SEARCH · Engineering Papers

Results for “FORECASTING MODEL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

All sources NASA NTRS DOE OSTI

DOE OSTI2016

Modeling the Evolution and Life Cycle of Stable Cold Pools

Stable cold pools in California’s Central Valley (CV) are conducive to freezing temperatures, high relative humidity, and, in some cases, fog. Here, it will be shown that the Weather Research and Forecasting (WRF) Model as commonly configured cannot reproduce such conditions because of a persistent warm and dry bias near the surface. It was discovered that removing horizontal diffusion, which by default operates on model levels and thus up and down the valley’s sides, can reduce but not entirely fix the problem. Further improvements include enhancing the near-surface vertical resolution and the surface–air coupling, as both directly control the surface fluxes, especially evaporation. Yet, these alterations actually have the largest impact in the forested region surrounding the Central Valley, and influence the nighttime relative humidity in the CV only indirectly via nocturnal drainage flows. While it is not clear how realistic are the increased evaporation in the forest or the drainage flows, how and why these alterations result in significantly improved relative humidity reconstructions within the Central Valley are shown.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2026

Calibration of urban building energy model using smart meter data for district peak load prediction

Urban building energy modeling (UBEM) is a powerful approach to assessing baseline building energy performance and retrofits with new technologies across building stocks in cities. However, the accuracy of UBEM is often constrained by the limited availability of reliable data about building characteristics and operations, such as envelope efficiency levels, HVAC system performance, and end-use load patterns. Existing research has performed UBEM calibration using annual or monthly energy consumption data, which falls short when higher-resolution time series applications are needed, such as peak load prediction for utility operation planning. This study presents a new framework for calibrating building energy models at urban scale using smart meter data, targeting the accurate prediction of summer peak electricity loads to support robust grid planning. The framework first integrates various data sources to enhance baseline input assumptions for building models, and then calibrates the baseline models through a pattern-matching approach. A case study using CityBES and two years of AMI data from over 9000 residential customers in Portland, Oregon, demonstrated the workflow and its effectiveness. The calibrated models achieved a daily peak load mean absolute percentage error of 2.6 % during the heatwave in the calibration year, and 2.0 % in the validation year using another year of AMI data. Using the calibrated models, we analyzed the demand flexibility potential of the district building stock as an application of UBEM calibration. The findings affirm the appropriate use of UBEM for peak electric load forecasting and demand side management at the utility distribution system level.

AMI data↗

DOE OSTI2023

Examining the effects of soil entrainment during nuclear cloud rise on fallout predictions using a multiscale atmospheric modeling framework

Current operational models for nuclear cloud rise over land were developed and validated using observations from shallow-buried or surface detonations, where lofted soil quickly mixed with fission products from the detonation. These models poorly predict fallout from elevated detonations near the fallout-free height of burst (FFHOB), where interactions with the ground are limited and the mixing of fission products and lofted soil is incomplete. Fallout-free is a misnomer at this HOB, as fallout was observed in these cases, but was below the levels of concern, especially off-grounds of the nuclear test site. To correctly characterize and model fallout from detonations near the FFHOB, models must be developed which can capture the stratified nature of the particle and activity-size distributions within the cloud. Previously, it was shown that the Weather Research and Forecasting (WRF) model can accurately simulate nuclear cloud rise for airbursts with little to no ground interactions (Arthur et al., 2021). That work is expanded here by (1) using a radiation-hydrodynamics code to improve the fireball initialization in WRF, (2) further developing an aerosol package from WRF-Chem to simulate lofted soil, and (3) combining the WRF cloud rise simulations with the operational models used at the National Atmospheric Release Advisory Center (NARAC) for fallout modeling. Using this combination of codes, the Upshot-Knothole Grable detonation, which was just below the FFHOB, is simulated from seconds after detonation through cloud rise and fallout, and results are compared to historical test data. Here, the results show improved prediction of dose rate and highlight the need to correctly characterize the entrainment of material into the cloud and the subsequent mixing of fission products with entrained material.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

DOE OSTI2018

Shallow Cumulus in WRF Parameterizations Evaluated against LASSO Large-Eddy Simulations

