Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Dissolved Gas”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Carbon catalysis in the aqueous oxidation of SO2 by NO2 and air

Sulfur dioxide and an oxidant gas (air or NO2) were bubbled through aqueous suspensions of both washed and unwashed carbon black as well as through samples of wash water, which contained whatever soluble species were originally present on the carbon, and high-purity water. The sulfate yields obtained showed the washed and unwashed carbon to be equally catalytic for the oxidation of SO2 to sulfate by both oxidants, whereas little sulfate was generated in either the wash water or high-purity water in the absence of carbon. These results indicate that the sulfate yields produced in aqueous suspensions of the carbon studied are due to catalysis by the carbon particles rather than by soluble species dissolved from them.

Schryer, D. R.↗

Active Control of pH in the Bioculture System Through Carbon Dioxide Control

For successful cell research, the growth culture environment must be tightly controlled. Deviance from the optimal conditions will mask the desired variable being analyzed or lead to inconstancies in the results. In standard laboratories, technology and procedures are readily available for the reliable control of variables such as temperature, pH, nutrient loading, and dissolved gases. Due to the nature of spaceflight, and the inherent constraints to engineering designs, these same elements become a challenge to maintain at stable values by both automated and manual approaches. Launch mass, volume, and power usage create significant constraints to cell culture systems; nonetheless, innovative solutions for active environmental controls are available. The acidity of the growth media cannot be measured through standard probes due to the degradation of electrodes and reliance on indicators for chromatography. Alternatively, carbon dioxide sensors are capable of monitoring the pH by leveraging the relationship between the partial pressure of carbon dioxide and carbonic acid in solution across a membrane. In microgravity cell growth systems, the gas delivery system can be used to actively maintain the media at the proper acidity by maintaining a suitable gas mixture around permeable tubing. Through this method, launch mass and volume are significantly reduced through the efficient use of the limited gas supply in orbit.

cell growth↗

Geothermal Power Production: Alternative Scenarios and Critical Issues

This is the last in a series of reports that completes the life cycle analyses (LCAs) of geothermal power production technologies conducted by Argonne National Laboratory. It addresses the remaining critical issues pertaining to the LCAs of geothermal electricity production: the relative contributions from plant operations and maintenance (O&M), from decommissioning (dcm), from well field exploration, and from plant operational greenhouse gas (GHG) emissions to the total life cycle performance of geothermal power plants. Contributions from O&M and dcm to the performance of other power generating technologies are also discussed. Also included in this study are LCA results for a new series of scenarios for geothermal power production. Our analysis uses fossil fuel energy consumption and GHG emissions per unit of lifetime electricity output (referred to as the fossil energy and GHG ratios, respectively) as the life cycle metrics for quantifying life cycle stage contributions to their corresponding totals, which were subsequently used for comparing the environmental performance of geothermal and other electric power production plants. Based on literature results, we concluded that the contribution from dcm to both ratios is negligible for power plants in general. Further, we found that the contribution from O&M to both ratios is generally significant for facilities with no fuel cycle (fuel production and use) burdens. In the case of geothermal power production, O&M contributes about 20% to the total for enhanced geothermal power plants, 10% for geothermal binary plants, and about 25% of the energy ratio for geothermal flash and dry steam plants. However, due to operational GHG emissions that are unique among geothermal power plants, O&M contributes only about 1% of total GHG ratios for flash and dry steam plants. These GHG emissions arise when the geofluids of these plants become exposed to the atmosphere, thus releasing dissolved GHGs. The amount of GHG emissions from these plants had a wide range. However, we found that 85% of California’s running capacity in flash and dry steam plants released 160 grams or less per kilowatt-hour of electricity produced. We developed an exploration model to account for core hole, slim hole, and confirmation well drilling that includes a probability of success for confirmation well drilling. The model shows that well field exploration represents about 20% of the total life cycle burden for large geothermal plants with numerous wells and 32% of the burden for small plants with few wells. We also analyzed a set of geothermal scenario pairs. The objective was to identify geothermal scenarios with a lower levelized cost of electricity and lower life cycle burdens. A comparison of reference with improved cases within each pair revealed that the improved cases demonstrated a lower levelized cost of electricity and lower fossil energy consumption and GHG metrics. The scenario pairs covered a range of plant capacities, well numbers and depths, resource temperatures, and plant lifetimes. Finally, we found that compared to fossil-fuel generation of electricity, both flash and dry steam geothermal electricity generation result in fewer GHG emissions: on average, only one-fifth of the GHG emissions per kilowatt-hour from a natural gas combined-cycle plant, and one-tenth of those from a coal-fired plant. Moreover, these fractions were much smaller when the fossil plants were compared with plants that use geothermal binary technology.

