Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ELASTIC PROPERTY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Tuning the Cross-Linker Crystallinity of a Stretchable Polymer Semiconductor

The cross-linking of conjugated polymers has been shown to be an effective strategy to improve its elastic properties to give deformable semiconductors for plastic electronics. Although there have been extensive studies of the structural requirements of the polymer host for good film ductility, no work to date has focused on the relevance of the structural design or chemistry of these cross-linker additives. In this study, urethane groups and tertiary carbon atoms are inserted into the alkyl backbone of perfluorophenyl azide-based cross-linkers to investigate the importance of cross-linker crystallinity with respect to polymer morphology and hence mechanical and electrical properties. Linear cross-linkers with hydrogen bonding from urethane groups readily phase separate and recrystallize in the polymer network to form cross-linked domains that obstruct the strain distribution of the polymer film. Branch cross-linkers with tertiary carbon on the other hand form an evenly cross-linked network in the polymer blend stemming from excellent miscibility and show a 4-fold increase in fracture strain. Furthermore, a stable hole mobility of 0.2 cm 2 V –1 s –1 is achieved up to ε = 100%, and a stable hole mobility of 0.1 cm 2 V –1 s –1 after 2000 cycles of ε = 25% on fully stretchable organic field-effect transistors.

36 MATERIALS SCIENCE↗

Negative Thermal Expansion, Response to Pressure and Phase Transitions in CaTiF 6

Strong volume negative thermal expansion over a wide temperature range typically only occurs in ReO 3 -type fluorides that retain an ideal cubic structure to very low temperatures, such as ScF 3 , CaZrF 6 , CaHfF 6 , and CaNbF 6 . In this work, CaTiF 6 was examined in an effort to expand this small family of materials. However, it undergoes a cubic ($Fm\overline{3}m$) to rhombohedral ($R\overline3$) transition on cooling to ~120 K, with a minimum volume coefficient of thermal expansion (CTE) close to –42 ppm K –1 at 180 K and a CTE of about –32 ppm K –1 at room temperature. On compression at ambient temperature, the material remains cubic to ~0.25 GPa with K 0 = 29(1) GPa and K' 0 = –50(5). Cubic CaTiF 6 is elastically softer and shows more pronounced pressure induced softening, than both CaZrF 6 and CaNbF 6 . In sharp contrast to both CaZrF 6 and CaNbF 6 , CaTiF 6 undergoes a first-order pressure induced octahedral tilting transition to a rhombohedral phase ($R\overline3$) on compression above 0.25 GPa, which is closely related to that seen in ScF 3 . Just above the transition pressure, this phase is elastically very soft with a bulk modulus of only ~4 GPa as octahedral tilting associated with a reduction in the Ca–F–Ti angles provides a low energy pathway for volume reduction. This volume reduction mechanism leads to highly anisotropic elastic properties, with the rhombohedral phase displaying both a low bulk modulus and negative linear compressibility parallel to the crystallographic c -axis for pressures below ~2.5 GPa. At ~3 GPa, a further phase transition to a poorly ordered phase occurs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermoelectric Material SnPb 2 Bi 2 S 6 : The 4,4 L Member of Lillianite Homologous Series with Low Lattice Thermal Conductivity

Although the binary sulfides Bi 2 S 3 , PbS, and SnS have attracted extensive interest as thermoelectric materials, no quaternary sulfides containing Sn/Pb/Bi/S elements have been reported. In this paper, we report the synthesis of a new quaternary sulfide, SnPb 2 Bi 2 S 6 , which crystallizes in the orthorhombic space group Pnma with unit cell parameters of a = 20.5458(12) Å, b = 4.0925(4) Å, c = 13.3219(10) Å. SnPb 2 Bi 2 S 6 has a lillianite-type crystal structure consisting of two alternately aligned NaCl-type structural motifs separated by a mirror plane of PbS 7 monocapped trigonal prisms. In the lillianite homologous series, SnPb 2 Bi 2 S 6 can be classified as 4,4L, where the superscripted numbers indicate the maximum numbers of edge-sharing octahedra in the two adjacent NaCl-shaped slabs along the diagonal direction. The obtained SnPb 2 Bi 2 S 6 phase exhibited good thermal stability up to 1000 K and n-type degenerate semiconducting behavior, with a power factor of 3.7 μW cm -1 K -2 at 773 K. Notably, this compound exhibited a very low lattice thermal conductivity of 0.69-0.92 W m -1 K -1 at 300-1000 K. Theoretical calculations revealed that the low thermal conductivity is caused by the complex crystal structure and the related elastic properties of a low Debye temperature, low phonon velocity, and large Grüneisen parameters. A reasonable figure of merit (ZT) of ~0.3 was obtained at 770 K.