Abstract Representation of shallow cumulus is a challenge for mesoscale numerical weather prediction models. These cloud fields have important effects on temperature, solar irradiance, convective initiation, and pollutant transport, among other processes. Recent improvements to physics schemes available in the Weather Research and Forecasting (WRF) Model aim to improve representation of shallow cumulus, in particular over land. The DOE LES ARM Symbiotic Simulation and Observation Workflow (LASSO) project provides several cases that we use here to test the new physics improvements. The LASSO cases use multiple large-scale forcings to drive large-eddy simulations (LES), and the LES output is easily compared to output from WRF single-column simulations driven with the same initial conditions and forcings. The new Mellor–Yamada–Nakanishi–Niino (MYNN) eddy diffusivity mass-flux (EDMF) boundary layer and shallow cloud scheme produces clouds with timing, liquid water path (LWP), and cloud fraction that agree well with LES over a wide range of those variables. Here we examine those variables and test the scheme’s sensitivity to perturbations of a few key parameters. We also discuss the challenges and uncertainties of single-column tests. The older, simpler total energy mass-flux (TEMF) scheme is included for comparison, and its tuning is improved. This is the first published use of the LASSO cases for parameterization development, and the first published study to use such a large number of cases with varying cloud amount. This is also the first study to use a more precise combined infrared and microwave retrieval of LWP to evaluate modeled clouds.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2019

Cold-Air Outbreaks in the Marine Boundary Layer Experiment (COMBLE) Science Implementation Plan

Boreal regions have experienced warming faster than the rest of the Earth, and the arctic ice cover has declined at a rate faster than predicted by most climate models. Uncertainties in climate projections for this region are large, in part due to the lack of observational guidance to constrain the treatment of aerosol-cloud-precipitation linkages in climate models. To remedy this shortfall, field campaigns have been conducted to collect integrated, comprehensive measurements under specific atmospheric regimes. While considerable efforts have been devoted to subtropical marine boundary-layer clouds, as well as to clouds in the stable arctic environment, very few targeted observations exist of convective boundary-layer clouds that form over open water when cold airmasses are advected off ice-covered regions or boreal continents. There is an urgent need to shed light on the dynamics and microphysical properties of clouds and precipitation in the high-latitude marine boundary layer during cold-air outbreaks. Despite the common occurrence of linear and cellular cloud patterns that typify cold-air outbreaks, little is known about the properties of these clouds; how they vary with surface, environmental, and aerosol conditions; the role of cold-air outbreaks in the global atmospheric and ocean circulation; and the accuracy of the treatment of this atmospheric regime in climate models. Thus, we proposed to conduct the Cold-Air Outbreaks in the Marine Boundary Layer Experiment (COMBLE), to focus on marine boundary-layer clouds during cold-air outbreaks. COMBLE will deploy the first ARM Mobile Facility (AMF1) and an AMF “satellite” station in the far North Atlantic in January–May 2020. COMBLE will take advantage of the synergy with several coincident campaigns, notably MOSAIC, which will characterize the source airmasses of cold-air outbreaks over the arctic ice, and (AC) 3 , which will operate several aircraft between northern Scandinavia and the MOSAIC deployment to document evolution of these airmasses. COMBLE and its sister campaigns will compose a four-member array of supersites between northern Scandinavia and the Arctic, each with profiling and in situ cloud, precipitation, radiation, and aerosol measurements. COMBLE will be guided by six science themes. The first five deal with boundary-layer convection in cold-air outbreaks: (1) the fetch-dependent mesoscale organization of clouds and precipitation, including linear and cellular convection; (2) surface heat and momentum fluxes and vertical profiles of temperature, humidity, wind, and turbulence; (3) vertical structure of clouds and precipitation; (4) the sources and sinks of aerosol, including ice-nucleating particles, and the role of cloud-active aerosol on cloud processes and radiative fluxes; and (5) the influence of these four themes on polar cyclogenesis and polar low vertical structure. The overarching sixth theme is that COMBLE will provide integrated data sets of dynamical, thermodynamic, and cloud microphysical characteristics of marine boundary-layer convection in cold-air outbreaks, including cloud and aerosol properties, that will enable constraining high-resolution numerical simulations, developing process-level understanding, and, subsequently, evaluating and improving representations of shallow convection in weather and climate models.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

Understanding Processes Controlling the Temporal and Spatial Variations of PBL Structures Over the ARM SGP Site

The surface heat, moisture, and momentum fluxes are transferred to the atmosphere above through the planetary boundary layer (PBL), where vertical mixing due to turbulent eddies of different sizes plays critical roles. Therefore, reliably representing PBL processes in numerical models is critical for weather, climate, and air quality prediction. Currently, there are over ten PBL schemes that are selectable within the advanced research version of the Weather Research and Forecasting (WRF) model, indicative of the challenges in capturing the impacts of turbulence within the PBL in models. Further improvements in PBL parameterizations are needed for both weather and climate models, as emphasized in many recent national reports, but require an advanced understanding of the underlying boundary layer processes from observations. This project takes advantage of Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) investments in the atmospheric boundary layer observations and Large-Eddy Simulation (LES) ARM Symbiotic Simulation and Observation (LASSO) simulations to characterize PBL structures, understand key physical processes controlling the mixed layer development, and to evaluate PBL parameterization.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2021

