Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “F REGION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

H2CS abundances and ortho-to-para ratios in interstellar clouds

Several H2CS ortho and para transitions have been observed toward interstellar molecular clouds, including cold, dark clouds and star-forming regions. H2CS fractional abundances f(H2CS) about 1-2 10 to the -9th relative to molecular hydrogen toward TMC-1, Orion A, and NGC 7538, and about 5 10 to the -10th for L134N are derived. The H2CS ortho-to-para ratios in TMC-1 are about 1.8 toward the cyanopolyyne peak and the ammonia peak, which may indicate the thermalization of H2CS on 10 K grains. A ratio of about 3, the statistical value, for Orion (3N, 1E) and NGC 7538 is derived, while a value of about 2 for Orion (KL) is found.

Minh, Y. C.↗

Monitoring of MLS Measurements for Ozone Data Assimilation

The ozone data assimilation system at the NASA Goddard Space Flight Center Data Assimilation Office (DAO) has operationally provided near real time global three dimensional analyzed ozone fields since December 1999. Presently, 4 system assimilates both total column ozone and profile measurements from the NOAA - 16 SBUV/2 instrument into an off-line transport model using a physical space statistical analysis scheme (PS AS). Recently, this system was modified to investigate a possible impact from including MLS profile observations. Over a period from December 13, 1991 to March 1, 1992 the system assimilated both NOAA 11 SBUV/2 profile measurements and TOMS total column measurements. Short term ozone forecasts were produced and compared to MLS observations. The resulting observed -minus -forecast (O-F) residuals were studied regionally (by both latitude bands and pressure levels) in order to explore the potential impact of MLS observations on the assimilation and sensitivity to the UARS yaw maneuver and other instrument and algorithm characteristics. In addition, MLS profiles were compared to nearest neighbor SBUV and analysis profiles. In the tropics, analyzed ozone values tend to be too high from 1-3 hPa and too low from 10-20 hPa. MLS measurements in these regions tend be lower and higher (respectively) than forecast ozone values. This indicates that assimilating MLS measurements may improve, analysis results in these areas. Further, nearest neighbor profile comparisons in the southern high latitudes indicate that laminar features present in the analysis but not present in SBUV measurements, are also present in MLS measurements. This, together with the availability of MLS measurements in polar night regions indicates that assimilating MLS measurements in polar night regions indicates that assimilating MLS measurements may improve analyzed ozone values in high latitudes.

Winslow, Nathan↗

Welding of gamma titanium aluminide alloys

An article made of a gamma titanium aluminide alloy is welded, as for example in the weld repair of surface cracks, by removing foreign matter from the area to be welded, first stress relieving the article, cooling the entire article to a welding temperature of from about 1000.degree. F. to about 1400.degree. F., welding a preselected region in an inert atmosphere at the welding temperature, and second stress relieving the article. Welding is preferably accomplished by striking an arc in the preselected region so as to locally melt the alloy in the preselected region, providing a filler metal having the same composition as the gamma titanium aluminide alloy of the article, and feeding the filler metal into the arc so that the filler metal is melted and fused with the article to form a weldment upon solidification.

Smashey, Russell W.↗

Spatially-Resolved HST GRISM Spectroscopy of a Lensed Emission Line Galaxy at Z to approximately 1

We take advantage of gravitational lensing amplification by Abell 1689 (z=0.187) to undertake the first space-based census of emission line galaxies (ELGs) in the field of a massive lensing cluster. Forty-three ELGs are identified to a flux of i(sub 775)=27.3 via slitless grism spectroscopy. One ELG (at z=0.7895) is very bright owing to lensing magnification by a factor of approx = 4.5. Several Balmer emission lines detected from ground-based follow-up spectroscopy signal the onset of a major starburst for this low-mass galaxy (M(sub star) approx = 2 x 10(exp 9)Solar Mass) with a high specific star formation rate (approx = 20/ Gyr). From the blue emission lines we measure a gas-phase oxygen abundance consistent with solar (12+log(O /H)=8.8 +/- O.2). We break the continuous line-emitting region of this giant arc into seven approx 1 kpc bins (intrinsic size) and measure a variety of metallicity dependent line ratios. A weak trend of increasing metal fraction is seen toward the dynamical center of the galaxy. Interestingly, the metal line ratios in a region offset from the center by -lkpc have a placement on the blue HI! region excitation diagram with f([OIII]/ f(H-Beta) and f([NeIII/ f(H-Beta) that can be fit by an AGN. This asymmetrical AGN-like behavior is interpreted as a product of shocks in the direction of the galaxy's extended tail, possibly instigated by a recent galaxy interaction.

