Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HOLE MOBILITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Efficient Photoinduced Charge Injection from Chemical-Bath Deposited CdS into Mesoporous TiO2 Probed with Time-Resolved Microwave Conductivity

We use the contactless time-resolved microwave conductivity (TRMC) technique to investigate the photoconductance of CdS-coated mesoporous TiO2 and ZrO2. The CdS domains were grown directly on the surface of the oxide by a chemical bath deposition method. Mobile charge carriers are generated with a low yield following photoexcitation of CdS grown on ZrO2; there is no injection into the oxide and the short-lived photoconductance signal is attributed to the hole in CdS. In contrast, illumination of CdS domains grown on TiO2 results in very efficient electron injection into the TiO2 nanoparticles, producing long-lived charge carriers. We show that the quantum yield for electron injection into TiO2 per photon absorbed by the CdS sensitizer is close to unity. The photoconductance action spectrum follows the absorption of the CdS domains, which indicates that the charge injection efficiency does not depend on wavelength in the range where the CdS absorbs (425-550 nm).

absorption↗

FOB-SH: Fragment orbital-based surface hopping for charge carrier transport in organic and biological molecules and materials

We introduce a fragment orbital-based fewest switches surface hopping method, FOB-SH, designed to efficiently simulate charge carrier transport in strongly fluctuating condensed phase systems such as organic semiconductors and biomolecules. The charge carrier wavefunction is expanded and the electronic Hamiltonian constructed in a set of singly occupied molecular orbitals of the molecular sites that mediate the charge transfer. Diagonal elements of the electronic Hamiltonian (site energies) are obtained from a force field, whereas the off-diagonal or electronic coupling matrix elements are obtained using our recently developed analytic overlap method. We derive a general expression for the exact forces on the adiabatic ground and excited electronic state surfaces from the nuclear gradients of the charge localized electronic states. Applications to electron hole transfer in a model ethylene dimer and through a chain of ten model ethylenes validate our implementation and demonstrate its computational efficiency. On the larger system, we calculate the qualitative behaviour of charge mobility with change in temperature T for different regimes of the intermolecular electronic coupling. For small couplings, FOB-SH predicts a crossover from a thermally activated regime at low temperatures to a band-like transport regime at higher temperatures. For higher electronic couplings, the thermally activated regime disappears and the mobility decreases according to a power law. This is interpreted by a gradual loss in probability for resonance between the sites as the temperature increases. The polaron hopping model solved for the same system gives a qualitatively different result and underestimates the mobility decay at higher temperatures. Taken together, the FOB-SH methodology introduced here shows promise for a realistic investigation of charge carrier transport in complex organic, aqueous, and biological systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Low Pressure Gas Effects On The Potency Of An Electron Beam On Ceramic Fabric Materials For Space Welding

This investigation was undertaken to evaluate if molten metal or electron beam impingement could damage or burn through the fabric of the astronauts Extravehicular Mobility Unit (EMU) during electron beam welding exercises performed in space. An 8 kilovolt electron beam with a current in the neighborhood of 100 milliamps from the Ukrainian space welding "Universal Hand Tool" burned holes in Nextel AF-62 ceramic cloth designed to withstand temperatures up to 1427 C. The burnthrough time was on the order of 8 seconds at standoff distances between UHT and cloth ranging from 6 to 24 inches. At both closer (2") and farther (48") standoff distances the potency of the beam against the cloth declined and the burnthrough time went up significantly. Prior to the test it had been expected that the beam would lay down a static charge on the cloth and be deflected without damaging the cloth. The burnthrough is thought to be an effect of partial transmission of beam power by a stream of positive ions generated by the high voltage electron beam from contaminant gas in the "vacuum" chamber. A rough quantitative theoretical computation appears to substantiate this possibility.

