Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Er”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Reappraisal of solid selective emitters

New rare earth oxide emitters show greater efficiency than previous emitters. As a result, based on a simple model the efficiency of these emitters was calculated. Results indicate that the emission band of the selective emitter must be at relatively low energy (less than or equal to .52 eV) to obtain maximum efficiency at moderate emitter temperatures (less than or equal to 1500 K). Thus, low bandgap energy PV materials are required to obtain an efficient thermophotovoltaic (TPV) system. Of the 4 specific rare earths (Nd, Ho, Er, Yb) studied, Ho has the largest efficiency at moderate temperatures (72 percent at 1500 K). A comparison was made between a selective emitter TPV system and a TPV system that uses a thermal emitter plus a band pass filter to make the thermal emitter behave like a selective emitter. Results of the comparison indicate that only for very optimistic filter and thermal emitter properties will the filter TPV system have a greater efficiency than the selective emitter system.

Chubb, Donald L.↗
NASA NTRS1991

The MAMS Quick View System-2 (QVS2) - A workstation for NASA aircraft scanner data evaluation

This paper describes a ground-based data-evaluation workstation named Quick View System-2 (QVS2) developed to support postflight evaluation of data supplied by the Multispectral Atmospheric Mapping Sensor (MAMS), one of the four spectrometers that can be used with the Daedalus scanner flown on the ER-2 aircraft. The QVS2 provides advanced analysis capabilities and can be applied to other airborne scanners used throughout NASA for earth-system-science investigations, because of the commonality in the data stream and in the generalized data structure.

Jedlovec, Gary J.↗
NASA NTRS1992

Pseudomorphic Single-Quantum-Well Lasers Emit At 980 Nm

Narrow-stripe semiconductor lasers emitting at 980 nm include pseudomorphic In0.2Ga0.8As/GaAs/AlxGa1-xAs graded-index-of-refraction, separate-confinement-heterostructure single quantum well(GRINSCH SQW) with overlaid ridge waveguide. 980 nm chosen as one that yields most efficient pumping because there is no absorption in excited states at this wavelength. Suitable for pumping Er(Sup3+)-doped optical-fiber amplifiers in optical-fiber communication systems and optical phased-array ranging systems.

Larsson, Anders↗
NASA NTRS1990

Radiative flux measurements in the stratosphere

The objective is to determine how the stratospheric tropospheric exchange of water vapor is affected by the interaction of solar (visible) and planetary (infrared) radiation with tropical cumulonimbus anvils. This research involves field measurements from the ER-2 aircraft as well as radiative transfer modelling to determine heating and cooling rates and profiles that directly affect the exchange between the troposphere and the stratosphere.

Valero, Francisco P. J.↗
NASA NTRS1990

In situ ozone measurements for the airborne arctic stratospheric experiment

The research provided in-situ ozone measurements onboard the NASA Ames DC-8 research aircraft during the 1989 Airborne Arctic Stratospheric Experiment. The Ames DC-8 and ER-2 aircraft performed extensive sampling of the Arctic stratosphere and troposphere in a program designed to study those factors important in ozone depletion in the Arctic during times when the polar vortex and meteorology are conducive to the formation of polar stratospheric clouds and/or an Arctic ozone hole. The DC-8 ozone instrument complement included in-situ measurements for H2O, NO, NO2, NO(y) gas, NO(y) particulate, as well as remote sensors for measuring the vertical distribution and column density of ozone above the aircraft altitude. The in-situ data (ozone, water vapor, and nitrogen species) at the aircraft altitude provide a definition of tropospheric conditions in the vicinity of the polar vortex and polar stratospheric clouds. Defining tropospheric conditions will assist in the understanding of the chemistry of both stratosphere and troposphere and the extent to which polar stratospheric clouds affect the chemistry of transported air.

