Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “IRIDIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

A high-performance oxygen evolution catalyst in neutral-pH for sunlight-driven CO 2 reduction

The efficiency of sunlight-driven reduction of carbon dioxide (CO 2 ), a process mimicking the photosynthesis in nature that integrates the light harvester and electrolysis cell to convert CO 2 into valuable chemicals, is greatly limited by the sluggish kinetics of oxygen evolution in pH-neutral conditions. Current non-noble metal oxide catalysts developed to drive oxygen evolution in alkaline solution have poor performance in neutral solutions. Here we report a highly active and stable oxygen evolution catalyst in neutral pH, Brownmillerite Sr 2 GaCoO 5 , with the specific activity about one order of magnitude higher than that of widely used iridium oxide catalyst. Using Sr 2 GaCoO 5 to catalyze oxygen evolution, the integrated CO 2 reduction achieves the average solar-to-CO efficiency of 13.9% with no appreciable performance degradation in 19h of operation. Our results not only set a record for the efficiency in sunlight-driven CO 2 reduction, but open new opportunities towards the realization of practical CO 2 reduction systems.

36 MATERIALS SCIENCE↗

Ionomer-free and recyclable porous-transport electrode for high-performing proton-exchange-membrane water electrolysis

Abstract Clean hydrogen production requires large-scale deployment of water-electrolysis technologies, particularly proton-exchange-membrane water electrolyzers (PEMWEs). However, as iridium-based electrocatalysts remain the only practical option for PEMWEs, their low abundance will become a bottleneck for a sustainable hydrogen economy. Herein, we propose high-performing and durable ionomer-free porous transport electrodes (PTEs) with facile recycling features enabling Ir thrifting and reclamation. The ionomer-free porous transport electrodes offer a practical pathway to investigate the role of ionomer in the catalyst layer and, from microelectrode measurements, point to an ionomer poisoning effect for the oxygen evolution reaction. The ionomer-free porous transport electrodes demonstrate a voltage reduction of > 600 mV compared to conventional ionomer-coated porous transport electrodes at 1.8 A cm −2 and <0.1 mg Ir cm −2 , and a voltage degradation of 29 mV at average rate of 0.58 mV per 1000-cycles after 50k cycles of accelerated-stress tests at 4 A cm −2 . Moreover, the ionomer-free feature enables facile recycling of multiple components of PEMWEs, which is critical to a circular clean hydrogen economy.

08 HYDROGEN↗

Enantioselective α-functionalizations of ketones via allylic substitution of silyl enol ethers

The enantioselective construction of carbon-heteroatom and carbon-carbon bonds that are alpha to ketones leads to the formation of substructures that are ubiquitous in natural products, pharmaceuticals and agrochemicals. Traditional methods to form such bonds have relied on combining ketone enolates with electrophiles. Reactions with heteroatom-based electrophiles require special reagents in which the heteroatom, which is typically nucleophilic, has been rendered electrophilic by changes to the oxidation state. The resulting products usually require post-synthetic transformations to unveil the functional group in the final desired products. Moreover, different catalytic systems are typically required for the reaction of different electrophiles. In this work, we report a strategy for the formal enantioselective α-functionalization of ketones to form products containing a diverse array of substituents at the alpha position with a single catalyst. This strategy involves an unusual reversal of the role of the nucleophile and electrophile to form C-N, C-O, C-S and C-C bonds from a series of masked ketone electrophiles and a wide range of conventional heteroatom and carbon nucleophiles catalysed by a metallacyclic iridium catalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Delayed fluorescence from a zirconium(iv) photosensitizer with ligand-to-metal charge-transfer excited states

