Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GaN”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

An Analytical Model for Predicting Turn-ON Overshoot in Normally-OFF GaN HEMTs

Recently, a major challenge in the adoption of wide bandgap semiconductors for power electronic applications is the need to trade device performance for device safety. In this article, methods for predicting gate voltage overshoot in normally-OFF gallium nitride (GAN) high electron mobility transistors (HEMTs) are derived in order to deliver optimal device performance. Two models are proposed; a simple, yet less accurate second order model and a complex, yet more accurate fourth order model. These models allow for the calculation of gate resistances necessary for a desired amount of gate voltage overshoot. The nonlinear capacitances of the device are considered in the analysis. The models are validated with an experimental double-pulse tester. Furthermore, these newly developed models allow design engineers to extract the best possible performance of commercially available GaN devices while keeping the devices in their safe-operating region.

42 ENGINEERING↗

Demonstration of >6.0-kV Breakdown Voltage in Large Area Vertical GaN p-n Diodes With Step-Etched Junction Termination Extensions

Vertical gallium nitride (GaN) p-n diodes have garnered significant interest for use in power electronics where high-voltage blocking and high-power efficiency are of concern. In this article, we detail the growth and fabrication methods used to develop a large area (1 mm 2 ) vertical GaN p-n diode capable of a 6.0-kV breakdown. We also demonstrate a large area diode with a forward pulsed current of 3.5 A, an 8.3-mΩ$\cdot$cm 2 differential specific ON-resistance, and a 5.3-kV reverse breakdown. In addition, we report on a smaller area diode (0.063 mm 2 ) that is capable of 6.4-kV breakdown with a differential specific ON-resistance of 10.2 mΩ$\cdot$cm 2 , when accounting for current spreading through the drift region at a 45° angle. Finally, the demonstration of avalanche breakdown is shown for a 0.063-mm 2 diode with a room temperature breakdown of 5.6 kV. In this work, these results were achieved via epitaxial growth of a 50-μm drift region with a very low carrier concentration of <1×10 15 cm –3 and a carefully designed four-zone junction termination extension.

42 ENGINEERING↗

Deep GaN etching by inductively coupled plasma and induced surface defects

GaN etching was studied in Cl{sub 2}/Ar plasmas as a function of process parameters. In addition, for a better understanding of the etching mechanisms, Langmuir probe measurements and optical emission spectroscopy were carried out. Etch rate was found to depend strongly on bias power. After optimization, an etch rate greater than 1000 nm/min was achieved. A second part of this work is dedicated to the etched surface defects. An original method to estimate GaN dislocation density and to localize nanopipes in the material is presented. Columnar defects could also appear with impurities in the etching reactor. The authors also present a possible formation mechanism of those columnar defects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Atomic layer deposition of GaN at low temperatures

The authors report on the self-limiting growth of GaN thin films at low temperatures. Films were deposited on Si substrates by plasma-enhanced atomic layer deposition using trimethylgallium (TMG) and ammonia (NH{sub 3}) as the group-III and -V precursors, respectively. GaN deposition rate saturated at 185 deg. C for NH{sub 3} doses starting from 90 s. Atomic layer deposition temperature window was observed from 185 to {approx}385 deg. C. Deposition rate, which is constant at {approx}0.51 A/cycle within the temperature range of 250 - 350 deg. C, increased slightly as the temperature decreased to 185 deg. C. In the bulk film, concentrations of Ga, N, and O were constant at {approx}36.6, {approx}43.9, and {approx}19.5 at. %, respectively. C was detected only at the surface and no C impurities were found in the bulk film. High oxygen concentration in films was attributed to the oxygen impurities present in group-V precursor. High-resolution transmission electron microscopy studies revealed a microstructure consisting of small crystallites dispersed in an amorphous matrix.

36 MATERIALS SCIENCE↗

Composition and Interface Analysis of InGaN/GaN Multiquantum-Wells on GaN Substrates Using Atom Probe Tomography

In0.20Ga0.80N/GaN multi-quantum wells grown on [0001]-oriented GaN substrates with and without an InGaN buffer layer were characterized using three-dimensional atom probe tomography. In all samples, the upper interfaces of the QWs were slightly more diffuse than the lower interfaces. The buffer layers did not affect the roughness of the interfaces within the quantum well structure, a result attributed to planarization of the surface of the 1st GaN barrier layer which had an average root-mean-square roughness of 0.177 nm. The In and Ga distributions within the MQWs followed the expected distributions for a random alloy with no indications of In clustering.

