Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electron diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Synthesis and crystal structure characterization of InGaZnO{sub 4} with a new defect structure

Single crystals of InGaZnO{sub 4} were synthesized in a sealed Pt-tube at elevated temperatures under normal pressure without flux. InGaZnO{sub 4} has a trigonal crystal system (R3{sup ¯}m; No. 166) deduced from convergent beam electron diffraction (CBED). Single crystal structure refinement from XRD data at −150 °C (a=3.275(1) Å; c=25.99(1) Å; Z=3) revealed an alternate stacking of InO{sub 6/3}{sup −} and (Ga,Zn)O{sub 4/4}{sup +} layers, iso-structural to YbFe{sub 2}O{sub 4}. The cell parameters at room temperature were refined from powder X-ray diffraction data (a=3.284(3) Å and c=26.037(3) Å). The transparent crystals have a gray-bluish color and exhibit an excess of Ga expressed by the cation ratio of In:Ga:Zn=30.2(9):39(1):31(1) determined by energy dispersive X-ray spectroscopy (EDXS). While the isovalent substitution of In{sup 3+} by Ga{sup 3+} is known, an additional aliovalent substitution of Zn{sup 2+} by Ga{sup 3+} is observed. This results in the formula (In{sub 0.9}Ga{sub 0.1})Ga{sub 1.06}Zn{sub 0.91}□{sub 0.03}O{sub 4} where 3% of the cations in 4+1 coordination are vacant due to aliovalent substitution. Further evidence of that defect structure is found in the lattice parameter a which is substantially smaller than in stoichiometric InGaZnO{sub 4}, as well as in the strong absorption in the near-IR from transitions correlated with the defect structure. The bluish color of the crystals is due to an enhanced absorption in the red of the visible spectrum. For the first time, we achieved to image InGaZnO{sub 4} at atomic resolution in the electron microscope proving a perfect periodic stacking of atomic layers. - Graphical abstract: Single crystals of InGaZnO{sub 4} have been synthesized at ambient pressure and analyzed with X-ray diffraction, electron microscopy, and optical absorption. Optical band gap and optical transmission have been determined. - Highlights: • Preparation of single crystals of InGaO{sub 3}(ZnO){sub 1} at ambient pressure for the first time. • Non-stoichiometric compound (In{sub 0.9}Ga{sub 0.1})Ga{sub 1.06}Zn{sub 0.91}□{sub 0.03}O{sub 4} with defect structure, excess of Ga, depletion of Zn. • Real structure of InGaO{sub 3}(ZnO){sub 1} imaged by high resolution TEM for the first time. • Optical band gap and transmission of InGaO{sub 3}(ZnO){sub 1} single crystal.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Epitaxial growth of (111)-oriented LaAlO{sub 3}/LaNiO{sub 3} ultra-thin superlattices

The epitaxial stabilization of a single layer or superlattice structures composed of complex oxide materials on polar (111) surfaces is severely burdened by the reconstructions at the interface that commonly arise to neutralize the polarity. We report on the synthesis of high quality LaNiO{sub 3}/mLaAlO{sub 3} pseudo cubic (111) superlattices on polar (111)-oriented LaAlO{sub 3}, the proposed complex oxide candidate for a topological insulating behavior. Comprehensive X-Ray diffraction measurements, reflection high energy electron diffraction, and element specific resonant X-ray absorption spectroscopy affirm their high structural and chemical quality. The study offers an opportunity to fabricate interesting interface and topology controlled (111)-oriented superlattices based on ortho-nickelates.

36 MATERIALS SCIENCE↗

Thermal stability of titanate nanorods and titania nanowires formed from titanate nanotubes by heating

The structure of titanate nanowires was studied by a combination of powder X-ray diffraction (XRD) and 3D precession electron diffraction. Titania nanowires and titanate nanorods were prepared by heating of titanate nanotubes. The structure of final product depended on heating conditions. Titanium nanotubes heated in air at a temperature of 850 °C decomposed into three phases — Na{sub 2}Ti{sub 6}O{sub 13} (nanorods) and two phases of TiO{sub 2} — anatase and rutile. At higher temperatures the anatase form of TiO{sub 2} transforms into rutile and the nanorods change into rutile nanoparticles. By contrast, in the vacuum only anatase phases of TiO{sub 2} were obtained by heating at 900 °C. The anatase transformation into rutile began only after a longer time of heating at 1000 °C. For the description of anisotropic XRD line broadening in the total powder pattern fitting by the program MSTRUCT a model of nanorods with elliptical base was included in the software. The model parameters — rod length, axis size of the elliptical base, the ellipse flattening parameter and twist of the base could be refined. Variation of particle shapes with temperature was found. - Highlights: • Titanate nanotubes changed to particles of TiO{sub 2} and nanorods of Na{sub 2}Ti{sub 6}O{sub 13} at 850 °C. • With heating time and temperature nanorods transformed to rutile nanoparticles. • X-ray diffraction powder pattern fitting indicated an elliptical shape of nanorod base. • No transition of titanate nanotubes to Na{sub 2}Ti{sub 6}O{sub 13} was found after heating in vacuum. • Heating of titanate nanotubes in vacuum leads to appearance of anatase nanowires.