Advances in chemical control of the photophysical properties of transition-metal complexes are revolutionizing a wide range of technologies, particularly photocatalysis and light-emitting diodes, but they rely heavily on molecules containing precious metals such as ruthenium and iridium. While the application of earth-abundant ‘early’ transition metals in photosensitizers is clearly advantageous, a detailed understanding of excited states with ligand-to-metal charge transfer (LMCT) character is paramount to account for their distinct electron configurations. Here we report an air- and moisture-stable, visible lightabsorbing Zr(iv) photosensitizer, Zr( Mes PDP Ph ) 2 , where [ Mes PDP Ph ] 2- is the doubly deprotonated form of [2,6-bis(5-(2,4,6- trimethylphenyl)-3-phenyl-1H-pyrrol-2-yl)pyridine]. This molecule has an exceptionally long-lived triplet LMCT excited state (τ = 350 μs), featuring highly efficient photoluminescence emission (Ф = 0.45) due to thermally activated delayed fluorescence emanating from the higher-lying singlet configuration with significant LMCT contributions. Zr( Mes PDP Ph ) 2 engages in numerous photoredox catalytic processes and triplet energy transfer. Our exploration offers a blueprint for future photosensitizer development featuring early transition metals and excited states with significant LMCT contributions.

14 SOLAR ENERGY↗

Unnatural biosynthesis by an engineered microorganism with heterologously expressed natural enzymes and an artificial metalloenzyme

Synthetic biology enables microbial hosts to produce complex molecules from organisms that are rare or difficult to cultivate, but the structures of these molecules are limited to those formed by reactions of natural enzymes. The integration of artificial metalloenzymes (ArMs) that catalyse unnatural reactions into metabolic networks could broaden the cache of molecules produced biosynthetically. Here, in this work, we report an engineered microbial cell expressing a heterologous biosynthetic pathway, containing both natural enzymes and ArMs, that produces an unnatural product with high diastereoselectivity. We engineered Escherichia coli with a heterologous terpene biosynthetic pathway and an ArM containing an iridium–porphyrin complex that was transported into the cell with a heterologous transport system. We improved the diastereoselectivity and product titre of the unnatural product by evolving the ArM and selecting the appropriate gene induction and cultivation conditions. This work shows that synthetic biology and synthetic chemistry can produce, by combining natural and artificial enzymes in whole cells, molecules that were previously inaccessible to nature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Decoupling the catalytic and degradation mechanisms of cobalt active sites during acidic water oxidation

Advancement of iridium-free catalysts for the low-pH oxygen evolution reaction (OER) is required to enable multi-gigawatt-scale proton-exchange water electrolysis. Cobalt-based materials might address this requirement, but little is known about the mechanism of operation of these OER catalysts at low pH. Here we investigate the nature and evolution of the active cobalt sites along with charge- and mass-transfer processes that support their catalytic function within a cobalt–iron–lead oxide material using in situ spectroscopic, gravimetric and electrochemical techniques. We demonstrate that corrosion of the cobalt sites and their reformation through electrooxidation of dissolved Co 2+ do not affect the catalytic mechanism and are decoupled from the OER. The OER-coupled charge transfer is supported by Co (3+δ)+ -oxo-species, which are structurally different from those reported for alkaline/near-neutral conditions and are formed on a relatively slow timescale of minutes. These mechanistic insights might assist in developing genuinely practical catalysts for this vital technology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Discovery and characterization of an acridine radical photoreductant

Not provided.Photoinduced electron transfer (PET) is a phenomenon whereby the absorption of light by a chemical species provides an energetic driving force for an electron-transfer reaction. This mechanism is relevant in many areas of chemistry, including the study of natural and artificial photosynthesis, photovoltaics and photosensitive materials. In recent years, research in the area of photoredox catalysis has enabled the use of PET for the catalytic generation of both neutral and charged organic free-radical species. These technologies have enabled previously inaccessible chemical transformations and have been widely used in both academic and industrial settings. Such reactions are often catalysed by visible-light-absorbing organic molecules or transition-metal complexes of ruthenium, iridium, chromium or copper. Although various closed-shell organic molecules have been shown to behave as competent electron-transfer catalysts in photoredox reactions, there are only limited reports of PET reactions involving neutral organic radicals as excited-state donors or acceptors. This is unsurprising because the lifetimes of doublet excited states of neutral organic radicals are typically several orders of magnitude shorter than the singlet lifetimes of known transition-metal photoredox catalysts. Here we document the discovery, characterization and reactivity of a neutral acridine radical with a maximum excited-state oxidation potential of -3.36 volts versus a saturated calomel electrode, which is similarly reducing to elemental lithium, making this radical one of the most potent chemical reductants reported. Spectroscopic, computational and chemical studies indicate that the formation of a twisted intramolecular charge-transfer species enables the population of higher-energy doublet excited states, leading to the observed potent photoreducing behaviour. Finally, we demonstrate that this catalytically generated PET catalyst facilitates several chemical reactions that typically require alkali metal reductants and can be used in other organic transformations that require dissolving metal reductants.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Concept and realization of Kitaev quantum spin liquids

