Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EFFECTIVE CHARGE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Plutonium environmental chemistry: mechanisms for the surface-mediated reduction of Pu(v/vi)

In recent decades, interest in plutonium mobility has increased significantly due to the need of the United States, as well as other nations, to deal with commercial spent nuclear fuel, nuclear weapons disarmament, and the remediation of locations contaminated by nuclear weapons testing and production. Although there is a global consensus that geologic disposal is the safest existing approach to dealing with spent nuclear fuel and high-level nuclear waste, only a few nations are moving towards implementing a geologic repository due to technical and political barriers. Understanding the factors that affect the mobility of plutonium in the subsurface environment is critical to support the development of such repositories. The importance of redox chemistry in determining plutonium mobility cannot be understated. While Pu(IV) is generally assumed to be immobile in the subsurface environment due to sorption or precipitation, Pu(V) tends to be mobile due to its relatively low effective charge and weak complex formation. This review highlights one particularly important aspect of plutonium behaviour at the mineral–water interface—the concept of surface-mediated reduction, which describes the reduction of plutonium on a mineral surface. It provides a conceptual model for and evidence supporting or refuting each proposed mechanism for surface-mediated reduction including (i) radiolysis at the mineral surface, (ii) electron transfer via ferrous iron or manganese in the mineral structure, (iii) electron shuttling due to the semiconducting properties of the mineral, (iv) disproportionation of Pu(V), (v) facilitation by proton exchange sites, (vi) stabilisation of Pu(IV) due to the increased concentration gradient within the electrical double layer, and (vii) a Nernstian favourability of Pu(IV) surface complexes and colloids. It also provides new perspectives on future research directions.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Controlling the stability of Pickering emulsions by pH-responsive nanoparticles

Electrostatic dissipative particle dynamics simulations were conducted to model the interactions between emulsion droplets stabilized by pH-sensitive polyelectrolyte-grafted nanoparticles. Using a steered molecular dynamics approach, a mechanistic study of forced coalescence was performed to probe the resistance between two particle-covered droplets. The degree of ionization of the grafted polyelectrolytes was adjusted to capture the pH responsiveness. The maximal resistance forces were measured to quantitatively discriminate the efficacy of particles in stabilizing emulsions at different degrees of ionization. Through analyzing droplet dynamics, resistance force variation, and electric field, we discovered that the resistance is attributed to direct electrostatic repulsion, the image charge effect near the water–oil interface, and steric hindrance among extended polymers. When the particle density on the droplet surface is relatively low, the increasing resistance forces at higher degrees of ionization can effectively prevent droplet coalescence. Oppositely, the ionization compromises emulsion stability when the particle surface coverage is high. Substantial desorption of particles from the interface was triggered as the degree of ionization increases. Finally, this in turn reduces resistance force and facilitates coalescence. Moreover, the nanoparticles prevent coalescence at high surface coverages by forming dense layers at individual interfaces, while the particle bridges straddling two interfaces were found at low surface coverages, which can also keep the droplets apart.

42 ENGINEERING↗

Interaction between hydrogen molecules and metallofullerenes.

Within first-principles density functional theory, we explore the feasibility of usingmetallofullerenes as efficient hydrogen storage media. In particular, we systematically investigate theinteraction between hydrogen molecules and La encapsulated all-carbon fullerenes, Cn (20≤n≤82),focusing on the role of transferred charges between the metal atoms and fullerenes on the affinity ofhydrogen molecules to the metallofullerenes. Our calculations show that three electrons are transferredfrom La atom to fullerene cages, while the induced charges are mostly screened by the fullerene cages.We find the local enhancement of molecular hydrogen affinity to the fullerenes to be sensitivelydependent on the local bonding properties, rather than on the global charging effects.

08 HYDROGEN↗

Vlasov simulation of the interaction between the solar wind and a dielectric body

The global structure of wake field behind an unmagnetized object in the solar wind is studied by means of a 2.5-dimensional full-electromagnetic Vlasov simulation. The interaction of a plasma flow with an unmagnetized object is quite different from that with a magnetized object such as the Earth. Due to the absence of the global magnetic field, the unmagnetized object absorbs plasma particles that reach the surface, generating a plasma cavity called ''wake'' on the antisolar side of the object. For numerical simulations of electromagnetic structures around the wake, it is important to include the charging effect in global-scale simulations. The present study is one of the first attempts to study the formation of wake fields via a full-kinetic Vlasov simulation. It has been confirmed that the spatial structures of wake fields depend on the direction of interplanetary magnetic fields as well as the distance from the body.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electronic structure of Al-doped ZnO transparent conductive thin films studied by x-ray absorption and emission spectroscopies

