Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electrical conductivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Metal (Cu,Al)/CNT Composite Wires for Energy Efficient Motors

This report summarizes the main results of research project on Metal/CNT nanocomposites conducted at University of Central Florida (UCF). It should be noted that the project was budgeted for three years, but the budget period 3 was unfortunately not funded and conducted in COVID19 pandemic years due to many reasons. The demonstration plan on the small motors was also removed according to the discussion with the DOE program manager. All research activities were focused on the (Cu,Al)/CNT material development and wire extrusion. Existing methods to fabricate Metal/CNTs were usually suffering from agglomeration of CNTs due to their density and stiffness differences. A new method is studied by the UCF research team, where CNTs are surface treated firstly, then coated with pure metals (i.e., Al, Cu, and Nickle). The metal encapsulation on CNT is expected to significantly improve the interfacial bonding between CNTs and the intimated metal matrices. The coated CNT powders were used to make sample materials through sintering, then a customized wire extrusion process was employed to fabricate wires. Measurement of material property improvements in mechanical strength, thermal conductivity, and electrical conductivity were conducted on both cylinder samples and extruded wires. In addition to the sintering process, casting on metal coated CNT powder was also investigated. The best results we achieved are summarized as follows. (1) The measured thermal conductivity of Al/CNT composite made with Ni-encapsulated CNTs and pure Al powders is about 85% better than that of pure aluminum fabricated. The measured electrical conductivity of fabricated Al/CNT is about 14-20% better than that of pure aluminum. (2) The measured electrical conductivity of Cu/CNT is about 14.5% better than that of pure copper fabricated. (3) The mechanical strengths of both Cu/CNT and Al/CNT (with about 1% wt. CNTs) are 70% better than pure metals although losing some material ductility. (4) Two-stage wire extrusion at high temperatures were designed and successfully conducted to fabricate wires of Metal/CNTs.

36 MATERIALS SCIENCE↗

Passive safety device and internal short tested method for energy storage cells and systems

A passive safety device for an energy storage cell for positioning between two electrically conductive layers of the energy storage cell. The safety device also comprising a separator and a non-conductive layer. A first electrically conductive material is provided on the non-conductive layer. A first opening is formed through the separator between the first electrically conductive material and one of the electrically conductive layers of the energy storage device. A second electrically conductive material is provided adjacent the first electrically conductive material on the non-conductive layer, wherein a space is formed on the non-conductive layer between the first and second electrically conductive materials. A second opening is formed through the non-conductive layer between the second electrically conductive material and another of the electrically conductive layers of the energy storage device. The first and second electrically conductive materials combine and exit at least partially through the first and second openings to connect the two electrically conductive layers of the energy storage device at a predetermined temperature.

25 ENERGY STORAGE↗

Experimental determination of phonon thermal conductivity and Lorenz ratio of single crystal metals: Al, Cu, and Zn

We use a magnetothermal resistance method to measure lattice thermal conductivity of pure single crystal metals over the intermediate temperature range of 5–60 K. Large transverse magnetic fields are applied to suppress electronic thermal conduction. The total thermal conductivity and the electrical conductivity are measured as functions of applied magnetic field. The lattice thermal conductivity is then extracted by extrapolating the thermal conductivity versus electrical conductivity curve at zero electrical conductivity. We used this method to experimentally measure the lattice thermal conductivity and Lorenz number in single crystal Al (100), Cu (100), and Zn (001) in the intermediate temperature range. Our results show that the measured phonon thermal conductivity versus temperature plot has a peak around ΘD/10, and the Lorenz number is found to deviate from the Sommerfeld value in the intermediate temperature range.

Yao, Mengliang↗

Multiphonon: Phonon Density of States tools for Inelastic Neutron Scattering Powder Data

The multiphonon python package calculates phonon density of states, a reduced representation of vibrational property of condensed matter (see, for example, Section “Density of Normal Modes” in Chapter 23 “Quantum Theory of the Harmonic Crystal” of (Ashcroft and Mermin 2011)), from inelastic neutron scattering (see, for example (B. Fultz et al. 2006–2016)) spectrum from a powder sample. Inelastic neutron spectroscopy (INS) is a probe of excitations in solids of vibrational or magnetic origins. In INS, neutrons can lose(gain) energy to(from) the solid in the form of quantized lattice vibrations – phonons. Measuring phonon density of states is usually the first step in determining the phonon properties of a material experimentally. Phonons play a very important role in understanding the physical properties of a solid, including thermal conductivity and electrical conductivity. Hence, INS is an important tool for studying thermoelectric materials (Budai et al. 2014, Li et al. (2015)), where low thermal conductivity and high electrical conductivity are desired. Study of phonon entropy also made important contributions to the research of thermal dynamics and phase stability of materials (B. Fultz 2010, bogdanoff2002phonon, swan2006vibrational).

