Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Fracture properties and microstructure formation of hardened alkali-activated slag/fly ash pastes

This study presents a comprehensive experimental investigation on the fracture properties of hardened alkali-activated slag/fly ash (AASF) pastes in relation to the microstructure formation and reaction product composition. The main reaction product in AASF is C-(N-)A-S-H gel along with minor hydrotalcite phase, with the polymerization of C-(N-)A-S-H gel substantially governed by its Ca/Si ratio. Strong positive correlations are identified between the Ca/Si ratios of C-(N-)A-S-H gel and the fracture properties K{sub Ic} (J{sub tip}), whereas, the compressive strength of AASF pastes is primarily determined by its capillary porosity (>0.01 μm). The disagreements between the Ca/Si ratios and corresponding intrinsic mechanical properties of C-(N-)A-S-H gel as proof by contradiction indicate that the fracture properties K{sub Ic} (J{sub tip}) of AASF pastes could be dominated by a cohesion/adhesion-based mechanism. These findings provide promising guidance for fine-tuning the fracture properties of AASF and also advise on the tailoring strategies for high-performance composite such as strain-hardening geopolymer composite.

36 MATERIALS SCIENCE↗

Stannous chloride as a tool for mercury stripping in contaminated streams: Experimental assessment of toxicity in an invertebrate model species

In this work, the chronic toxicity of an innovative Hg water treatment system using tin (Sn) (II) chloride (SnCl 2 ) followed by air stripping was assessed through measurements of survival, growth, and reproduction rate in the freshwater cladoceran Ceriodaphnia dubia, a model species for toxicity testing. We first calculated the concentrations of Hg causing 25% reduction in survival and reproduction (Lethal or Inhibition Concentrations, or LC 25 and IC 25 , for survival and reproduction, respectively) through exposure to aqueous Hg at concentrations ranging from 0 to 25,000 ng L -1 . Then, we treated media (DMW and natural stream water) contaminated with Hg at LC 25 and IC 25 concentrations with SnCl 2 at a Sn:Hg stoichiometric ratio of 8:1 and air stripping and exposed C. dubia to this Sn-amended media. Our results showed that Hg significantly affected survival, reproduction rates and impaired growth. SnCl 2 -treatment removed 100% of the Hg from the media at all concentrations tested with no deleterious effects on survival, growth and reproduction. Our results confirmed the efficacy of SnCl 2 in removing aqueous Hg from stream water and showed that the added Sn did not impact C. dubia at the concentrations tested, supporting the suitability of SnCl 2 -based treatments in appropriate Hg-contaminated environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantification of transient stretch effects on kernel-vortex interactions in premixed methane-air flames

Relative flame speeds of time-dependent highly curved premixed methane-air flames (spark-ignited flame kernels) interacting with a laminar vortex have been quantified using high-speed chemiluminescence imaging, particle image velocimetry, and piezoelectric pressure measurements. The goals of this study are to improve fundamental understanding of transient stretch effects on highly curved premixed flames, to provide practical insight into the turbulent growth of spark-ignited flame kernels in internal combustion (IC) engines burning light hydrocarbon fuels, and to provide data for IC engine ignition and combustion model development. Lean and rich CH{sub 4}-O{sub 2}-N{sub 2} flames were tested ({phi}=0.64, 0.90, and 1.13, with nitrogen dilution to equalize the flame speeds (S{sub b}) in the absence of vortex interaction). Transient stretch rates were varied using three different vortex strengths, and the size of the flame kernel at the start of the vortex interaction controlled by time delay between ignition and vortex generation. Vortex interactions with small ({proportional_to}5 mm radius) flame kernels were found to increase burning rates for lean ({phi}=0.64) flame kernels substantially. Burning rates for rich ({phi}=1.13) flames were decreased, with total flame kernel extinction occurring in extreme cases. These small flame kernel-vortex interactions are dominated by transient stretch effects and thermodiffusive stability, in agreement with premixed flame theory. However, vortex interactions with larger methane-air flame kernels ({proportional_to}30 mm radius) led to slight flame speed enhancements for both lean and rich flame kernels, with the flame-vortex process dominated by increased flamefront area generated by vortex-induced flame wrinkling. (author)