Frye, Brenda L.↗

Measurement of Charmonium Production in $p + p$ and $p + d$ Interactions in the Fermilab SeaQuest Experiment

The Fermilab SeaQuest experiment has measured dimuon events from the interactions of 120GeV proton beam on liquid hydrogen and deuterium targets with dimuon mass between 2 and 9GeV. These dimuon events contain both the Drell-Yan process and the charmonium ($J/\psi$ and $\psi^\prime$) production. Unlike the Drell-Yan process which probes the antiquark distributions in the nucleons, the charmonium production is sensitive to both quark and gluon distributions. SeaQuest has extracted the $\sigma^{pd}/2\sigma^{pp}$ ratio as well as the differential cross sections for charmonium production in the kinematic region of $0.4 < x_F < 0.9$. The $\sigma^{pd}/2\sigma^{pp}$ ratio for charmonium production are found to be significantly different from that of the Drell-Yan process. The measured differential cross sections for charmonium production are compared with theoretical calculations using Color Evaporation Model and Non-Relativistic QCD model.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Introduction of oxygen vacancies and fluorine into TiO{sub 2} nanoparticles by co-milling with PTFE

Solid-state processes of introducing oxygen vacancies and transference of fluorine to n-TiO{sub 2} nanoparticles by co-milling with poly(tetrafluoroethylene) (PTFE) powder were examined by diffuse reflectance spectroscopy (DRS) of UV, visual, near- and mid-IR regions, thermal analyses (TG-DTA), energy-dispersive X-ray spectroscopy (EDXS), X-ray photoelectron spectroscopy (XPS), high-resolution transmission electron microscopy (HRTEM) and X-ray diffraction (XRD). The broad absorption peak at around 8800 cm{sup -1} (1140 nm) was attributed to the change in the electronic states, viz. electrons trapped at the oxygen vacancies (Vo) and d-d transitions of titanium ions. Incorporation of fluorine into n-TiO{sub 2} was concentrated at the near surface region and amounted to ca. 40 at% of the total fluorine in PTFE, after co-milling for 3 h, as confirmed by the F1s XPS spectrum. The overall atomic ratio, F/Ti, determined by EDXS was 0.294. By combining these analytical results, a mechanism of the present solid state processes at the boundary between PTFE and n-TiO{sub 2} was proposed. The entire process is triggered by the partial oxidative decomposition of PTFE. This is accompanied by the abstraction of oxygen atoms from the n-TiO{sub 2} lattices. Loss of the oxygen atoms results in the formation of the diverse states of locally distorted coordination units of titania, i.e. TiO{sub 6-n}Vo{sub n}, located at the near surface region. This leads subsequent partial ligand exchange between F and O, to incorporate fluorine preferentially to the near surface region of n-TiO{sub 2} particles, where local non-crystalline states predominate. - Graphical abstract: Scheme of the reaction processes: (a) pristine mixture, (b) oxygen abstraction from TiO{sub 2} and (c) fluorine migration from PTFE to TiO{sub 2}. Highlights: Transfer of fluorine from PTFE to n-TiO{sub 2} in a dry solid state process was confirmed. Black-Right-Pointing-Pointer 40% of F in PTFE was incorporated to the near surface region of n-TiO{sub 2} nanoparticles. Black-Right-Pointing-Pointer The transfer process is triggered by the oxidative decomposition of PTFE. Black-Right-Pointing-Pointer Fluorine incorporation is mediated by the formation of oxygen vacancies. Black-Right-Pointing-Pointer The sequential mechanisms are verified by XPS, EDXS, HRTEM, TG and DRS.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ionospheric nf sub H resonances: Frequency shifts versus plasma conditions

