Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Dot”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Nonradiative recombination of excitons in semimagnetic quantum dots

The mechanisms of the nonradiative recombination of excitons in neutral and charged quantum dots based on II–VI semimagnetic semiconductors are investigated. It is shown that, along with the dipole–dipole and direct-exchange mechanisms, there is one more mechanism referred to as the indirect-exchange mechanism and related to sp–d mixing. The selection rules for nonradiative recombination by exchange mechanisms are subsequently derived. The dependence of the efficiency of all recombination mechanisms on the quantum-dot size is studied. The experimentally observed growth in the intracenter photoluminescence intensity with decreasing size of dots and nanocrystals is accounted for. Methods for experimental determination of the contributions of different mechanisms to nonradiative recombination are discussed.

36 MATERIALS SCIENCE↗

Subminiature emitters based on a single (111) In(Ga)As quantum dot and hybrid microcavity

The results of numerical modeling and investigation of a hybrid microcavity based on a semiconductor Bragg reflector and a microlens selectively positioned above a single (111) In(Ga)As quantum dot are presented. Emitters based on the hybrid microcavity demonstrate the effective pumping of a single quantum dot and high emission output efficiency. The microcavity design can be used to implement emitters of polarization- entangled photon pairs based on single semiconductor quantum dots.

36 MATERIALS SCIENCE↗

Spectroscopy of PbS and PbSe Quantum Dots in Fluorine Phosphate Glasses

Transmission spectra of the narrow-bandgap semiconductor quantum dots PbS and PbSe in the fluorine phosphate glass are experimentally studied at different temperatures. Energies of 1s exciton transitions observed in the absorption spectra are used to determine characteristic sizes of the quantum dots under study. A nontrivial temperature behavior of the ground and excited quantum confined states in the quantum dots of different sizes are observed.

36 MATERIALS SCIENCE↗

Nonlinear Optical Properties of CdS/ZnS Quantum Dots in a High-Molecular-Weight Polyvinylpyrrolidone Matrix

Sols containing core/shell CdS/ZnS semiconductor quantum dots are synthesized and their nonlinear properties, which are interesting for a large variety of applications in nanophotonics, are studied. The quantum dots produced are smaller in dimensions than the exciton Bohr radius and, therefore, exhibit a well-pronounced quantum-confinement effect. The nonlinear optical properties of low-concentration sols are studied upon exposure to laser pulses with an emission wavelength of 532 nm and a duration of 5 ns by the z-scan technique. The dependences of nonlinear optical coefficients on the concentration of CdS/ZnS quantum dots are obtained. The intensity dependence of two-photon absorption coefficients is presented. The dependence determines the boundary of the influence of high-order nonlinearities on the nonlinear transmittance of the samples. The mechanisms of optical limitation exhibited by sols, specifically, two-photon absorption, nonlinear refraction, and nonlinear scattering are discussed.

36 MATERIALS SCIENCE↗

Relation between the Electronic Properties and Structure of InAs/GaAs Quantum Dots Grown by Vapor-Phase Epitaxy

On the basis of a comprehensive study of the structural and electronic properties of InAs/GaAs quantum dots grown by vapor-phase epitaxy at atmospheric pressure, a structural model of the quantum dots as three truncated pyramids adjoined at their bases is chosen. The model takes into account the diffusive smearing of the composition near the base and lateral surface as well as the segregation of indium near the vertex. It is established that the wave functions of charge carriers in the ground state are localized in a comparatively small region of the quantum dot near its vertex.

36 MATERIALS SCIENCE↗

Submonolayer InGaAs/GaAs Quantum Dots Grown by MOCVD

The mode of the growth of InGaAs quantum dots by MOS-hydride epitaxy on GaAs substrates without a deviation and with a deviation of 2° is selected for laser structures emitting at wavelengths above 1.2 μm at room temperature. As a result, a quantum-dot density of 4 × 10{sup 10} cm{sup –2} is achieved. Stimulated emission is observed in laser structures with seven layers of quantum dots at a wavelength of 1.06 μm at liquid-nitrogen temperature. The threshold power density of optical pumping is about 5 kW/cm{sup 2}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Heterostructures with InGaAs/GaAs quantum dots doped with transition elements: II. Study of the circularly polarized luminescence

Optical and transport properties of the heterostructure with the InAs/GaAs quantum dots doped with manganese or chromium atoms in the course of growth using metal-organic vapor phase epitaxy (MOVPE) are analyzed. Circularly polarized luminescence was obtained due to doping of quantum dots with the Mn or Cr atoms. The sign of the degree of circular polarization was found to depend on the dopant. The effect is interpreted using specific features of the radiative recombination in quantum dots in the presence of resident electrons and holes.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Development of III-Sb Quantum Dot Systems for High Efficiency Intermediate Band Solar Cells