33 ADVANCED PROPULSION SYSTEMS↗

Aggregate attack surface management for network discovery of operational technology

Interconnectivity has become a substratum of technology as the benefits of data-driven functionality are being realized in nearly all industries. Increased connectivity of Operational Technology (OT) exacerbates cyber risks because Industrial Control Systems (ICS) are becoming exposed to the Internet. These exposures are often done inadvertently through misconfigurations as additional network devices come online. Attack surface management (ASM) platforms can be used to identify vulnerabilities by performing external network discovery over the Internet using web spiders. These web spiders enable big data analytics of Internet of Things (IoT) devices as identifiable information of Internet-exposed equipment are archived in searchable databases that are made publicly available. There are a multitude of ASM service providers on the market. Here, this study was conducted to evaluate several commonly known tools to determine the aggregate attack surface of control systems. Queries were crafted by targeting commonly known manufacturers and communication protocols found in OT networks. Identified devices were that categorized based on technology types. Each query was replicated between several tools to target identical ICS equipment. Findings in this paper suggested a significant variance in the exposures discovered by each tool, but unique contributions were identified for each tool when a merged attack surface was derived. Therefore, all tools should be used in aggregate.

97 MATHEMATICS AND COMPUTING↗

Design, synthesis and biological evaluations of N-Hydroxy thienopyrimidine-2,4-diones as inhibitors of HIV reverse transcriptase-associated RNase H

Human immunodeficiency virus (HIV) reverse transcriptase (RT) associated ribonuclease H (RNase H) is the only HIV enzymatic function not targeted by current antiviral drugs. Although various chemotypes have been reported to inhibit HIV RNase H, few have shown significant antiviral activities. We report herein the design, synthesis and biological evaluation of a novel N-hydroxy thienopyrimidine-2,3-dione chemotype (11) which potently and selectively inhibited RNase H with considerable potency against HIV-1 in cell culture. Current structure-activity-relationship (SAR) identified analogue 11d as a nanomolar inhibitor of RNase H (IC 50 = 0.04 μM) with decent antiviral potency (EC 50 = 7.4 μM) and no cytotoxicity (CC 50 > 100 μM). In extended biochemical assays compound 11d did not inhibit RT polymerase (pol) while inhibiting integrase strand transfer (INST) with 53 fold lower potency (IC 50 = 2.1 μM) than RNase H inhibition. Furthermore, crystallographic and molecular modeling studies confirmed the RNase H active site binding mode.

59 BASIC BIOLOGICAL SCIENCES↗

Design, synthesis and biological evaluation of a new series of thiazolyl-pyrazolines as dual EGFR and HER2 inhibitors

Epidermal growth factor receptor (EGFR, also known as HER1) and HER2, prominent members of receptor tyrosine kinase (RTK) superfamily, have been reported as diagnostic or prognostic markers in tumor progression. Based on the importance of molecular hybridization of pyrazoline and thiazole scaffolds in the discovery of potent anticancer agents, new thiazolyl-pyrazoline derivatives (3a-v) were synthesized and screened for their cytotoxic effects on A549 human lung adenocarcinoma, MCF-7 human breast adenocarcinoma and A375 human melanoma cell lines. 1-(4-(4-Fluorophenyl)thiazol-2-yl)-3-(4-morpholinophenyl)-5-(4-chlorophenyl)-2-pyrazoline (3c),1-(4-(4-cyanophenyl)thiazol-2-yl)-3-(4-morpholinophenyl)-5-(4-chlorophenyl)-2-pyrazoline (3f) and 1-(4-(4-cyanophenyl)thiazol-2-yl)-3-(4-piperidinophenyl)-5-(4-chlorophenyl)-2-pyrazoline (3q) were found as the most potent anticancer agents against A549 and MCF-7 cell lines compared to erlotinib. Compound 3q also showed moderate cytotoxic activity against A375 cell line. Moreover, these compounds exert a cancer cell–selective action against Jurkat cell line posing no toxicity on peripheral blood mononuclear cells (PBMCs). In order to enlighten the mechanism of action underlying anticancer activity, compounds 3c, 3f and 3q were investigated for their apoptotic effects on A549 and MCF-7 cell lines and inhibitory potencies against eight different RTKs including EGFR and HER2 compared to erlotinib. The results indicated that compounds 3f and 3q induced apoptosis in both cell lines and showed significant EGFR inhibitory activity with IC50 values of 4.34 ± 0.66 μM and 4.71 ± 0.84 μM, respectively when compared with erlotinib (IC 50 = 0.05 ± 0.01 μM). Besides, compound 3f also inhibited HER2 notably with an IC 50 value of 2.28 ± 0.53 μM making it a dual EGFR and HER2 inhibitor. Molecular docking studies, which were conducted to support the in vitro assays, pointed out that compound 3f showed high affinity into the ATP binding sites of EGFR and HER2.