36 MATERIALS SCIENCE↗

In situ study of self-assembled GaN nanowires nucleation on Si(111) by plasma-assisted molecular beam epitaxy

Nucleation of GaN nanowires grown by plasma-assisted molecular beam epitaxy is studied through a combination of two in situ tools: grazing incidence x-ray diffraction and reflection high energy electron diffraction. Growth on bare Si(111) and on AlN/Si(111) is compared. A significantly larger delay at nucleation is observed for nanowires grown on bare Si(111). The difference in the nucleation delay is correlated to a dissimilarity of chemical reactivity between Al and Ga with nitrided Si(111).

36 MATERIALS SCIENCE↗

Combining MicroED and native mass spectrometry for structural discovery of enzyme–small molecule complexes

With the goal of accelerating the discovery of small molecule–protein complexes, we leverage fast, low-dose, event-based electron counting microcrystal electron diffraction (MicroED) data collection and native mass spectrometry. This approach, which we term electron diffraction with native mass spectrometry (ED-MS), allows assignment of protein target structures bound to ligands with data obtained from crystal slurries soaked with mixtures of known inhibitors and crude biosynthetic reactions. This extends to libraries of printed ligands dispensed directly onto TEM grids for later soaking with microcrystal slurries, and complexes with noncovalent ligands. ED-MS resolves structures of the natural product, epoxide-based cysteine protease inhibitor E-64, and its biosynthetic analogs bound to the model cysteine protease, papain. It further identifies papain binding to its preferred natural products, by showing that two analogs of E-64 outcompete others in binding to papain crystals, and by detecting papain bound to E-64 and an analog from crude biosynthetic reactions, without purification. ED-MS also resolves binding of the CTX-M-14 β-lactamase, a target of active drug development, to the non-β-lactam inhibitor, avibactam, alone or in a cocktail of unrelated compounds. These results illustrate the utility of ED-MS for natural product ligand discovery and for structure-based screening of small molecule binders to macromolecular targets, promising utility for drug discovery.

MicroED↗

Enhanced Functionality for Materials Analysis in the DTEM

The recent explosion in the use of pump–probe studies on the picosecond timescale to investigate structural and electronic phase transitions and the dynamics of chemical reactions has been based largely on laser–induced reactions coupled with laser interrogation techniques, or on laser induced reactions coupled with synchrotron radiation interrogation techniques. Much less attention has been given to approaches based on laser–induced (or electron–beam–induced) reactions coupled with electron interrogation methods, despite the fact that electron sources are brighter, and their interactions with matter stronger (thereby giving higher signal levels). The use of electrons as probes has great potential to study complex transient events not only because of the possible high temporal resolution using ultrafast electron diffraction (UED) but also the potential for high spatial resolution using dynamic transmission electron microscopy (DTEM). Taking this potential of electron interrogation methods and turning it into a routine nanoscale characterization technique requires several key aspects of the instrumentation used for electron microscopy/diffraction to be optimized. In this proposal, several approaches to instrument optimization for DTEM and UED (to be performed in the same instrument) will be addressed. The new instrumentation developments will be used to study the dynamics of strongly driven materials, aging and corrosion in structural materials, as well as the nanoscale structural properties of other materials systems. In addition to providing new instrument capabilities (the technology for which will be transferred to the DTEM at Lawrence Livermore National Laboratory (LLNL)) and fundamental insights into the dynamic properties of materials, the interaction between 3 universities (University of California-Davis, University of Illinois at Chicago and Arizona State University) and 2 national laboratories (LLNL and Sandia National Laboratory) will help train the next generation of students in areas of relevance to the stockpile stewardship.