Crystal structure↗

Elastic NaxMoS2-carbon-BASE triple interface direct robust solid-solid interface for all-solid-state Na-S batteries

The promises of all-solid-state (ASS) sodium batteries for the next generation energy storage are widely recognized but their developments have been severely constrained by the difficulties to design favorable solid-solid interfaces for unhindered Na-ion transport. Using the most promising ß?-Al2O3 solid state electrolyte (BASE) as a platform, we demonstrate here a triple nanojunction strategy that provides simultaneous strong Na adhesion and continuous Na-ions diffusion at solid-solid interface. Such triple junctions (NaxMoS2-carbon-BASE) were constructed by adhering ternary composite Na anodes containing dispersed 3 wt% MoS2 and 3 wt% carbon on BASE, and provide nearly complete adhesion of Na on BASE with a much smaller contact angle (~ 45o vs. 120o of pristine Na). The composite Na anodes exhibited ~ 3 times improved elastic property and the synergy of NaxMoS2 and carbon provides the required ionic and electronic diffusion channels at solid-solid interface, which significantly improve Na utilization and resist premature failure due to loss of solid-solid contact as Na shrink during high capacity stripping. As a result, Na metal at the triple junction exhibited more than five time reduced charge transfer resistance and at least 200 hours stable battery cycling at practical current densities. The novel anode architecture also enabled high capacity cycling of prototype ASS sodium sulfur batteries when coupled with advanced sulfur cathodes containing intrinsic Na-ions diffusion channels and redox catalytic mediators, leading to stable cycling with specific capacity of 1110 mAh g-1.

ß”-Al2O3 solid electrolyte, solid state batteries,↗

Controlled Placement of Microparticles at the Water–Liquid Crystal Elastomer Interface

Control of cells behavior through topography of substrates is an important theme in biomedical applications. Among many materials used as substrates, polymers show advantages since they can be tailored by chemical functionalization. Fabrication of polymer substrates with nano- and microscale topography requires processing by lithography, microprinting, etching, etc. In this work, we introduce a different approach based on anisotropic elastic properties of polymerized smectic A (SmA) liquid crystal elastomer (LCE). When the SmA liquid crystal coating is deposited onto a substrate with planar alignment of the molecules, it develops nanogrooves at its free surface. After photopolymerization, these nanogrooves show an excellent ability to align human dermal fibroblasts (hDFs) over large areas. The alignment quality is good for both bare SmA LCE substrates and for substrates coated with fibronectin. The SmA LCE nano-topographies show a high potential for tissue engineering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

REACH coarse-grained simulation of a cellulose fiber

A molecular level understanding of the structure, dynamics and mechanics of cellulose fibers can aid in understanding the recalcitrance of biomass to hydrolysis in cellulosic biofuel production. Here, a residue-scale REACH (Realistic Extension Algorithm via Covariance Hessian) coarse-grained force field was derived from all-atom molecular dynamics (MD) simulations of the crystalline Iβ cellulose fibril. REACH maps the atomistic covariance matrix onto coarse-grained elastic force constants. The REACH force field was found to reproduce the positional fluctuations and low-frequency vibrational spectra from the all-atom model, allowing elastic properties of the cellulose fibril to be characterized using the coarse-grained force field with a speedup of >20 relative to atomistic MD on systems of the same size. The calculated longitudinal/transversal Young s modulus and the velocity of sound are in agreement with experiment. The persistence length of a 36-chain cellulose microcrystal was estimated to be ~380 μm. In conclusion, the normal-mode analysis with the REACH force field suggests that intrinsic dynamics might facilitate the deconstruction of the cellulose fibril from the hydrophobic surface.