36 MATERIALS SCIENCE↗

The microstructure network and thermoelectric properties of bulk (Bi,Sb){sub 2}Te{sub 3}

We report small-angle neutron scattering studies on the microstructure network in bulk (Bi,Sb){sub 2}Te{sub 3} synthesized by the melt-spinning (MS) and the spark-plasma-sintering (SPS) process. We find that rough interfaces of multiscale microstructures generated by the MS are responsible for the large reduction of both lattice thermal conductivity and electrical conductivity. Our study also finds that subsequent SPS forms a microstructure network of {approx}10 nm thick lamellae and smooth interfaces between them. This nanoscale microstructure network with smooth interfaces increases electrical conductivity while keeping a low thermal conductivity, making it an ideal microstructure for high thermoelectric efficiency.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrical Transport Experiments at High Pressure

High-pressure electrical measurements have a long history of use in the study of materials under ultra-high pressures. In recent years, electrical transport experiments have played a key role in the study of many interesting high pressure phenomena including pressure-induced superconductivity, insulator-to-metal transitions, and quantum critical behavior. High-pressure electrical transport experiments also play an important function in geophysics and the study of the Earth's interior. Besides electrical conductivity measurements, electrical transport experiments also encompass techniques for the study of the optoelectronic and thermoelectric properties of materials under high pressures. In addition, electrical transport techniques, i.e., the ability to extend electrically conductive wires from outside instrumentation into the high pressure sample chamber have been utilized to perform other types of experiments as well, such as high-pressure magnetic susceptibility and de Haas-van Alphen Fermi surface experiments. Finally, electrical transport techniques have also been utilized for delivering significant amounts of electrical power to high pressure samples, for the purpose of performing high-pressure and -temperature experiments. Thus, not only do high-pressure electrical transport experiments provide much interesting and valuable data on the physical properties of materials extreme compression, but the underlying high-pressure electrical transport techniques can be used in a number of ways to develop additional diagnostic techniques and to advance high pressure capabilities.

58 GEOSCIENCES↗

The Shubnikov-de Haas effect and thermoelectric properties of Tl-doped Sb{sub 2}Te{sub 3} and Bi{sub 2}Se{sub 3}

The influence of doping with Tl on the Shubnikov-de Haas effect at T = 4.2 K in magnetic fields up to 38 T in p-Sb{sub 2−x}Tl{sub x}Te{sub 3} (x = 0, 0.005, 0.015, and 0.05) and n-Bi{sub 2−x}Tl{sub x}Se{sub 3} (x = 0, 0.01, 0.02, 0.04, and 0.06) single crystals is investigated. Extreme cross-sections of the Fermi surface in both materials decrease upon doping with Tl: the hole concentration decreases in Sb{sub 2−x}Tl{sub x}Te{sub 3} due to the donor effect of Tl and the electron concentration in n-Bi{sub 2−x}Tl{sub x}Se{sub 3} decreases due to the acceptor effect of Tl. The temperature dependences of the Seebeck coefficient, electrical conductivity, thermal conductivity, and dimensionless thermoelectric figure of merit in a temperature range of 77–300 K are measured. The thermal conductivity and electrical conductivity decrease upon doping with Tl both in p-Sb{sub 2−x}Tl{sub x}Te{sub 3} and in n-Bi{sub 2−x}Tl{sub x}Se{sub 3}. The Seebeck coefficient increases in all compositions upon an increase in doping over the entire measured temperature range. The thermoelectric figure of merit increases upon doping with Tl.

