Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HAIR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Landsat 9: Mission Status and Prelaunch Instrument Performance Characterization and Calibration

Landsat 9 is currently under development as a joint effort between NASA and the United States Geological Survey (USGS). Landsat 9 is essentially a rebuild of Landsat 8 and has the same two sensors, the Operational Land Imager (OLI) and the Thermal Imaging Sensor (TIRS). The OLI-2 on Landsat 9, is being built by Ball Aerospace and has completed its pre-launch characterization and calibration and is scheduled to be delivered in the summer of 2019. The TIRS-2, being built by Goddard Space Flight Center, is currently undergoing testing through Spring 2019 and also scheduled for summer 2019 delivery. Several improvements to the characterization of both instruments have been incorporated into the testing plan, including improved spectral and radiometric characterization. The instruments will then be integrated onto the spacecraft being built by Northrop Grumman Innovation Systems (NGIS). The mission is targeted to launch as early as December 2020 on an Atlas-5.

Markham, Brian↗

GOES-16 ABI Solar Reflective Channel Validation for Earth Science Application

This paper presents the validation results of GOES-16 Satellite's Advanced Baseline Imager (ABI) obtained from a reflectance-based field campaign undertaken at the Salar de Uyuni in Bolivia in June 2017. In situ ground measurements are used to characterize the surface reflectance and the atmosphere in order to constrain the radiative transfer code and predict at-sensor reflectance (also referred to as top-of-atmosphere (TOA) reflectance) to compare with concurrent GOES-16 ABI measurements. The five-day field campaign provided repeated TOA reflectance estimates, allowing assessment not only of the calibration accuracy of the ABI reflective channels 1, 2, 3, 5 and 6, but also of its stability over the duration of the campaign. The results show that the accuracy of the ABI reflective channels calibration is within specification for channels 1, 3, 5, and 6 - average biases within 2%; for channel 2 the bias is 5%. The estimated uncertainty on the derived biases is 2–2.4%. Some calibration stability issues were present in the ABI calibration at the time of the campaign: (i) a jump on the order of 2% in channels 1 and 6, coincident with an ABI solar calibration event, reflects an instability of the ABI gains in these channels, and (ii) short-term variability in channels 1 and 2 is due to striping (ABI detector-todetector calibration differences). Continued validation and subsequent reprocessing of ABI reflectance imagery would allow Earth scientists to fully benefit from the high spatial and spectral fidelity of the GOES-16 ABI diurnal measurements at the continental scale.

Joel McCorkel↗

Aerosol Retrievals from Different Polarimeters During the ACEPOL Campaign Using a Common Retrieval Algorithm

In this paper, we present aerosol retrieval results from the ACEPOL (Aerosol Characterization from Polarimeter and Lidar) campaign, which was a joint initiative between NASA and SRON – the Netherlands Institute for Space Research. The campaign took place in October–November 2017 over the western part of the United States. During ACEPOL six different instruments were deployed on the NASA ER-2 high-altitude aircraft, including four multi-angle polarimeters (MAPs): SPEX airborne, the Airborne Hyper Angular Rainbow Polarimeter (AirHARP), the Airborne Multi-angle SpectroPolarimetric Imager (AirMSPI), and the Research Scanning Polarimeter (RSP). Also, two lidars participated: the High Spectral Resolution Lidar-2 (HSRL-2) and the Cloud Physics Lidar (CPL). Flights were conducted mainly for scenes with low aerosol load over land, but some cases with higher AOD were also observed. We perform aerosol retrievals from SPEX airborne, RSP (410–865 nm range only), and AirMSPI using the SRON aerosol retrieval algorithm and compare the results against AERONET (AErosol RObotic NETwork) and HSRL-2 measurements (for SPEX airborne and RSP). All three MAPs compare well against AERONET for the aerosol optical depth (AOD), with a mean absolute error (MAE) between 0.014 and 0.024 at 440 nm. For the fine-mode effective radius the MAE ranges between 0.021 and 0.028 µm. For the comparison with HSRL-2 we focus on a day with low AOD (0.02–0.14 at 532 nm) over the California Central Valley, Arizona, and Nevada (26 October) as well as a flight with high AOD (including measurements with AOD>1.0 at 532 nm) over a prescribed forest fire in Arizona (9 November). For the day with low AOD the MAEs in AOD (at 532 nm) with HSRL-2 are 0.014 and 0.022 for SPEX and RSP, respectively, showing the capability of MAPs to provide accurate AOD retrievals for the challenging case of low AOD over land. For the retrievals over the smoke plume a reasonable agreement in AOD between the MAPs and HSRL-2 was also found (MAE 0.088 and 0.079 for SPEX and RSP, respectively), despite the fact that the comparison is hampered by large spatial variability in AOD throughout the smoke plume. A good comparison is also found between the MAPs and HSRL-2 for the aerosol depolarization ratio (a measure of particle sphericity), with an MAE of 0.023 and 0.016 for SPEX and RSP, respectively. Finally, SPEX and RSP agree very well for the retrieved microphysical and optical properties of the smoke plume.