Environmental Molecular Sciences Laboratory↗

Atomic layer deposition TiO 2 -Al 2 O 3 stack: An improved gate dielectric on Ga-polar GaN metal oxide semiconductor capacitors

This research focuses on the benefits and properties of TiO 2 -Al 2 O 3 nano-stack thin films deposited on Ga 2 O 3 /GaN by plasma-assisted atomic layer deposition (PA-ALD) for gate dielectric development. This combination of materials achieved a high dielectric constant, a low leakage current, and a low interface trap density. Correlations were sought between the films’ structure, composition, and electrical properties. The gate dielectrics were approximately 15 nm thick and contained 5.1 nm TiO 2 , 7.1 nm Al 2 O 3 and 2 nm Ga 2 O 3 as determined by spectroscopic ellipsometry. The interface carbon concentration, as measured by x-ray photoelectron spectroscopy (XPS) depth profile, was negligible for GaN pretreated by thermal oxidation in O 2 for 30 minutes at 850°C. The RMS roughness slightly increased after thermal oxidation and remained the same after ALD of the nano-stack, as determined by atomic force microscopy. The dielectric constant of TiO 2 -Al 2 O 3 on Ga2O3/GaN was increased to 12.5 compared to that of pure Al 2 O 3 (8~9) on GaN. In addition, the nano-stack's capacitance-voltage (C-V) hysteresis was small, with a total trap density of 8.74 × 10 11 cm -2 . The gate leakage current density (J=2.81× 10 -8 A/cm 2 ) was low at +1 V gate bias. These results demonstrate the promising potential of plasma ALD deposited TiO 2 /Al 2 O 3 for serving as the gate oxide on Ga 2 O 3 /GaN based MOS devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ar{sup +}-irradiation-induced damage in hydride vapor-phase epitaxy GaN films

The authors have investigated the electrical characteristics of hydride vapor-phase epitaxy GaN films exposed to Ar{sup +} irradiation, employing Schottky barrier diodes. The Ar{sup +} irradiation tends to largely increase the effective carrier concentration in the near surface region of GaN up to ∼25 nm, due to the generation of donor-type N vacancy defects, compared to the original value before the irradiation. More interestingly, acceptor-type deep-level defects are found to be formed at ∼2.1, ∼2.9, and ∼3.2 eV below the conduction band in the subsequently deeper region, in which Ga vacancies introduced by the Ar{sup +} irradiation are considered to be in-diffused and immediately combined with hydrogen. These N vacancies and hydrogenated Ga vacancies formed are dominantly responsible for changing the depth profiles of the effective carrier concentration via the carrier generation, the carrier trapping, and/or carrier compensation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Substrate temperature influence on the properties of GaN thin films grown by hollow-cathode plasma-assisted atomic layer deposition

Gallium nitride films were grown by hollow cathode plasma-assisted atomic layer deposition using triethylgallium and N{sub 2}/H{sub 2} plasma. An optimized recipe for GaN film was developed, and the effect of substrate temperature was studied in both self-limiting growth window and thermal decomposition-limited growth region. With increased substrate temperature, film crystallinity improved, and the optical band edge decreased from 3.60 to 3.52 eV. The refractive index and reflectivity in Reststrahlen band increased with the substrate temperature. Compressive strain is observed for both samples, and the surface roughness is observed to increase with the substrate temperature. Despite these temperature dependent material properties, the chemical composition, E{sub 1}(TO), phonon position, and crystalline phases present in the GaN film were relatively independent from growth temperature.