36 MATERIALS SCIENCE↗

Second order incommensurate phase transition in 25L-Ta{sub 2}O{sub 5}

A new structural state 25L-Ta{sub 2}O{sub 5}, obtained from sintering and annealing treatments of a Ta{sub 2}O{sub 5} powder, is identified both by electron diffraction and high resolution imaging on a transmission electron microscope (TEM). According to general rules for the different L-Ta{sub 2}O{sub 5} structures proposed by Grey et al. (J. Solid State Chem. 178 (2005) 3308), a structural model is derived from their crystallographic data on 19L-Ta{sub 2}O{sub 5}. This model yields simulated images in agreement with high resolution TEM observations of the structure oriented along its [001] zone axis, but only for a very thin crystal thickness of less than 1.2 nm. Such a limitation is shown to be due to a modulation of the structure along its [001] axis. Actually, from an analysis of a diffuse scattering and of its evolution into satellites reflections as a function of the cooling rate, a second order incommensurate phase transition can be assumed to occur in this compound. The property of single phase samples observed by TEM is also verified by X-ray powder diffraction. In a discussion about studies performed by different authors on incommensurate structures in the system Ta{sub 2}O{sub 5}-WO{sub 3}, it is noticed that TEM results, similar to ours, indicate that phase transitions could be expected in these structures. - Graphical Abstract: Electron diffraction patterns of [100] zone axis, showing a structural change of the 25L-Ta{sub 2}O{sub 5} phase through a variation of the cooling rate from 1000 {sup o}C.

36 MATERIALS SCIENCE↗

Synthesis and structure of a new layered oxyfluoride Sr{sub 2}ScO{sub 3}F with photocatalytic property

Highlights: • A new oxyfluoride compound Sr{sub 2}ScO{sub 3}F was prepared by a solid state route. • The structure of this compound was determined by GSAS program based on XRD data. • The photocatalytic property was investigated under UV irradiation. - Abstract: A new Ruddlesden–Popper type scandium oxyfluoride, Sr{sub 2}ScO{sub 3}F, was synthesized by a conventional solid state reaction route. The detailed structure of Sr{sub 2}ScO{sub 3}F was investigated using X-ray diffraction (XRD) and selected area electron diffraction (SAED). The disorder distribution pattern of fluorine anions was determined by the {sup 19}F nuclear magnetic resonance (NMR) spectrum. The compound crystallizes in a K{sub 2}NiF{sub 4}-type tetragonal structure (space group I4/mmm) with O/F anions disordered over the apical sites of the perovskite-type Sc(O,F){sub 6} octahedron layers interleaved with strontium cations. Ultraviolet–visible (UV–vis) diffuse reflection spectrum of the prepared Sr{sub 2}ScO{sub 3}F indicates that it has an absorption in the UV–vis region. The photocatalytic activity of Sr{sub 2}ScO{sub 3}F was further investigated, showing an effective photodegradation of Rhodamine-B (RB) within 2 h under UV light irradiation.

36 MATERIALS SCIENCE↗

Fabrication of single crystalline, uniaxial single domain Co nanowire arrays with high coercivity

Whilst Co nanorods with high coercivity were synthesized during recent years, they did not achieve the same results as for Co nanowires embedded in solid templates. In the present work, Co nanowire arrays (NWAs) with high coercivity were successfully fabricated in porous aluminum oxide template under optimum conditions by using pulsed ac electrodeposition technique. Magnetic properties and crystalline characteristics of the nanowires were investigated by hysteresis loop measurements, first-order reversal curve (FORC) analysis, X-ray diffraction (XRD), and selected area electron diffraction (SAED) patterns. Hysteresis loop measurements showed high coercivity of about 4.8 kOe at room temperature together with optimum squareness of 1, resulting in an increase of the previous maximum coercivity for Co NWAs up to 45%. XRD and SAED patterns revealed a single crystalline texture along the [0002] direction, indicating the large magnetocrystalline anisotropy. On the other hand, FORC analysis confirmed a single domain structure for the Co NWAs. In addition, the reversal mechanism of the single crystalline, single domain Co NWAs was studied which resulted in the fixed easy axis with a coherent rotation. Accordingly, these nanowires might offer promising applications in high density bit patterned media and low power logic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Origins of ferromagnetism in transition-metal doped Si

We present results of the magnetic, structural, and chemical characterizations of Mn{sup +}-implanted Si displaying n-type semiconducting behavior and ferromagnetic ordering with Curie temperature, T{sub C}, well above room temperature. The temperature-dependent magnetization measured by superconducting quantum interference device from 5 to 800 K was characterized by three different critical temperatures (T{sub C}*{approx}45 K, T{sub C1}{approx}630-650 K, and T{sub C2}{approx}805-825 K). Their origins were investigated using dynamic secondary ion mass spectroscopy and transmission electron microscopy (TEM) techniques, including electron energy loss spectroscopy, Z-contrast scanning TEM imaging, and electron diffraction. We provided direct evidences of the presence of a small amount of Fe and Cr impurities which were unintentionally doped into the samples together with the Mn{sup +} ions as well as the formation of Mn-rich precipitates embedded in a Mn-poor matrix. The observed T{sub C}* is attributed to the Mn{sub 4}Si{sub 7} precipitates identified by electron diffraction. Possible origins of T{sub C1} and T{sub C2} are also discussed. Our findings raise questions regarding the origin of the high-T{sub C} ferromagnetism reported in many material systems without a careful chemical analysis.