Nunes, Arthur C., Jr.↗

Investigations of radiation-induced and carrier-enhanced conductivity

A steady-state carrier computer code, PECK (Parker Enhanced Carrier Kinetics), that predicts the radiation-induced conductivity (RIC) produced in a dielectric by an electron beam was developed. The model, which assumes instantly-trapped holes, was then applied to experimental measurements on thin Kapton samples penetrated by an electron beam. Measurements at high bias were matched in the model by an appropriate choice for the trap-modulated electron mobility. A fractional split between front and rear currents measured at zone bias is explained on the basis of beam-scattering. The effects of carrier-enhanced conductivity (CEC) on data obtained for thick, free-surface Kapton samples is described by using an analytical model that incorporates field injection of carriers from the RIC region. The computer code, LWPCHARGE, modified for carrier transport, is also used to predict partial penetration effects associated with CEC in the unirradiated region. Experimental currents and surface voltages, when incorporated in the appropriate models, provide a value for the trap modulated mobility that is in essential agreement with the RIC results.

Meulenberg, A., Jr.↗

A transport-based model of material trends in nonproportionality of scintillators

Electron-hole pairs created by the passage of a high-energy electron in a scintillator radiation detector find themselves in a very high radial concentration gradient of the primary electron track. Since nonlinear quenching that is generally regarded to be at the root of nonproportional response depends on the fourth or sixth power of the track radius in a cylindrical track model, radial diffusion of charge carriers and excitons on the {approx}10 picosecond duration typical of nonlinear quenching can compete with and thereby modify that quenching. We use a numerical model of transport and nonlinear quenching to examine trends affecting local light yield versus excitation density as a function of charge carrier and exciton diffusion coefficients. Four trends are found: (1) nonlinear quenching associated with the universal 'roll-off' of local light yield versus dE/dx is a function of the lesser of mobilities {mu}{sub e} and {mu}{sub h} or of D{sub EXC} as appropriate, spanning a broad range of scintillators and semiconductor detectors; (2) when {mu}{sub e{approx_equal}{mu}h}, excitons dominate free carriers in transport, the corresponding reduction of scattering by charged defects and optical phonons increases diffusion out of the track in competition with nonlinear quenching, and a rise in proportionality is expected; (3) when {mu}{sub h} << {mu}{sub e} as in halide scintillators with hole self-trapping, the branching between free carriers and excitons varies strongly along the track, leading to a 'hump' in local light yield versus dE/dx; (4) anisotropic mobility can promote charge separation along orthogonal axes and leads to a characteristic shift of the 'hump' in halide local light yield. Trends 1 and 2 have been combined in a quantitative model of nonlinear local light yield which is predictive of empirical nonproportionality for a wide range of oxide and semiconductor radiation detector materials where band mass or mobility data are the determinative material parameters.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Defects in {sup 6}LiInSe{sub 2} neutron detector investigated by photo-induced current transient spectroscopy and photoluminescence

{sup 6}LiInSe{sub 2} is a promising thermal neutron semiconductor detector material. The performance of the detector is affected by the carrier mobility-lifetime products. Therefore, defects that function as carrier recombination centers need to be identified. In this letter, characterization of defect levels in {sup 6}LiInSe{sub 2} by photo-induced current transient spectroscopy (PICTS) and photoluminescence is reported. PICTS measurements revealed electron-related defects located at 0.22, 0.36, and 0.55 eV and hole-related defects at 0.19, 0.30, and 0.73 eV. Free exciton and donor-acceptor pairs (DAP) emissions were observed. The PICTS defect level values are consistent with those extracted from DAP transitions.

36 MATERIALS SCIENCE↗

Deciphering the effect of traps on electronic charge transport properties of methylammonium lead tribromide perovskite

Halide perovskites have undergone remarkable developments as highly efficient optoelectronic materials for a variety of applications. Several studies indicated the critical role of defects on the performance of perovskite devices. However, the parameters of defects and their interplay with free charge carriers remain unclear. In this study, we explored the dynamics of free holes in methylammonium lead tribromide (MAPbBr 3 ) single crystals using the time-of-flight (ToF) current spectroscopy. By combining ToF spectroscopy and Monte Carlo simulation, three energy states were detected in the bandgap of MAPbBr 3 . In addition, we found the trapping and detrapping rates of free holes ranging from a few microseconds to hundreds of microseconds. Contrary to previous studies, we revealed a strong detrapping activity of traps. We showed that these traps substantially affect the transport properties of MAPbBr 3 , including mobility and mobility-lifetime product. Our results provide an insight on charge transport properties of perovskite semiconductors.