42 ENGINEERING↗

Temperature-induced degradation of GaN HEMT: An in situ heating study

High-power electronics, such as GaN high electron mobility transistors (HEMTs), are expected to perform reliably in high-temperature conditions. This study aims to gain an understanding of the microscopic origin of both material and device vulnerabilities to high temperatures by real-time monitoring of the onset of structural degradation under varying temperature conditions. This is achieved by operating GaN HEMT devices in situ inside a transmission electron microscope (TEM). Electron-transparent specimens are prepared from a bulk device and heated up to 800 °C. High-resolution TEM (HRTEM), scanning TEM (STEM), energy-dispersive x-ray spectroscopy (EDS), and geometric phase analysis (GPA) are performed to evaluate crystal quality, material diffusion, and strain propagation in the sample before and after heating. Gate contact area reduction is visible from 470 °C accompanied by Ni/Au intermixing near the gate/AlGaN interface. Elevated temperatures induce significant out-of-plane lattice expansion at the SiNx/GaN/AlGaN interface, as revealed by geometry-phase GPA strain maps, while in-plane strains remain relatively consistent. Exposure to temperatures exceeding 500 °C leads to almost two orders of magnitude increase in leakage current in bulk devices in this study, which complements the results from our TEM experiment. The findings of this study offer real-time visual insights into identifying the initial location of degradation and highlight the impact of temperature on the bulk device’s structure, electrical properties, and material degradation.

36 MATERIALS SCIENCE↗

Density of displacement cascades for cluster ions: An algorithm of calculation and the influence on damage formation in ZnO and GaN

A method of statistical calculation of parameters of averaged individual collision cascades formed by cluster ions composed of a small number of atoms is suggested. The results of calculations are compared with experimental data on the accumulation of structural damage in ZnO and GaN irradiated with PF{sub n} ions (n = 0, 2, 4) with the specific energy of 1.3 keV/amu at room temperature. It is shown that, for ZnO, the density of the displacement cascade does not affect the concentration of stable postimplantation defects in the region of the bulk peak, but significantly affects this concentration in the near-surface region. For GaN, as the displacement-cascade density increases, both an increase in the concentration of stable defects in the region of the bulk maximum of the defect concentration and an increase in the thickness of the surface's amorphous layer are observed.

36 MATERIALS SCIENCE↗

Phase separation and nonradiative carrier recombination in active regions of light-emitting devices based on InGaN quantum dots in a GaN or AlGaN matrix

Structures with InGaN nanolayers within GaN and AlGaN matrices, which constitute active regions of light-emitting devices, have been studied. Spectra and relative intensities of photoluminescence (PL) in the temperature range 20-300 K and the dependence of the position of the PL peak on the energy of the excitation photons have been measured. It is shown that, to account for the temperature dependence of the PL intensity, it is necessary to take into consideration, in addition to the nonradiative recombination via defects in the matrix and in the residual quantum well (RQW), an additional recombination channel with low activation energy, which is presumably associated with defects located close to quantum dots. It is demonstrated that structures with the AlGaN matrix show a larger decrease in the PL intensity upon an increase in temperature from 50 to {approx}200 K, compared with structures with the GaN matrix. Analysis of the temperature dependence of the PL intensity in terms of the model that considers these three channels of nonradiative recombination shows that this dependence is associated with a decrease in the carrier's localization energy relative to the ground state in the RQW. Such a decrease is due to suppression of the phase separation in InGaN layers grown within the AlGaN matrix. This behavior is confirmed by PL measurements at different excitation photon's energies and leads, in addition to the lower localization energy, a decrease in the concentration of recombination centers is observed for these samples.

36 MATERIALS SCIENCE↗

Radiation effects in multilayer ohmic contacts Au-Ti-Al-Ti-n-GaN

Radiation effects in the Au-Ti-Al-Ti-n-GaN multilayer metallization subjected to irradiation with {sup 60}Co {gamma}-ray photons in the dose range 4 x 10{sup 6}-2 x 10{sup 7} Gy are considered, and the effect of radiation on the initial contact structures and the structures subjected to a rapid thermal annealing (RTA) at high-temperature in the nitrogen atmosphere is studied. Irradiation does not significantly affect the properties of structures that were not subjected to the heat treatment. An RTA at 700 deg. C brings about a deterioration of the contact-layer morphology. The morphological and structural transformations in the contact metallization due to the RTA are enhanced by irradiation with {gamma}-ray photons. The combined radiation-thermal treatment is conducive to the mass transfer between contacting layers. In addition, after {gamma}-ray irradiation with the dose of 2 x 10{sup 7} Gy, the oxygen-impurity atoms appear over the entire contact's structure and are observed in a large amount in the near-contact GaN region.