59 BASIC BIOLOGICAL SCIENCES↗

Finite Strain Analysis of Shear and Compressional Wave Velocities

Published shear-modulus measurements for a wide variety of materials (Ar, Xe, H 2 , He, NaCl, H 2 O-VII, MgO, stishovite, bridgmanite) show that the Eulerian (spatial) description of energy vs. strain fits both finite- and infinitesimal-strain (e.g., wave velocity) elasticity data under high pressure. The Eulerian (spatial) formulations do so better than the Lagrangian (material) finite-strain description, with differences of 1% to 60% in both P- and S -wave velocities for these materials at the pressures of Earth's mantle. The findings are significant in extending to shear previous findings that compressional (pressure-volume and bulk-modulus) measurements are also best fit using the spatial formulation. Our assessment empirically documents that a self-consistent Eulerian finite-strain equation of state offers a reliable means of describing the thermodynamic and elastic properties of planetary interiors.

58 GEOSCIENCES↗

Enhanced Visibility of Subduction Slabs by the Formation of Dense Hydrous Phase A

Abstract Phase A (Mg 7 Si 2 O 8 (OH) 6 ) is one of the important dense hydrous magnesium silicates in subducting slab, because it forms after the breakdown of antigorite serpentine and could be the dominant hydrous phase in the upper‐mantle deep slab for the water transportation into deep Earth. In this study, the compressional ( P ) and shear ( S ) wave velocities of phase A were measured at simultaneous pressure and temperature conditions up to 11 GPa and 1073 K. Combined with elastic properties of olivine and pyroxenes, we calculate the hydration effect on the velocities of harzburgite lithology in cold subduction zones throughout the depth ranges where phase A is thermodynamically stable. Our calculations suggest that the hydration increases both P ‐ and S ‐wave velocities of harzburgite; at ∼5 wt% hydration, its seismic detectability is enhanced by 1%–1.5% in velocity contrasts relative to its anhydrous counterpart.

Cai, Nao↗

Active‐Source Seismic Imaging of Fault Re‐Activation and Leakage: An Injection Experiment at the Mt Terri Rock Laboratory, Switzerland

Abstract We conducted a time‐lapse seismic experiment utilizing automated active seismic source and sensor arrays to monitor a reactivated fault within the Opalinus clay formation at the Mont Terri Rock Laboratory (Switzerland), an analog caprock for geologic carbon storage. A series of six brine injections were conducted into the so‐called Main Fault to reactivate it. Seismic instrumentation in five monitoring boreholes on either side of the fault was used to continuously probe changes in P‐wave travel‐times associated with fault displacement and leakage. We performed time‐lapse travel‐time tomography on five hundred sequential data sets; this revealed a zone of decreased P‐wave velocity, up to 16 m/s, during each injection cycle, followed by a velocity increase during shut‐in. These results demonstrate varying elastic property perturbations, both spatially and temporally, along the fault plane during reactivation. We then interpreted these velocity changes in terms of fault dilation induced by pressurized fluids along the fault.

58 GEOSCIENCES↗

Fluorine-free water-in-ionomer electrolytes for sustainable lithium-ion batteries

The continuously increasing number and size of lithium-based batteries developed for large-scale applications raise serious environmental concerns. Herein, we address the issues related to electrolyte toxicity and safety by proposing a "water-in-ionomer" type of electrolyte which replaces organic solvents by water and expensive and toxic fluorinated lithium salts by a non-fluorinated, inexpensive and non-toxic superabsorbing ionomer, lithium polyacrylate. Interestingly, the electrochemical stability window of this electrolyte is extended greatly, even for high water contents. Particularly, the gel with 50 wt% ionomer exhibits an electrochemical stability window of 2.6 V vs. platinum and a conductivity of 6.5 mS cm -1 at 20 °C. Structural investigations suggest that the electrolytes locally self-organize and most likely switch local structures with the change of water content, leading to a 50% gel with good conductivity and elastic properties. A LiTi 2 (PO 4 ) 3 /LiMn 2 O 4 lithium-ion cell incorporating this electrolyte provided an average discharge voltage > 1.5 V and a specific energy of 77 Wh kg -1 , while for an alternative cell chemistry, i.e., TiO 2 /LiMn 2 O 4 , a further enhanced average output voltage of 2.1 V and an initial specific energy of 124.2 Wh kg -1 are achieved.