36 MATERIALS SCIENCE↗

Determination of shape anisotropy in embedded low contrast submonolayer quantum dot structures

We describe a procedure for the morphological characterization of hard-to-image submonolayer quantum dot structures. This procedure employs high resolution x-ray diffraction based reciprocal space mapping, accompanied by rigorous diffraction modeling for precise determination of the morphology of submonolayer quantum dots. Our modelling results and experimental data clearly show that the investigated quantum dots are anisotropically elongated along the [110] orientation. Complementary polarization dependent photoluminescence measurements, combined with our previously reported magneto-photoluminescence data, confirm this conclusion. Our formalism enables direct extraction of structural information of complex embedded three-dimensional structures, which, due to their low electron density contrast with respect to the surrounding host matrix, cannot be readily investigated by traditional electron diffraction techniques.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structure and charge ordering behavior of the colossal magnetoresistive manganite Nd{sub 0.5}Sr{sub 0.5}MnO{sub 3}

The structure and charge ordering (CO) behavior of the three-dimensional colossal magnetoresistive manganite Nd{sub 0.5}Sr{sub 0.5}MnO{sub 3} have been studied by transmission electron microscopy. The electron diffraction analysis suggested its room temperature structure as orthorhombic, with a Pnma space group. By controlling the experimental temperature setting either above or below the CO transition temperature, it was observed that the CO grew through the propagation of the CO front. The twin boundaries were the barriers of the CO front movement. In heavily ion irradiated samples, it was observed that the CO front was pinned by the intracrystalline defects, forming a zigzag shape interface. Moreover, the electron beam was observed to influence the CO.

36 MATERIALS SCIENCE↗

Synthesis and structure of high-quality films of copper polyphthalocyanine – 2D conductive polymer

Graphical abstract: - Highlights: • 2D polymers show a big promise for science and technology. • We develop a new procedure for the direct synthesis of copper polyphthalocyanine. • We obtain reliable experimental data on the CuPPC structure. • With the support of quantum chemical calculations we describe electronic structure of CuPPC. - Abstract: Copper polyphthalocyanine (CuPPC), a 2D conjugated polymer, is a promising material for electronics and photovoltaics, but its applications were hindered by a poor processability. We propose an experimental approach, by which thin films of CuPPC, can be directly synthesized in a chemical vapor deposition (CVD) set-up at mild temperature (420 °C). High polymerization degree and high crystallinity of the films were confirmed by TEM, FTIR and UV–vis studies. From XRD and TEM electron diffraction, we conclude that the polymer has AA layer stacking with the inter-layer distance of 0.32 nm. The assignment of X-ray and TEM diffraction patterns was based on quantum-chemical calculations. Based on the latter, we also discuss electronic structure and conclude that CuPPC is rather a semi-metal than semi-conductor.

36 MATERIALS SCIENCE↗

Silicate-free growth of high-quality ultrathin cerium oxide films on Si(111)

Ultrathin Ce{sub 2}O{sub 3} layers have been grown on Si(111) by reactive metal deposition in an oxygen background and characterized by x-ray standing waves, x-ray diffraction, x-ray photoelectron spectroscopy, and low-energy electron diffraction to elucidate and quantify both atomic structure and chemical composition. It is demonstrated that highly ordered, mostly B-oriented, epitaxial ceria films can be achieved by preadsorption of a monolayer of atomic chlorine, effectively passivating the substrate and thereby suppressing cerium silicate and silicon oxide formation at the interface.