This project aimed to develop solar cells that can help reduce cost per watt. This work focused on developing solar cells that utilize quantum dot (QD) nanomaterials to provide multijunction solar cell efficiency at the cost of single junction solar cell. We focused on a novel concept known as intermediate band solar cells (IBSC) where an additional energy band is inserted in a single solar cell to accommodate sub-bandgap photons absorption which otherwise are lost through transmission. The additional energy band can be achieved by growing QDs within a solar cell p-n junction. Though numerous studies have been conducted to develop such QD systems, very small improvements in solar energy conversion efficiency have been reported. This is mainly due to non-optimal material parameters such as band gap, band offset etc. In this work, we identified and developed a novel QD material system that meets the requirements of IBSC more closely than the current state-of-the-art technology. To achieve these goals, we focused on three important areas of solar cell design: band structure calculations of new materials, efficient device design for high efficiency, and development of new semiconductor materials. In this project, we focused on III-Sb materials as they possess a wide range of energy bandgaps from 0.2 eV to 2eV. Despite the difficulty involved in realizing these materials, we were successfully developed these materials through a systematic approach. Materials studied in this work are AlAsSb (Aluminum Arsenide Antimonide), InAlAs (Indium Aluminum Arsenide) and InAs (Indium Arsenide). InAs was used to develop QD layers within AlAsSb and InAlAs p-n junctions. As the QDs have very small volume, up to 30 QD layers been inserted into the p-n junction to enhance light absorption. These QD multi-stack devices helped in understanding the challenges associated with the development of quantum dot solar cells. The results from this work show that the quantum dot solar cells indeed improve the efficiency via sub-bandgap photon absorption but much lower than the expected theoretical efficiencies. Yet, these devices serve as a proof of concept and the results provide vital information for future IBSC work. With further understanding of the operation of intermediate band solar cells and the identification of less expensive materials can substantially improve the solar cell efficiency and drastically cut the cell cost thereby reducing the dollar/watt cost.

14 SOLAR ENERGY↗

Compositionally Graded Alloy Quantum Dot Phosphors for Solid State Lighting. Final Report

To push the boundaries of efficiency and cost in solid state lighting (SSL), narrow band red emitting down conversion phosphors must be improved. These materials are critical to both the color rendering ability and optical output of phosphor converted light emitting diodes (LEDs). Improvements in these performance parameters will have a significant impact on the adoption of SSL in retail, office, and home lighting applications. Quantum Dots (QDs) are widely acknowledged as a cost-effective front-runner among developing downconverting technologies because they emit narrow band luminescence that is tunable across the visible spectrum. Current syntheses of quantum dots, however, utilize expensive and toxic reagents and often involve several time-intensive purification steps. To address this, we have introduced a novel, cost-effective synthetic scheme, whereby the final quantum dot structures can be accessed with fewer synthetic steps using a library of inexpensive, easily-synthesized precursors. With the help of automated high throughput synthesis robotics, Columbia, LBNL, and OSRAM have optimized red and amber CdS/CdSe/CdS QD architectures for SSL. QDs with improved shelling layers have been identified that meet the industry state of the art performance on chip under high humidity accelerated aging tests. This is remarkable considering the time frame of this project compared to the time and resources allocated for the development of the industrial standard. Furthermore, although particle stability to optical charging is often stressed in improving QLED performance, we have identified effective ZnS particle over-coating as the most important factor determining particle survivability and device performance in down-converting LEDs.

36 MATERIALS SCIENCE↗

Mid-infrared surface plasmon coupled emitters utilizing intersublevel transitions in InAs quantum dots.

We demonstrate mid-infrared electroluminescence from intersublevel transitions in self-assembled InAs quantum dots coupled to surface plasmon modes on metal hole arrays. Subwavelength metal hole arrays with different periodicity are patterned into the top contact of the broadband (9-15 {micro}m) quantum dot material and the measured electroluminescence is compared to devices without a metal hole array. The resulting normally directed emission is narrowed and a splitting in the spectral structure is observed. By applying a coupled quantum electrodynamic model and using reasonable values for quantum dot distributions and plasmon linewidths we are able to reproduce the experimentally measured spectral characteristics of device emission when using strong coupling parameters.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Scintillation Hydro-Gel for Isotopic Neutron (SHINE): Eco-Friendly Quantum Dot Neutron Detectors