Modeling potential air temperature reductions yielded by cool roofs and urban irrigation in the Kansas City Metropolitan Area

In this work, we evaluate two mitigation strategies for urban heat island (UHI) in the Kansas City Metropolitan Area (KCMA). Using the Weather Research and Forecasting (WRF) model, we assess the potential benefits of reflective “cool” roofs and urban irrigation on air temperature in typical summer conditions between 2011 and 2015, and during six of the strongest historical heat waves from 2005 to 2016. Under the typical summer conditions, we simulate 2-m air temperature for 10 summer weeks, finding average daytime (07:00–19:00 local time) temperature reductions of 0.08 and 0.28 °C for cool roofs and urban irrigation, respectively. During the six heat-wave episodes, we find daytime temperature reductions of 0.02 and 0.26 °C for the two scenarios, similar to those under typical summer conditions. Our results suggest that urban irrigation can be more efficient than cool roofs in mitigating UHI in metropolitan regions where the majority of the land cover is comprised of areas with low urban (i.e., non-vegetated) fractions. Finally, we find the alteration of surface conditions due to enhanced roof albedos influences precipitation within the WRF simulation, in particular during the heat waves. Further research would be necessary to determine the robustness of this last finding.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2019

Explicit Filtering and Reconstruction to Reduce Grid Dependence in Convective Boundary Layer Simulations Using WRF-LES

As model grid resolutions move from the mesoscale to the microscale, turbulent structures represented in atmospheric boundary layer simulations change dramatically. At intermediate resolutions, the so-called gray zone, turbulent motions are not resolved accurately, posing a challenge to numerical simulations. The representation of turbulence is also highly sensitive to the choice of closure model. Here, we examine explicit filtering and reconstruction in the gray zone as a technique to better represent atmospheric turbulence. The convective boundary layer is simulated using the Weather Research and Forecasting (WRF) Model with horizontal resolutions ranging from 25 m to 1 km. Four large-eddy simulation (LES) turbulence models are considered: the Smagorinsky model, the TKE-1.5 model, and two versions of the dynamic reconstruction model (DRM). The models are evaluated by their ability to produce consistent mean potential temperature profiles, heat and momentum fluxes, velocity fields, and turbulent kinetic energy spectra as the grids become coarser. The DRM, a mixed model that uses an explicit filtering and reconstruction technique to account for resolvable subfilter-scale (RSFS) stresses, performs very well at resolutions of 500 m and 1 km without any special tuning, whereas the Smagorinsky and TKE-1.5 models produce heavily grid-dependent results.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

Predicting spring phenology in deciduous broadleaf forests: NEON phenology forecasting community challenge

Accurate models are important to predict how global climate change will continue to alter plant phenology and near-term ecological forecasts can be used to iteratively improve models and evaluate predictions that are made a priori. The Ecological Forecasting Initiative's National Ecological Observatory Network (NEON) Forecasting Challenge, is an open challenge to the community to forecast daily greenness values, measured through digital images collected by the PhenoCam Network at NEON sites before the data are collected. For the first round of the challenge, which is presented here, we forecasted canopy greenness throughout the spring at eight deciduous broadleaf sites to investigate when, where, and for what model type phenology forecast skill is highest. A total of 192,536 predictions were submitted, representing eighteen models, including a persistence and a day of year mean null models. We found that overall forecast skill was highest when forecasting earlier in the greenup curve compared to the end, for shorter lead times, for sites that greened up earlier, and when submitting forecasts during times other than near budburst. The models based on day of year historical mean had the highest predictive skill across the challenge period. In this first round of the challenge, by synthesizing across forecasts, we started to elucidate what factors affect the predictive skill of near-term phenology forecasts.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2017

Nonlinear response of hail precipitation rate to environmental moisture content: A real case modeling study of an episodic midlatitude severe convective event: Hail and Environmental Moisture