The Kitaev model is an exactly solvable S = 1/2 spin model on a 2D honeycomb lattice, in which the spins fractionalize into Majorana fermions and form a topological quantum spin liquid (QSL) in the ground state. Several complex iridium oxides, as well as α-RuCl 3 , are magnetic insulators with a honeycomb structure, and it was noticed that they accommodate essential ingredients of the Kitaev model owing to the interplay of electron correlation and spin–orbit coupling. This has led to a race to realize the Kitaev QSL and detect signatures of Majorana fermions. We summarize the theoretical background of the Kitaev QSL ground state and its realization using spin–orbital entangled J eff = 1/2 moments. We provide an overview of candidate materials and their electronic and magnetic properties, including Na 2 IrO 3 , α-Li 2 IrO 3 , β-Li 2 IrO 3 , γ-Li 2 IrO 3 , α-RuCl 3 and H 3 LiIr 2 O 6 . Lastly, we discuss experiments showing that H 3 LiIr 2 O 6 and α-RuCl 3 in an applied magnetic field exhibit signatures of the QSL state and that α-RuCl 3 has unusual magnetic excitations and thermal transport properties consistent with spin fractionalization.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

New insulating antiferromagnetic quaternary iridates M La 10 Ir 4 O 24 (M=Sr, Ba)

Recently, oxides of Ir 4+ have received renewed attention in the condensed matter physics community, as it has been reported that certain iridates have a strongly spin-orbital coupled (SOC) electronic state, J eff = ½, that defines the electronic and magnetic properties. The canonical example is the Ruddlesden-Popper compound Sr 2 IrO 4 , which has been suggested as a potential route to a new class of high temperature superconductor due to the formal analogy between J eff = ½ and the S = ½ state of the cuprate superconductors. The quest for other iridium oxides that present tests of the underlying SOC physics is underway. In this spirit, here we report the synthesis and physical properties of two new quaternary tetravalent iridates, M La 10 Ir 4 O 24 (M = Sr, Ba). The crystal structure of both compounds features isolated IrO 6 octahedra in which the electronic configuration of Ir is d 5 . As a result, both compounds order antiferromagnetically despite the lack of obvious superexchange pathways, and resistivity measurement shows that SrLa 10 Ir 4 O 24 is an insulator.

36 MATERIALS SCIENCE↗

Partial oxidation of step-bound water leads to anomalous pH effects on metal electrode step-edges

The design of better heterogeneous catalysts for applications such as fuel cells and electrolyzers requires a mechanistic understanding of electrocatalytic reactions and the dependence of their activity on operating conditions such as pH. A satisfactory explanation for the unexpected pH dependence of electrochemical properties of platinum surfaces has so far remained elusive, with previous explanations resorting to complex co-adsorption of multiple species and resulting in limited predictive power. This knowledge gap suggests that the fundamental properties of these catalysts are not yet understood, limiting systematic improvement. In this paper, we analyze the change in charge and free energies upon adsorption using density-functional theory (DFT) to establish that water adsorbs on platinum step edges across a wide voltage range, including the double-layer region, with a loss of approximately 0.2 electrons upon adsorption. We show how this as-yet unreported change in net surface charge due to this water explains the anomalous pH variations of the hydrogen underpotential deposition (H upd ) and the potentials of zero total charge (PZTC) observed in published experimental data. This partial oxidation of water is not limited to platinum metal step edges, and we report the charge of the water on metal step edges of commonly used catalytic metals, including copper, silver, iridium, and palladium, illustrating that this partial oxidation of water broadly influences the reactivity of metal electrodes.