The development of new neutron detectors to replace helium-3 (3He) detectors is imperative due to a worldwide shortage of 3He following the draw down in nuclear weapons production since the end of the Cold War. The United States Department of Homeland Security would like to deploy monitors for the detection of neutron emissions from shipping containers housing illicit nuclear material; however, this effort has been put on hold until new replacements for 3He detectors can be developed. Scintillation Hydro-Gel for isotopic Neutron Emitters (SHINE) is a unique, first of its kind, 6Li-loaded quantum dot gel scintillator developed at INL. By incorporating 6Li with quantum dots in a gel matrix, SHINE displays the best properties of liquid and solid scintillators without their disadvantages such as continuous filtering to keep liquids free of contaminates, slow throughput of containers, higher base component costs, ‘dead’ voids in solid scintillators, and a high loading of 6Li without compromising on light transparency. Additionally, SHINE is completely eco-friendly, a breakthrough in high-efficiency detection systems. SHINE is a unique combination of 6LiCl, a highly water-soluble compound, and InP/ZnS core/shell quantum dots, which are poured into a gel-form using cross-linking polymers. In this presentation, SHINE has been successfully tested for neutron detection and shows promise as both a replacement for current 3He neutron detectors as well as potential use in handheld, compact neutron detection units and antineutrino detection.

36 MATERIALS SCIENCE↗

Development and Application of an Oversize Reusable DOT 7A Type A Overpack Container at the Y-12 National Security Complex - 13150

Waste Management personnel at the Y-12 National Security Complex (Y-12) are concluding a multi-year effort to dispose of a large backlog of low-level waste. Six containers presented a particularly difficult technical challenge in that they each contained large robust equipment (mostly salt baths) with elevated levels of highly enriched uranium (exceeding U.S. Department of Transportation (DOT) fissile-excepted quantities). The equipment was larger than the standard 1.2 m x 1.2 m x 1.8 m (4 ft x 4 ft x 6 ft) DOT Specification 7A Type A box and would have been very difficult to size-reduce because of several inches of steel plate (along with insulating block and concrete) in the equipment design. A critical breakthrough for the success of the project involved procuring and developing two oversize reusable DOT Specification 7A Type A (fissile tested) containers (referred to as the CTI Model 7AF-690-SC) that could be used as overpacks for the original boxes of equipment. The 7A Type A overpack containers are approximately 3.5 m long x 2.7 m wide x 2.8 m high (11.7 ft x 8.9 ft x 9.2 ft) with a maximum gross weight of 10,660 kg (23,500 lb) and a payload capacity of 6,804 kg (15,000 lbs). The boxes were designed and fabricated using a split cavity design that allowed the gasketed and bolted closure to lie along the horizontal centerline of the box. The central closure location in this design allows for strengthening of box corners that tend to be points of weakness or failure in 49CFR173.465 drop tests. By combining the split cavity design with large diameter tubing and diagonal cross bracing, drop test requirements of 49CFR173.465(1) and (2) were met and demonstrated through finite element analysis modeling. The development and use of this new container dramatically reduced the need for down-sizing the equipment and allowed the project to meet objectives within cost and schedule targets. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Combination of Cation Exchange and Quantized Ostwald Ripening for Controlling Size Distribution of Lead Chalcogenide Quantum Dots

A new strategy for narrowing the size distribution of colloidal quantum dots (QDs) was developed by combining cation exchange and quantized Ostwald ripening. Medium-sized reactant CdS(e) QDs were subjected to cation exchange to form the target PbS(e) QDs, and then small reactant CdS(e) QDs were added which were converted to small PbS(e) dots via cation exchange. The small-sized ensemble of PbS(e) QDs dissolved completely rapidly and released a large amount of monomers, promoting the growth and size-focusing of the medium-sized ensemble of PbS(e) QDs. The addition of small reactant QDs can be repeated to continuously reduce the size distribution. The new method was applied to synthesize PbSe and PbS QDs with extremely narrow size distributions and as a bonus they have hybrid surface passivation. In conclusion, the size distribution of prepared PbSe and PbS QDs are as low as 3.6% and 4.3%, respectively, leading to hexagonal close packing in monolayer and highly ordered three-dimensional superlattice.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The Effect of Monomer Size on Fusion and Coupling in Colloidal Quantum Dot Molecules