Sullivan, J. L.↗

Impacts of glass composition, pH, and temperature on glass forward dissolution rate

Nuclear waste glasses dissolve at the forward dissolution rate (r f ) in very dilute aqueous solutions, which can isolate the impact of the glass composition from solution feedback and alteration product effects. While it has long been known that pH and temperature (T) strongly impact r f , the impacts of glass composition have remained uncertain. In this work, r f data from 19 nuclear waste glasses were used with the aim of identifying the effect of glass composition on r f . The r f values were modeled as: r f = k 0 10 –ηpH exp(-E a /RT), with k 0 , η, E a , and R, respectively, being the intrinsic rate constant, pH coefficient, apparent activation energy, and gas constant. However, no predictive correlation could be established between the individual model parameters (log[k 0 ], η, and E a ) and glass composition for the glasses considered in this study, an outcome that was attributed to the strong positive correlation between the log[$k_0$] and E a parameters. Therefore, a model was fitted directly to the combined r f from all 19 glasses. This approach showed that 90% of the variation in r f data could be accounted for solely by T and pH effects. Therefore, any composition effects must be relatively small. After normalizing for differences in pH and T, the only notable differences in r f between the glasses were found to correlate with variations in the fraction of glass forming tetrahedra contributed by tetrahedral boron, $f$([ 4 ]B), with an abrupt threshold at a high value of $f$([ 4 ]B) (~0.22), where higher r f are predicted with no discernable composition effects below the threshold.

36 MATERIALS SCIENCE↗

Internal Heterogeneous Processes in Aluminum Combustion

This paper discusses the aluminum particle combustion mechanism which has been expanded by inclusion of gas dissolution processes and ensuing internal phase transformations. This mechanism is proposed based on recent normal and microgravity experiments with particles formed and ignited in a pulsed micro-arc. Recent experimental findings on the three stages observed in Al particle combustion in air and shows the burning particle radiation, trajectory (streak), smoke cloud shapes, and quenched particle interiors are summarized. During stage I, the radiation trace is smooth and the particle flame is spherically symmetric. The temperature measured using a three-color pyrometer is close to 3000 K. Because it exceeds the aluminum boiling point (2730 K), this temperature most likely characterizes the vapor phase flame zone rather than the aluminum surface. The dissolved oxygen content within particles quenched during stage I was below the detection sensitivity (about 1 atomic %) for Wavelength Dispersive Spectroscopy (WDS). After an increase in the radiation intensity (and simultaneous decrease in the measured color temperature from about 3000 to 2800 K) indicative of the transition to stage II combustion, the internal compositions of the quenched particles change. Both oxygen-rich (approx. 10 atomic %) and oxygen-lean (< 1 %) regions are identified within the particles using back-scattered electron imaging and WDS. During stage II, oscillations are observed in particle radiation and the flame and smoke cloud are distorted from their original spherically-symmetric shape. In stage III, particle radiation continues to exhibit oscillations, but its radiation intensity drops and remains at a nearly constant level. The measured temperature decreases to about 2300 K. Also, larger changes in particle velocities are observed, and oxide caps are found on quenched particle surfaces. While these results showed the correlation between the aluminum particle combustion behavior and the evolution of its internal composition, the change from the spherically symmetric to asymmetric flame shape occurring upon the transition from stage I to stage II combustion could not be understood based only on the fact that dissolved oxygen is detected in the particles. The connection between the two phenomena appeared even less significant because in earlier aluminum combustion studies carried in O2/Ar mixtures, flame asymmetry was not observed as opposed to experiments in air or O2/CO mixtures. It has been proposed that the presence of other gases, i.e., hydrogen, or nitrogen causes the change in the combustion regime.