36 MATERIALS SCIENCE↗

Thermoelectric properties of p-type Ag{sub 1−x}(Pb{sub 1−y}Sn{sub y}){sub m}Sb{sub 1−z}Te{sub m+2}

The thermoelectric properties of Ag{sub 1−x}(Pb{sub 1−y}Sn{sub y}){sub m}Sb{sub 1−z}Te{sub m+2} (4≤m≤16, −0.1≤x≤0.3, 1/3≤y≤2/3, 0.2≤z≤0.4; Lead Antimony Silver Tellurium Tin, LASTT-m) compositions were investigated in the temperature range of 300 to ~670 K. All samples crystallize in the average NaCl-type structure without any noticeable second phase and exhibit very narrow bandgaps of <0.1 eV. We studied a range of m values, silver concentrations (x), Pb/Sn ratios (y), and antimony concentrations (z) to determine their effects on the thermoelectric properties. The samples were investigated as melt grown polycrystalline ingots. Varying the Ag contents, the Pb/Sn ratios, and the Sb contents off-stoichiometry allowed us to control the electrical conductivity, the Seebeck coefficient, and the thermal conductivity. The electrical conductivity tends to decrease with decreasing m values. The highest ZT of ~1.1 was achieved at ~660 K for Ag{sub 0.9}Pb{sub 5}Sn{sub 5}Sb{sub 0.8}Te{sub 12} mainly due to the very low lattice thermal conductivity of ~0.4 W/(m K) around 660 K. Also, samples with charge-balanced stoichiometries, Ag(Pb{sub 1−y}Sn{sub y}){sub m}SbTe{sub m+2}, were studied and found to exhibit a lower power factor and higher lattice thermal conductivity than the Ag{sub 1−x}(Pb{sub 1−y}Sn{sub y}){sub m}Sb{sub 1−z}Te{sub m+2} compositions. - Graphical abstract: The Ag{sub 1−x}(Pb{sub 1−y}Sn{sub y}){sub m}Sb{sub 1−z}Te{sub m+2} system defines a complex and flexible class of tunable thermoelectric class of materials with high performance.

36 MATERIALS SCIENCE↗

High Performance Circuit Pastes for Solid Oxide Fuel Cell Applications: Final Technical Report

Using a combination of in-plane electrical conductivity measurements, electrical contact resistance measurements, tensile fracture tests, double shear lap fracture tests, rapid thermal cycling adhesion tests, in situ wetting angle measurements, 3D X-ray tomography, reduction-oxidation (RedOx) cycling, scanning electron microscopy (SEM), energy dispersive x-ray spectroscopy (EDAX), Density Functional Theory (DFT) modeling, Molecular Dynamics (MD) modeling, and Phase Field modeling, this project determined that a new brazing technique developed by the PIs (specifically the use of nickel particles to direct the wetting and spreading of molten silver) could be used to produce well-adhered, >97% dense, electrically-conductive circuits, current collectors, and/or electrical contacts on a variety of ceramic and ceramic-coated substrates (specifically lanthanum strontium manganite, yttria stabilized zirconia, sapphire, Cr2O3-passivated stainless steel, and Al2O3-passivated stainless steel). Compared to other silver-based alternatives, Ag:Ni led to less manufacturing defects and was more tolerant of the extreme environments (isothermal high-temperature aging) and occasional abuse (rapid thermal cycling and RedOx cycling) encountered during Solid Oxide Fuel Cell and/or Solid Oxide Electrolysis Cell operation. Further, in some situations (such as when to produce Ag:Ni electrical contacts to Al2O3-protected stainless steel) the Ni particles also improved operation by acting as chemical getters that removed electrically-insulating, surface-segregating substrate impurities (i.e. by lowering the contact resistance with the underlying substrate).

36 MATERIALS SCIENCE↗

Development of novel graphene and carbon nanotubes based multifunctional polymer matrix composites

This paper investigates strategies to alter the nano-and-microstructures of carbon-based filler-reinforced polymer matrix composites (PMCs). The matrix materials being studied in this work include polyphenylene sulfide (PPS) and liquid crystal polymer (LCP). A set of experiments were performed to investigate various strategies (i) to fabricate a morphological structure within the polymer matrix; (ii) to develop a thermally and electrically conductive network of nano-scaled fillers; and (iii) to produce a thermally conductive but electrically insulative network of hybrid fillers of nano-and-micro scales. The PMCs' structure-to-property relationships, including electrical and thermal properties, were revealed. In particular, the composites' effective thermal conductivities could be increased by as much as 10-folded over the neat polymers. By structuring the embedded electrically conductive pathways in the PMCs, their electrical conductivities could be tailored to levels that ranged from those of electrical insulators to those of semi-conductors. These multifunctional carbon-based filler-reinforced PMCs are envisioned to be potential solutions of various engineering problems. For example, light-weight thermally conductive PMCs with tailored electrical conductivities can serve as a new family of materials for electronic packaging or heat management applications.