Gregory, Gerald L.↗
NASA NTRS1990

Data analysis and archival

The purpose of this task is the acquisition, distribution, archival, and analysis of data collected during and in support of the Upper Atmospheric Research Program (UARP) field experiments. Meteorological and U2 data from the 1984 Stratosphere-Troposphere Exchange Project (STEP) was analyzed to determine characteristics of internal atmospheric waves. CDROM's containing data from the 1987 STEP, 1987 Airborne Antarctic Ozone Expedition (AAOE), and the 1989 Airborne Arctic Stratospheric Expedition (AASE) were produced for archival and distribution of those data sets. The AASE CDROM contains preliminary data and a final release is planned for February 1990. Comparisons of data from the NASA ER-2 Meteorological Measurement System (MMS) with radar tracking and radiosonde data show good agreement. Planning for a Meteorological Support Facility continues. We are investigating existing and proposed hardware and software to receive, manipulate, and display satellite imagery and standard meteorological analyses, forecasts, and radiosonde data.

Danielsen, Edwin F.↗
NASA NTRS1991

NASA/USRA high altitude research aircraft. Gryphon: Soar like an eagle with the roar of a lion

At the equator, the ozone layer ranges from 65,000 to 130,000+ feet. This is beyond the capabilities of the ER-2, which is NASA's current high altitude reconnaissance aircraft. The Universities Space Research Association, in cooperation with NASA, is sponsoring an undergraduate program which is geared to designing an aircraft that can study the ozoned layer at the equator. This aircraft must be able to satisfy four mission profiles. Mission one is a polar mission which ranges from Chile to the South Pole and back to Chile, a total range of 6000 n. mi. at 100,000 feet with a 2500 lb. payload. The second mission is also a polar mission with a decreased altitude of 70,000 feet and an increased payload of 4000 lb. For the third mission, the aircraft will take-off at NASA Ames, cruise at 100,000 feet carrying a 2500 lb. payload, and land in Puerto Montt, Chile. The final mission requires the aircraft to take-off at NASA Ames, cruise at 100,000 feet with a 1000 lb. payload, make an excursion to 120,000 feet, and land at Howard AFB, Panama. All three missions require that a subsonic Mach number be maintained due to constraints imposed by the air sampling equipment. The aircraft need not be manned for all four missions. Three aircraft configurations were determined to be the most suitable for meeting the above requirements. The performance of each configuration is analyzed to investigate the feasibility of the project requirements. In the event that a requirement can not be obtained within the given constraints, recommendations for proposal modifications are given.

Rivera, Jose↗
NASA NTRS1991

The HAMMER: High altitude multiple mission environmental researcher

At the equator, the ozone layer ranges from 65,000 to 130,000+ feet which is beyond the capabilities of the ER-2, NASA's current high altitude reconnaissance aircraft. The Universities Space Research Association, in cooperation with NASA, is sponsoring an undergraduate program which is geared to designing an aircraft that can study the ozone layer at the equator. This aircraft must be able to satisfy four mission profiles. Mission one is a polar mission which ranges from Chile to the South Pole and back to Chile, a total range of 6000 n. mi. at 100,000 feet with a 2500 lb. payload. The second mission is also a polar mission with a decreased altitude of 70,000 feet and an increased payload of 4000 lb. For the third mission, the aircraft will take-off at NASA Ames, cruise at 100,000 feet carrying a 2500 lb. payload, and land in Puerto Montt, Chile. The final mission requires the aircraft to take-off at NASA Ames, cruise at 100,000 feet with a 1000 lb. payload, make an excursion to 120,000 feet, and land at Howard AFB, Panama. All three missions require that a subsonic Mach number is maintained due to constraints imposed by the air sampling equipment. The aircraft need not be manned for all four missions. Three aircraft configurations were determined to be the most suitable for meeting the above requirements. The performance of each configuration is analyzed to investigate the feasibility of the project requirements. In the event that a requirement can not be obtained within the given constraints, recommendations for proposal modifications are given.

