Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INDIA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Viruses of Nitrogen-Fixing Mesorhizobium Bacteria in Globally Distributed Chickpea Root Nodules

Legume nodules are specialized environments on plant roots that are induced and dominated by nitrogen-fixing bacteria. Bacteriophages (phages) in these nodules could potentially provide top-down controls on the population size and, therefore, the function of nitrogen-fixing symbionts. Here we sought to characterize the diversity and biogeographical patterns of phages that infect nitrogen-fixing Mesorhizobium symbionts isolated from root nodules, leveraging 266 genomes of Mesorhizobium isolated from nodules and 648 nodule metagenomes collected from three species of chickpea plants ( Cicer spp.) under different agricultural management practices, spanning eight countries on five continents. We identified 106 phage populations (viral operational taxonomic units [vOTUs]) in Mesorhizobium draft genomes, 37% of which were confirmed as likely prophages. These vOTUs were detected in 64% of the Mesorhizobium-dominated nodule metagenomes and 58% of the Mesorhizobium isolates. Per metagenome, 1 to 16 putative Mesorhizobium vOTUs were detected, with more than half of the nodules containing only one such vOTU. The majority of vOTUs were detected exclusively in Ethiopia, followed by India and Morocco, with the lowest richness of putative Mesorhizobium phages in countries that applied industrial Mesorhizobium inoculants to crops. Two vOTUs were identified in five or more countries and in nodules dominated by different strains of Mesorhizobium, suggesting infection of diverse Mesorhizobium hosts and long-term interactions. Beta-diversity of these Mesorhizobium phage assemblages was significantly correlated with the dominant Mesorhizobium strain, but not with measured environmental parameters. Our findings indicate that nitrogen-fixing nodules in chickpea plants can contain distinct viral assemblages, with potential impacts on the nodule microbiome that bear further exploration.

Microbiology↗

Fiber optic sensors for monitoring sodium circuits and power grid cables

At Kalpakkam, India, a programme on development of Raman Distributed Temperature sensor (RDTS) for Fast Breeder Reactors (FBR) application is undertaken. Leak detection in sodium circuits of FBR is critical for the safety and performance of the reactors. It is demonstrated that RDTS can be usefully employed in monitoring sodium circuits and in tracking the percolating sodium in case of any leak. Aluminum Conductor Steel Reinforced (ACSR) cable is commonly used as overhead power transmission cable in power grid. A second application demonstrates the suitability of using RDTS to monitor this transmission cable for any defect. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Testing of inductively coupled Eddy current position sensor of diverse safety rod in sodium

Prototype Fast Breeder Reactor (PFBR) is 500 MWe sodium cooled reactor under construction at Kalpakkam (India)). To improve the reliability of shutdown, Diverse Safety Rods (DSRs) are used in-addition to normal Control and Safety rods. During reactor operating condition, the DSR is parked above the active core and held in its top position by an electromagnet. In the event of a scram signal from the safety logic, the electromagnet holding the DSR is de-energised. Hence the DSR is released into the active core and at the end of travel DSR gets deposited in its bottom position. Because of the mechanical constraints, hard wired connectivity is not permitted from the DSR subassembly to the instrumentation outside the reactor. Hence an inductively coupled Eddy Current Position Sensor (ECPS) has been conceptualized to detect that the DSR has reached its bottom most position and to measure the drop time. Results of feasibility study on laboratory model have been reported earlier. Testing of a 1:1 scale engineering model of ECPS is reported in this paper. Results obtained from the high temperature sodium testing of ECPS indicate a clearly measurable change in pick up voltage with sensitivity of 11 % at 675 Hz. The ECPS is in advanced stage of implementation in DSRDM of PFBR. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Study of beam dynamics of a 100 MeV electron linac

A 100 MeV electron linear accelerator is proposed to be built by APPD, BARC, Mumbai, India for neutron generation purposes. This paper presents the results of electron beam tracking for a 100 MeV standing wave electron linac to determine preferential operation parameters from the results of beam dynamics studies. (author)

43 PARTICLE ACCELERATORS↗

Extraction of nuclear fuels from coal using microwave induced plasma gasification and electromagnetic plasma separation processes

Coal is till today the most commonly used fuel worldwide for electricity generation, with the largest consumers being China, USA and India respectively. Coal contains small amounts of radioactive elements such as uranium, thorium, potassium-40, radium and radon, in the range of a few parts per million, which make their removal difficult and economically unfeasible through conventional industrial technologies. The concentrations gets amplified in the coal ash (fly ash), thereby presenting environmental and human health risks. In this preliminary paper, we propose an innovative clean coal technology, namely microwave induced plasma gasification (MIPG) to turn coal into syngas, while the molten residue is sent to a microwave-heated electromagnetic plasma separator for isolation of radioactive elements. With the adoption of this technology, coal producing and consuming nations will be able to satisfy a large portion of their nuclear fuel requirements from clean coal. (author)