36 MATERIALS SCIENCE↗

Flexible neural interfaces with integrated stiffening shank

A neural interface includes a first dielectric material having at least one first opening for a first electrical conducting material, a first electrical conducting material in the first opening, and at least one first interconnection trace electrical conducting material connected to the first electrical conducting material. A stiffening shank material is located adjacent the first dielectric material, the first electrical conducting material, and the first interconnection trace electrical conducting material.

36 MATERIALS SCIENCE↗

Flexible neural interfaces with integrated stiffening shank

A neural interface includes a first dielectric material having at least one first opening for a first electrical conducting material, a first electrical conducting material in the first opening, and at least one first interconnection trace electrical conducting material connected to the first electrical conducting material. A stiffening shank material is located adjacent the first dielectric material, the first electrical conducting material, and the first interconnection trace electrical conducting material.

36 MATERIALS SCIENCE↗

Synthesis and thermoelectric properties of Bi{sub 2}O{sub 2}Se nanosheets

Graphical abstract: Sheet-like Bi{sub 2}O{sub 2}Se is synthesized by composite-molten-salt (CMS) method. The film made from the as-synthesized Bi{sub 2}O{sub 2}Se nanosheets show very low thermal conductivity and high electrical conductivity. - Highlights: • Bi{sub 2}O{sub 2}Se nanosheets are synthesized by the composite-molten-salt approach. • Thermoelectric properties of a film consisting of Bi{sub 2}O{sub 2}Se are investigated. • The film shows very low thermal conductivity and high electrical conductivity. - Abstract: The pure tetragonal bismuth oxiselenide nanosheets are synthesized by the composite-molten-salt approach at 200 °C. Field emission scanning electron microscopy, X-ray diffraction, and energy dispersive X-ray spectroscopy are used to characterize the structure, morphology, and composition of the sample. The results show that the thickness of the nanosheets is about 120 nm. The sample for thermoelectric property measurements is prepared using cold pressing method. Thermoelectric properties, including electrical conductivity, Seebeck coefficient and thermal conductivity, are measured from room temperature to 470 K. The results show that the sample exhibits n-type semiconductor behavior with low thermal conductivity (κ{sub 300} = 0.346 Wm{sup −1} K{sup −1}, and κ{sub 470} = 0.458 Wm{sup −1} K{sup −1}). Although the obtained figure of merit is small, it would be enhanced with increase in temperature.

36 MATERIALS SCIENCE↗

Aligned van der Waals Coupled Growth of Carbon Nanotubes to Hexagonal Boron Nitride

Abstract 1D carbon nanotubes (CNTs) are grown on hexagonal boron nitride (hBN) surfaces. The nanotubes show clear preference to align to specific crystal directions of the hBN substrate. Raman spectra confirm that the nanotubes consist of sp 2 carbon, while nanomanipulation shows that they are van der Waals coupled to the underlying hBN substrate. Scanning conductance and electric force microscopy show that the CNTs have significantly greater electrical conductance compared to the hBN. This integrated aligned growth of materials with similar lattices, yet having dissimilar dimensionality and electrical conducting properties, provides a promising route to achieving intricate nanoscale electrical circuits on high‐quality insulating substrates.

Nasseri, Mohsen↗

Transient tropospheric electric fields resulting from sudden changes in ionospheric conductivity

Electric field mapping in the earth's atmosphere has been a research subject for more than 20 years. The present paper is concerned with the downward mapping of an ionospheric electric field into the troposphere following a 'sudden' - change in the atmospheric conductivity profile. The formulation is limited to the case of a static magnetic field which is vertical to the earth's surface. The obtained results are, therefore, most applicable at high latitudes. It is assumed that the 'sudden' change occurs within a fraction of a second and is sustained for a time of the order of at least several seconds. It is pointed out that such changes in ionospheric conductivity can occur as a result of sudden solar particle events (SPE) or particle precipitation into the lower ionosphere. Attention is given to theory, electric field calculations, and the obtained results.