36 MATERIALS SCIENCE↗

Crystallization and Thermoelectric Transport in Semiconductor Micro- and Nanostructures Under Extreme Conditions

This project focused on thermoelectric transport in semiconductor micro and nanostructures where moderate and typical operating voltages and currents lead to extreme thermal gradients and current densities. Models that describe behavior of semiconducting materials typically assume an equilibrium condition or slight deviations from it. In these cases the generation-recombination processes are assumed to have reached a local equilibrium for a given temperature. Hence, free carrier concentrations and their mobilities, band-gap, thermal conductivity, thermoelectric properties, mobility of atoms and mechanical properties of the material, can be described as a function of temperature. In the case of PN junctions under electrical bias, carrier concentrations can change up to ~ 1020 cm-3 and a drift-diffusion approximation is typically used to obtain the carrier concentrations while assuming that the material properties do not change. In non-equilibrium conditions, the assumption that the material properties remain the same may not be valid. While the increased conduction-band electron concentration may not have a drastic effect on the material, large hole concentration is expected to soften the material as ‘a hole’ comes into existence as a broken bond in the lattice. As the hole density approaches 1022 cm-3, the number of bonds holding the lattice together is significantly reduced, making it easier to break additional bonds, reduce band-gap and inhibit phonon transport. As these holes move away from where they were generated, local properties are expected to deviate significantly from the equilibrium case. Hence, temperature alone is not sufficient to describe the behavior of the material. The behavior of the solid material close to a molten region (liquid-solid interfaces) is also expected to deviate from the equilibrium case as a function of hole injection rate, which can be drastically increased or decreased in the presence of an electric field. In the past years we have investigated the possible thermoelectric explanation of asymmetric melting of self-heated Si micro-structures using equilibrium materials’ properties that exist in the literature. We have analyzed the contribution of the electrons and the holes and identified the generation-transport-recombination of minority carriers (GTR) as the reason for an extreme change in the thermal profile in presence of strong generation and electric field. A more complete analysis required construction of models that capture the individual generation and recombination processes to understand the thermal profile as well as the possibility of electronic softening and non-equilibrium melting of the structure below melting temperature. The possibility of melting a material at a lower temperature breaks the correlation between the atomic mobility and the kinetic energy in the system for a given temperature and may allow alternative growth processes. This may also be the mechanism behind ‘amorphization-without-melting in layered structures heated with laser pulses’ that has been reported earlier. The conventional models for semiconductors are constructed for low temperature operation and their projections to higher temperatures do not yield reasonable carrier concentrations. Using these models, the free hole concentrations are calculated to be on the order of 1019 cm-3 at melting, which also do not correlate well with the latent heat of fusion. The melt is expected to correspond to broken bond concentrations on the order of the atomic density (~5x1022 cm-3 for Silicon). Hence, using conventional models the thermoelectric contribution expected from the GTR process is estimated to be much smaller than it likely is. Our work focused on improving the computational models and electrical characterization of materials and devices to better understand thermoelectric trabsport under extremen thermal gradients and current densities. Specifically, during this project, we have - Expanded our computational models to include self-consistent solution of Poisson charge equation (together with current and heat equations currently solved) for improved accuracy of role of bipolar conduction, - Developed a crystallization model incorporating experimentally determined nucleation rates and growth velocities to enable simulation of grain growth, growth-from-melt, filament formation and retention, - Performed high-temperature characterization of relevant materials (including metal contacts, interfacial and insulation layers); electrical and thermal conductivities, Seebeck coefficient, carrier mobility and concentration, - Performed High-speed device-level characterization of metastable amorphous and crystalline phases, crystallization and amorphization dynamics, melting and crystalline growth-from-melt, - Observed and characterized formation of microplasmas in electrically stressed ZnO nanoforests.