60 APPLIED LIFE SCIENCES↗

A multi-pronged evaluation of aldehyde-based tripeptidyl main protease inhibitors as SARS-CoV-2 antivirals

As an essential enzyme of SARS-CoV-2, the COVID-19 pathogen, main protease (M Pro ) is a viable target to develop antivirals for the treatment of COVID-19. By varying chemical compositions at both P2 and P3 positions and the N-terminal protection group, we synthesized 18 tripeptidyl M Pro inhibitors that contained also an aldehyde warhead and β-(S-2-oxopyrrolidin-3-yl)-alaninal at the P1 position. Systematic characterizations of these inhibitors were conducted, including their in vitro enzymatic inhibition potency, X-ray crystal structures of their complexes with M Pro , their inhibition of M Pro transiently expressed in 293T cells, and cellular toxicity and SARS-CoV-2 antiviral potency of selected inhibitors. These inhibitors have a large variation of determined in vitro enzymatic inhibition IC 50 values that range from 4.8 to 650 nM. Here, the determined in vitro enzymatic inhibition IC 50 values reveal that relatively small side chains at both P2 and P3 positions are favorable for achieving high in vitro M Pro inhibition potency, the P3 position is tolerable toward unnatural amino acids with two alkyl substituents on the α-carbon, and the inhibition potency is sensitive toward the N-terminal protection group. X-ray crystal structures of M Pro bound with 16 inhibitors were determined. In all structures, the M Pro active site cysteine interacts covalently with the aldehyde warhead of the bound inhibitor to form a hemithioacetal that takes an S configuration. For all inhibitors, election density around the N-terminal protection group is weak indicating possible flexible binding of this group to M Pro . In M Pro , large structural variations were observed on residues N142 and Q189. Unlike their high in vitro enzymatic inhibition potency, most inhibitors showed low potency to inhibit M Pro that was transiently expressed in 293T cells. Inhibitors that showed high potency to inhibit M Pro transiently expressed in 293T cells all contain O-tert-butyl-threonine at the P3 position. These inhibitors also exhibited relatively low cytotoxicity and high antiviral potency. Overall, our current and previous studies indicate that O-tert-butyl-threonine at the P3 site is a key component to achieve high cellular and antiviral potency for tripeptidyl aldehyde inhibitors of M Pro .

60 APPLIED LIFE SCIENCES↗

Nanomechanical investigation of the interplay between pore morphology and crack orientation of amorphous silica

Porous amorphous silica (a-SiO 2 ) is of both fundamental and practical interests, as they exhibit a large specific surface area and tunable porous network. However, the brittle nature of a-SiO 2 and the presence of pre-existing cracks at both micro- and nano-scales lead to complex mechanical behavior. Here, we systematically investigate the effects of pre-existing crack and its orientation on the mechanical properties of a-SiO 2 with varying pore shapes using reactive molecular dynamics simulations. We demonstrate that pore shape will primarily influence the Young’s modulus (E) and critical energy release rate (G IC ). We further investigate the impact of pore shape and crack orientation by local characterization of the structural parameters. By defining the high stress and inter-mediate regions, the overall mechanical properties are found to be greatly influenced by the pore shape which can be reflected through the spatial distribution of von Mises stress. Overall, G IC is found to increase with the increase of ligament length (also known as pore wall thickness). Meanwhile, the effect of the pre-existing crack on the crack propagation process is confirmed by analyzing the density distribution evolution. These results highlight the interplay between pore morphology and crack orientation in controlling the fracture behaviors in brittle porous materials.