25 ENERGY STORAGE↗

Long term stable deep red light-emitting electrochemical cells based on an emissive, rigid cationic Ir( iii ) complex

Here, the new cationic iridium complex [Ir(bzq) 2 (biq)][PF 6 ] (bzq = benzo[ h ]quinolinato and biq = 2,2'-biquinoline) has been synthesized for application as an emitter in light emitting electrochemical cells (LECs). The molecular structure and crystal packing of this complex were established by single X-ray diffraction (SXRD). The electrochemical and photophysical properties of the complex were examined to determine the frontier orbital energies as well as the optical transitions that led to photoemission. The complex was found to emit at 644 nm and 662 nm for powder and thin films, respectively. A high powder photoluminescence quantum yield of 25% was determined, which is attributed to a reduction in vibrational modes of the complex due to the use of the rigid cyclometalated (C^N) bzq ligand. A LEC with [Ir(bzq) 2 (biq)][PF 6 ] as the emitter was fabricated which showed a deep red emission (662 nm) with a luminance of 33.65 cd m –2 , yielding a current efficiency of 0.33 cd A –1 and a power efficiency of 0.2 lm W –1 . Most importantly, the LEC based on [Ir(bzq) 2 (biq)][PF 6 ] demonstrated a lifetime of 280 hours which is among the longest device lifetimes reported for any deep red light emitting LEC.

36 MATERIALS SCIENCE↗

Nickel(ii) complexes based on dithiolate–polyamine binary ligand systems: crystal structures, hirshfeld surface analysis, theoretical study, and catalytic activity study on photocatalytic hydrogen generation

To ascertain the influence of binary ligand systems [1,1-dicyanoethylene-2,2-dithiolate (i-mnt -2 ) and polyamine {tetraen = tris(2-aminoethyl)amine, tren = diethylene triamine and opda = o-phenylenediamine}] on the coordination modes of the Ni(II) metal center and resulting supramolecular architectures, a series of nickel(II) thiolate complexes [Ni(tetraen)(i-mnt)](DMSO) (1), [Ni 2 (tren) 2 (i-mnt) 2 ] (2), and [Ni 2 (i-mnt) 2 (opda) 2 ] n (3) have been synthesized in high yield in one step in water and structurally characterized by single crystal X-ray crystallography and spectroscopic techniques. X-ray diffraction studies disclose the diverse i-mnt -2 coordination to the Ni +2 center in the presence of active polyamine ligands, forming a slightly distorted octahedral geometry (NiN 4 S 2 ) in 1, square planar (NiS 4 ) and distorted octahedral geometries (NiN 6 ) in the bimetallic co-crystallized aggregate of cationic [Ni(tren) 2 ] +2 and anionic [Ni(i-mnt) 2 ] -2 in 2, and a one dimensional (1D) polymeric chain along the [100] axis in 3, having consecutive square planar (NiS 4 ) and octahedral (NiN 6 ) coordination kernels. The N–H···O, N–H···S, N–H···N, N–H···S, N–H···N, and N–H···O type hydrogen bonds stabilize the supramolecular assemblies in 1, 2, and 3 respectively imparting interesting graph-set-motifs. The molecular Hirshfeld surface analyses (HS) and 2D fingerprint plots were utilized for decoding all types of non-covalent contacts in the crystal networks. Atomic HS analysis of the Ni +2 centers reveals significant Ni–N metal–ligand interactions compared to Ni–S interactions. We have also studied the unorthodox interactions observed in the solid state structures of 1–3 by QTAIM and NBO analyses. Moreover, all the complexes proved to be highly active water reduction co-catalysts (WRC) in a photo-catalytic hydrogen evolution process involving iridium photosensitizers, wherein 2 and 3 having a square planar arrangement around the nickel center(s) – were found to be the most active ones, achieving 1000 and 1119 turnover numbers (TON), respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The non-centrosymmetric layered compounds IrTe 2 I and RhTe 2 I

