SEARCH · Engineering Papers

Results for “IDENTIFICATION SYSTEMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

All sources NASA NTRS DOE OSTI

NASA NTRS1985

Large space structure flight experiment

The primary purpose of this work is to provide a first order feasibility analysis of a large space structure flight experiment. The feasibility issues are addressed from the control technologist's point of view. Control and system identification techniques and algorithms are evaluated with a selected experiment antenna structure through analysis and computer simulation. The required and actuator hardware is assessed and its requirements examined with respect to the current state-of-the-art. The results of this study show that a shuttle attached flight experiment is feasible with moderate advancement of current control technology. The control and identification algorithms are well understood and can be adapted to the flight computers with additional dedicated processors. Although it is necessary to select a focused flight configuration to produce quantitative results, it is believed that, in general, performance requirements and capabilities, timelines, hardware, and algorithms are sufficiently generic in nature and can be applied to other configurations.

Schwab, D. C.↗

NASA NTRS1984

Large space structures ground and flight progress

Unprecedented challenges arise in connection with the design and certification of space systems which are too large to be transported into orbit fully assembled. Special situations arising in the case of such systems make it necessary to rely much more on analysis than in past programs. The present investigation is concerned with the status of some research activities oriented primarily to the improvement of analysis capabilities through coordinated ground and flight testing. Aspects of system identification are explored, taking into account an eigensystem realization algorithm, and the Hoop-Column Antenna concept. Attention is also given to a suitable method for analyzing the Hoop-Column antenna structure, a deployment analysis, certification issues for large space structures, a generic space station model, and the use of actuators.

Pinson, L. D.↗

NASA NTRS1986

Space Station dynamic modeling, control and simulation

Dynamic disturbances of many orders of magnitude greater than those of conventional spacecraft will be routine for the Space Station. Accurate knowledge of inflight structural dynamics and disturbances will be lacking. System identification will reduce uncertainties. To deal with the remaining model errors and time-varying elements, adaptive control may be required. Dynamic models for two Space Station configurations are derived. A direct model reference adaptive control algorithm is synthesized and evaluated with respect to the station model parameter errors and plant dynamics truncations. Both the rigid body and the flexible modes are treated. Simulation results show that convergence of the adaptive algorithm can be achieved in 100 to about 300 seconds with reasonable performance even during Shuttle hard docking operations in which station mass and inertia are instantaneously changed by more than 100 percent.

Ih, C.-H. C.↗

NASA NTRS1985

Control of Flexible Structures (COFS) Flight Experiment Program

The Control of Flexible Structures (COFS) Flight Experiment Program consists of a series of four Shuttle-attached experiments specifically designed to systematically evaluate algorithms and techniques for on-orbit systems identification and flexible body control of large flexible structures, and as such, develops the enabling technologies for future NASA missions such as the evolutionary Space Station and large orbital antennas. These flight experiments are conducted on 1-year centers starting in 1989. This paper presents a description of the test article for the first two flights (COFS-I) and a discussion of the strategy for conducting the various experiments. A guest investigator program provides the opportunity for the research community to participate in the structures/controls research associated with the multi-flight COFS Program.

Fontana, A.↗

NASA NTRS1987

Identifying Vibration Parameters in Large Structures

Analytical method separately examines low-frequency and highfrequency behavior. Report discusses techniques for identifying rigid-body parameters, flexible-body parameters, and quasi-static disturbances in large structures. Techniques developed to aid in planning space station. Though effort directed towards space station dynamic model and environment, proposed methodology for systems identification is generic enough to allow application to arbitrarily large space structures and spacecraft configurations.

Bayard, D. S.↗

NASA NTRS1986

COFS 3: Multibody dynamics and control technology

COFS 3 is the third project within the Control of Flexible Structures (COFS) program. It deals with developing multibody dynamics and control technology for large space structures. It differs from COFS 1 and 2 in two respects. First, it addresses a more complex class of structure, and second it is basically a scale model ground test and analysis program while COFS 1 and 2 feature Shuttle flight experiments. The specific technology thrusts within COFS 3 are model sensitivities, test methods, analysis validation, systems identification, and vibration suppression. The COFS 3 project will develop the methods for using dynamically scaled models and analysis to predict the structural dynamics of large space structures. The project uses the space station as a focus because it is typical of the structures of interest and provides the first opportunity to obtain full-scale on-orbit dynamics data.