Hayashi, Darren↗
NASA NTRS1991

Properties of large area ErBa2Cu3O(7-x) thin films deposited by ionized cluster beams

ErBa2Cu3O(7-x) films have been produced by simultaneous deposition of Er, Ba, and Cu from three ionized cluster beam (ICB) sources at acceleration voltages of 0.3 to 0.5 kV. Combining ozone oxidation with ICB deposition at 650 C eliminated any need of post annealing processing. The substrates were rotated at 10 rotations per minute during the deposition which took place at a rate of about 3 to 4 nm. Films with areas up to 70 mm in diameter have been made by ICB deposition. These films, 100 nm thick, were deposited on SrTiO3 (100) substrates at 650 C in a mixture of six percent O3 in O2 at a total pressure of 4 x 10(exp -4) Torr. They had T(sub c) ranging from 84.3 K to 86.8 K over a 70 mm diameter and J(sub c) above 10(exp 6) A/sq cm at 77 K. X ray diffraction measurements of the three samples showed preferential c-axis orientation normal to the substrate surface. Scanning electron micrographs (SEM) of the three samples also show some texture dependence on sample position. For the three samples, there is a correlation between SEM texture, full width at half-maximum of rocking curves and J(sub c) versus temperature curves.

Levenson, L. L.↗
NASA NTRS1992

Effects of low Earth orbit environment on the Long Duration Exposure Facility thermal control coatings

One of the benefits of the Long Duration Exposure Facility (LDEF) was the opportunity to study the before and after effects of low earth orbit space environment on the spacecraft thermal control coatings. Since the LDEF's thermal control was totally passive by design, the selection of the external surface absorptivity to emissivity ratio (alpha/epsilon) and the ability for the coating to retain the alpha/epsilon over time was an important consideration in the thermal design of the LDEF. The primary surface coating chosen for the LDEF structure was clear chromic anodized aluminum with an average design alpha/epsilon of 0.32/0.16. External surface absorptivity (alpha) and emissivity (epsilon) were measured on all intercostals, longerons, tray mounting flanges, thermal control panels, and a limited number of experiment surface coatings after the experiment trays were removed from the LDEF structure. All surface alpha/epsilon measurements were made using portable hand held infrared and solar spectrum reflectometers. The absorptivity measurements were taken with a Devices and Services SSR-ER version 5.0 solar spectra reflectometer which has a stated uncertainty of +/- 0.01, and all normal emissivity measurements were made using the Gier Dunkle DB-100 infrared reflectometer also with a stated uncertainty of +/- 0.01. Both instruments were calibrated in the laboratory by LaRC instrumentation personnel before being used in the field at KSC. A combined total of 733 measurements were taken on the anodized aluminum hardware which included the structure (intercostals, longerons, and center ring), earth and space end thermal control panels, and experiment tray mounting flanges. The facility thermal control coatings measured in this survey cover 33 percent of the total exposed LDEF surface area. To correlate low earth orbit environmental effects on the anodized coatings, measurements were taken in both exposed and unexposed surfaces and compared to quality assurance (QA) measurements taken on the new surfaces at the time of hardware fabrication in 1978. The results of investigation are presented.

Sampair, Thomas R.↗
NASA NTRS1992

Modeling radiation forces acting on TOPEX/Poseidon for precision orbit determination

Geodetic satellites such as GEOSAT, SPOT, ERS-1, and TOPEX/Poseidon require accurate orbital computations to support the scientific data they collect. Until recently, gravity field mismodeling was the major source of error in precise orbit definition. However, albedo and infrared re-radiation, and spacecraft thermal imbalances produce in combination no more than a 6-cm radial root-mean-square (RMS) error over a 10-day period. This requires the development of nonconservative force models that take the satellite's complex geometry, attitude, and surface properties into account. For TOPEX/Poseidon, a 'box-wing' satellite form was investigated that models the satellite as a combination of flat plates arranged in a box shape with a connected solar array. The nonconservative forces acting on each of the eight surfaces are computed independently, yielding vector accelerations which are summed to compute the total aggregate effect on the satellite center-of-mass. In order to test the validity of this concept, 'micro-models' based on finite element analysis of TOPEX/Poseidon were used to generate acceleration histories in a wide variety of orbit orientations. These profiles are then compared to the box-wing model. The results of these simulations and their implication on the ability to precisely model the TOPEX/Poseidon orbit are discussed.