42 ENGINEERING↗

JTAG-based PLC memory acquisition framework for industrial control systems

In industrial control systems (ICS), programmable logic controllers (PLC) are the embedded devices that directly control and monitor critical industrial infrastructure processes such as nuclear plants and power grid stations. Cyberattacks often target PLCs to sabotage a physical process. A memory forensic analysis of a suspect PLC can answer questions about an attack, including compromised firmware and manipulation of PLC control logic code and I/O devices. Given physical access to a PLC, collecting forensic information from the PLC memory at the hardware-level is risky and challenging. It may cause the PLC to crash or hang since PLCs have proprietary, legacy hardware with heterogeneous architecture. This paper addresses this research problem and proposes a novel JTAG (Joint Test Action Group)-based framework, Kyros, for reliable PLC memory acquisition. Kyros systematically creates a JTAG profile of a PLC through hardware assessment, JTAG pins identification, memory map creation, and optimizing acquisition parameters. It also facilitates the community of interest (such as ICS owners, operators, and vendors) to develop the JTAG profiles of PLCs. Further, we present a case study of Kyros implementation over Allen-Bradley 1756-A10/B to help understand the framework's application on a real-world PLC used in industry settings. The sample PLC memory dumps are shared with the research community to facilitate further research.

Rais, Muhammad Haris↗

A Treatment Planning Comparison of Combined Photon-Proton Beams Versus Proton Beams-Only for the Treatment of Skull Base Tumors

Purpose: To compare treatment planning between combined photon-proton planning (CP) and proton planning (PP) for skull base tumors, so as to assess the potential limitations of CP for these tumors. Methods and Materials: Plans for 10 patients were computed for both CP and PP. Prescribed dose was 67 cobalt Gray equivalent (CGE) for PP; 45 Gy (photons) and 22 CGE (protons) for CP. Dose-volume histograms (DVHs) were calculated for gross target volume (GTV), clinical target volume (CTV), normal tissues (NT), and organs at risk (OARs) for each plan. Results were analyzed using DVH parameters, inhomogeneity coefficient (IC), and conformity index (CI). Results: Mean doses delivered to the GTVs and CTVs with CP (65.0 and 61.7 CGE) and PP (65.3 and 62.2 Gy CGE) were not significantly different (p > 0.1 and p = 0.72). However, the dose inhomogeneity was drastically increased with CP, with a mean significant incremental IC value of 10.5% and CP of 6.8%, for both the GTV (p = 0.01) and CTV (p = 0.04), respectively. The CI{sub 80%} values for the GTV and CTV were significantly higher with PP compared with CP. Compared with CP, the use of protons only led to a significant reduction of NT and OAR irradiation, in the intermediate-to-low dose ({<=}80% isodose line) range. Conclusions: These results suggest that the use of CP results in levels of target dose conformation similar to those with PP. Use of PP significantly reduced the tumor dose inhomogeneity and the delivered intermediate-to-low dose to NT and OARs, leading us to conclude that this treatment is mainly appropriate for tumors in children.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Hearing Outcomes After Stereotactic Radiosurgery for Unilateral Intracanalicular Vestibular Schwannomas: Implication of Transient Volume Expansion