The previously unreported layered compounds IrTe 2 I and RhTe 2 I were prepared by a high-pressure synthesis method. Single crystal X-ray and powder X-ray diffraction studies find that the compounds are isostructural, crystallizing in a layered orthorhombic structure in the non-centrosymmetric, non-symmorphic space group Pca2 1 (#29). Characterization reveals diamagnetic, high resistivity, semiconducting behavior for both compounds, consistent with the +3 chemical valence and d 6 electronic configurations for both iridium and rhodium and the Te–Te dimers seen in the structural study. Finally, electronic band structures are calculated for both compounds, showing good agreement with the experimental results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Computational analysis of metal–metal bonded dimetal tetrabenzoate redox potentials in the context of ammonia oxidation electrocatalysis

Metal–metal bonded complexes are promising candidates for catalyzing redox transformations. Of particular interest is the oxidation of ammonia to dinitrogen, an important half reaction for the potential utilization of ammonia as a fuel or hydrogen carrier. This work computationally explores 30 different metal–metal bonded dimers (5 different metal centers and 6 different benzoate ligand derivatives) to explore the tunability of the redox potential when ammonia is bound to the complexes as an axial ligand, modeling the first step in ammonia oxidation electrocatalysis. We calculate the redox potentials of these compounds, making reference to experimental data when appropriate, identifying two degrees of tunability: a coarse adjustment, changing the metal center, allows for a wide range of redox potentials to be accessed (from +1.0 to –2.0 V vs. ferrocene/ferrocenium in acetonitrile solution) and a fine adjustment, the para-substituent of the benzoate derivative, which affects the redox potential in a smaller range based on the electron donating/withdrawing effects of the substituent. Ruthenium and osmium tetrabenzoate catalysts are prime candidates for next generation ammonia oxidation catalysts because their redox potentials fall within the direct ammonia fuel cell “viability zone” bracketed by the thermodynamic potentials of oxygen reduction (ORR) and nitrogen reduction (NRR). Rhodium tetrabenzoate species fall above the ORR potential, suggesting ammonia oxidation promoted by Rh 2 catalysts could instead be used to facilitate hydrogen production through coupling to hydrogen evolution at a cathode. The redox potentials of rhenium and iridium tetrabenzoate catalysts fall below the NRR potential suggesting that these compounds could be further investigated in the context of electrochemical ammonia synthesis. Each redox event studied involves electron transfer from the M–M δ* orbital regardless of choice of metal or benzoate ligand derivative; this leads us to believe that the chemical reactivity of the various studied compounds will be similar in the context of ammonia oxidation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Revealing the role of redox reaction selectivity and mass transfer in current–voltage predictions for ensembles of photocatalysts

Photocatalysts are conceptually simple reaction units where nanoscale semiconductors integrated with catalysts drive a pair of redox reactions on illumination. However, the proximity of reaction sites performing cathodic and anodic reactions poses dire challenges to realize large light-to-fuel conversion efficiencies. In this study, a powerful, yet straightforward, equivalent-circuit detail-balance modeling framework is developed and applied to evaluate the performance of photocatalytic systems featuring multiple light absorbers. Specifically, low bandgap iridium-doped strontium titanate is modeled as a Z-scheme photocatalyst to achieve desirable hydrogen evolution and iron-based redox shuttle oxidation reactions. Our model has unique capabilities to simulate competing redox reactions and address mass-transfer limitations. In a significant departure from state-of-the-art circuit models, our study develops tools to perform load-line analyses by incorporating a net electrochemical load curve that includes both desired and competing redox reactions. Consequently, reaction selectivity is predicted from equivalent circuit models for photocatalytic and photoelectrochemical systems. Our investigation into ensembles comprised of multiple, semi-transparent light absorbers reveals their potential to outperform a single, optically thick light absorber, particularly when operated under mass-transfer-limited conditions. However, this outcome hinges on minimizing mass-transfer rates of select redox species to prevent undesired reactions of hydrogen oxidation and/or redox shuttle reduction. Our findings demonstrate that reaction selectivity can be achieved by tuning asymmetry in redox species mass-transfer even with perfectly symmetric electrocatalytic charge-transfer coefficients. The influences of various kinetic, mass-transfer, and thermodynamic parameters are explored to offer crucial insights for synthesis of the next-generation of photocatalysts and selective coatings, and reactor designs.