Fu, Guangliang↗

A13H-2537: Above Cloud Aerosol Optical Properties in the South East Atlantic from airborne observations during ORACLES

Aerosol overlying marine stratocumulus clouds is a persistent feature in the southeast Atlantic during the biomass burning season, July through November. We sampled aerosol and cloud from an airborne research platform, the NASA P3, during the deployments of ObseRvations of CLouds above Aerosols and their intEractionS (ORACLES) encompassing the peak biomass burning season. We used the Spectrometer for Sky-Scanning, Sun-Tracking Atmospheric Research (4STAR) to quantify the aerosol’s optical properties, notably the aerosol optical depth (AOD) by directly measuring the amount of light attenuation. We present an overview of very recent AOD measurements and contrast those to previous deployments. We observed an average AOD at 500 nm of 0.33 (0.30) in September 2016 (August 2017), with similar spatial dependence as observed by the MODIS instrument on board the TERRA and AQUA satellites. We also show full spectral vertical dependence of AOD from flight profiles, which compares favorably to the integrated aerosol extinction profile obtained by the active remote sensing High Spectral Resolution Lidar-2 (HSRL-2). We also present a quantification of the gap extent separating cloud top and aerosol layer bottom. Using hyperspectral transmitted light measurements from 4STAR, in conjunction with hyperspectral hemispheric irradiance measurements from the Solar Spectral Flux Radiometers (SSFR), we retrieved aerosol intensive properties (asymmetry parameter, single scattering albedo), aerosol size distributions, cloud optical depth (COD), cloud particle effective radius, and cloud thermodynamic phase. Cloud properties, also presented here, are obtained from 4STAR measurements of scattered light below clouds.

Samuel E LeBlanc↗

TPSAS-NF1676L-33032-DND

The North Atlantic Aerosols and Marine Ecosystems Study (NAAMES; http://naames.larc.nasa.gov) is a five-year NASA Earth-Venture Suborbital-2 Mission to characterize the plankton ecosystems and their influences on remote marine aerosols, boundary layer clouds, and their implications for climate in the North Atlantic. While marine-sourced aerosols have been shown to make important contributions to surface aerosol loading, cloud condensation nuclei and ice nuclei concentrations over remote marine and coastal regions, it is still a challenge to differentiate the marine biogenic aerosol signal from the strong influence of continental pollution outflow. The objectives of this study are to determine the major transport pathways for North American pollution outflow to the North Atlantic, and to quantify the terrestrial and marine sources of aerosols during NAAMES using ground, ship, aircraft, and remote sensing observations in conjunction with a state-of-the-art global 3-D chemical transport model (GEOS-Chem). This poster presents an initial evaluation of GEOS-Chemfor the periods of NAAMES campaigns #1 (Nov. 2015) and #2 (May 2016).