This study used O K-, Zn L{sub 3}-, Zn K-, and Al K-edges x-ray absorption near-edge structure (XANES) and O K-edge x-ray emission spectroscopy (XES) measurements to investigate the electronic structure of transparent Al-doped ZnO (AZO) thin film conductors. The samples were prepared on glass substrates at a low temperature near 77 K by using a standard RF sputtering method. High-purity Ne (5N) was used as the sputtering gas. The crystallography of AZO thin films gradually transformed from the ZnO wurtize structure to an amorphous structure during sample deposition, which suggests the suitability to grow on flexible substrates, eliminating the severe degradation due to fragmentation by repeated bending. The O K- and Zn L{sub 3}-edges XANES spectra of AZO thin films revealed a decrease in the number of both O 2p and Zn 3d unoccupied states when the pressure of Ne was increased from 5 to 100 mTorr. In contrast, Al K-edges XANES spectra showed that the number of unoccupied states of Al 3p increased in conjunction with the pressure of Ne, indicating an electron transfer from Al to O atoms, and suggesting that Al doping increases the negative effective charge of oxygen ions. XES and XANES spectra of O 2p states at the O K-edge also revealed that Al doping not only raised the conduction-band-minimum, but also increased the valence-band-maximum and the band-gap. The results indicate that the reduction in conductivity of AZO thin films is due to the generation of ionic characters, the increase in band-gap, and the decrease in density of unoccupied states of oxygen.

36 MATERIALS SCIENCE↗

Influence of lateral target size on hot electron production and electromagnetic pulse emission from laser-irradiated metallic targets

The influences of lateral target size on hot electron production and electromagnetic pulse emission from laser interaction with metallic targets have been investigated. Particle-in-cell simulations at high laser intensities show that the yield of hot electrons tends to increase with lateral target size, because the larger surface area reduces the electrostatic field on the target, owing to its expansion along the target surface. At lower laser intensities and longer time scales, experimental data characterizing electromagnetic pulse emission as a function of lateral target size also show target-size effects. Charge separation and a larger target tending to have a lower target potential have both been observed. The increase in radiation strength and downshift in radiation frequency with increasing lateral target size can be interpreted using a simple model of the electrical capacity of the target.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Pure ion current collection in ion sensitive probe measurement with a metal mesh guard electrode for evaluation of ion temperature in magnetized plasma

This paper presents a new design of ion sensitive probe (ISP) that enables collection of pure ion current for accurate measurement of the perpendicular ion temperature in magnetized plasmas. The new type of ISP resolves a longstanding issue widely observed in ISP type measurements, namely, that the current-voltage characteristic is smeared by an unexpected electron current in the standard ISP model. The new ISP is equipped with a fine scale metal mesh on the sensor entrance to prevent electrons from flowing to the sensor, a phenomenon considered to be caused by the space-charge effect. The new ISP successfully measured the ion temperature of electron cyclotron resonance plasmas.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Investigation of uncertainty components in Coulomb blockade thermometry

Coulomb blockade thermometry (CBT) has proven to be a feasible method for primary thermometry in every day laboratory use at cryogenic temperatures from ca. 10 mK to a few tens of kelvins. The operation of CBT is based on single electron charging effects in normal metal tunnel junctions. In this paper, we discuss the typical error sources and uncertainty components that limit the present absolute accuracy of the CBT measurements to the level of about 1 % in the optimum temperature range. Identifying the influence of different uncertainty sources is a good starting point for improving the measurement accuracy to the level that would allow the CBT to be more widely used in high-precision low temperature metrological applications and for realizing thermodynamic temperature in accordance to the upcoming new definition of kelvin.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Temperature dependent junction capacitance-voltage characteristics of Ni embedded TiN/SiO{sub 2}/p-Si metal–insulator–semiconductor structure

This work presents the junction capacitance–voltage characteristics of highly textured/epitaxial Ni nanoparticle embedded in TiN matrix (TiN(Ni)) metal-insulator-semiconductor TiN(Ni)/SiO{sub 2}/p-Si (100) heterojunction in the temperature range of 10–300 K. This heterojunction behaves as metal-semiconductor junction with unavoidable leakage through native oxide SiO{sub 2} layer. The clockwise hysteresis loop has been observed in the capacitance-voltage characteristics measured at various frequencies mainly due to presence of trap centers at the TiN(Ni)/SiO{sub 2} interface and these are temperature dependent. The spin-dependent trap charge effect at the interface influences the quadratic nature of the capacitance with magnetic field. The junction magnetocapacitance (JMC) is observed to be dependent on both temperature and frequency. The highest JMC of this heterojunction has been observed at 200 K at higher frequencies (100 kHz–1 MHz). It is found that there is not much effect of band structure modification under magnetic field causing the JMC.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical properties of Mn-Co-Ni-O thin films prepared by radio frequency sputtering deposition