Dreizin, E. L.↗

Technetium oxidation in slag-based sodium salt waste forms exposed to water and moist Hanford soil - 15514

Several U.S. DOE sites use or plan to use waste forms and/or concrete containment structures for radioactive waste disposal that are designed to have a chemically reducing environment to immobilize selected contaminants such as Tc(VII)O{sub 4}{sup -} and Cr(VI)O{sub 4}{sup 2-}. These waste forms and containment structures are typically deployed in near surface unsaturated oxidizing environments. Consequently, the effect of exposure to air (oxygen) and water containing dissolved oxygen during production, during the period of institutional control, and over the long term period of performance is important for predicting the speciation and mobility of the redox sensitive radioactive and stable contaminants. Both the SRS and Hanford waste streams contain soluble technetium which may require stabilization to meet disposal requirements. Technetium stabilization is a difficult problem because: 1) Tc is soluble and very mobile in the oxidized form typical of near surface environments, and 2) Tc-99 is a long-lived isotope with a half-life of 2.1 E+05 years which places demanding requirements on the engineered barriers and environment to meet current regulatory disposal requirements. A depth-discrete sampling and leaching method approach for measuring contaminant oxidation rate (effective contaminant specific oxidation rate) was used in this study. The method was modified by coating all sides of a cylindrical sample with an impermeable epoxy and cutting a fresh surface 2 to 2.5 cm from the original top surface eliminates sample inhomogeneity as the result of settling as a reason from observed results and provides 1-D soluble ion transport and gas transport information. Soluble Tc was leached from all of the depth-discrete sub-samples from both Tc2-9 and Tc2-10 which strongly suggests that oxygen was present in the entire length of both samples. About 24 mass percent of the Tc in the original sample, was leached (soluble) from sub-samples between 0.8 and 46 mm below the exposed surface of Tc2-9 (exposed to Hanford sediment). The same percent (24%) was leached from the sub-samples between 0.8 and 11 mm below the exposed surface of Tc2-10 (exposed to DI water). This suggests that the rate of oxygen migration into the sample exposed to soil was faster than the rate of migration into the sample exposed to water which is consistent with the more rapid transport of ions through a gas phase as compared to a liquid phase. It is assumed that moisture in the Hanford sediment was not sufficient to completely block the surface pores with respect to gas transport across the soil-waste form boundary. Based on nitrate leaching results for the depth- discrete sub-samples, regions depleted in nitrates were identified from the top surfaces to 9.5 and 3 mm into samples Tc2-9 (exposed to moist Hanford sediment) and Tc2-10 (DI water). Low mass fractions of nitrate were leached from these depth-discrete samples compared to samples further from the exposed surface presumably because a significant portion of the nitrate had already migrated into the soil or water, respectively. Depth-discrete sub-sample leaching results for Na can be interpreted in the same way over the same regions in the two samples tested. In conclusion, leaching monolithic porous cementitious waste forms in water appears to be conservative for non-redox sensitive contaminants. However, leaching data obtained under saturated exposure conditions do not appear to be conservative for redox sensitive contaminants which are easily oxidized. Leaching crushed samples in water still seems to be a conservative approach to estimating the concentrations of soluble contaminants in a waste form. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Evidence for Adsorption of Chlorine Species on Iron (III)(Hydr)oxides in the Sheepbed Mudstone, Gale Crater, Mars

Ancient aquatic environments in Yellowknife Bay, Gale crater, Mars, could create favorable conditions for adsorption of chlorine compounds (perchlorate and chloride) on Fe (III) (hydr)oxides present in the Sheepbed mudstone, such as akaganeite and ferrihydrite. In this work, 5.2 mM ClO4− and 1.7 to 12 mM Cl− were adsorbed onto ferrihydrite and 5.2 mM ClO4− was adsorbed onto akaganeite at ultraacidic (pH 2–2.5), acidic (pH 3.8–4.5), and near‐neutral (pH 6.2–7.7) pH. Samples were characterized by evolved gas analysis and compared to the data collected for the Cumberland sample from the Sheepbed mudstone. Evolved gas analysis showed that ferrihydrite with 0.5–1 wt.% ClO4− adsorbed under ultraacidic and acidic conditions had a well‐resolved O2 peak at 306 °C due to the thermal decomposition of adsorbed ClO4−. All akaganeite samples with 0.5 wt.% adsorbed ClO4− had a weak peak at 312 °C tentatively assigned to decomposing perchlorate. Evolved gas analysis demonstrated that 0.5–2 wt.% Cl− adsorbed on ferrihydrite at ultraacidic and acidic pH was the main contributor to HCl evolved at >470 °C. Comparison with martian observations indicated that the temperature of the O2 peak originating from ClO4− adsorbed on ferrihydrite matched well with the thermal evolution of O2 from the Cumberland. Evolved HCl originating from Cl− adsorbed on ferrihydrite was within the temperature range of the high‐temperature HCl release from Cumberland (~770 °C). These observations suggest that ferrihydrite containing adsorbed ClO4− and Cl− could exist in the mudstone. Experimental results are consistent with adsorption at acidic pH < 4 environments through postdepositional water‐rock interactions of ferrihydrite with acid‐sulfate groundwater containing dissolved chloride and perchlorate.