Letchworth, Robert↗

NASA NTRS1987

Behavior sensitivities for control augmented structures

During the past few years it has been recognized that combining passive structural design methods with active control techniques offers the prospect of being able to find substantially improved designs. These developments have stimulated interest in augmenting structural synthesis by adding active control system design variables to those usually considered in structural optimization. An essential step in extending the approximation concepts approach to control augmented structural synthesis is the development of a behavior sensitivity analysis capability for determining rates of change of dynamic response quantities with respect to changes in structural and control system design variables. Behavior sensitivity information is also useful for man-machine interactive design as well as in the context of system identification studies. Behavior sensitivity formulations for both steady state and transient response are presented and the quality of the resulting derivative information is evaluated.

Manning, R. A.↗

NASA NTRS1987

Joint Optics Structures Experiment (JOSE)

The objectives of the JOSE program is to develop, demonstrate, and evaluate active vibration suppression techniques for Directed Energy Weapons (DEW). DEW system performance is highly influenced by the line-of-sight (LOS) stability and in some cases by the wave front quality. The missions envisioned for DEW systems by the Strategic Defense Initiative require LOS stability and wave front quality to be significantly improved over any current demonstrated capability. The Active Control of Space Structures (ACOSS) program led to the development of a number of promising structural control techniques. DEW structures are vastly more complex than any structures controlled to date. They will be subject to disturbances with significantly higher magnitudes and wider bandwidths, while holding higher tolerances on allowable motions and deformations. Meeting the performance requirements of the JOSE program requires upgrading the ACOSS techniques to meet new more stringent requirements, the development of requisite sensors and acturators, improved control processors, highly accurate system identification methods, and the integration of hardware and methodologies into a successful demonstration.

Founds, David↗

NASA NTRS1987

Efficient computation of parameter confidence intervals

An important step in system identification of aircraft is the estimation of stability and control derivatives from flight data along with an assessment of parameter accuracy. When the maximum likelihood estimation technique is used, parameter accuracy is commonly assessed by the Cramer-Rao lower bound. It is known, however, that in some cases the lower bound can be substantially different from the parameter variance. Under these circumstances the Cramer-Rao bounds may be misleading as an accuracy measure. This paper discusses the confidence interval estimation problem based on likelihood ratios, which offers a more general estimate of the error bounds. Four approaches are considered for computing confidence intervals of maximum likelihood parameter estimates. Each approach is applied to real flight data and compared.

Murphy, Patrick C.↗

NASA NTRS1987

Efficient placement of structural dynamics sensors on the space station

System identification of the space station dynamic model will require flight data from a finite number of judiciously placed sensors on it. The placement of structural dynamics sensors on the space station is a particularly challenging problem because the station will not be deployed in a single mission. Given that the build-up sequence and the final configuration for the space station are currently undetermined, a procedure for sensor placement was developed using the assembly flights 1 to 7 of the rephased dual keel space station as an example. The procedure presented approaches the problem of placing the sensors from an engineering, as opposed to a mathematical, point of view. In addition to locating a finite number of sensors, the procedure addresses the issues of unobserved structural modes, dominant structural modes, and the trade-offs involved in sensor placement for space station. This procedure for sensor placement will be applied to revised, and potentially more detailed, finite element models of the space station configuration and assembly sequence.

Lepanto, Janet A.↗

NASA NTRS1988

A summary of recent NASA/Army contributions to rotorcraft vibrations and structural dynamics technology

The requirement for low vibrations has achieved the status of a critical design consideration in modern helicopters. There is now a recognized need to account for vibrations during both the analytical and experimental phases of design. Research activities in this area were both broad and varied and notable advances were made in recent years in the critical elements of the technology base needed to achieve the goal of a jet smooth ride. The purpose is to present an overview of accomplishments and current activities of govern and government-sponsored research in the area of rotorcraft vibrations and structural dynamics, focusing on NASA and Army contributions over the last decade or so. Specific topics addressed include: airframe finite-element modeling for static and dynamic analyses, analysis of coupled rotor-airframe vibrations, optimization of airframes subject to vibration constraints, active and passive control of vibrations in both the rotating and fixed systems, and integration of testing and analysis in such guises as modal analysis, system identification, structural modification, and vibratory loads measurement.