The dependence of hail production on initial moisture content in a simulated midlatitude episodic convective event occurred in northeast China on 10–11 June 2005 was investigated using the Weather Research and Forecasting (WRF) model with a double-moment microphysics scheme where both graupel and hail are considered. Three sensitivity experiments were performed by modifying the initial water vapor mixing ratio profile to 90% (“Q-10%”), 105% (“Q+5%”), and 110% (“Q+10%”) of the initial conditions used for the control simulation. It was found that increasing the initial water vapor content caused the hail and total precipitation rates to increase during the first 5 h. The precipitation response to increasing water vapor content was monotonic for this first episode; however, for the event's second episode, the hail precipitation rate responds to the initial water vapor profile nonlinearly, while the total precipitation rate responds mostly monotonically. In particular, simulation Q+5% achieves the largest hail production rate while simulation Q+10% has the largest total precipitation rate. In contrast, during the second episode simulation Q-10% has the strongest vertical motion, produces the most cloud ice and snow, but has the lowest hail production. Analysis shows that increasing the initial moisture content directly increases the precipitation during the first episode, which subsequently induces a stronger, longer-asting cold pool that limits the development of deep convection during the second episode.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2019

High-Resolution Simulation of Snowfall over the Korean Eastern Coastal Region Using WRF Model: Sensitivity to Domain Nesting-Down Strategy

The eastern coastal area of the Korean Peninsula, Yeongdong region, often experiences severe snowfall during the winter season. We studied here the development mechanism of a snowfall case occurred in February 2014 using the Weather Research and Forecasting (WRF) model at the convection-permitting resolution of 1 km. The model reasonably captured the observed snowfall, and three factors were discovered as important contributors to this snowfall case: a temperature contrast between land and ocean, a high-pressure system over the northeastern part of the Korean Peninsula, and the mountainous terrain. Cold and dry air blown from the high-pressure system gains heat and moisture when it passes over the East Sea enhancing the low-level instability. When the air mass reaches the coastline, updraft is generated by the density difference with the continental atmosphere and by the mountain slope. Further sensitivity experiments were conducted by adjusting strategies of nesting down (offline and online). Sensitivity experiments consist of three offline nesting experiments with different boundary condition update frequencies in 6, 3 and 1 h and one online nesting experiment that updates the boundary condition every integration time step. The major snowfall along the mountain range located in the middle of domain does not change significantly regardless of the nesting frequency. The offline nesting causes unphysical discontinuities of precipitation along the north and east sides of lateral boundary where wind blows in, which are caused by the absence of condensed hydrometeor variables in the lateral boundary condition. The domain nesting strategy tested in this study has dramatically impacted on the upper troposphere structure in the model: artificial fluctuations at the upper troposphere in the offline nesting simulations were significantly alleviated in the online nesting simulation.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2014

Stochastic Modeling at Multiple Timescales (Presentation)

This presentation provides an overview of stochastic modeling at multiple timescales.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2026

Understanding Subseasonal Moisture Recycling from Extreme MCSs Using a Land–Atmosphere Coupled Water Tracer Model

Extreme precipitation events often produce severe flooding and pose significant threats to our society. However, their subseasonal impacts on the terrestrial and atmospheric systems are not well understood. Here, we use a new land–atmosphere coupled water tracer tool embedded in the Weather Research and Forecasting (WRF) Model to “tag” precipitation produced by a series of extreme mesoscale convective systems (MCSs) in May 2015 over the southern Great Plains to reveal their contributions to different terrestrial water storages and moisture recycling during May–July. During May, we find that precipitation from earlier MCSs can contribute to 20%–50% of total evapotranspiration (ET) in later May and contribute ∼10% of local precipitation for later MCSs. After May, the water “tagged” to preceding May MCS events has the most active contribution to moisture recycling during the first 5 days in June, but this contribution diminishes quickly afterward. Both periods indicate a quick turnover of tagged precipitation, which may be representative of the southern Great Plains region. The quick turnover is closely associated with the direct evaporation from the soil surface due to the predominant shrubland and grassland coverage over this region. Over some forested areas, however, the tracer-ET flux is dominated by transpiration that stably supplies a small fraction (<1%) of moisture to the atmosphere throughout June and July. In conclusion, the tracer-contributed plume (through evaporation and transpiration) in atmospheric moisture can extend 500–700 km downstream between May and July, highlighting the far-reaching contribution to moisture recycling and precipitation from the tagged MCS events in the southern Great Plains.