T. S. Peretyazhko↗

Tritium Content in and Release from Pressurized-Water-Reactor Fuel Cladding

It is expected that tritium pretreatment will be required in future reprocessing plants to prevent the release of tritium to the environment (except for long-cooled fuels; >30 yrs). To design and operate future reprocessing plants in a safe and environmentally compliant manner, the amount and form of tritium in the used nuclear fuel (UNF) must be understood and quantified. Tritium in light water reactor (LWR) fuel is dispersed between the fuel matrix and the fuel cladding, and some tritium may be in the plenum, probably as tritiated water (THO or T{sub 2}O). In a standard processing flowsheet, tritium management would be accomplished by treatment of liquid streams within the plant. Pretreating the fuel prior to dissolution to release the tritium into a single off-gas stream could simplify tritium management, so the removal of tritium in the liquid streams throughout the plant may not be required. The fraction of tritium remaining in the cladding may be reduced as a result of tritium pretreatment. Since Zircaloy'R cladding makes up roughly 25% by mass of UNF in the United States, processes are being considered to reduce the volume of reprocessing waste attributed to Zircaloy'R clad fuel by recovering the zirconium from the cladding for reuse. Treatment options for Zircaloy cladding include recycling to recover the significant value of the zirconium and eliminate costs associated with the disposal of transuranic-contaminated Zircaloy. If LWR fuel is reprocessed and the fuel is dissolved without tritium pretreatment, the tritium in the cladding will remain bound to the cladding. If tritium pretreatment is included in the flow sheet, some portion of the tritium in the cladding may be released along with the tritium from the fuel matrix. To design and operate reprocessing plants in a safe and environmentally compliant manner, the amount and form of tritium in the UNF must be understood and quantified. For Zircaloy-clad fuels from light water reactors, the tritium produced from ternary fission and other sources is expected to be divided between the fuel, where it is generated, and the cladding. It has been previously documented that a fraction of the tritium produced in uranium oxide fuel from LWRs can migrate and become trapped in the cladding. Estimates of the percentage of tritium in the cladding typically range from 0-96%. There is relatively limited data on how the tritium content of the cladding varies with burnup and fuel history (temperature, power, etc.) and how pretreatment impacts its release. The present study was undertaken to understand how tritium pretreatment at standard tritium pretreatment conditions (oxidation in air at 480 to 600 deg. C) affects the tritium content in the Zircaloy cladding and the extent to which the tritium content could be reduced with modest increases in the tritium pretreatment temperature. The data indicate that <20% of the tritium in PWR cladding will be removed by pretreatment at 500-700 deg. C for 24 h. Essentially 100% of the tritium will likely be released if the heating time at 700 deg. C is extended to 96 h. Small amounts of tritium are expected to be released if the cladding is heated at ≤ 600 deg. C for up to 96 h. The results of this study indicate that the amount of tritium released from tritium pretreatment systems will be dependent on both the operating temperature and length of time in the pretreatment system. Under certain conditions, a significant fraction of the tritium could remain bound in the cladding and would need to be considered in any subsequent processing of the cladding to recover/recycle the zirconium. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Chamber measurements of high CO 2 emissions from a rainforest stream receiving old C-rich regional groundwater

Carbon emissions from fluvial systems are a key component of local and regional carbon cycles. We used floating chambers to investigate the CO 2 flux from stream water to air (f CO 2 ) in the Arboleda, a stream in the lowland rainforest of Costa Rica, fed partly by old regional groundwater high in dissolved inorganic carbon (DIC). Drifting and static chambers showed f CO 2 averaging 35.5 and 72.7 μmol C m –2 s –1 , respectively, bracketing the previously-published f CO 2 value of 56 μmol C m –2 s –1 obtained using tracer methods in this stream. These values are much higher than most f CO 2 data in the literature and reflect a large flux of deep crustal (non-biogenic) CO 2 out of the Arboleda, a flux that does not represent a component of ecosystem respiration. Static chambers appeared to overestimate f CO 2 by creating artificial turbulence, while drifting chambers may have underestimated f CO 2 by under-sampling areas of potentially high gas exchange (e.g., riffles around coarse woody debris obstructions). Both static and drifting chambers revealed high spatial heterogeneity in f CO 2 at the scale of 5–30 m reaches. Some observed temporal trends were localized, e.g., among three reaches with repeated measurements through the wet and dry seasons, (1) only the reach located between the other two showed significantly lower f CO 2 during the dry season, and (2) the highest and lowest f CO 2 were consistently observed in the reaches farthest upstream and downstream, respectively. As a result, streams like the Arboleda receiving significant inputs of high-DIC regional groundwater merit additional study as hotspots for C emissions from terrestrial ecosystems.