The Alouette 2 resonances observed near the harmonics of the electron cyclotron frequency f sub H reveal frequency shifts (relative to the n(f sub H) values derived from model field calculations) which can be interpreted in terms of plasma wave dispersion effects. These effects are observed on the 2(f sub H) resonance when it is near the resonance observed close to the upper hybrid frequency f sub T. The observations suggest that an oblique echo model may be required to give a proper interpretation of the 2(f sub H) resonance. Cyclotron damping can be ignored only when the angle between the propagation vector and the direction perpendicular to the earth's magnetic field B is less than a few degrees for the 2(f sub H) wave, and less than a few tenths of a degree for the n(f sub H) waves with n 2. The negative offset of the absolute value of B inferred from the plasma resonance observations is consistent with expectations based on recent OGO 3 and OGO 5 rubidium magnetometer observations at higher altitudes in the equatorial regions.

Benson, R. F.↗

CHLORINE ABUNDANCES IN COOL STARS

Chlorine abundances are reported in 15 evolved giants and 1 M dwarf in the solar neighborhood. The Cl abundance was measured using the vibration-rotation 1-0 P8 line of H{sup 35}Cl at 3.69851 μ m. The high-resolution L -band spectra were observed using the Phoenix infrared spectrometer on the Kitt Peak Mayall 4 m telescope. The average [{sup 35}Cl/Fe] abundance in stars with −0.72 < [Fe/H] < 0.20 is [{sup 35}Cl/Fe] = (−0.10 ± 0.15) dex. The mean difference between the [{sup 35}Cl/Fe] ratios measured in our stars and chemical evolution model values is (0.16 ± 0.15) dex. The [{sup 35}Cl/Ca] ratio has an offset of ∼0.35 dex above model predictions, suggesting that chemical evolution models are underproducing Cl at the high metallicity range. Abundances of C, N, O, Si, and Ca were also measured in our spectral region and are consistent with F and G dwarfs. The Cl versus O abundances from our sample match Cl abundances measured in planetary nebula and H ii regions. In one star where both H{sup 35}Cl and H{sup 37}Cl could be measured, a {sup 35}Cl/{sup 37}Cl isotope ratio of 2.2 ± 0.4 was found, consistent with values found in the Galactic ISM and predicted chemical evolution models.

79 ASTRONOMY AND ASTROPHYSICS↗

On the Nature and Extent of Optically Thin Marine low Clouds

Macrophysical properties of optically thin marine low clouds over the nonpolar oceans (60 deg S-60 deg N) are measured using 2 years of full-resolution nighttime data from the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP). Optically thin clouds, defined as the subset of marine low clouds that do not fully attenuate the lidar signal, comprise almost half of the low clouds over the marine domain. Regionally, the fraction of low clouds that are optically thin (f(sub thin,cld)) exhibits a strong inverse relationship with the low-cloud cover, with maxima in the tropical trades (f(sub thin,cld) greater than 0.8) and minima in regions of persistent marine stratocumulus and in midlatitudes (f(sub thin,cld) less than 0.3). Domain-wide, a power law fit describes the cloud length distribution, with exponent beta = 2.03 +/- 0.06 (+/-95% confidence interval). On average, the fraction of a cloud that is optically thin decreases from approximately 1 for clouds smaller than 2 km to less than 0.3 for clouds larger than 30 km. This relationship is found to be independent of region, so that geographical variations in the cloud length distribution explain three quarters of the variance in f(sub thin,cld). Comparing collocated trade cumulus observations from CALIOP and the airborne High Spectral Resolution Lidar reveals that clouds with lengths smaller than are resolvable with CALIOP contribute approximately half of the low clouds in the region sampled. A bounded cascade model is constructed to match the observations from the trades. The model shows that the observed optically thin cloud behavior is consistent with a power law scaling of cloud optical depth and suggests that most optically thin clouds only partially fill the CALIOP footprint.

