Large strain, elasto-plastic finite element analysis
Two dimensional structures large strain elastoplastic analysis by finite element method, using variational principles to derive equilibrium equations
Evensen, D. A.↗
SEARCH · Engineering Papers
Results for “Finite Elements”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Stress analysis of spacecraft parachutes using finite elements and large deformation theory
Spacecraft parachute stress analysis, using finite elements with nonlinear elastic properties to obtain shape and load distribution
Mullins, W. M.↗
Elastic-plastic finite element analysis of cracked solids Progress report
Elastic-plastic finite element analysis of cracked solids
Mylonas, C.↗
Nonapplicability of linear finite element programs to the stress analysis of tires
A static finite element stress analysis of an inflated radial car tire was carried out. The deformed shape of the sidewall presents outward bulging. The analysis of a homogeneous isotropic toroidal shell shows that the problem is common to all solids of this type. The study suggests that the geometric stiffness due to the inflation pressure has to be taken into account. Also, the resulting large displacements make it necessary for the geometry to be updated at each load step.
Durand, M.↗
A finite element tensor approach to plate buckling and postbuckling.
A practical finite element method is presented for geometrically nonlinear (von Karman) plate problems. Symmetric strain energy tensors provide an efficient formulation and solution, and allow the effects of initial imperfections to be considered. An unbalanced force iteration is employed, with the advantage that the time consuming Gauss decomposition needs to be performed only once. The convergence is controlled by an automatically computed relaxation factor, and this makes the method applicable in advanced stages of non-linearity. Several different triangular elements are used in explicitly deriving the required tensors.
Vos, R. G.↗
The finite element method in shell stability analysis.
A development of the finite element method for thin shell instability analysis is presented, covering three principal aspects: (1) representation of shell geometry, (2) representation of element behavior, and (3) algorithmic tools for solution of the large-order systems of nonlinear algebraic equations which characterize various phases of shell instability. Two shell elements are described, an arbitrary quadrilateral and a triangle, and numerical results are presented for two widely-employed comparison problems for linear (stable) analysis. Two shell problems which include instability effects are also solved.-
Gallagher, R. H.↗
Finite element analysis of laminated plates and shells, volume 1
The finite element method is used to investigate the static behavior of laminated composite flat plates and cylindrical shells. The analysis incorporates the effects of transverse shear deformation in each layer through the assumption that the normals to the undeformed layer midsurface remain straight but need not be normal to the mid-surface after deformation. A digital computer program was developed to perform the required computations. The program includes a very efficient equation solution code which permits the analysis of large size problems. The method is applied to the problem of stretching and bending of a perforated curved plate.
Seide, P.↗
Finite elements for contact problems in two-dimensional elastodynamics
A finite element approach for contact problems in two dimensional elastodynamics was proposed. Sticking, sliding, and frictional contact were taken into account. The method consisted of a modification of the shape functions, in the contact region, in order to involve the nodes of the contacting body. The formulation was symmetric (both bodies were contactors and targets), in order to avoid interpenetration. Compatibility over the interfaces was satisfied. The method was applied to the impact of a block on a rigid target. It is shown that the formulation can be applied to fluid structure interaction, and to problems involving material nonlinearity.
Zimmermann, T. K.↗
An approach to simulation of the finite element machine
The paper describes the simulation approach for the finite element machine (FEM), a special-purpose computer for structural analysis calculations under development at the NASA-Langley Research Center. The FEM consists of an array (1000 or more) of general-purpose microcomputers performing structural analysis in an asychronous parallel manner. A simulator of sufficient flexibility to model the behavior of the FEM on many levels has been designed and coded, and verification has begun using the experimental FEM hardware. The structure of the simulator is described, and preliminary simulation results are presented.
Sawyer, P. L.↗
Finite element analysis of fluid-filled elastic piping systems
Two finite element procedures are described for predicting the dynamic response of general 3-D fluid-filled elastic piping systems. The first approach, a low frequency procedure, models each straight pipe or elbow as a sequence of beams. The contained fluid is modeled as a separate coincident sequence axial members (rods) which are tied to the pipe in the lateral direction. The model includes the pipe hoop strain correction to the fluid sound speed and the flexibility factor correction to the elbow flexibility. The second modeling approach, an intermediate frequency procedure, follows generally the original Zienkiewicz-Newton scheme for coupled fluid-structure problems except that the velocity potential is used as the fundamental fluid unknown to symmetrize the coefficient matrices. From comparisons of the beam model predictions to both experimental data and the 3-D model, the beam model is validated for frequencies up to about two-thirds of the lowest fluid-filled labor pipe mode. Accurate elbow flexibility factors are seen to be crucial for effective beam modeling of piping systems.