36 MATERIALS SCIENCE↗

Electric field effect in ultrathin black phosphorus

Black phosphorus exhibits a layered structure similar to graphene, allowing mechanical exfoliation of ultrathin single crystals. Here, we demonstrate few-layer black phosphorus field effect devices on Si/SiO{sub 2} and measure charge carrier mobility in a four-probe configuration as well as drain current modulation in a two-point configuration. We find room-temperature mobilities of up to 300 cm{sup 2}/Vs and drain current modulation of over 10{sup 3}. At low temperatures, the on-off ratio exceeds 10{sup 5}, and the device exhibits both electron and hole conduction. Using atomic force microscopy, we observe significant surface roughening of thin black phosphorus crystals over the course of 1 h after exfoliation.

36 MATERIALS SCIENCE↗

Topographic Quintet: Comparing Five Methods for Measuring Ultra-High Resolution Topography

We compare different methods for collecting ultra-high resolution topography data within an analog planetary, human landing site scale area. Our aim is to investigate the cost and benefits of different 3D terrain mapping techniques, their associated data collection methods, and how their different specifications (e.g., range, spatial resolution, scanning-time, mobility, operating constraints, GPS-Denied operation, etc.) might be applied to landing-site characterization and mission operations. We compare 3D terrain data collected during a field campaign in November 2021 from an outcrop at Kilbourne Hole in southern New Mexico using different Light Detection and Ranging (LiDAR) sensors on the ground and stereo-derived 3D data from framing cameras mounted on small uncrewed aerial systems (sUAS).Our foci for this experiment are ground-based, surveying, and autonomous vehicle-type 3D scanning sensors that might be used for planetary surface exploration from landed assets (e.g., lander, rover, astronaut-mounted sensors, decent imaging, hoppers, or drones).[e.g. 1]This test is not meant to benchmark these scanners against one another, nor provide a recommendation for a specific make or model. Rather, our goal is to quantify time, effort, resolution, and operational trade-offs that are important for selecting a topographic instrument/methodology for a given scope of terrain characterization. Our results indicate that each technique is capable of exceptional quality terrain characterization for planetary exploration and scientific inquiry, but we hypothesize the appropriate technique is highly dependent on the scope of operational specifications and science requirements.

P Whelley↗

Ambipolar Phosphorene Field Effect Transistor

Two dimensional materials provide an intriguing platform to investigate rich physical phenomena which could ultimately lead to the development of innovative nanotechnologies (1-17). Semiconducting black phosphorous (BP) with high carrier mobility (18-20), anisotropic transport (21, 22) and tunable bandgap (23, 24) is the most recent addition to this exotic class of two dimensional materials. In this article we experimentally demonstrate room temperature quasi ballistic transport of both holes and electrons in ionic liquid gated black phosphorous (BP) field effect transistors (FET) with sub-100nm channel length. The carrier mean free path (mfp) was found to be 15nm for the holes and 5nm for the electrons. By improving the carrier injection through superior electrostatic gate control (EOT=1.5nm), highly symmetric ambipolar conduction with record high hole current of ~0.78mA/µm and electron current of ~0.68mA/µm are achieved for VDD=0.2V. The extracted record low contact resistance of 220Ω-µm is similar to the state of the art Si technology. This is also the best contact resistance value achieved for any two dimensional metal-semiconductor interfaces. Finally, we provide an analytical framework to compare the experimental results with ballistic simulations which includes quantum capacitance considerations.

Ballistic Transport↗

Conductivity-limiting bipolar thermal conductivity in semiconductors

Intriguing experimental results raised the question about the fundamental mechanisms governing the electron-hole coupling induced bipolar thermal conduction in semiconductors. Our combined theoretical analysis and experimental measurements show that in semiconductors bipolar thermal transport is in general a “conductivity-limiting” phenomenon and it is thus controlled by the carrier mobility ratio and by the minority carrier partial electrical conductivity for the intrinsic and extrinsic cases, respectively. Our numerical method quantifies the role of electronic band structure and carrier scattering mechanisms. We have successfully demonstrated bipolar thermal conductivity reduction in doped semiconductors via electronic band structure modulation and/or preferential minority carrier scatterings. We expect this study to be beneficial to the current interests in optimizing thermoelectric properties of narrow gap semiconductors.