Leahy, L. V.↗

Phenomenological Implications of Heavy Axion Models

Several models predict the existence of heavy (mass{approx}MeV or so) pseudoscalar (axion-like) particles. This possibility is permitted only if the relation between the axion mass and the Peccei-Quinn constant is relaxed.Here we consider a possible phenomenological consequence of these models. After being produced in the supernova core, these heavy axions would escape and a fraction of them would decay into photons before reaching the earth. We calculated the expected spectrum of these photons from the supernovae SN1987A and CAS A, in terms of the axion mass and the Peccei-Quinn constant f{sub a}, and compared our results to the data from the FERMI Large Area Telescope. The analysis provides strong constraints on the allowed region in the axion parameter space for 100 keV < or approx. m{sub a} < or approx. 1 GeV. This mass region is completely excluded unless f{sub a}>10{sup 112} GeV. For axion masses {approx}100 MeV, the constraint is stronger f{sub a}> a few 10{sup 14} GeV.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Global Assessment of the SMAP Level-4 Soil Moisture Product Using Assimilation Diagnostics

The Soil Moisture Active Passive (SMAP) mission Level-4 Soil Moisture (L4_SM) product provides 3-hourly, 9-km resolution, global estimates of surface (0-5 cm) and root-zone (0-100 cm) soil moisture and related land surface variables from 31 March 2015 to present with approx. 2.5-day latency. The ensemble-based L4_SM algorithm assimilates SMAP brightness temperature (Tb) observations into the Catchment land surface model. This study describes the spatially distributed L4_SM analysis and assesses the observation-minus-forecast (O-F) Tb residuals and the soil moisture and temperature analysis increments. Owing to the climatological rescaling of the Tb observations prior to assimilation, the analysis is essentially unbiased, with global mean values of approx. 0.37 K for the O-F Tb residuals and practically zero for the soil moisture and temperature increments. There are, however, modest regional (absolute) biases in the O-F residuals (under approx. 3 K), the soil moisture increments (under approx. 0.01 cu m/cu m), and the surface soil temperature increments (under approx. 1 K). Typical instantaneous values are approx. 6 K for O-F residuals, approx. 0.01 (approx. 0.003) cu m/cu m for surface (root-zone) soil moisture increments, and approx. 0.6 K for surface soil temperature increments. The O-F diagnostics indicate that the actual errors in the system are overestimated in deserts and densely vegetated regions and underestimated in agricultural regions and transition zones between dry and wet climates. The O-F auto-correlations suggest that the SMAP observations are used efficiently in western North America, the Sahel, and Australia, but not in many forested regions and the high northern latitudes. A case study in Australia demonstrates that assimilating SMAP observations successfully corrects short-term errors in the L4_SM rainfall forcing.

Reichle, Rolf↗

Using Data Assimilation Diagnostics to Assess the SMAP Level-4 Soil Moisture Product

The Soil Moisture Active Passive (SMAP) mission Level-4 Soil Moisture (L4_SM) product provides 3-hourly, 9-km resolution, global estimates of surface (0-5 cm) and root-zone (0-100 cm) soil moisture and related land surface variables from 31 March 2015 to present with approx.2.5-day latency. The ensemble-based L4_SM algorithm assimilates SMAP brightness temperature (Tb) observations into the Catchment land surface model. This study describes the spatially distributed L4_SM analysis and assesses the observation-minus-forecast (O-F) Tb residuals and the soil moisture and temperature analysis increments. Owing to the climatological rescaling of the Tb observations prior to assimilation, the analysis is essentially unbiased, with global mean values of approx. 0.37 K for the O-F Tb residuals and practically zero for the soil moisture and temperature increments. There are, however, modest regional (absolute) biases in the O-F residuals (under approx. 3 K), the soil moisture increments (under approx. 0.01 cu m/cu m), and the surface soil temperature increments (under approx. 1 K). Typical instantaneous values are approx. 6 K for O-F residuals, approx. 0.01 (approx. 0.003) cu m/cu m for surface (root-zone) soil moisture increments, and approx. 0.6 K for surface soil temperature increments. The O-F diagnostics indicate that the actual errors in the system are overestimated in deserts and densely vegetated regions and underestimated in agricultural regions and transition zones between dry and wet climates. The O-F auto-correlations suggest that the SMAP observations are used efficiently in western North America, the Sahel, and Australia, but not in many forested regions and the high northern latitudes. A case study in Australia demonstrates that assimilating SMAP observations successfully corrects short-term errors in the L4_SM rainfall forcing.