Kvaternik, Raymond G.↗

NASA NTRS1988

Recursive inversion of externally defined linear systems

The approximate inversion of an internally unknown linear system, given by its impulse response sequence, by an inverse system having a finite impulse response, is considered. The recursive least squares procedure is shown to have an exact initialization, based on the triangular Toeplitz structure of the matrix involved. The proposed approach also suggests solutions to the problems of system identification and compensation.

Bach, Ralph E., Jr.↗

NASA NTRS1988

Proceedings of the 4th Annual SCOLE Workshop

This publication is a collection of papers presented at the Fourth Annual Spacecraft Control Laboratory Experiment (SCOLE) Workshop held at the U.S.A.F. Academy, Colorado Springs, Colorado, November 16, 1987. The papers address the modeling, systems identification, and control synthesis for the Spacecraft Control Laboratory Experiment (SCOLE) configuration.

Taylor, Lawrence W., Jr.↗

NASA NTRS1988

Control design approaches for LaRC experiments

Control design approaches for SCOLE experimentation at Langley Research Center are considered; the following future topics are discussed: (1) Effects of Actuator Dynamics; (2) Refinement of STAC; (3) System Identification; and (4) Experimentation.

Yurkovich, Steve↗

NASA NTRS1988

Some test/analysis issues for the space station structural characterization experiment

The Space Station Structural Characterization Experiment (SSSCE) 1,2 is an early space flight experiment that uses the space station as a generic structure to study the dynamic characteristics of Large Space Structures (LSS). On-orbit modal testing will be conducted to determine natural frequencies, mode shapes and damping of dominant structural modes of the space structure assembly. This experiment will utimately support the development of system identification and analytical modeling techniques for Large Space Structures. In order to ensure the success of SSSCE (in-space validation of modeling techniques for LSS), adequate measurement and instrumentation requirements have to be established during the experiment-definition study. Among the issues affecting these requirements, spatial and modal coverages of the modal test data are of particular interest. Topics such as total number of sensors, type of measurements (translation and rotation), optimal sensor locations (measurement degrees-of-freedom), selection of target modes, effects of modal superposition and truncation, separation of global and local modes, etc., are all a fundamental importance and must be investigated.

Chou, Chaur-Ming↗

NASA NTRS1988

Controls and guidance: Space

The Space Controls and Guidance Research and Technology Program is directed toward enabling the next generation of space transportation systems, large future spacecraft, and space systems such as the Space Station to have large communication antennas and high precision segmented reflector astrophysical telescopes. The new generation of transportation vehicles has demanding requirements to provide for an order of magnitude reduction in cost as well as an increase in capability. The future orbital facilities have demanding control requirements for pointing and stabilization, momentum management, build-up and growth accomodation, and disturbance management. To address these advanced requirements, the research and development program is designed to provide the generic technology base to support the implementation of advanced guidance, navigation, and control. The area of computational controls will be stressed in order to develop cost effective, high speed, high fidelity control system simulation and analysis and synthesis tools. The trust of this work will be to develop methods and software to enable analysis and real-time hardware-in-the-loop simulation of complex spacecraft for control design certification. To address future orbital facilities requirements, an advanced technology program is underway in system identification, distributed control, integrated controls/structures design methods, and advanced sensors and actuators. Because the behavior of large, light weight per unit area deployable/assembled spacecraft is greatly influenced by the ground environment, the testing and verification activity is both ground- and space-based.

Dibattista, John D.↗

NASA NTRS1988

An expert system based intelligent control scheme for space bioreactors

An expert system based intelligent control scheme is being developed for the effective control and full automation of bioreactor systems in space. The scheme developed will have the capability to capture information from various resources including heuristic information from process researchers and operators. The knowledge base of the expert system should contain enough expertise to perform on-line system identification and thus be able to adapt the controllers accordingly with minimal human supervision.

San, Ka-Yiu↗

NASA NTRS1988

A variance based confidence criterion for ERA identified modal parameters

The realization theory is developed in a systematic manner for the Eigensystem Realization Algorithm (ERA) used for system identification. First, perturbation results are obtained which describe the linearized changes in the identified parameters resulting from small change in the data. Formulas are then derived that can be used to evaluate the variance of each of the identified parameters, assuming that the noise level is sufficiently low to allow the application of linearized results. These variances can be converted to give confidence intervals for each of the parameters for any chosen confidence level.

Longman, Richard W.↗