Dejnakarintra, M.↗

Discharge phenomena associated with a preheated wire explosion in vacuum: Theory and comparison with experiment

This paper presents the experimental and simulation results of electrical explosions of preheated tungsten wires at a current rise time of several tens of nanoseconds and at a current density of {approx}10{sup 8} A/cm{sup 2}. The electrical characteristics of wire explosion (WE) were measured. The image of a wire during the electrical explosion was obtained with the help of a framing camera. The proposed magnetohydrodynamic (MHD) model takes into account different stages of WE, namely, the wire heating and vaporization, the phase transition, and the shunting discharge. Two different mathematical approaches were used for WE simulation at different stages. At the first stage, the simulation included a code describing the wire state. At the second stage, the shunting discharge was simulated together with the wire state. The simulation code includes the set of MHD equations, the equilibrium equation of state (density and temperature-dependent pressure and specific internal energy), electron transport models (density and temperature-dependent electrical conductivity and thermal conductivity), and electric circuit equations. Thermionic emission and vapor ionization initiate the plasma layer, which develops around the wire core and supports the shunting discharge. The calculated waveforms of the wire voltage and current, as well as the velocity of the expanding plasma, are in a good agreement with the experimental data.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Semiconducting glasses: A new class of thermoelectric materials?

The deeper understanding of the factors that affect the dimensionless figure of merit, ZT, and the use of new synthetic methods has recently led to the development of novel systems with improved thermoelectric performances. Albeit up to now with ZT values lower than the conventional bulk materials, semiconducting glasses have also emerged as a new family of potential thermoelectric materials. This paper reviews the latest advances on semiconducting glasses for thermoelectric applications. Key examples of tellurium-based glasses, with high Seebeck coefficients, very low thermal conductivities and tunable electrical conductivities, are presented. ZT values as high as 0.2 were obtained at room temperature for several tellurium-based glasses with high copper concentrations, confirming chalcogenide semiconducting glasses as good candidates for high-performance thermoelectric materials. However, the temperature stability and electrical conductivity of the reported glasses are still not good enough for practical applications and further studies are still needed to enhance them. - Graphical abstract: Power factor as a function of the temperature for the Cu{sub 27.5}Ge{sub 2.5}Te{sub 70} and Cu{sub 30}As{sub 15}Te{sub 55} seniconducting glasses. Highlights: Black-Right-Pointing-Pointer A review of semiconducting glasses for thermoelectrics applications is presented. Black-Right-Pointing-Pointer The studied semiconducting glasses present very low thermal conductivities. Black-Right-Pointing-Pointer Composition can tune electrical conductivity and Seebeck coefficient. Black-Right-Pointing-Pointer ZT=0.2 is obtained at 300 K for different semiconducting glasses.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of sulfur doping on thermoelectric properties of tin selenide – A first principles study

In this work we present the thermoelectric properties of tin selenide (SnSe) and sulfur doped tin selenide(SnSe{sub (1-x)}S{sub x}, x= 0.125 and 0.25) obtained using first principles calculations. We investigated the electronic band structure using the FP-LAPW method within the sphere of the density functional theory. Thermoelectric properties were calculated using BOLTZTRAP code using the constant relaxation time approximation at three different temperatures 300, 600 and 800 K. Seebeck coefficient (S) was found to decrease with increasing temperature, electrical conductivity (σ/τ) was almost constant in the entire temperature range and thermal conductivity (κ/τ) increased with increasing temperature for all samples. Sulfur doped samples showed enhanced seebeck coefficient, decreased thermal conductivity and decreased electrical conductivity at all temperatures. At 300 K, S increased from 1500 µV/K(SnSe) to 1720μV/K(SnSe{sub 0.75}S{sub 0.25}), thermal conductivity decreased from 5 × 10{sup 15} W/mKs(SnSe) to 3 × 10{sup 15} W/mKs(SnSe{sub 0.75}S{sub 0.25}), electrical conductivity decreased from 7 × 10{sup 20}/Ωms(SnSe) to 5 × 10{sup 20} /Ωms(SnSe{sub 0.75}S{sub 0.25}). These calculations show that sulfur doped tin selenide exhibit better thermoelectric properties than undoped tin selenide.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