Mn{sub 1.4}Co{sub 1.0}Ni{sub 0.6}O{sub 4} (MCN) thin films are prepared by RF sputtering deposition method on amorphous Al{sub 2}O{sub 3} substrate. Microstructure and X-ray photoelectron spectroscopy analyses suggest improvements in crystallinity and stoichiometry for MCN films with post-annealed process. Infrared (IR) optical constants of the MCN films are obtained by IR spectroscopic ellipsometer (SE) in the range of 1500 cm{sup −1} to 3200 cm{sup −1} (2.8–6.7 μm). The derived effective charge supports the increase of the oxidation after annealing. The dielectric function of the films is also extracted by SE in the range of 300–1000 nm adopting a double Lorentz model together with a Tauc–Lorentz model. The mechanism in electronic transition process is discussed based on the variation observed in the optical absorption spectra of the as-grown and post-annealed samples. The optical absorption peaks located at 1.7 eV, 2.4–2.6 eV, and 3.5–4 eV are attributed to the charge-transfer transitions of 2p electrons of oxygen ions and 3d electrons of Mn and Co ions. Our results are very important to understand the optoelectronic mechanism and exploit applications of metal oxides.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Imaging and characterization of conducting ferroelectric domain walls by photoemission electron microscopy

High-resolution X-ray photoemission electron microscopy (X-PEEM) is a well-established method for imaging ferroelectric domain structures. Here, we expand the scope of application of X-PEEM and demonstrate its capability for imaging and investigating domain walls in ferroelectrics with high spatial resolution. Using ErMnO{sub 3} as test system, we show that ferroelectric domain walls can be visualized based on photo-induced charging effects and local variations in their electronic conductance can be mapped by analyzing the energy distribution of photoelectrons. Our results open the door for non-destructive, contact-free, and element-specific studies of the electronic and chemical structure at domain walls in ferroelectrics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Comparison of electrostatic and localized plasmon induced light enhancement in hybrid InGaN/GaN quantum wells

The light enhancement phenomena in InGaN/GaN multi-quantum wells (MQWs) infiltrated with metal nanoparticles (NPs) are studied using resonant and off-resonant localized plasmon interactions. The emission and recombination characteristics of carriers in InGaN/GaN MQW structures with inverted hexagonal pits (IHPs) are modified distinctly depending on the nature of their interaction with the metal NPs and with the pumping and emitted photons. It is observed that the emission intensity of light is significantly enhanced when the emission energy is off-resonant to the localized plasmon frequency of the metal nanoparticles. This results in enhanced emission from MQW due to Au nanoparticles and from IHPs due to Ag nanoparticles. At resonant-plasmon frequency of the Ag NPs, the emission from MQWs is quenched due to the re-absorption of the emitted photons, or due to the drift carriers from c-plane MQWs towards the NPs because of the Coulomb forces induced by the image charge effect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Femtosecond time-resolved photoemission electron microscopy for spatiotemporal imaging of photogenerated carrier dynamics in semiconductors

We constructed an instrument for time-resolved photoemission electron microscopy (TR-PEEM) utilizing femtosecond (fs) laser pulses to visualize the dynamics of photogenerated electrons in semiconductors on ultrasmall and ultrafast scales. The spatial distribution of the excited electrons and their relaxation and/or recombination processes were imaged by the proposed TR-PEEM method with a spatial resolution about 100 nm and an ultrafast temporal resolution defined by the cross-correlation of the fs laser pulses (240 fs). A direct observation of the dynamical behavior of electrons on higher resistivity samples, such as semiconductors, by TR-PEEM has still been facing difficulties because of space and/or sample charging effects originating from the high photon flux of the ultrashort pulsed laser utilized for the photoemission process. Here, a regenerative amplified fs laser with a widely tunable repetition rate has been utilized, and with careful optimization of laser parameters, such as fluence and repetition rate, and consideration for carrier lifetimes, the electron dynamics in semiconductors were visualized. For demonstrating our newly developed TR-PEEM method, the photogenerated carrier lifetimes around a nanoscale defect on a GaAs surface were observed. The obtained lifetimes were on a sub-picosecond time scale, which is much shorter than the lifetimes of carriers observed in the non-defective surrounding regions. Our findings are consistent with the fact that structural defects induce mid-gap states in the forbidden band, and that the electrons captured in these states promptly relax into the ground state.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Classical transport equations for burning gas-metal plasmas