Everstine, G. C.↗
Moving finite elements in 2-D
The mathematical background regarding the moving finite element (MFE) method of Miller and Miller (1981) is discussed, taking into account a general system of partial differential equations (PDE) and the amenability of the MFE method in two dimensions to code modularization and to semiautomatic user-construction of numerous PDE systems for both Dirichlet and zero-Neumann boundary conditions. A description of test problem results is presented, giving attention to aspects of single square wave propagation, and a solution of the heat equation.
Gelinas, R. J.↗
A finite element method for nonlinear forced vibrations of rectangular plates
The finite element method has been extended to determine the response of large amplitude forced vibrations of thin plates. A harmonic force matrix of a rectangular element under uniform harmonic excitation is developed for nonlinear forced vibration analysis. Inplane deformation and inertia are both considered in the formulation. Results obtained are compared with simple elliptic response, perturbation and other approximation solutions.
Mei, C.↗
Finite-element analysis of end-notch flexure specimens
A finite-element analysis of the end-notch flexure specimen for Mode II interlaminar fracture toughness measurement was conducted. The effects of friction between the crack faces and large deflection on the evaluation of G(IIc) from this specimen were investigated. Results of this study are presented in this paper.
Mall, S.↗
A global-local finite element method suitable for parallel computations
A global-local finite element analysis procedure is developed based on the fast convergent nature of FEM in displacement. A special scheme is used to utilize the global displacement solution as boundary conditions for local regions of interest. In the local region, a refined mesh is used for further stress analysis. This global-local procedure can be easily programmed in parallel on MIMD multi-processor computers for significant time savings. A Sequent Balance 21000 system is used for demonstrating the parallel programming.
Sun, C. T.↗
Progress on a Taylor weak statement finite element algorithm for high-speed aerodynamic flows
A new finite element numerical Computational Fluid Dynamics (CFD) algorithm has matured to the point of efficiently solving two-dimensional high speed real-gas compressible flow problems in generalized coordinates on modern vector computer systems. The algorithm employs a Taylor Weak Statement classical Galerkin formulation, a variably implicit Newton iteration, and a tensor matrix product factorization of the linear algebra Jacobian under a generalized coordinate transformation. Allowing for a general two-dimensional conservation law system, the algorithm has been exercised on the Euler and laminar forms of the Navier-Stokes equations. Real-gas fluid properties are admitted, and numerical results verify solution accuracy, efficiency, and stability over a range of test problem parameters.
Baker, A. J.↗
An implicit and stiffly stable finite element CFD algorithm for unsteady aerodynamics
A stable and accurate finite element CFD algorithm for hyperbolic/incompletely parabolic conservation law systems is described and verified. It combines a Taylor weak statement FEM, an optimal implicit Runge-Kutta time integration algorithm, and a matrix tensor product approximate factorization linear algebra procedure. The results of computational experiments show that the developed algorithm is robust.
Baker, A. J.↗
Finite element computation of hypersonic flow past a complete body
The finite element method was applied to compressible flows past complete blunt bodies in a first attempt to use the method to model hypersonic flow past re-entry vehicles. A Runge-Kutta time marching scheme was utilized and was found to adequately handle the bow shock and downstream wake. Adaptive refinement was successively applied to the flow field grid, and improvement in solution accuracy was observed. The results reported in this paper include the flow past a circular cylinder at Mach 3, and the flow in the plane of symmetry for the flow past a sphere at Mach 10.
Hommel, Mark↗
Modeling and analysis of the space shuttle nose-gear tire with semianalytic finite elements
A computational procedure is presented for the geometrically nonlinear analysis of aircraft tires. The Space Shuttle Orbiter nose gear tire was modeled by using a two-dimensional laminated anisotropic shell theory with the effects of variation in material and geometric parameters included. The four key elements of the procedure are: (1) semianalytic finite elements in which the shell variables are represented by Fourier series in the circumferential direction and piecewise polynominals in the meridional direction; (2) a mixed formulation with the fundamental unknowns consisting of strain parameters, stress-resultant parameters, and generalized displacements; (3) multilevel operator splitting to effect successive simplifications, and to uncouple the equations associated with different Fourier harmonics; and (4) multilevel iterative procedures and reduction techniques to generate the response of the shell. Numerical results of the Space Shuttle Orbiter nose gear tire model are compared with experimental measurements of the tire subjected to inflation loading.
Kim, Kyun O.↗