Hongyu Liu↗

TPSAS-NF1676L-34796-DND

The recently completed 2015-2017 EVS-2 mission NAAMES (The North Atlantic Aerosols and Marine Ecosystems Study) provides a unique set of airborne remote sensing and ship-based in situ measurements in a remote and under-sampled region of the Earth?s ocean. The NASA SABOR (Ship-Aircraft Bio-Optical Research) campaign was conducted during the summer of 2014, also in the Atlantic Ocean, out of the Chesapeake Bay and in the eastern coastal region of the United States. For both campaigns, the NASA GISS Research Scanning Polarimeter, a multi-angle, multi-spectral polarimeter measured the upwelling polarized radiances from aircraft. And for both campaigns, ship-based in situ measurements of the ocean were collected jointly with the aircraft measurements. We present results from the new RSP-MAPP (1) that is based on optimal estimation and that can retrieve simultaneous aerosol microphysical properties (including effective radius, single-scattering albedo, and real refractive index) and ocean color products using accurate radiative transfer, Mie calculations, and the DP (Detritus Plankton) series of accurate, numerically efficient ocean bio-optical models. The RSP-MAPP algorithm was applied to data collected during SABOR and NAAMES to retrieve aerosol microphysics and ocean products for all Aerosols-Above-Ocean (AAO) scenes. The RSP-MAPP products are compared against i) collocated aerosol extinction and backscatter profiles collected by the NASA LaRC airborne High Spectral Resolution Lidar (HSRL-1), including lidar depth profiles of the ocean diffuse attenuation coefficient and the hemispherical backscatter coefficient, and ii) collocated ship-based in situ measurements of the ocean.

Snorre Stamnes↗

TPSAS-NF1676L-13037-DND

Mineral dust has a significant and uncertain role in the direct aerosol radiative forcing of climate. Spaceborne lidars such as CALIOP help reduce these uncertainties through vertical profile measurements of aerosol optical properties. One current limitation to the accurate retrieval of aerosol extinction and optical depth from CALIOP is the assumed relationship between the aerosol extinction to aerosol backscatter (i.e. the extinction-to-backscatter ratio, also referred to here as the lidar ratio or Sa). This problem is especially acute at 1064 nm, where few estimates of the lidar ratio exist. This study uses a dataset of eight underflights of CALIOP during August 2010 by the NASA Langley Research Center airborne High Spectral Resolution Lidar (HSRL) to study Saharan dust transported across the Atlantic Ocean. The standard HSRL profile products include aerosol backscatter coefficients and depolarization ratios at both 532 nm and 1064 nm, and aerosol extinction coefficients (and therefore also lidar ratios) at 532 nm only. In this work, we further derive estimates of aerosol lidar ratios and extinction coefficients at 1064 nm via application of a two-wavelength technique that uses the 532 nm aerosol backscatter coefficients and the 1064 nm attenuated total backscatter profile. Summary statistics of the dust lidar ratio and depolarization at 532 nm and 1064 nm from these eight flights are presented. Implications for the CALIOP dust and polluted dust aerosol types and lidar ratio selection are discussed. In addition to the two-wavelength retrievals of lidar ratio at 1064 nm, a demonstration case of a 1064 nm lidar ratio retrieval over the ocean from CALIOP using the CloudSat measurement of surface scattering cross section as a constraint is presented (Josset et al, 2010).