25 ENERGY STORAGE↗

Constraining composition and temperature variations in the mantle transition zone

The mantle transition zone connects two major layers of Earth’s interior that may be compositionally distinct: the upper mantle and the lower mantle. Wadsleyite is a major mineral in the upper mantle transition zone. Here, we measure the single-crystal elastic properties of hydrous Fe-bearing wadsleyite at high pressure-temperature conditions by Brillouin spectroscopy. Our results are then used to model the global distribution of wadsleyite proportion, temperature, and water content in the upper mantle transition zone by integrating mineral physics data with global seismic observations. Our models show that the upper mantle transition zone near subducted slabs is relatively cold, enriched in wadsleyite, and slightly more hydrated compared to regions where plumes are expected. This study provides direct evidence for the thermochemical heterogeneities in the upper mantle transition zone which is important for understanding the material exchange processes between the upper and lower mantle.

58 GEOSCIENCES↗

Using a physics-informed neural network and fault zone acoustic monitoring to predict lab earthquakes

Abstract Predicting failure in solids has broad applications including earthquake prediction which remains an unattainable goal. However, recent machine learning work shows that laboratory earthquakes can be predicted using micro-failure events and temporal evolution of fault zone elastic properties. Remarkably, these results come from purely data-driven models trained with large datasets. Such data are equivalent to centuries of fault motion rendering application to tectonic faulting unclear. In addition, the underlying physics of such predictions is poorly understood. Here, we address scalability using a novel Physics-Informed Neural Network (PINN). Our model encodes fault physics in the deep learning loss function using time-lapse ultrasonic data. PINN models outperform data-driven models and significantly improve transfer learning for small training datasets and conditions outside those used in training. Our work suggests that PINN offers a promising path for machine learning-based failure prediction and, ultimately for improving our understanding of earthquake physics and prediction.

42 ENGINEERING↗

Deep material network via a quilting strategy: visualization for explainability and recursive training for improved accuracy

Recent developments integrating micromechanics and neural networks offer promising paths for rapid predictions of the response of heterogeneous materials with similar accuracy as direct numerical simulations. The deep material network is one such approaches, featuring a multi-layer network and micromechanics building blocks trained on anisotropic linear elastic properties. Once trained, the network acts as a reduced-order model, which can extrapolate the material’s behavior to more general constitutive laws, including nonlinear behaviors, without the need to be retrained. However, current training methods initialize network parameters randomly, incurring inevitable training and calibration errors. Here, we introduce a way to visualize the network parameters as an analogous unit cell and use this visualization to “quilt” patches of shallower networks to initialize deeper networks for a recursive training strategy. The result is an improvement in the accuracy and calibration performance of the network and an intuitive visual representation of the network for better explainability.

97 MATHEMATICS AND COMPUTING↗

Probing phonon focusing, thermomechanical behavior, and moiré patterns in van der Waals architectures using surface acoustic waves

Surface acoustic waves (SAWs) propagate along solid-air, solid-liquid, and solid-solid interfaces. Their characteristics depend on the elastic properties of the solid. Combining transmission electron microscopy (TEM) experiments with molecular dynamics (MD) simulations, we probe atomic environments around intrinsic defects that generate SAWs in vertically stacked two-dimensional (2D) bilayers of MoS 2 . Our joint experimental-simulation study provides insights into SAW-induced structural and dynamical changes and thermomechanical responses of MoS 2 bilayers. Using MD simulations, we compute mechanical properties from the SAW velocity and thermal conductivity from thermal diffusion of SAWs. The results for Young’s modulus and thermal conductivity of an MoS 2 monolayer are in good agreement with experiments. The presence of defects, such as nanopores which generate SAWs, reduces the thermal conductivity of 2D-MoS 2 by an order of magnitude. We also observe dramatic changes in moiré patterns, phonon focusing, and cuspidal structures on 2D-MoS 2 layers.