01 COAL, LIGNITE, AND PEAT↗

The NASA ISRO SAR (NISAR) Mission - Validation of Science Measurement Requirements

The NASA ISRO Synthetic Aperture Radar (NISAR) is scheduled for launch early in 2024 from the Satish Dhawan Space Centre (SDSC), at Sriharikota, near Chennai, India. This mission is the result of a collaboration between NASA and Indian Space Research Organization (ISRO), where NASA has contributed elements of the mission such as an L-band SAR, and ISRO has contributed other elements, such as an S-band SAR. After successful launch, the NISAR mission will collect left-looking L-band SAR data over most of the Earth’s land areas twice during every 12-day exact repeat orbit. (once while in an ascending orbit direction and once while in a descending orbit direction). NASA and ISRO have individual and joint requirements on the mission that include the performance of the imaging radars onboard the spacecraft. For example, NASA must demonstrate that this L-band SAR will achieve a set of identified science measurement accuracy requirements that span Ecosystem science, Solid Earth science, and Cryosphere science disciplines. Likewise, ISRO has several applications objectives on both the L-band and S-band data from NISAR that the ISRO science team and project will be developing and testing. Pre-launch and post-launch activities have been planned to validate that these requirements are met. Here, we will discuss how the NASA plans are being executed and will present any initial results at the conference.

Chapman, Bruce↗

Evaluation of Soiling and Potential Mitigation Approaches on Photovoltaic Glass

The natural soiling of photovoltaic cover glass has recently been shown to include both an inorganic and organic particulate matter. Under favorable growth conditions, the latter can lead to the growth of dense colonies of filamentous fungi, which potentially leads to measurable performance losses over time. Herein, we report on a field study where glass coupon samples were deployed in soiling-prone locations, which focused on Dubai (United Arab Emirates) and Mumbai (India). For each site location, clear differences in the soiling were observed. The samples from Mumbai were contaminated with an abundance of filamentous fungi, whereas the samples from Dubai had primarily inorganic contamination. As a result, the effectiveness of soiling mitigation strategies, which include cleaning techniques and glass coatings, are discussed in detail.

14 SOLAR ENERGY↗

Real-time Distribution Simulation and Application Development for Power Systems Education

To help bridge the gap between traditional power system engineering instruction and emerging industry needs, a new set of classroom and research tools are needed. Real-time simulation tools emulating power system control room software present an opportunity to introduce students to the array of operational considerations, technical challenges, and decision-making associated with power system operations. The GridAPPS-D platform is proposed to support coursework and academic research as it provides an open-source platform for simulation, application development, and software integration. The GridAPPS-D platform, simulation capabilities, development environment, and interactive training are discussed in the context of lessons-learned from implementation for undergraduate and graduate students in the US and India. A series of potential GridAPPS-D supported academic capabilities are introduced.

Active distribution networks, open educational res↗

Characterization of Field Exposed Thin Film Modules: Preprint

Test arrays of thin film modules have been deployed at the Solar Energy Centre near New Delhi, India since 2002-2003. Performances of these arrays were reported by O.S. Sastry [1]. This paper reports on NREL efforts to support SEC by performing detailed characterization of selected modules from the array. Modules were selected to demonstrate both average and worst case power loss over the 8 yearsof outdoor exposure. The modules characterized included CdTe, CIS and three different types of a-Si. All but one of the a-Si types were glass-glass construction. None of the modules had edge seals. Detailed results of these tests are presented along with our conclusions about the causes of the power loss for each technology.

14 SOLAR ENERGY↗

A Detailed Analysis of Visible Defects Formed in Commercial Silicon Thin-Film Modules During Outdoor Exposure

We analyzed defects in silicon thin-film tandem (a-Si:H/..mu..c-Si:H) modules from an outdoor installation in India. The inspection of several affected modules reveals that most of the defects -- which optically appear as bright spots -- were formed primarily nearby the separation and series connection laser lines. Cross-sectional SEM analysis reveals that the bright spots emerge due to electrical isolation, caused by a delamination of the cell from the front TCO in the affected area. In addition, the morphology of the a-Si:H top cell differs in the delaminated area compared to the surrounding unaffected area. We propose that these effects are potentially caused by an explosive and thermally triggered liberation of hydrogen from the a-Si:H layer. Electrical and thermal measurements reveal that these defects can impact the cell performance significantly.