Atmosphere-land interaction↗

DOE OSTI2025

Self-Supervised T-GCN for Detection of Disturbance and Propagation in Power Grid

Urban power systems increasingly rely on dense sensing to monitor grid reliability, yet disturbance labels are scarce and events are rare. We present a self-supervised spatio-temporal method that detects, localizes, and characterizes grid frequency disturbances across urban areas using only unlabeled data. Our approach trains a tiny Temporal Graph Convolutional Network (T-GCN) to forecast per-site frequency residuals (deviation from 60 Hz). The sensor graph is constructed directly from signals using pre-event Pearson correlation with a cross-correlation lag penalty without geocoding. At inference, node-level anomalies are the model's forecast errors; region-level alarms arise from connected components of high-score nodes. We estimate disturbance propagation by computing per-node arrival times (first persistent exceedance), then fit a planar or time-of-arrival model to obtain direction, speed, and an epicenter proxy. With only three real events collected at decisecond resolution across U.S. cities, we evaluate the T-GCN and report time-to-detect, footprint size, and propagation consistency. We further show that short-window embeddings from the T-GCN's hidden states enable few-shot event-vs-background recognition via a simple prototypical classifier. Despite minimal data and no labels, our system yields fast, spatially coherent detection and interpretable propagation maps, offering a practical, lightweight pathway to city-scale grid resilience analytics.

Niu, Haoran [ORNL] (ORCID:0000000155228297)↗

DOE OSTI2015

Modifications to WRF's dynamical core to improve the treatment of moisture for large-eddy simulations: WRF DY-CORE MOISTURE TREATMENT

Yamaguchi and Feingold (2012) note that the cloud fields in their Weather Research and Forecasting (WRF) large-eddy simulations (LESs) of marine stratocumulus exhibit a strong sensitivity to time stepping choices. In this study, we reproduce and analyze this sensitivity issue using two stratocumulus cases, one marine and one continental. Results show that (1) the sensitivity is associated with spurious motions near the moisture jump between the boundary layer and the free atmosphere, and (2) these spurious motions appear to arise from neglecting small variations in water vapor mixing ratio (qv) in the pressure gradient calculation in the acoustic substepping portion of the integration procedure. We show that this issue is remedied in the WRF dynamical core by replacing the prognostic equation for the potential temperature θ with one for the moist potential temperature θm=θ(1+1.61qv), which allows consistent treatment of moisture in the calculation of pressure during the acoustic substeps. With this modification, the spurious motions and the sensitivity to the time stepping settings (i.e., the dynamic time step length and number of acoustic substeps) are eliminated in both of the example stratocumulus cases. This modification improves the applicability of WRF for LES applications, and possibly other models using similar dynamical core formulations, and also permits the use of longer time steps than in the original code.

Xiao, Heng↗

DOE OSTI2014

Evaluation of convection‐permitting model simulations of cloud populations associated with the Madden‐Julian Oscillation using data collected during the AMIE/DYNAMO field campaign

Abstract Regional convection‐permitting model simulations of cloud populations observed during the 2011 Atmospheric Radiation Measurement (ARM) Madden‐Julian Oscillation Investigation Experiment/Dynamics of the Madden‐Julian Oscillation Experiment (AMIE/DYNAMO) field campaign are evaluated against ground‐based radar and ship‐based observations. Sensitivity of model simulated reflectivity, surface rain rate, and cold pool statistics to variations of raindrop breakup/self‐collection parameters in four state‐of‐the‐art two‐moment bulk microphysics schemes in the Weather Research and Forecasting (WRF) model is examined. The model simulations generally overestimate reflectivity from large and deep convective cells, and underestimate stratiform rain and the frequency of cold pools. In the sensitivity experiments, introduction of more aggressive raindrop breakup or decreasing the self‐collection efficiency increases the cold pool occurrence frequency in all of the simulations, and slightly reduces the reflectivity and precipitation statistics bias in some schemes but has little effect on the overall mean surface precipitation. Both the radar observations and model simulations of cloud populations show an approximate power law relationship between convective echo‐top height and equivalent convective cell radius.

Hagos, Samson↗

DOE OSTI2022

Simulated wind speed and initial conditions over the WFIP2 region: Cold-front (D01)

The purpose of this work is to assess the sensitivity of the forecast for turbine height wind speed to initial condition (IC) uncertainties over the Columbia River Gorge and Columbia River Basin for two typical weather phenomena: a local thermal gradient induced by a marine air intrusion and passage of a cold front. The Weather Research and Forecasting (WRF) model data assimilation system (WRFDA) was used to generate ensemble ICs from the North American Regional Analysis (NARR) for the WRF model initialization. The simulated turbine-height wind speeds were categorized into four types using the self-organizing map (SOM) technique. This work advances understanding of IC uncertainties impacts on wind speed forecasts and locates the high-impact regions.

17 WIND ENERGY↗

DOE OSTI2022

Simulated wind speed and initial conditions over the WFIP2 region: Cold-front (D02)

17 WIND ENERGY↗