36 MATERIALS SCIENCE↗

Feasibility of source-free DAS logging for next-generation borehole imaging

Characterizing and monitoring geologic formations around a borehole are crucial for energy and environmental applications. However, conventional wireline sonic logging usually cannot be used in high-temperature environments nor is the tool feasible for long-term monitoring. We introduce and evaluate the feasibility of a source-free distributed-acoustic-sensing (DAS) logging method based on borehole DAS ambient noise. Our new logging method provides a next-generation borehole imaging tool. The tool is source free because it uses ever-present ambient noises as sources and does not need a borehole sonic source that cannot be easily re-inserted into a borehole after well completion for time-lapse monitoring. The receivers of our source-free DAS logging tool are fiber optic cables cemented behind casing, enabling logging in harsh, high-temperature environments, and eliminating the receiver repeatability issue of conventional wireline sonic logging for time-lapse monitoring. We analyze a borehole DAS ambient noise dataset to obtain root-mean-squares (RMS) amplitudes and use these amplitudes to infer subsurface elastic properties. We find that the ambient noise RMS amplitudes correlate well with anomalies in conventional logging data. The source-free DAS logging tool can advance our ability to characterize and monitor subsurface geologic formations in an efficient and cost-effective manner, particularly in high-temperature environments such as geothermal reservoirs. Further validation of the source-free DAS logging method using other borehole DAS ambient noise data would enable the new logging tool for wider applications.

58 GEOSCIENCES↗

Origin of charge density wave in topological semimetals SrAl 4 and EuAl 4

Topological semimetals in BaAl 4 -type structure show many interesting behaviors, such as charge density wave (CDW) in SrAl 4 and EuAl 4 , but not the isostructural and isovalent BaAl 4 , SrGa 4 , and BaGa 4 . Here using Wannier functions based on density functional theory, we calculate the susceptibility functions with millions of k-points to reach the small q-vector and study the origin and driving force behind the CDW. Our comparative study reveals that the origin of the CDW in SrAl 4 and EuAl 4 is the strong electron-phonon coupling interaction for the transverse acoustic mode at small q-vector along the Γ-Z direction besides the maximum of the real part of the susceptibility function from the nested Fermi surfaces of the Dirac-like bands, which explains well the absence of CDW in the other closely related compounds in a good agreement with experiment. We also connect the different CDW behaviors in the Al compounds to the macroscopic elastic properties.

36 MATERIALS SCIENCE↗

Thermodynamic calculations of oxygen self-diffusion in mixed-oxide nuclear fuels

Mixed-oxide fuels containing uranium with thorium and/or plutonium may play an important part in future nuclear fuel cycles. There are, however, significantly less data available for these materials than conventional uranium dioxide fuel. In the present study, we employ molecular dynamics calculations to simulate the elastic properties and thermal expansivity of a range of mixed oxide compositions. These are then used to support equations of state and oxygen self-diffusion models to provide a self-consistent prediction of the behaviour of these mixed oxide fuels at arbitrary compositions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Exploring the relationship between nanoscale dynamics and macroscopic rheology in natural polymer gums

Here, we report a study connecting the nanoscale and macroscale structure and dynamics of Acacia mearnsii gum as probed by small-angle x-ray scattering (SAXS), x-ray photon correlation spectroscopy (XPCS) and rheology. Acacia gum, in general, is a complex polysaccharide used extensively in industry. Over the analyzed concentration range (15 to 30 wt%) the A. mearnsii gum is found to have a gel-like linear rheology and to exhibit shear thinning flow behavior under steady shear. The gum exhibited a steadily increasing elastic modulus with increasing time after they were prepared and also the emergence of shear thickening events within the shear thinning behavior, characteristic of associative polymers. XPCS measurements using gold nanoparticles as tracers were used to explore the microscopic dynamics within the biopolymer gels and revealed a two-step relaxation process with a partial decay at inaccessibly short times, suggesting caged motion of the nanoparticles, followed by a slow decay at later delay times. Non-diffusive motion evidenced by a compressed exponential line shape and an inverse relationship between relaxation time and wave vector characterizes the slow dynamics of A. mearnsii gum gels. Surprisingly, we have determined that the nanometer-scale mean square displacement of the nanoparticles showed a close relationship to the values predicted from the macroscopic elastic properties of the material, obtained through the rheology experiments. Our results demonstrate the potential applicability of the XPCS technique in the natural polymers field to connect their macroscale properties with their nanoscale structure and dynamics.

36 MATERIALS SCIENCE↗