Purpose: We evaluated the prognostic factors for hearing outcomes after stereotactic radiosurgery (SRS) for unilateral sporadic intracanalicular vestibular schwannomas (IC-VSs) as a clinical homogeneous group of VSs. Methods and Materials: Sixty consecutive patients with unilateral sporadic IC-VSs, defined as tumors in the internal acoustic canal, and serviceable hearing (Gardner-Roberson grade 1 or 2) were treated with SRS as an initial treatment. The mean tumor volume was 0.34 {+-} 0.03 cm{sup 3} (range, 0.03-1.00 cm{sup 3}), and the mean marginal dose was 12.2 {+-} 0.1 Gy (range, 11.5-13.0 Gy). The median follow-up duration was 62 months (range, 36-141 months). Results: The actuarial rates of serviceable hearing preservation were 70%, 63%, and 55% at 1, 2, and 5 years after SRS, respectively. In multivariate analysis, transient volume expansion of {>=}20% from initial tumor size was a statistically significant risk factor for loss of serviceable hearing and hearing deterioration (increase of pure tone average {>=}20 dB) (odds ratio = 7.638; 95% confidence interval, 2.317-25.181; P=.001 and odds ratio = 3.507; 95% confidence interval, 1.228-10.018; P=.019, respectively). The cochlear radiation dose did not reach statistical significance. Conclusions: Transient volume expansion after SRS for VSs seems to be correlated with hearing deterioration when defined properly in a clinically homogeneous group of patients.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Role of Adjuvant Radiation Therapy After Surgery for Abdominal Desmoplastic Small Round Cell Tumors

Purpose: To identify the prognostic role of adjuvant abdominal radiation therapy (RT) on oncologic outcomes as a part of multimodal treatment in the management of desmoplastic small round cell tumor (DSRCT) and to determine its impact according to the quality of surgical resection. Methods and Materials: All patients treated for primary abdominal DSRCT in 8 French centers from 1991 to 2014 were included. Patients were retrospectively staged into 3 groups: group A treated with adjuvant RT after cytoreductive surgery, group B without RT after cytoreductive surgery, and group C by exclusive chemotherapy. Peritoneal progression-free survival (PPFS), progression-free survival (PFS), and overall survival (OS) were evaluated. We also performed a direct comparison between groups A and B to evaluate RT after cytoreductive surgery. Radiation therapy was also evaluated according to completeness of surgery: complete cytoreductive surgery (CCS) or incomplete cytoreductive surgery (ICS). Results: Thirty-seven (35.9%), thirty-six (34.9%), and thirty (28.0%) patients were included in groups A, B, and C, respectively. Three-year OS was 61.2% (range, 41.0%-76.0%), 37.6% (22.0%-53.1%), and 17.3% (6.3%-32.8%) for groups A, B, and C, respectively. Overall survival, PPFS, and PFS differed significantly among the 3 groups (P<.001, P<.001, and P<.001, respectively). Overall survival and PPFS were higher in group A (RT group) compared with group B (no RT group) (P=.045 and P=.006, respectively). Three-year PPFS was 23.8% (10.3%-40.4%) for group A and 12.51% (4.0%-26.2%) for group B. After CCS, RT improved PPFS (P=.024), but differences in OS and PFS were not significant (P=.40 and P=.30, respectively). After ICS, RT improved OS (P=.044). A trend of PPFS and PFS increase was observed, but the difference was not statistically significant (P=.073 and P=.076). Conclusions: Adjuvant RT as part of multimodal treatment seems to confer oncologic benefits for patients treated for abdominal DSRCT after cytoreductive surgery and perioperative chemotherapy.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Fracture toughness measurement of ceramics with fuel pellet geometry

The crack initiation of nuclear fuel pellets, driven by extreme temperature gradients, is a critical factor impacting reactor performance. Although this fact is widely acknowledged, there is limited fracture toughness data for specimens with representative geometry and fabricated using relevant processing methods. Here, to address this, a new chevron-notched short-rod specimen configuration with diameter and length both equal to 10 mm, representative of a conventional fuel pellet and tested in tension, was developed in an attempt to validly measure Mode I fracture toughness, K Ic . Test calibration was carried out by testing polycrystalline ZrO 2 , SiC, and Si 3 N 4 ceramics fabricated with conventional fuel pellet geometry and known fracture toughnesses. The results suggest that the method described in this paper produces valid K Ic measurements using conventional ceramic fuel pellets.