SMAP↗

Alkali-metal/alkaline-earth-metal fluorine beryllium borate NaSr{sub 3}Be{sub 3}B{sub 3}O{sub 9}F{sub 4} with large nonlinear optical properties in the deep-ultraviolet region

The linear optical response and second harmonic generation (SHG) in alkali-metal/alkaline-earth-metal fluorine beryllium borate NaSr{sub 3}Be{sub 3}B{sub 3}O{sub 9}F{sub 4} are investigated by means of density functional theory. Calculations are performed using four types of exchange correlations: Ceperley-Alder local density approximation, Perdew Burke and Ernzerhof general gradient approximation, Engel-Vosko generalized gradient approximation, and the recently modified Becke-Johnson potential (mBJ). The mBJ approach brings the calculated band gap (7.20 eV) in excellent agreement with the experimental one (7.28 eV). The calculated values of the uniaxial anisotropy δε=−0.076 and the birefringence Δn(0)=0.052 indicate considerable anisotropy in the linear optical properties, which makes it favorable for the second harmonic generation. The dominant component of the second harmonic generation is χ{sub 111}{sup (2)}(ω). The value of |χ{sub 111}{sup (2)}(ω)| is about 1.2 pm/V at λ = 1064 nm in agreement with previous calculations. To analyze the origin of the high SHG of NaSr{sub 3}Be{sub 3}B{sub 3}O{sub 9}F{sub 4} single crystals, we have correlated the features of |χ{sub 111}{sup (2)}(ω)| spectra with the features of ε{sub 2}(ω) spectra as a function of ω/2 and ω. From the calculated dominant component |χ{sub 111}{sup (2)}(ω)|, we find that the microscopic first hyperpolarizability, β{sub 111}, the vector components along the dipole moment direction is 0.5 × 10{sup −30} esu at static limit and 0.6 × 10{sup −30} esu at λ = 1064 nm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Application of linear stability theory in laminar flow design

The linear stability of fully three-dimensional supersonic boundary layers formed over swept-wing configurations is investigated using a modified version of the linear stability code COSAL. Configurations studied include a highly swept leading-edge model to be utilized for transition studies in the LARC Low-disturbance Mach 3.5 Pilot Tunnel. The model is a representation of the leading edge of a laminar flow control wing for the F-16XL aircraft. In addition, the region over a laminar flow control glove fitted on the midportion of an F-16XL wing was studied. For each configuration, estimates of the location of the onset of transition were computed using linear stability theory and the e exp N method. The effectiveness of suction in stabilizing the boundary layer over the F-16XL wing glove was also investigated.

Iyer, Venkit↗

The Interaction of Vinculin with Actin

Vinculin can interact with F-actin both in recruitment of actin filaments to the growing focal adhesions and also in capping of actin filaments to regulate actin dynamics. Using molecular dynamics, both interactions are simulated using different vinculin conformations. Vinculin is simulated either with only its vinculin tail domain (Vt), with all residues in its closed conformation, with all residues in an open I conformation, and with all residues in an open II conformation. The open I conformation results from movement of domain 1 away from Vt; the open II conformation results from complete dissociation of Vt from the vinculin head domains. Simulation of vinculin binding along the actin filament showed that Vt alone can bind along the actin filaments, that vinculin in its closed conformation cannot bind along the actin filaments, and that vinculin in its open I conformation can bind along the actin filaments. The simulations confirm that movement of domain 1 away from Vt in formation of vinculin 1 is sufficient for allowing Vt to bind along the actin filament. Simulation of Vt capping actin filaments probe six possible bound structures and suggest that vinculin would cap actin filaments by interacting with both S1 and S3 of the barbed-end, using the surface of Vt normally occluded by D4 and nearby vinculin head domain residues. Simulation of D4 separation from Vt after D1 separation formed the open II conformation. Binding of open II vinculin to the barbed-end suggests this conformation allows for vinculin capping. Three binding sites on F-actin are suggested as regions that could link to vinculin. Vinculin is suggested to function as a variable switch at the focal adhesions. The conformation of vinculin and the precise F-actin binding conformation is dependent on the level of mechanical load on the focal adhesion.