Thermonuclear inertial confinement fusion plasmas confined by a heavy metal shell may be subject to the mixing of metal into the gas with a resulting degradation of fusion yield. Classical plasma diffusion driven by a number of gradients can provide a physical mechanism to produce atomic mix, possibly in concert with complex hydrodynamic structures and/or turbulence. This paper gives a derivation of the complete dissipative plasma hydrodynamics equations from kinetic theory, for a binary ionic mixture plasma consisting of electrons, e, a light (hydrogenic gas) ion species, i, and a heavy, high ZI plasma metal species, I. A single mean ionization state for the heavy metal, ZI, is assumed to be provided by some independent thermodynamic model of the heavy metal ZI=ZI(ni,nI,Te). The kinetic equations are solved by a generalized Chapman-Enskog expansion that assumes small Knudsen numbers for all species: NKe≡λe/L≪1,NKi≡λi/L≪1. The small electron to ion mass ratio, me/mi≪1, is utilized to account for electron-ion temperature separation, Te≠Ti, and to decouple the electron and ion transport coefficient calculations. This produces a well ordered perturbation theory for the electrons, resulting in the well known “Spitzer” problem of Spitzer and collaborators and solved independently by Braginskii. The formulation in this paper makes clear the inherent symmetry of the transport and gives an analytic solution for all values of the effective charge Zeff, including Zeff<1. The electron problem also determines the ambipolar electric field and the “thermal forces” on both ion species that are needed for the ion kinetic solution. The ion transport problem makes use of the small mass ratio between ion species, mi/mI≪1, to identify an “ion Spitzer problem” that is mathematically identical to that for the electrons but with different thermodynamic forces. The ionic scattering parameter, ΔI≡nIZI2/ni, replaces the Zeff of the electron problem, but has an extended domain, 0≤ΔI<∞, to cover all mixture fractions from the pure gas to the pure metal plasma. The extension of the Spitzer problem to include this extended domain is given in this work. The resulting transport equations for the binary gas-metal plasma mixture are complete and accurate through second order. All transport coefficients are provided in analytic form.

Molvig, Kim↗

Integrated fusion simulation with self-consistent core-pedestal coupling

In this study, accurate prediction of fusion performance in present and future tokamaks requires taking into account the strong interplay between core transport, pedestal structure, current profile and plasma equilibrium. An integrated modeling workflow capable of calculating the steady-state self- consistent solution to this strongly-coupled problem has been developed. The workflow leverages state-of-the-art components for collisional and turbulent core transport, equilibrium and pedestal stability. Validation against DIII-D discharges shows that the workflow is capable of robustly pre- dicting the kinetic profiles (electron and ion temperature and electron density) from the axis to the separatrix in good agreement with the experiments. An example application is presented, showing self-consistent optimization for the fusion performance of the 15 MA D-T ITER baseline scenario as functions of the pedestal density and ion effective charge Z eff .

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of calcium ions on the interactions between surfaces end-grafted with weak polyelectrolytes

We study the interactions between two planar surfaces end-tethered with poly(acrylic acid) polymers in electrolyte solutions containing calcium ions, using a molecular theory. We found that by adding divalent calcium ions to an aqueous solution of monovalent ions leads to a dramatic reduction in the size and range of effective interactions between the two polymer layers. This is caused by the formation of favorable calcium bridges, i.e., complexes of one calcium ion and two carboxylic acid monomers, that reduce the effective charge of the polymer layers and, at sufficient calcium ion concentrations, can cause the polymer layers to collapse. For calcium ion concentrations above approximately 1 mM, the repulsions between the opposing end-grafted surfaces disappear and attractions occur. These attractions are correlated with the occurrence of interlayer divalent calcium bridges and do not occur for poly(acrylic acid) layers in contact with reservoir solutions containing only monovalent ions. This result indicates the suitability of divalent calcium ions to control and change the interaction range and strength, which is a useful property that is desirable in the design of stimuli-responsive nanomaterials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High energy electron diffraction instrument with tunable camera length

Ultrafast electron diffraction (UED) stands as a powerful technique for real-time observation of structural dynamics at the atomic level. In recent years, the use of MeV electrons from radio frequency guns has been widely adopted to take advantage of the relativistic suppression of the space charge effects that otherwise limit the temporal resolution of the technique. Nevertheless, there is not a clear choice for the optimal energy for a UED instrument. Scaling to beam energies higher than a few MeV does pose significant technical challenges, mainly related to the inherent increase in diffraction camera length associated with the smaller Bragg angles. In this study, we report a solution by using a compact post-sample magnetic optical system to magnify the diffraction pattern from a crystal Au sample illuminated by an 8.2 MeV electron beam. Our method employs, as one of the lenses of the optical system, a triplet of compact, high field gradients (>500 T/m), small-gap (3.5 mm) Halbach permanent magnet quadrupoles. Shifting the relative position of the quadrupoles, we demonstrate tuning the magnification by more than a factor of two, a 6× improvement in camera length, and reciprocal space resolution better than 0.1 Å –1 in agreement with beam transport simulations.

47 OTHER INSTRUMENTATION↗