36 MATERIALS SCIENCE↗

The augmented saddle field discharge characteristics and its applications for plasma enhanced chemical vapour deposition

A high ion flux parallel electrode plasma is proposed and studied in its DC configuration. By cascading a diode source region which supplies electrons and a saddle field region where these seed electrons are energized and amplified, the energy of ion bombardment on the substrate can be decoupled from the plasma density. The sufficiently large density of electrons and holes in the vicinity of the substrate raises the possibility to perform plasma enhanced chemical vapour deposition on insulating materials, at low sheath voltages (around 40 V in the configuration studied), at low temperatures in which the surface mobility of film growth species may be provided by the bombardment of moderate energy ions. As a benchmarking exercise, experiments are carried out on silane discharge characteristics and deposition of hydrogenated amorphous silicon (a-Si:H) on both silicon wafer and glass. The films grown at low anode voltages have excellent microstructures with predominantly monohydride bonds, sharp band tails, but relatively high integrated defect density in the mid 10{sup 16}/cm{sup 3} range for the particular substrate temperature of 180 Degree-Sign C, indicating that further optimizations are necessary if the electrode configuration is to be used to create a-Si:H devices.

36 MATERIALS SCIENCE↗

Thermoelectric properties of the Mg{sub 2}Ge{sub 0.3}Sn{sub 0.7} solid solution with p-type conductivity

The thermoelectric properties of the Mg{sub 2}Ge{sub 0.3}Sn{sub 0.7} solid solution doped with Ga and Li are studied. The samples with a hole concentration as high as 5 × 10{sup 20} cm{sup –3} are obtained. The temperature dependences of the thermopower, electrical conductivity, and thermal conductivity are measured in the range from room temperature to 800 K. A higher mobility of free charge carriers is observed in the samples doped with lithium than in the samples doped with gallium. The largest thermoelectric figure of merit in the samples under study amounts to 0.42 at 700 K.

36 MATERIALS SCIENCE↗

Emergence of composite many-body exciton states in WS 2 and MoSe 2 monolayers

When doped with a high density of mobile charge carriers, monolayer transition-metal dichalcogenide (TMD) semiconductors can host new types of composite many-particle exciton states that do not exist in conventional semiconductors. Further, such multiparticle bound states arise when a photoexcited electron-hole pair couples not to just a single Fermi sea that is quantum-mechanically distinguishable (as in the case of conventional charged excitons or trions), but rather couples simultaneously to multiple Fermi seas, each having distinct spin and valley quantum numbers. Composite six-particle “hexciton” states were recently identified in electron-doped $WSe$ $2$ monolayers, but under suitable conditions they should also form in all other members of the monolayer TMD family. Here we present spectroscopic evidence demonstrating the emergence of many-body hexcitons in charge-tunable $WS$ $2$ monolayers (at the A-exciton) and $MoSe$ $2$ monolayers (at the B-exciton). The roles of distinguishability and carrier screening on the stability of hexcitons are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Long-lived two-dimensional triplet magnetoexcitons in a Hall insulator

An experimental technique is developed to perform photoexcitation of an ensemble of translationinvariant triplet excitons, to manipulate this ensemble, and to detect the properties of its components. In particular, the influence of temperature on the radiationless decay during the relaxation of an exciton spin into the ground state of a Hall insulator at a filling factor ν = 2 is studied. The generation of photoexcited electrons and holes is controlled using photoinduced resonance reflection spectra, which makes it possible to estimate the density of light-generated electron–hole pairs and to independently control the self-consistent generation of electrons at the first Landau level and holes (vacancies) at the ground (zero) cyclotron electronic level. The existence of triplet excitons is established from inelastic light scattering spectra, which are used to determine the singlet–triplet exciton splitting. The lifetimes of triplet excitons, which are closely related to the relaxation time of an electron spin, are extremely long: they reach 100 μs in perfect GaAs/AlGaAs heterostructures with a high mobility of two-dimensional electrons at low temperatures. These long spin relaxation times are qualitatively explained, and the expected collective behavior of high-density triplet magnetoexcitons at sufficiently low temperatures, which is related to their Bose nature, is discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Highly Siderophile Elements as Tracers for the Subcontinental Mantle Evolution Beneath the Southwestern USA: The San Carlos and Kilbourne Hole Peridotite Xenoliths Revisited