14 SOLAR ENERGY↗

Optical Microscopy Study of Soiling on Photovoltaic Glass: Evaluation of Mitigation Strategies

The natural soiling of photovoltaic cover glass has recently been shown to include both inorganic and organic particulate matter. Under favorable growth conditions, the latter can lead to the growth of dense colonies of filamentous fungi, potentially leading to measurable performance losses over time. Herein, we report on a field study where glass coupon samples were deployed in soiling-prone locations, focusing on Dubai (United Arab Emirates) and Mumbai (India). For each site location, clear differences in the soiling were observed. The samples from Mumbai were contaminated with an abundance of filamentous fungi whereas the samples from Dubai had primarily inorganic contamination. The effectiveness of soiling mitigation strategies, including cleaning techniques and glass coatings, are discussed in detail.

14 SOLAR ENERGY↗

Assessing the Impact of Renewable Energy Sources to Achieve Net Zero Emissions

The mass generation of green energy through the pathway of Renewable Energy Sources (RES), is one of the major decisive components contributing to the concept of decarbonization. The energy sector assessment reveals that out of per kWh energy produced, renewable energy emits between 9 and 1000 gCO2 equivalent on a life-cycle basis. Contemplating the literature and the latest reports released by world-wide energy department(s), this study presents a comprehensive concept of carbon footprint, its causes and effects including major impact on biodiversity and human life. The study discusses the substantial steps taken by developing countries like India in leveraging RES for the production of energy and its progressive impact on ecology. The discussion would be inclusive of major change and transformation which has brought significant drop of 16% in the greenhouse gas (GHG) emissions by installation of 104.9 GW of RES excluding Hydro. The appropriate steps taken forward therefore align with the Sustainable Development Goals (SDGs) of the United Nation (UN) in achieving net zero emission (NZE).

decarbonization↗

Burial and exhumation of the Hoh Xil Basin, northern Tibetan Plateau: Constraints from detrital (U‐Th)/He ages

Abstract The uplift and associated exhumation of the Tibetan Plateau has been widely considered a key control of Cenozoic global cooling. The south‐central parts of this plateau experienced rapid exhumation during the Cretaceous–Palaeocene periods. When and how the northern part was exhumed, however, remains controversial. The Hoh Xil Basin (HXB) is the largest late Cretaceous–Cenozoic sedimentary basin in the northern part, and it preserves the archives of the exhumation history. We present detrital apatite and zircon (U‐Th)/He data from late Cretaceous–Cenozoic sedimentary rocks of the western and eastern HXB. These data, combined with regional geological constraints and interpreted with inverse and forward model of sediment deposition and burial reheating, suggest that the occurrence of ca. 4–2.7 km and ca. 4–2.3 km of vertical exhumation initiated at ca. 30–25 Ma and 40–35 Ma in the eastern and western HXB respectively. The initial differential exhumation of the eastern HXB and the western HXB might be controlled by the oblique subduction of the Qaidam block beneath the HXB. The initial exhumation timing in the northern Tibetan Plateau is younger than that in the south‐central parts. This reveals an episodic exhumation of the Tibetan Plateau compared to models of synchronous Miocene exhumation of the entire plateau and the early Eocene exhumation of the northern Tibetan Plateau shortly after the India–Asia collision. One possible mechanism to account for outward growth is crustal shortening. A simple model of uplift and exhumation would predict a maximum of 0.8 km of surface uplift after upper crustal shortening during 30–27 Ma, which is insufficient to explain the high elevations currently observed. One way to increase elevation without changing exhumation rates and to decouple uplift from upper crustal shortening is through the combined effects of continental subduction, mantle lithosphere removal and magmatic inflation.

Dai, Jin‐Gen↗

Consumption-Based Conservation Targeting: Linking Biodiversity Loss to Upstream Demand through a Global Wildlife Footprint: Global wildlife footprint

Although most conservation efforts address the direct, local causes of biodiversity loss, effective long-term conservation will require complementary efforts to reduce the upstream economic pressures, such as demands for food and forest products, which ultimately drive these downstream losses. Here, we present a wildlife footprint analysis that links global losses of wild birds to consumer purchases across 57 economic sectors in 129 regions. The United States, India, China, and Brazil have the largest regional wildlife footprints, while per-person footprints are highest in Mongolia, Australia, Botswana, and the United Arab Emirates. A US$100 purchase of bovine meat or rice products occupies approximately 0.1 km 2 of wild bird ranges, displacing 1–2 individual birds, for 1 year. Globally significant importer regions, including Japan, the United Kingdom, Germany, Italy, and France, have large footprints that drive wildlife losses elsewhere in the world and represent important targets for consumption-focused conservation attention.