The fusion step in the formation of colloidal quantum dot molecules, constructed from two core/shell quantum dots, dictates the coupling strength and hence their properties and enriched functionalities compared to monomers. Herein, studying the monomer size effect on fusion and coupling, we observe a linear relation of the fusion temperature with the inverse nanocrystal radius. This trend, similar to that in nanocrystal melting, emphasizes the role of the surface energy. The suggested fusion mechanism involves intraparticle ripening where atoms diffuse to the reactive connecting neck region. Moreover, the effect of monomer size and neck filling on the degree of electronic coupling is studied by combined atomistic-pseudopotential calculations and optical measurements, uncovering strong coupling effects in small QD dimers, leading to significant optical changes. Understanding and controlling the fusion and hence coupling effect allows tailoring the optical properties of these nanoscale structures, with potential applications in photonic and quantum technologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-throughput and in situ EDXRD investigation on the formation of two new metal aminoethylphosphonates - Ca(O{sub 3}PC{sub 2}H{sub 4}NH{sub 2}) and Ca(OH)(O{sub 3}PC{sub 2}H{sub 4}NH{sub 3}){center_dot}2H{sub 2}O

The system Ca{sup 2+}/2-aminoethylphosphonic acid/H{sub 2}O/NaOH was systematically investigated using high-throughput methods. The experiments led to one new compound Ca(O{sub 3}PC{sub 2} H{sub 4}NH{sub 2}) (1) and the crystal structure was determined using in house X-ray powder diffraction data (monoclinic, P2{sub 1}/c, a=9.7753(3), b=6.4931(2), c=8.4473(2) A, {beta}=106.46(2) Degree-Sign , V=514.20(2) A{sup 3}, Z=4). The formation of 1 was investigated by in situ energy dispersive X-ray diffraction measurements (EDXRD) at beamline F3 at HASYLAB (light source DORIS III), DESY, Hamburg. An intermediate, Ca(OH)(O{sub 3}PC{sub 2}H{sub 4}NH{sub 3}){center_dot}2H{sub 2}O (2), was observed and could be isolated from the reaction mixture at ambient temperatures by quenching the reaction. The crystal structure of 2 was determined from XRPD data using synchrotron radiation (monoclinic, P2{sub 1}/m, a=11.2193(7), b=7.1488(3), c=5.0635(2) A, {beta}=100.13(4) Degree-Sign , V=399.78(3) A{sup 3}, Z=2). - Graphical abstarct: The detailed in situ energy dispersive X-ray diffraction (EDXRD) investigation on the formation of the new inorganic-organic hybrid compound Ca(O{sub 3}PC{sub 2}H{sub 4}NH{sub 2}) leads to the discovery of a new crystalline intermediate phase. Both crystal structures were elucidated using X-ray powder diffraction data. Highlights: Black-Right-Pointing-Pointer High-throughput investigation led to new metal aminoethylphosphonate Ca(O{sub 3}PC{sub 2}H{sub 4}NH{sub 2}). Black-Right-Pointing-Pointer The formation of Ca(O{sub 3}PC{sub 2}H{sub 4}NH{sub 2}) was followed by in situ EDXRD measurements. Black-Right-Pointing-Pointer The crystalline intermediate Ca(O{sub 3}PC{sub 2}H{sub 4}NH{sub 3})(OH){center_dot}2H{sub 2}O was discovered. Black-Right-Pointing-Pointer Isolation of Ca(O{sub 3}PC{sub 2}H{sub 4}NH{sub 3})(OH){center_dot}2H{sub 2}O was accomplished by quenching experiments. Black-Right-Pointing-Pointer The structures were determined using X-ray powder diffraction data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystal structure, spectroscopic, magnetic and electronic structure studies of a novel Cu(II) amino acid complex [Cu(L-arg){sub 2}(H{sub 2}O)]{sub 2}(P{sub 4}O{sub 12}){center_dot}8H{sub 2}O