Raymond R Rogers↗

TPSAS-NF1676L-13040-DND

We examine the feasibility of using airborne lidar data to: 1) infer CRC Convair-580 profiles of submicrometer fraction (SMF) over land (which is the fraction of aerosols with diameters less than 1 micrometer and is closely related to FMF) and 2) provide a proxy for CCN. If these initial Aerosol Extinction Aerosol Effective Radius feasibility studies prove successful, we will then apply these methodologies in subsequent studies to examine the feasibility of using CALIPSO data in a similar manner. We use data acquired by the NASA Langley Research Center airborne High Spectral Resolution Lidar (HSRL) during several recent field missions conducted by NASA, the Department of Energy, and NOAA. The airborne HSRL, which has acquired over 300 hours of data coincident with CALIPSO overpasses, measures aerosol extinction (532 nm), backscatter (532 and 1064 nm), and depolarization (532 and 1064 nm) profiles and thereby provides a dataset directly applicable to the CALIPSO measurements. During several of these field campaigns, airborne in situ measurements were acquired simultaneously within the HSRL “curtains” thereby facilitating direct correlations of the lidar observables to in situ measurements of particle size and composition, including SMF and CCN concentration. Previous studies have used simultaneous in situ measurements of SMF and Angström exponents derived from in situ scattering (Anderson et al., 2005) and remote sensing extinction (Redemann et al. 2009) measurements to build empirical relationships between these parameters. We adopt a similar approach and investigate relationships between the lidar observables, such as backscatter and extinction Angström exponents, with the coincident airborne in situ measurements of SMF and CCN concentration.

Richard Ferrare↗

TPSAS-NF1676L-29931-DND

The ACE science working group satellite concept calls for a combination of high spectral resolution aerosol lidar and a polarimeter able to determine vertical profiles of aerosol extinction and clouds. Here we discuss why an HSRL lidar is required to achieve these requirements. The primary advantage of an HSRL over an elastic backscatter lidar is that the HSRL channel allows for the independent retrieval of vertically resolved aerosol extinction without constraint. Not requiring a constraint means greater availability of retrievals in polar regions, on the night side, and in broken cloud situations, plus greater accuracy particularly in the lowest part of the atmosphere and in scenes with aerosol heterogeneity. Advantages go beyond the extinction products. Unlike attenuated backscatter, which is an integrated quantity, the aerosol backscatter coefficient depends only on the aerosol at a specific level in the atmosphere, making it preferable for use in quantitative applications. The aerosol backscatter coefficient is more accurate from an HSRL system compared to the retrieval from a single-channel system. This is because errors in both extinction and backscatter from a single-channel system increase with decreasing altitude, due to the need to accurately characterize the overlying attenuation. This means that an HSRL will also have more valid data in and near the boundary layer where aerosol is of primary interest for air quality and weather applications and for many climate objectives including aerosol-cloud interaction studies. Even cloud properties that do not directly use the HSRL capability (cloud phase and thin cirrus retrievals) benefit from the more accurate calibration of an HSRL system. The improved accuracy of backscatter and extinction also lead to better capabilities for aerosol typing, improved retrievals of aerosol radiative effect, and increased information content for combined lidar + polarimeter retrievals of profiles of microphysical properties such as vertically resolved effective radius.

S P Burton↗

TPSAS-NF1676L-29942-DND

Explore the source record for details and available documents.

Richard A Ferrare↗

TPSAS-NF1676L-23266-DND

Currently, near-surface air quality information (e.g. PM_2.5) must be inferred from column-integrated quantities (i.e. Aerosol Optical Thickness – AOT) obtained by passive remote sensing from downward-looking satellite instruments. Such retrievals must address the following questions: What do we use for the height of the aerosols? Mixed Layer (ML) height? Can we assume that near-surface aerosol extinction is about the same as the mean aerosol extinction in the ML? How well is near-surface extinction related to surface PM_2.5? How well can column AOT be used to infer near-surface aerosol extinction and PM_2.5?