Peridotite xenoliths from San Carlos, Arizona, and Kilbourne Hole, New Mexico, have been studied since the 1970 s to give insights into melting and metasomatism in the subcontinental mantle beneath the southwestern USA. More recently, the highly siderophile elements (HSE; Os, Ir, Ru, Rh, Pt, Pd, and Re) and the included Re-Os isotope system have been established as powerful tools for the study of mantle processes because of their range in compatibility during mantle melting and their siderophile and chalcophile geochemical behavior. Model aluminachron Re-Os ages for San Carlos and Kilbourne Hole, as well as for the nearby Dish Hill and Vulcan's Throne sites, give consistent depletion ages of around 2.2 Ga. This age can be interpreted as a single large scale mantle melting event linked to crustal formation and continental growth under the southwestern USA. Highly siderophile elements, however, may be added to depleted peridotites via melt-rock interaction, especially the more incompatible and hence mobile Pt, Pd, and Re. This may result in overprinting of the signature of melt extraction, thus abating the usefulness of Re-Os mantle extraction model ages. A comprehensive characterization of the suite of mantle xenoliths from the SW USA in terms of HSE concentrations is thus necessary to re-assess the Re-Os system for dating purposes. San Carlos peridotites are depleted to moderately fertile, as indicated by their bulk Al2O3 contents between 0.66 wt% and 3.13 wt%. Bulk Os-187/Os-188 in San Carlos peridotites range from 0.1206 to 0.1357. In contrast, Kilbourne Hole peridotites tend to be more fertile with Al2O3 between 2.11 and 3.78 wt%, excluding one extremely depleted sample with 0.30 wt% Al2O3, and have Os-187/Os-188 between 0.1156 and 0.1272, typical for mantle peridotites. No large fractionation between the more compatible HSE Os, Ir, and Ru are observed. The more incompatible HSE Re, Pd, and to a minor extent, Pt, however, are depleted in a number of samples by factors of up to 4 for Pt, 6 for Pd, and 20 for Re, compared to primitive mantle estimates. This is in agreement with previous studies from the same locales, which demonstrated the presence of different populations of mantle xenoliths having undergone various degrees of melt extraction. The depletion of the more incompatible elements (Re, Pd, and Pt) also suggests that the HSE budgets of the SW USA peridotites were primarily established by extraction of basaltic melt, and reflect only minor influence from later episodes of metasomatism. Model Re-Os ages obtained from San Carlos and Kilbourne Hole xenoliths may thus reflect ages of crustal formation and mantle depletion in the SW USA region.

vanAcken, D.↗

Influence of the rare-earth element on the effects of the structural and magnetic phase transitions in CeFeAsO, PrFeAsO, and NdFeAsO

We present results of transport and magnetic properties and heat capacity measurements on polycrystalline CeFeAsO, PrFeAsO and NdFeAsO. These materials undergo structural phase transitions, spin density wave-like magnetic ordering of small moments on iron and antiferromagnetic ordering of rare-earth moments. The temperature dependence of the electrical resistivity, Seebeck coefficient, thermal conductivity, Hall coefficient and magnetoresistance are reported. The magnetic behavior of the materials have been investigated using Moessbauer spectroscopy and magnetization measurements. Transport and magnetic properties are affected strongly by the structural and magnetic transitions, suggesting significant changes in the band structure and/or carrier mobilities occur, and phonon-phonon scattering is reduced upon transformation to the low-temperature structure. Results are compared with recent reports for LaFeAsO, and systematic variations in properties as the identity of Ln is changed are observed and discussed. As Ln progresses across the rare-earth series from La to Nd, an increase in the hole contributions to the Seebeck coefficient and increases in magnetoresistance and the Hall coefficient are observed in the low-temperature phase. Analysis of hyperfine fields at the iron nuclei determined from Moessbauer spectra indicates that the moment on Fe in the orthorhombic phase is nearly independent of the identity of Ln, in apparent contrast to reports of powder neutron diffraction refinements.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