Biodiversity & Conservation↗

Tigers at a crossroads: Shedding light on the role of Bangladesh in the illegal trade of this iconic big cat

Abstract Unsustainable wildlife trade is a major threat to many species, but quantifying trade remains challenging, as seizure data provides an incomplete understanding. For this reason, integrating multiple types of information, including interviews with actors involved in trade, is crucial if we are to understand the problem better. Hence, in this study, we digitized Bangladesh Forest Department tiger seizure records to identify trade routes and interviewed 163 individuals involved in trafficking tigers through Bangladesh's air, sea and land ports, including poachers, smugglers, and traders. We identified six ports used to import tigers, 14 ports used for tiger export and three ports showing bi‐directional trade. Elite Bangladeshis were the most important consumer group, and tigers were sourced from populations in NE India, Myanmar and Bangladesh Sundarbans to supply domestic demand. Tiger products were exported to 14 countries, including seven G20 nations, with Bangladeshi expatriates as the consumer group in three countries (United Kingdom, Germany and Qatar). Rising economic development in Bangladesh over the last decade, combined with deep‐rooted cultural ties to tiger consumption, has led to a rise in domestic demand. Additionally, rapid growth in international transport links has increased smuggling and connected local traders with global markets, increasing the complexity of global trade. These findings suggest Bangladesh is poised to play a pivotal role in tiger conservation over the next decade, requiring strong national strategies to reduce trade opportunities, disrupt networks and weaken demand.

Uddin, Nasir↗

Performance and Emission Investigations of Jatropha and Karanja Biodiesels in a Single-Cylinder Compression-Ignition Engine Using Endoscopic Imaging

Biofuels produced from non-edible sources that are cultivated on marginal lands represent a viable source of renewable and carbon-neutral energy. In this context, biodiesel obtained from Jatropha and Karanja oil seeds have received significant interest, especially in South Asian subcontinent. Both of these fuels are produced from non-edible plant seeds with high oil content, which can be grown on marginal lands. In this research, we have investigated the performance and emission characteristics of Jatropha and Karanja methyl esters (biodiesel) and their blends with diesel. Another objective is to examine the effect of long-term storage on biodiesel’s oxidative stability. The biodiesels were produced at Indian Institute of Technology Kanpur, (IIT Kanpur), India, and the engine experiments were performed in a single cylinder, 4-stroke, compression ignition engine at Argonne National Laboratory (ANL), Chicago. An endoscope was used to visualize in-cylinder combustion events and examine the soot distribution. The effects of fuel and start of injection (SOI) on engine performance and emissions were investigated. Results indicated that ignition delay was shorter with biodiesel. Consequently the cylinder pressure and premixed heat release were higher for diesel compared to biodiesel. Engine performance data for biodiesel (J100, K100) and biodiesel blends (J30, K30) showed an increase in break thermal efficiency (BTE) (10.9%, 7.6% for biodiesel and blend, respectively), BSFC (13.1% and 5.6%), and NOx emission (9.8% and 12.9%), and a reduction in BSHC (8.64% and 12.9%), and BSCO (15.56% and 4.0%). The soot analysis from optical images qualitatively showed that biodiesel and blends produced less soot compared to diesel. The temperature profiles obtained from optical imaging further supported higher NOx in biodiesels and their blends compared to diesel. Additionally, the data indicated that retarding the injection timing leads to higher BSFC, but lower flame temperatures and NOx levels along with higher soot formation for all test fuels. The physicochemical properties such as fatty acid profile, cetane number, and oxygen content in biodiesels support the observed combustion and emission characteristics of the fuels tested in this study. Finally, the effect of long-term storage is found to increase the glycerol content, acid value and cetane number of the two biodiesels, indicating some oxidation of unsaturated fatty acids in the fuels.

09 BIOMASS FUELS↗

State of the Art and Future Research Needs for Multiscale Analysis of Li-Ion Cells

The performance, safety, and reliability of Li-ion batteries are determined by a complex set of multiphysics, multiscale phenomena that must be holistically studied and optimized. This paper provides a summary of the state of the art in a variety of research fields related to Li-ion battery materials, processes, and systems. The material presented here is based on a series of discussions at a recently concluded bilateral workshop in which researchers and students from India and the U.S. participated. It is expected that this summary will help understand the complex nature of Li-ion batteries and help highlight the critical directions for future research.

25 ENERGY STORAGE↗