25 ENERGY STORAGE↗

Probing the active sites of oxide encapsulated electrocatalysts with controllable oxygen evolution selectivity

Electrocatalysts encapsulated by nanoscopic overlayers can control the rate of redox reactions at the outer surface of the overlayer or at the buried interface between the overlayer and the active catalyst, leading to complex behavior in the presence of two competing electrochemical reactions. This study investigated oxide encapsulated electrocatalysts (OECs) comprised of iridium (Ir) thin films coated with an ultrathin (2–10 nm thick) silicon oxide (SiO x ) or titanium oxide (TiO x ) overlayer. The performance of SiO x |Ir and TiO x |Ir thin film electrodes towards the oxygen evolution reaction (OER) and Fe(II)/Fe(III) redox reactions were evaluated. An improvement in selectivity towards the OER was observed for all OECs. Overlayer properties, namely ionic and electronic conductivity, were assessed using a combination of electroanalytical methods and molecular dynamics simulations. SiO x and TiO x overlayers were found to be permeable to H 2 O and O 2 such that the OER can occur at the MO x |Ir (M = Ti, Si) buried interface, which was further supported with molecular dynamics simulations of model SiO 2 coatings. In contrast, Fe(II)/Fe(III) redox reactions occur to the same degree with TiO x overlayers having thicknesses less than 4 nm as bare electrocatalyst, while SiO x overlayers inhibit redox reactions at all thicknesses. This observation is attributed to differences in electronic transport between the buried interface and outer overlayer surface, as measured with through-plane conductivity measurements of wetted overlayer materials. These findings reveal the influence of oxide overlayer properties on the activity and selectivity of OECs and suggest opportunities to tune these properties for a wide range of electrochemical reactions.

08 HYDROGEN↗

Dynamic high-temperature Kolsky tension bar techniques

Kolsky tension bar techniques were modified for dynamic high-temperature tensile characterization of thin-sheet alloys. An induction coil heater was used to heat the specimen while a cooling system was applied to keep the bars at room temperature during heating. A preload system was developed to generate a small pretension load in the bar system during heating in order to compensate for the effect of thermal expansion generated in the high-temperature tensile specimen. A laser system was applied to directly measure the displacements at both ends of the tensile specimen in order to calculate the strain in the specimen. A pair of high-sensitivity semiconductor strain gages was used to measure the weak transmitted force due to the low flow stress in the thin specimen at elevated temperatures. As an example, the high-temperature Kolsky tension bar was used to characterize a DOP-26 iridium alloy in high-strain-rate tension at 860 s(-1)/1030 degrees C.

Song, Bo↗

Electron and Hole Transport in a Wide Bandgap Organic Phosphine Oxide for Blue Electrophosphorecsence

We report blue phosphorescent organic light-emitting devices (OLEDs) using an ambipolar host, N-(4-diphenylphosphoryl phenyl) carbazole (MPO12), doped with iridium (III) bis[4,6-difluorophenyl)-pyridinato-N,C2´]picolinate (FIrpic). The external quantum efficiency and operating voltage is 9.1±0.1% and 4.8 V, respectively, measured at a brightness of 800 cd/m2 with no outcoupling enhancement. By varying the layer structure of the OLEDs, we show that MPO12 is capable of transporting both electrons and holes, in contrast to previous demonstrations using diphosphine oxides, which only transported electrons. The improved hole transport results in improved device efficiency.

diphosphine↗