59 BASIC BIOLOGICAL SCIENCES↗

Magnetic Flux Emergence and Decay Rates for Preceder and Follower Sunspots Observed with HMI

We quantify the emergence and decay rates of preceder (p) and follower (f) sunspots within 10 active regions from 2010 to 2014 using Space-weather Helioseismic Magnetic Imager Active Region Patch data. The sunspots are small to mid-sized regions and contain a signed flux within a single polarity sunspot of (1.1--6.5)×10{sup 21} Mx. The net unsigned flux within the regions, including plage, ranges from (5.1--20)×10{sup 21} Mx. Rates are calculated with and without intensity contours to differentiate between sunspot formation and flux emergence. Signed flux emergence rates, calculated with intensity contours, for the p (f) spots average 6.8(4.9)×10{sup 19} Mx hr{sup −1}, while decay rates are −1.9(−3.4)×10{sup 19} Mx hr{sup −1}. The mean, signed flux emergence rate of the regions, including plage, is 7.1×10{sup 19} Mx hr{sup −1}, for a mean peak flux of 5.9×10{sup 21} Mx. Using a synthesis of these results and others reported previously, there is a clear trend for larger flux regions to emerge faster than smaller ones. Observed emergence rates (dϕ/dt, Mx hr{sup −1}) scale with total signed peak flux, ϕ-tilde {sub max}, as a power law with an exponent of 0.36, i.e., dϕ/dt=A ϕ-tilde {sub max}{sup 0.36}. The observed rates may assist in constraining the boundary and initial conditions in simulations which already demonstrate increased rates for flux tubes with higher buoyancy and twist, or in the presence of a strong upflow. Overall, the observed emergence rates are smaller than those in simulations, which may indicate a slower rise of the flux in the interior than what is captured in simulations.

79 ASTRONOMY AND ASTROPHYSICS↗

First-principles study of crystal and electronic structure of rare-earth cobaltites

Using density functional theory plus self-consistent Hubbard U (DFT + U{sub sc}) calculations, we have investigated the structural and electronic properties of the rare-earth cobaltites RCoO{sub 3} (R = Pr – Lu). Our calculations show the evolution of crystal and electronic structure of the insulating low-spin RCoO{sub 3} with increasing rare-earth atomic number (decreasing ionic radius), including the invariance of the Co-O bond distance (d{sub Co–O}), the decrease of the Co-O-Co bond angle (Θ), and the increase of the crystal field splitting (Δ{sub CF}) and band gap energy (E{sub g}). Agreement with experiment for the latter improves considerably with the use of DFT + U{sub sc} and all trends are in good agreement with the experimental data. These trends enable a direct test of prior rationalizations of the trend in spin-gap associated with the spin crossover in this series, which is found to expose significant issues with simple band based arguments. We also examine the effect of placing the rare-earth f-electrons in the core region of the pseudopotential. The effect on lattice parameters and band structure is found to be small, but distinct for the special case of PrCoO{sub 3} where some f-states populate the middle of the gap, consistent with the recent reports of unique behavior in Pr-containing cobaltites. Overall, this study establishes a foundation for future predictive studies of thermally induced spin excitations in rare-earth cobaltites and similar systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A statistical analysis of developing knock intensity in a mixture with temperature inhomogeneities

Knock formation and its intensity for a stoichiometric ethanol/air mixture under a representative end-gas auto-ignition condition in IC engines with temperature inhomogeneities are investigated using multi-dimensional direct numerical simulations (DNS) with a 40-species skeletal mechanism of ethanol. Two- and three-dimensional simulations are performed by systematically varying temperature fluctuations and its most energetic length scale, l T . The volumetric fraction of the mixture regions that have the propensity to detonation development, F D , is proposed as a metric to predict the amplitude of knock intensity. It is found that with increasing l T , F D shows a good agreement with the heat release fraction of the mixture regions with pressure greater than equilibrium pressure, F H . The detonation peninsula is well captured by F D and F H when plotting them as a function of the volume-averaged ξ, ξ, (ξ= a/S sp is the ratio of the acoustic speed, a to the ignition front speed, S sp ) Decreasing l T is found to significantly reduce the super-knock intensity. The results suggest that decreasing l T , as in engines with tumble designs resulting in a smaller turbulence scale, will be effective in mitigating the the super-knock development.

42 ENGINEERING↗