36 MATERIALS SCIENCE↗

Optical properties of quaternary GaN{sub x}As{sub y}P{sub 1-x-y} semiconductor alloys

The optical properties of quaternary GaN{sub x}As{sub y}P{sub 1-x-y} semiconductor alloys grown on a GaP (100) substrate surface are studied by photoluminescence spectroscopy in the temperature range 20-300 K and by photoluminescence excitation spectroscopy at liquid-nitrogen temperature. The measurements are carried out for the GaN{sub x}As{sub y}P{sub 1-x-y} alloys, for which the nitrogen and arsenic molar fractions x and y range from 0.006 to 0.012 and from 0.00 to 0.18, respectively. A comparative analysis of the data is conducted, and the dependences of the energy position of the photoluminescence peak on the composition of the quaternary alloy are established. From the studies of photoluminescence in the range 20-300 K, it is found that the temperature dependence of the position of the photoluminescence peak substantially differs from the behavior described by Varshni's expression.

36 MATERIALS SCIENCE↗

Electroreflectance study of the effect of {gamma} radiation on the optical properties of epitaxial GaN films

Experimental data on the electroreflectance spectra of {gamma}-irradiated epitaxial GaN films on sapphire are reported. The irradiation doses are 10{sup 5}-2 Multiplication-Sign 10{sup 6} rad. The theoretical electroreflectance spectra calculated on the basis of a model of three types of transitions are in agreement with experimental data with reasonable accuracy. The energies and broadenings of the transitions derived in the context of the model give grounds to infer that, in the GaN films, there are internal stresses dependent on the {gamma}-irradiation dose.

36 MATERIALS SCIENCE↗

Influence of the carrier Gas, trimethylgallium flow, and growth time on the character of the selective epitaxy of GaN

The influence of the carrier gas, trimethylgallium flow, and growth time on the character of the selective epitaxy of GaN in stripe windows oriented along the crystallographic direction Left-Pointing-Angle-Bracket 11-bar00 Right-Pointing-Angle-Bracket GaN for various widths of the mask between the stripes is studied. It is shown that the addition of nitrogen in the reactor atmosphere leads to changes in the form of the stripes in the case of wide (40 {mu}m) mask from a rectangular form restricted by a {l_brace}1 1-bar20{r_brace} lateral face to a trapezoidal form restricted by a {l_brace}1 1-bar22{r_brace} lateral face. It is also shown that during growth in the nitrogen-hydrogen mixture, the gallium flow starts to considerably affect the form of the growing stripes. It is shown that the process is significantly unstable, which leads to a noticeable variation in the form type as the transverse section of the stripe increases.

36 MATERIALS SCIENCE↗

Si{sub 3}N{sub 4} layers for the in-situ passivation of GaN-based HEMT structures

A method for the in situ passivation of GaN-based structures with silicon nitride in the growth chamber of a metal organic vapor phase epitaxy (MOVPE) reactor is described. The structural and electrical properties of the obtained layers are investigated. The in situ and ex situ passivation of transistor structures with silicon nitride in an electron-beam-evaporation device are compared. It is shown that ex situ passivation changes neither the initial carrier concentration nor the mobility. In situ passivation makes it possible to protect the structure surface against uncontrollable degradation upon the finishing of growth and extraction to atmosphere. In the in situ passivated structure, the carrier concentration increases and the mobility decreases. This effect should be taken into account when manufacturing passivated GaN-based transistor structures.

36 MATERIALS SCIENCE↗

Effect of the Ti-Nanolayer Thickness on the Self-Lift-off of Thick GaN Epitaxial Layers

The effect of the type of substrate, sapphire substrate (c- and r-orientation) or GaN/Al{sub 2}O{sub 3} template (c- and r-orientations), on the nitridation of an amorphous titanium nanolayer is shown. The effect of the titanium-nanolayer thickness on thick GaN epitaxial layer self-separation from the substrate is revealed. The titanium-nanolayer thickness at which thick GaN layer is reproducibly self-separated is within 20–40 nm.

36 MATERIALS SCIENCE↗

Transport of hot charge carriers in Si, GaAs, InGaAs, and GaN submicrometer semiconductor structures with nanometer-scale clusters of radiation-induced defects

The distributions of the radii of subclusters of radiation-induced defects and of the distances between the cores of these subclusters are calculated for Si, GaAs, and GaN. The features of the transport of hot charge carriers in the above materials upon irradiation with neutrons are discussed. A burst in the velocity of electrons in Si, GaAs, InGaAs, and GaN before and after irradiation is calculated for the first time; also, the extent of manifestation of the above effect in different semiconductor materials is compared.

36 MATERIALS SCIENCE↗