Ceramics↗

Investigation on capacity loss mechanisms of lithium-ion pouch cells under mechanical indentation conditions

Capacity loss was observed in Li-ion cells after mechanical deformation approaching the onset of internal short circuit (ISCr). In this paper, a series of indentation tests were carried out on commercial Li-ion cells of three capacities (500, 1500 and 2000 mAh). Both in-situ and ex-situ methods were used to investigate the mechanisms of indentation-induced capacity loss. We note after indentation test, the cell capacity reduced by 0.5%–6% of its original value. The incremental capacity (IC) analysis results showed that IC curves generally shifted to lower voltage region, indicating the increase in cell internal resistance. In addition, the fitting results of electrochemical impedance spectroscopy (EIS) indicated that mechanical indentation can result in a reduction in ohmic resistance and the increase in polarization resistance. Scanning electron microscopy (SEM) and X-ray computed tomography (XCT) results showed crushing of graphite, mud cracking of copper current collectors and enlarged pores in separator, which is proposed to be the main reasons for the increase in polarization resistance and permanent capacity loss. The rapid capacity loss due to mechanical abuse was compared with the long-term capacity fading.

25 ENERGY STORAGE↗

Synthesis of murdochite-type Ni{sub 6}MnO{sub 8} with variable specific surface areas and the application in methane oxidation

To synthesize a murdochite-type Ni{sub 6}MnO{sub 8} with variable specific surface areas, an oxalate precursor was calcined at 350–500 °C in flowing argon, and the calcined sample was heated to 600 °C in air. The lattice constant of the Ni{sub 6}MnO{sub 8} did not depend on the calcination temperature of the precursor, while the specific surface area decreased from 8.4 m{sup 2}/g to 2.6 m{sup 2}/g when increasing the calcination temperature of the precursor. The methane (CH{sub 4}) oxidation data indicated that the temperature corresponding to the 50% conversion (T{sub 50%}) of Ni{sub 6}MnO{sub 8} calcined at 350 °C or 400 °C was lower than that of all other Ni{sub 6}MnO{sub 8} specimens. However, the intrinsic conversion of Ni{sub 6}MnO{sub 8} calcined at 350 °C, which is defined as conversion per specific surface area, was half of that of all other Ni{sub 6}MnO{sub 8} specimens. The degree of crystallinity and catalytic performance of the Ni{sub 6}MnO{sub 8} calcined at 400 °C were high. - Graphical abstract: The conversion of CH{sub 4} into CO{sub 2} and H{sub 2}O on Ni{sub 6}MnO{sub 8}, which was heated at 600 °C in air after the calcination of the precursor at 350 °C, 400 °C, 450 °C, or 500 °C in flowing argon, was measured. Since the specific surface area was strongly affected by the calcination temperature of the precursor, intrinsic conversion (IC) was defined as conversion per the specific surface area. For comparison, the IC value on Ni{sub 6}MnO{sub 8} synthesized by the direct calcination of the precursor at 600 °C in air is plotted. - Highlights: • The oxalate precursor was calcined at 350–500 °C in flowing argon. • Murdochite-type Ni{sub 6}MnO{sub 8} was obtained by heating the calcined sample in air. • The specific surface area of Ni{sub 6}MnO{sub 8} varied with the calcination temperature. • The degree of crystallinity and catalysis of Ni{sub 6}MnO{sub 8} calcined at 400 °C were high.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cytotoxic and antioxidant activity of the biogenic bismuth nanoparticles produced by Delftia sp. SFG

Highlights: • A bismuth nanoparticle (Bi NPs) producer bacterium, Delftia sp. SFG, was screened. • The Bi NPs was purified by a three phase partitioning system and characterized. • Cytotoxicity and antioxidant activity of biogenic Bi NPs were determined. - Abstract: In the present investigation a bismuth nanoparticles (Bi NPs) producing bacterial strain (designated as Delftia sp. SFG) was isolated from salt marsh and the biogenic Bi NPs was purified, characterized, and their cytotoxic and antioxidant activities were determined. The spherical shaped Bi NPs was inspected by transmission electron microscopy (TEM), scanning electron microscopy (SEM) equipped with energy dispersive X-ray (EDX) microanalyzer, and X-ray diffraction spectroscopy (XRD) method. Furthermore, the related size distribution pattern (20–120 nm), UV–vis and Fourier transform infrared (FTIR) spectrums of the produced Bi NPs were determined. The attained results of cytotoxic effect (determined by MTT-based colorimetric assay) of the purified Bi NPs revealed IC{sub 50} of 10.9 ± 0.9 μg mL{sup −1}, 35.4 ± 0.5 μg mL{sup −1}, and 42.8 ± 1.7 μg mL{sup −1} against A549, MCF-7, and 3T3 cell lines. Determination of antioxidant activity showed IC{sub 50} values of 123.1 μg mL{sup −1} and 307.2 μg mL{sup −1} for butylated hydroxyanisole (BHA) and Bi NPs, respectively.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Compact FEL-driven inverse compton scattering gamma-ray source

