Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FLUORIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Shock-induced melting of [100] lithium fluoride: Sound speed and Hugoniot measurements to 230 GPa

Although [100] lithium flouride (LiF) is the most widely used optical window material in dynamic compression experiments, its high stress (>100 GPa) shock compression response, including melting, is not well understood. To address this need, we measured wave profiles in plate impact experiments to determine the Hugoniot states and longitudinal sound speeds in [100] LiF crystals shock compressed to 231 GPa. The measured peak states are fitted well by a linear shock velocity-particle velocity relation, providing an accurate determination of the LiF Hugoniot curve to significantly higher stresses than previous experiments. The longitudinal sound speeds show a near linear increase with density compression to 182 GPa. Between 182 GPa and 195 GPa, the sound speed and the longitudinal modulus decrease abruptly, due to shock-induced melting. The increasing sound speeds and moduli at higher stresses suggest that shock compressed LiF is fully liquid at 195 GPa and above, allowing determination of the Gruneisen parameter for liquid LiF. Here, the melt stress determined here differs from that predicted by current multiphase equations of state for LiF. Our results provide important insight into the high stress solid and liquid states of shock compressed LiF and point to the need for an improved multiphase equation of state at high pressures and high temperatures.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Magnetic interactions and spin dynamics in the bond-disordered pyrochlore fluoride NaCaCo 2 F 7

We report high-frequency/high-field electron spin resonance (ESR) and high-field magnetization studies on single crystals of the bond-disordered pyrochlore NaCaCo 2 F 7 . Frequency- and temperature-dependent ESR investigations above the freezing temperature T f ~ 2.4 K reveal the coexistence of two distinct magnetic phases. Here, a cooperative paramagnetic phase, evidenced by a gapless excitation mode, is found along with a spin-glass phase developing below 20 K which is associated with a gapped low-energy excitation. Effective g factors close to 2 are obtained for both modes, in line with pulsed high-field magnetization measurements which show an unsaturated isotropic behavior up to 58 T at 2 K. In order to describe the field-dependent magnetization in high magnetic fields, we propose an empirical model accounting for highly anisotropic ionic g tensors expected for this material and taking into account the strongly competing interactions between the spins which lead to a frustrated ground state. As a detailed quantitative relation between effective g factors as determined from ESR and the local g tensors obtained by neutron scattering is still sought after, our work motivates further theoretical investigations of the low-energy excitations in bond-disordered pyrochlores.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2017

First-principles simulations of warm dense lithium fluoride

Here we perform first-principles path integral Monte Carlo (PIMC) and density functional theory molecular dynamics (DFT-MD) calculations to explore warm dense matter states of LiF. Our simulations cover a wide density-temperature range of 2.08–15.70g cm -3 and 10 4 –10 9 K. Since PIMC and DFT-MD accurately treat effects of atomic shell structure, we find a pronounced compression maximum and a shoulder on the principal Hugoniot curve attributed to K-shell and L-shell ionization. The results provide a benchmark for widely used EOS tables, such as SESAME, LEOS, and models. In addition, we compute pair-correlation functions that reveal an evolving plasma structure and ionization process that is driven by thermal and pressure ionization. Finally, we compute electronic density of states of liquid LiF from DFT-MD simulations and find that the electronic gap can remain open with increasing density and temperature to at least 15.7 g cm -3 .

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2017

Real-space investigation of short-range magnetic correlations in fluoride pyrochlores NaCaCo 2 F 7 and NaSrCo 2 F 7 with magnetic pair distribution function analysis

Here, we present time-of-flight neutron total scattering and polarized neutron scattering measurements of the magnetically frustrated compounds NaCaCo 2 F 7 and NaSrCo 2 F 7 , which belong to a class of recently discovered pyrochlore compounds based on transition metals and fluorine. The magnetic pair distribution function (mPDF) technique is used to analyze and model the total scattering data in real space. We find that a previously-proposed model of short-range XY-like correlations with a length scale of 10-15 Å, combined with nearest-neighbor collinear antiferromagnetic correlations, accurately describes the mPDF data at low temperature, confirming the magnetic ground state in these materials. This model is further verified by the polarized neutron scattering data. From an analysis of the temperature dependence of the mPDF and polarized neutron scattering data, we find that short-range correlations persist on the nearest-neighbor length scale up to 200 K, approximately two orders of magnitude higher than the spin freezing temperatures of these compounds. These results highlight the opportunity presented by these new pyrochlore compounds to study the effects of geometric frustration at relatively high temperatures, while also advancing the mPDF technique and providing a novel opportunity to investigate a genuinely short-range-ordered magnetic ground state directly in real space.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

The Impact of Deposition Temperature on Sodium Fluoride Recrystallization in Cu(In,Ga)Se 2 Solar Cells

Deposited CIGS layers typically undergo a NaF post deposition treatment (PDT) to improve the electrical properties of the deposited films. Here, these NaF annealing processes can also be used to recrystallize CIGS films. To determine the effect of NaF as a fluxing agent, CIGS was deposited at varying substrate temperatures. In-situ annealing with NaF was then done to determine how the initial grain structure energy impacts recrystallization. Gallium appears to be a significant deterrent to recrystallization; the most crystallized film experienced a phase segregation between CIS and gallium containing compounds. By investigating these phase separations more, it might be feasible that a process of rapidly depositing CIGS at extremely low temperatures could create films of sufficient quality to be economically viable.

14 SOLAR ENERGY↗
DOE OSTI2015

Impact of corrosion test container material in molten fluorides

The effects of crucible material choice on alloy corrosion rates in immersion tests in molten LiF–NaF–KF (46.5–11.5-42 mol. %) salt held at 850 °C for 500 hrs are described. Four crucible materials were studied. Molten salt exposures of Incoloy-800H in graphite, Ni, Incoloy-800H, and pyrolytic boron nitride (PyBN) crucibles all led to weight-loss in the Incoloy-800H coupons. Alloy weight loss was ~30 times higher in the graphite and Ni crucibles in comparison to the Incoloy-800H and PyBN crucibles. It is hypothesized galvanic coupling between the alloy coupons and crucible materials contributed to the higher corrosion rates. Alloy salt immersion in graphite and Ni crucibles had similar weight-loss hypothesized to occur due to the rate limiting out diffusion of Cr in the alloys to the surface where it reacts with and dissolves into the molten salt, followed by the reduction of Cr from solution at the molten salt and graphite/Ni interfaces. As a result, both the graphite and the Ni crucibles provided sinks for the Cr, in the formation of a Ni–Cr alloy in the case of the Ni crucible, and Cr carbide in the case of the graphite crucible.

14 SOLAR ENERGY↗