Single crystals of a novel copper (II) complex with the amino acid L-arginine (L-arg) and cyclotetraphosphate, [Cu(L-arg){sub 2}(H{sub 2}O)]{sub 2}(P{sub 4}O{sub 12}){center_dot}8H{sub 2}O, were prepared in aqueous solution and were characterized by X-ray diffraction, spectroscopy (diffuse reflectance, UV-vis and IR) and thermal analysis. Magnetic measurements and electronic structure calculations were also performed. Crystal structure determination reveals that this compound has a nonsymmetrical atomic arrangement, containing mainly a binuclear [Cu(L-arg){sub 2}(H{sub 2}O)]{sub 2}{sup 4+} cation and an uncoordinated cyclotetraphosphate counter-anion (P{sub 4}O{sub 12}{sup 4-}). The tetravalent cation contains two independent Cu(II) ions in two different chemical environments. This compound exhibits an antiferromagnetic (AFM) to paramagnetic (PM) phase transition at a temperature (T{sub N}) lower than 2 K. The values of paramagnetic Curie-Weiss temperature ({theta}{sub cw}) and the exchange parameter (J/K{sub B}) emphasize the existence of an antiferromagnetic interaction between the neighboring copper ions. - Graphical abstract: The atomic arrangement of [Cu(L-arg){sub 2}(H{sub 2}O)]{sub 2}(P{sub 4}O{sub 12}){center_dot}8H{sub 2}O is built up of corrugated 2D-supramolecular layers and 1D-supramolecular anionic chain constructed by [P{sub 4}O{sub 12}(H{sub 2}O){sub 6}]{sub n}{sup 4n-}. Highlights: Black-Right-Pointing-Pointer Crystal structure of unusual cationic binuclear complex of [Cu(L-arg){sub 2}(H{sub 2}O)]{sub 2}(P{sub 4}O{sub 12}){center_dot}8H{sub 2}O. Black-Right-Pointing-Pointer An anti-syn equatorial-apical carboxylate bridging mode of both copper (II) centers. Black-Right-Pointing-Pointer [Cu(L-arg){sub 2}(H{sub 2}O)]{sub 2}{sup 4+} are held together by extensive H-bonds into wave-like layer. Black-Right-Pointing-Pointer Magnetic measurements exhibit an antiferomagnetic interaction between Cu(II). Black-Right-Pointing-Pointer Electronic structure calculation confirms the insulator state of the complex.

36 MATERIALS SCIENCE↗

Synthesis, characterization and crystal structure of a novel Strandberg-type polyoxoselenomolybdate Rb{sub 4}[Se{sub 2}Mo{sub 5}O{sub 21}]{center_dot}2H{sub 2}O

Graphical abstract: Crystal structure of Rb{sub 4}[Se{sub 2}Mo{sub 5}O{sub 21}]{center_dot}2H2O. Highlights: Black-Right-Pointing-Pointer Synthesis of the first Strandberg-type polyoxoselenomolybdate Rb{sub 4}[Se{sub 2}Mo{sub 5}O{sub 21}]{center_dot}2H{sub 2}O. Black-Right-Pointing-Pointer Characterization of the novel compound. Black-Right-Pointing-Pointer Chirality of the space group C2 of compound implies that it is expected to have nonlinear optical (NLO) properties -- Abstract: An inorganic compound formulated as Rb{sub 4}[Se{sub 2}Mo{sub 5}O{sub 21}]{center_dot}2H{sub 2}O (1) has been isolated by conventional solution method and structurally characterized by single-crystal X-ray diffraction methods, scanning electron microscopy (SEM), powder XRD, IR, UV-vis spectra, and cyclic voltammetry measurements. This compound crystallizes in the monoclinic system, space group C2 with unit a = 19.701 (3) Angstrom-Sign , b = 10.296 (2) Angstrom-Sign , c = 12.134 (4) Angstrom-Sign , {beta} = 106.96 (2) Degree-Sign and Z = 4. The crystal structure of (1) is built up from a Strandberg clusters connected through hydrogen-bonding interactions into a three-dimensional supramolecular network.

36 MATERIALS SCIENCE↗

Evidence of Skewness and Sub-Gaussian Character in Temperature-Dependent Distributions of One Million Electronic Excitation Energies in PbS Quantum Dots

Obtaining statistical distributions by sampling a large number of conformations is vital for an accurate description of temperature-dependent properties of chemical systems. However, constructing distributions with 105??106 samples is computationally challenging because of the prohibitively high computational cost of performing rst-principles quantum-mechanical calculations. In this work, we present a new technique called the Eective Stochastic Potential Conguration Interaction Singles (ESP-CIS) method to obtain excitation energies. The ESP-CIS method uses random matrix theory for the construction of an eective stochastic representation of the Fock operator and combines it with linear-response theory. Here, we perform excitation calculations on PbS quantum dots (0.75-1.75 nm) at temperatures of 200-400 K. Results from a total of 15 million excitation energy calculations (1 million samples for each of the three dots at ve dierent temperatures) revealed the distributions to be sub-Gaussian in nature with negative skewness. The distributions progressively became red-shifted with increasing temperature. The study shows that random distortions in structure from the minimum-energy geometry of these quantum dots are more likely to lower the excitation energies.

Scher, Jeremy A.↗