Many research and applications areas require photon sources capable of producing gamma-ray beams in the multi-MeV energy range with reasonably high fluxes and compact footprints. Besides industrial, nuclear physics and security applications, a considerable interest comes from the possibility to assess the state of conservation of cultural assets like statues, columns etc., via visualization and analysis techniques using high energy photon beams. Computed Tomography scans, widely adopted in medicine at lower photon energies, presently provide high quality three-dimensional imaging in industry and museums. We explore the feasibility of a compact source of quasi-monochromatic, multi-MeV gamma-rays based on Inverse Compton Scattering (ICS) from a high intensity ultra-violet (UV) beam generated in a free-electron laser by the electron beam itself. This scheme introduces a stronger relationship between the energy of the scattered photons and that of the electron beam, resulting in a device much more compact than a classic ICS for a given scattered energy. As a result, the same electron beam is used to produce gamma-rays in the 10–20 MeV range and UV radiation in the 10–15 eV range, in a ~4 × 22 m 2 footprint system.

43 PARTICLE ACCELERATORS↗

Shale-fluid interactions during forced lmbibition and flow-back

One way to minimize the need for disposal of flow-back waters produced during the hydraulic fracturing of unconventional reservoirs is, potentially, to recycle these fluids by recovering and re-injecting them during hydraulic fracturing of nearby new wells. These flow-back waters contain, however, large concentrations of dissolved salts. During hydraulic fracturing of unconventional reservoirs, a well may undergo extended shut-in periods, following the initial hydraulic-fracture stimulation. The concern here, therefore, is that the salts dissolved in the re-injected flow-back waters may precipitate in the subsurface, thus promoting scale formation; or alternately, because of their high salinity, these same fluids may cause the dissolution of various minerals present in the subsurface. Large divalent cations (e.g., Ca²⁺, Ba²⁺ and Sr²⁺) and anions (e.g., CO3²⁻ and SO4²) may chemically interact with and cause the swelling of clay fractions, thus blocking pores in certain pore size ranges. All these phenomena (i.e., scale formation, clay swelling, minerals dissolution) can influence the petrophysical properties of the formation, including its permeability, porosity, contact angle, etc. One way to potentially overcome some of these technical challenges, is to pre-treat these flow-back waters, prior to re-injection (e.g., via chemical precipitation, followed by membrane filtration) in order to remove unwanted salts. However, such pre-treatment is costly, and the degree of salt removal needed to prevent formation damage is important in determining the economic viability of flow-back water recycle via re-injection. A key focus of this work, therefore, is to study the impact that the injection of flow-back waters, that have undergone varying degrees of pre-treatment and clean-up, will have on the flow-through characteristics of a tight-gas reservoir, particularly of the Marcellus Shale formation. To do so, we have carried-out forced-imbibition experiments with shale samples from various depths in the Marcellus formation, whose properties span high to low ranges of TOC, clay content and matrix permeabilities. We have studied the forced-imbibition characteristics, at an injection pressure of 24,233 kPa (3500 psig), of various flow-back fluids into shale cores saturated with methane at a pore pressure of 17,338 kPa (2500 psig) and a confining stress of 27,680 kPa (4000 psig). Following the forced imbibition experiments, we analyzed the cores for potential changes in permeability and porosity. Quantification of the ion content of the injected and recovered fluids was also performed using Ion Chromatography (IC). The IC analysis of the recovered fluids indicates substantial interactions and geochemical reactions between the invading fluids and the shale cores. The injection of flow-back fluids shows significant impact on the flow-through characteristics, with untreated flow-back fluids, which have the highest cation and anion content, also exhibiting the highest observable reductions in permeability (>90%).

defects, mechanical behavior, carbon sequestration↗