Marshall, J. A.↗
NASA NTRS1992

Effect of atmospheric extinction on laser rangefinder performance at 1.54 and 0.6 microns

Extinction of laser rangefinder (LRF) pulses by the atmosphere depends on the wavelength, weather conditions, and aerosol concentration along the optical path. In the IR, extinction is due to absorption by molecular constituents and scattering and absorption by aerosols. The total atmospheric extinction alpha(lambda) is the sum of the molecular and aerosol contributions, alpha(sub m)(lambda)and Alpha(sub a)(lambda). We present simple expressions for alpha(sub m)(lambda) and alpha(sub a)(lambda) for two LRF sources: Er:glass and CO2 which operate at 1.54 and 10.6 microns, respectively. The expressions are based on accepted models of atmospheric aerosols and molecular extinction and give an estimate of alpha(lambda) as a function of standard meteorological parameters, assuming horizontal beam propagation. Signal-to-noise ratios of LRF returns, measured from a reference target under different weather conditions are compared to predictions based on the estimate of alpha(lambda).

Hutt, D. L.↗
NASA NTRS1992

A study of atmospheric optical scattering parameters at 1.5 and 2 micron region for solid state Doppler lidar applications

The increasing interest in the development of an eye-safe, solid state, Doppler lidar for avionic applications has created the need for a quantitative evaluation of atmospheric effects on performance. Theoretical calculations were completed for optical scattering parameters to be compared with the field measurements. Computer codes were developed for the required calculations and designed to be interactive and user friendly in order to support comparison with experimental results and, thus, provide the basis for evaluation of eye-safe Doppler lidar over a wide range of atmospheric conditions and geographical locations. A holmium Doppler lidar operating at 2.09 microns was constructed for atmospheric backscattering, attenuation, and wind velocity measurements. Theoretical calculations and field studies were performed for backscatter coefficients. The selected wavelengths correspond to Er:glass, Tm:YAG, and Tm,Ho:YAG solid state lasers that are suitable for use in an eye-safe Doppler lidar system.

Margalit, Eli↗
NASA NTRS1990

Type I polar stratospheric cloud particles - Concentration, shape, size, light extinction

Results from the flight on January 24, 1989 of the Airborne Arctic Stratospheric Experiment during which the ER-2 aircraft transitioned from unsaturated to ice saturated air at 20 km altitude are presented. Aerosol particles were sampled by wire impactors and examined for number density as a function of particle size by taking photomicrographs in a scanning electron microscope and visually sizing and counting the particles. Differences in the chemical, physical and optical properties of stratospheric aerosol between ice-saturated and nonsaturated air are described.

Pueschel, R. F.↗
NASA NTRS1990

Radiative heating rates in the tropical monsoon environment - A case study

A study designed to investigate the radiative impact of high clouds through a combination of modeling and data analysis is presented. A series of high-altitude survey flights was conducted utilizing a NASA Ames ER-2 aircraft carrying a nadir-viewing narrow field-of-view radiometer, with channels at 6.5 and 10.5 microns. The two intensities obtained by this radiometer can be employed to deduce optical depth as described by Liou et. al. (1990).

Heffernan, C. M.↗
NASA NTRS1990

Radiative heating rates during AAOE and AASE

Radiative transit computations of heating rates utilizing data from the 1987 Airborne Antarctic Ozone Experiment (AAOE) (Tuck et al., 1989) and the 1989 Airborne Arctic Stratospheric Experiment (AASE) (Turco et al., 1990) are described. Observed temperature and ozone profiles and a radiative transfer model are used to compute the heating rates for the Southern Hemisphere during AAOE and the Northern Hemisphere during AASE. The AASE average cooling rates computed inside the vortex are in good agreement with the diabatic cooling rates estimated from the ER-2 profile data for N2O for the AASE period (Schoeberl et al., 1989).

Rosenfield, Joan E.↗
NASA NTRS1990

Microphysical and radiative characteristics of convective clouds during COHMEX

The microphysical structure and the evolution of two strong isolated thunderstorms that occurred on July 11, 1986 in northern Alabama were investigated using data obtained during the Cooperative Huntsville Meteorological Experiment by CP-2 multiparameter radar, together with passive microwave measurements from ER-2 aircraft. A correlation was found between the magnitude of the microwave T(B) depression and the storm intensity, although a clear relationship was not always obvious between radar-deduced microphysical characteristics and passive microwave radiative observations.

Fulton, Richard↗