36 MATERIALS SCIENCE↗

Determination of the five parameter grain boundary character distribution of nanocrystalline alpha-zirconium thin films using transmission electron microscopy

Grain boundary engineering and other fundamental materials science problems (e.g., phase transformations and physical properties) require an improvement in the understanding of the type and population of grain boundaries in a given system – yet, databases are limited in number and spare in detail, including for hcp crystals such as zirconium. One way to rapidly obtain databases to analyze is to use small-grained materials and high spatial resolution orientation microscopy techniques, such as ASTAR™/precession electron diffraction. To demonstrate this, a study of grain boundary character distributions was conducted for α-zirconium deposited at room temperature on fused silica substrates using physical vapor deposition. The orientation maps of the nanocrystalline thin films were acquired by the ASTARα/precession electron diffraction technique, a new transmission electron microscope based orientation microscopy method. The reconstructed grain boundaries were classified as pure tilt, pure twist, 180°-twist and 180°-tilt grain boundaries based on the distribution of grain boundary planes with respect to the angle/axis of misorientation associated with grain boundaries. The results of the current study were compared to the results of a similar study on α-titanium and the molecular dynamics results of grain boundary energy for α-titanium.

36 MATERIALS SCIENCE↗

Differential evolution: Global search problem in LEED-IV surface structural analysis

The search process associated with the quantitative theory–experiment comparison in Low Energy Electron Diffraction surface structural analysis can be very time consuming, especially in the case of complex materials with many atoms in the unit cell. Global search algorithms need to be employed to locate the global minimum of the reliability factor in the multi-dimensional structural parameter space. In this study we investigate the use of the Differential Evolution algorithm in Low Energy Electron Diffraction structural analysis. Despite the simplicity of its mechanism the Differential Evolution algorithm presents an impressive performance when applied to ultra-thin films of BaTiO{sub 3}(001) in a theory–theory comparison. A scaling relation of N{sup (1.47} {sup ±} {sup 0.08)} was obtained, where N is the total number of parameters to be optimized. - Highlights: • We investigated the use of the Differential Evolution algorithm (DE) for the LEED search problem. • The DE method was applied to the optimization of the surface structure of the BaTiO{sub 3}(001) ultra-thin films. • A very favorable scaling relation of N{sup 1.47} was obtained, where N is the total number of parameters to be optimized.

36 MATERIALS SCIENCE↗

Improving Electrocatalysts for O2 Reduction by Fine-Tuning the Pt-Support Interaction: Pt Monolayer on the Surfaces of a Pd3Fe(111) Single-Crystal Alloy

We improved the effectiveness of Pt monolayer electrocatalysts for the oxygen-reduction reaction (ORR) using a novel approach to fine-tuning the Pt monolayer interaction with its support, exemplified by an annealed Pd{sub 3}Fe(111) single-crystal alloy support having a segregated Pd layer. Low-energy ion scattering and low-energy electron diffraction studies revealed that a segregated Pd layer, with the same structure as Pd (111), is formed on the surface of high-temperature-annealed Pd{sub 3}Fe(111). This Pd layer is considerably more active than Pd(111); its ORR kinetics is comparable to that of a Pt(111) surface. The enhanced catalytic activity of the segregated Pd layer compared to that of bulk Pd apparently reflects the modification of Pd surface's electronic properties by underlying Fe. The Pd{sub 3}Fe(111) suffers a large loss in ORR activity when the subsurface Fe is depleted by potential cycling (i.e., repeated excursions to high potentials in acid solutions). The Pd{sub 3}Fe(111) surface is an excellent substrate for a Pt monolayer ORR catalyst, as verified by its enhanced ORR kinetics on PT{sub ML}/Pd/Pd{sub 3}Fe(111). Our density functional theory studies suggest that the observed enhancement of ORR activity originates mainly from the destabilization of OH binding and the decreased Pt-OH coverage on the Pt/Pd/Pd{sub 3}Fe(111) surface. The activity of Pt{sub ML}/Pd(111) and Pt(111) is limited by OH removal, whereas the activity of Pt{sub ML}/Pd/Pd{sub 3}Fe(111) is limited by the O-O bond scission, which places these two surfaces on the two sides of the volcano plot.

30 DIRECT ENERGY CONVERSION↗

Structural evolution of small ruthenium cluster anions

The structures of ruthenium cluster anions have been investigated using a combination of trapped ion electron diffraction and density functional theory computations in the size range from eight to twenty atoms. In this size range, three different structural motifs are found: Ru{sub 8}{sup −}–Ru{sub 12}{sup −} have simple cubic structures, Ru{sub 13}{sup −}–Ru{sub 16}{sup −} form double layered hexagonal structures, and larger clusters form close packed motifs. For Ru{sub 17}{sup −}, we find hexagonal close packed stacking, whereas octahedral structures occur for Ru{sub 18}{sup −}–Ru{sub 20}{sup −}. Our calculations also predict simple cubic structures for the smaller clusters Ru{sub 4}{sup −}–Ru{sub 7}{sup −}, which were not accessible to electron diffraction measurements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