Richard Ferrare↗

TPSAS-NF1676L-23428-DND

Recent theoretical advances now enable accurate characterization of both the single scattering and multiple scattering contributions to the lidar backscatter signals obtained from opaque water clouds (Hu et al., 2006). As a consequence, lidar measurements of opaque water clouds have increasingly broad applications, especially for space-based polarization-sensitive lidars such as CALIOP. Among the most prominent and useful of these are (1) calibration and assessments of calibration accuracy (e.g., O'Connor et al., 2004; Hu et al., 2006); (2) accurate estimates of extrinsic (e.g., optical depths) and intrinsic (e.g., extinction-to-backscatter ratios) optical properties of clouds and aerosol layers lying above opaque water clouds (Hu et al., 2007; Liu et al., 2015); and (3) retrievals of water cloud microphysical properties such as cloud droplet number concentrations (Hu et al., 2007; Li et al., 2011; Zeng et al., 2014). In the first part of this presentation we give an overview of the recent advances in this subject area. The second part introduces several new studies of water clouds using the multi-wavelength depolarization measurement capabilities of NASA's airborne high spectral resolution lidars (HSRL). We use these measurements to assess existing theory, validate the measurement concept and explore several new application concepts. The third part discusses changes in Arctic water clouds using CALIOP measurements. The HSRL water cloud study is supported by NASA's atmospheric composition program.

Y Hu↗

TPSAS-NF1676L-26989-DND

The NASA Langley Research Center airborne High Spectral Resolution Lidar (HSRL-2) provided extensive measurements of smoke above shallow marine clouds while deployed from the NASAER-2 aircraft during the NASAEV-S Observations of Aerosols above Clouds and their Interactions (ORACLES) mission. During the first ORACLES field campaign in September 2016, the ER-2 was deployed from Walvis Bay, Namibia and conducted flights over the south eastern Atlantic Ocean. HSRL-2 measured profiles of aerosol backscattering, extinction and aerosol optical depth (AOD) at 355 and 532 nm and aerosol backscattering and depolarization at 1064 nm and so provided an excellent characterization of the wide-spread smoke layers above shallow marine clouds. We use the HSRL-2 measurements to examine retrievals of AOD above clouds retrieved from A Train active (CALIOP) and passive (OMI, MODIS) sensors. We also present profiles of aerosol microphysical properties such as concentration and effective radius that are derived from the HSRL-2 multi wavelength measurements of backscatter and extinction.

Richard Ferrare↗

TPSAS-NF1676L-27314-DND

The NASA Langley Research Center airborne High Spectral Resolution Lidar (HSRL-2) provided extensive measurements of smoke above shallow marine clouds while deployed from the NASA ER-2 aircraft during the NASA EV-S Observations of Aerosols above Clouds and their Interactions (ORACLES) mission. During the first ORACLES field campaign in September 2016, the ER-2 was deployed from Walvis Bay, Namibia and conducted flights over the southeastern Atlantic Ocean. HSRL-2 measured profiles of aerosol backscattering, depolarization, extinction and aerosol optical depth (AOD) at 355 and 532 nm and aerosol backscattering and depolarization at 1064 nm and so provided an excellent characterization of the wide-spread smoke layers above shallow marine clouds. We present profiles of aerosol microphysical properties such as concentration and effective radius that are derived from the HSRL-2 multiwavelength measurements of backscatter and extinction.

Detlef Müller↗

TPSAS-NF1676L-11308-DND

The Lidar Atmospheric Sensing Experiment (LASE) system has operated on the NASA ER-2, P-3, and DC-8 aircraft during the past 16 years and participated in 13 field experiments. This system provides vertical profiles of water vapor mixing ratio and aerosol and cloud backscattering. A brief overview is presented on the upgrade of LASE that included refurbishment of laser diode seeding, control and data system, and zenith receiver system. These developments have enhanced the operational reliability of the system and improved its performance. The LASE system was deployed on the NASA DC-8 aircraft recently for the NASA GRIP (Genesis and Rapid Intensification Processes) field experiment, which was conducted during August and September 2010 from operational bases in Fort Lauderdale, FL and St. Croix, VI. Initial measurements from this field experiment are presented including distributions of water vapor, aerosol, and clouds. Temperature profiles from DC-8 dropsondes and nearby radiosondes are used to derive relative humidity profiles from the LASE water vapor mixing ratio profiles. Comparisons of LASE water vapor mixing ratio profiles with those measured by the new AVAPS-II dropsondes from the NASA DC-8 are also presented.

Susan A Kooi↗