of this program is to recover this lapse and realize the cycle benefits of small core size and high overall pressure ratio. The small core challenges described are mitigated through design optimization and technology insertion, enabling an estimated 5 to 10% fuel burn reduction relative to 2020 best-in-class. Three test rigs run at NASA Glenn Research Center evolved the small core design: a low-speed rig to vet technology and validate tools, and two high speeds rigs, the first to demonstrate an optimized meanline design and the second to validate technology to manage large rotor tip gaps. The efficiency improvement validated with these rigs has unlocked the small core design space, demonstrating that small core compressors can maintain a similar efficiency to current best-in-class large core size compressors. In addition to advancing the state-of-the-art of technology, the program has also advanced the modeling standards for multistage compressors with large clearance-to-span ratios. A best practice modeling standard was developed over the course of the program, incorporating learning from all three rig programs.

Axial Compressors↗

Characterizing Antibiotic Resistance in Microgravity Environments

The gram-positive bacterium Staphylococcus aureus and the gram-negative Pseudomonas aeruginosa are two of NASA’s designated “medically important microorganisms” commonly co-isolated from spaceflight environments like the International Space Station (ISS). Prior studies demonstrate evidence of increased virulence and antibiotic resistance of each bacterium when grown as single species in space. “Characterizing Antibiotic Resistance in Microgravity Environments” (CARMEn) is an autonomous 30-day ISS payload experiment probing the phenotypic changes of S. aureus and P. aeruginosa biofilms grown together in microgravity. Phenotypic changes are probed through three parallel experiments measuring Extracellular Matrix (ECM) production, antibiotic tolerance, and RNA expression respectively. The ECM experiment uses time-lapse imaging to collect observational morphological data from biofilms stained with Congo Red and Coomassie Blue, the antibiotic tolerance experiment utilizes E-strip testing once samples return to Earth, and RNA expression is measured through RNAseq of samples treated with RNAProtect® during spaceflight.

Antibiotic resistance↗

SDTS Mezzanine Installation

A mezzanine was constructed around the Six-degree-of-freedom Dynamic Test System (SDTS) from January 14th to January 18th, 2022. It was a part of facility-wide upgrades to prepare SDTS for the future of NASA programs and will be used as a viewing platform for test customers to observe docking tests. This video shows an accelerated time lapse of the construction.

Susan R Winnitoy↗

Variable Noise Reduction Systems for a Notional Supersonic Business Jet

A variable noise reduction system consists of equipment on board an airplane that is designed to reduce noise in the vicinity of airports. They are anticipated to be used on supersonic civil aircraft currently under development by industry. They are investigated in this paper for a notional 55-tonne supersonic business jet. The airplane concept was developed by NASA for use in environmental impact studies conducted by the International Civil Aviation Organization. The variable noise reduction system investigated implements a programmed thrust lapse procedure and a programmed flap retraction procedure. The procedures are expected to reduce noise in aircraft certification as well as in operational practice. Behavior of the aircraft in a noise certification setting is considered. Variables of the procedures are optimized to reduce noise levels. Certification considerations unique to these systems are discussed for transport-category large airplanes and for jet-powered airplanes. A novel method for evaluating lateral noise is used.

Aircraft noise↗

Clumped-Isotope Constraint on Upper-Tropospheric Cooling During the Last Glacial Maximum

Ice cores and other paleotemperature proxies, together with general circulation models, have provided information on past surface temperatures and the atmosphere's composition in different climates. Little is known, however, about past temperatures at high altitudes, which play a crucial role in Earth's radiative energy budget. Paleoclimate records at high-altitude sites are sparse, and the few that are available show poor agreement with climate model predictions. These disagreements could be due to insufficient spatial coverage, spatiotemporal biases, or model physics; new records that can mitigate or avoid these uncertainties are needed. Here, we constrain the change in upper-tropospheric temperature at the global scale during the Last Glacial Maximum (LGM) using the clumped-isotope composition of molecular oxygen trapped in polar ice cores. Aided by global three-dimensional chemical transport modeling, we exploit the intrinsic temperature sensitivity of the clumped-isotope composition of atmospheric oxygen to infer that the upper troposphere (effective mean altitude 10–11 km) was 6–9°C cooler during the LGM than during the late preindustrial Holocene. A complementary energy balance approach supports a minor or negligible steepening of atmospheric lapse rates during the LGM, which is consistent with a range of climate model simulations. Proxy-model disagreements with other high-altitude records may stem from inaccuracies in regional hydroclimate simulation, possibly related to land-atmosphere feedbacks.

clumped isotope↗