54 ENVIRONMENTAL SCIENCES↗

Management and dewatering of brines extracted from geologic carbon storage sites

Subsurface pressure management is a significant challenge in geologic CO 2 storage. Elevated pressure generated from the injection of supercritical CO 2 can be managed by the withdrawal of brine from saline formations before or during CO 2 injection; however, management of the extracted brines is non-trivial because they may have high concentrations of dissolved solids and other contaminants. Dewatering a brine can reduce the volume needing disposal; in addition, water separated from the brine can be a source of usable low salinity water. This review will summarize the composition of brines extracted from select domestic geologic CO 2 storage sites, will calculate the minimum of work of dewatering, and will provide a critical review of developed and developing desalination/dewatering technologies that could be applied to brines extracted from saline formations before or during geologic CO 2 storage operations. Herein are also highlighted, when appropriate, the similarities and the differences between dewatering brines produced from oil/gas operations and brines extracted from geologic CO 2 storage. Since a source of steam or natural gas is likely unavailable/unsuitable for dewatering brines extracted during CO 2 storage, the ideal treatment processes should have a high electrical efficiency and, if possible, should be able to take advantage of the inherent elevated temperature of these brines.

42 ENGINEERING↗

Performance Evaluation of a High Salinity Produced Water Treatment Train: Chemical Analysis and Aryl Hydrocarbon Activation

Water scarcity and increased energy demands have put a strong focus on improving industries at the heart of the water–energy nexus. Treatment of oil and gas produced water (PW) can help reduce freshwater consumption during hydraulic fracturing, especially in arid regions, while also removing harmful contaminants from entering the environment. However, it is also difficult to treat because PW contains high concentrations of many environmentally toxic contaminants, which require complex and expensive treatment processes to achieve their removal. To demonstrate the possibility of PW treatment and reuse in the O&G industry, a comprehensive environmental toxicity and water quality analysis throughout a five-process treatment train was performed on high salinity (>120 g/L) Permian basin raw PW. Here, the concentrations of naturally occurring radioactive materials were reduced by over 99%, total organic carbon was reduced by 93%, and inorganic constituents, including total dissolved solids, were reduced by over 99%. Compounds that induced the aryl hydrocarbon receptor and caused cytotoxicity in MCF-7 cells were also removed. Overall, the results of this study show that a short treatment train (five distinct unit processes) can be effective in treating PW to a level suitable for use outside of the oil industry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterization of deep weathering and nanoporosity development in shale - a neutron study

We used small-angle and ultra-small-angle neutron scattering (SANS/USANS) to characterize the evolution of nanoscale features in weathering Rose Hill shale within the Susquehanna/Shale Hills Observatory (SSHO). The SANS/USANS techniques, here referred to as neutron scattering (NS), characterize porosity comprised of features ranging from approximately 3 nm to several micrometers in dimension. NS was used to investigate shale chips sampled by gas-powered drilling ('saprock') or by hand-augering ('regolith') at ridgetop. At about 20 m depth, dissolution is inferred to have depleted the bedrock of ankerite and all the chips investigated with NS are from above the ankerite dissolution zone. NS documents that 5--6% of the total ankerite-free rock volume is comprised of isolated, intraparticle pores. At 5 m depth, an abrupt increase in porosity and surface area corresponds with onset of feldspar dissolution in the saprock and is attributed mainly to peri-glacial processes from 15 000 years ago. At tens of centimeters below the saprock-regolith interface, the porosity and surface area increase markedly as chlorite and illite begin to dissolve. These clay reactions contribute to the transformation of saprock to regolith. Throughout the regolith, intraparticle pores in chips connect to form larger interparticle pores and scattering changes from a mass fractal at depth to a surface fractal near the land surface. Pore geometry also changes from anisotropic at depth, perhaps related to pencil cleavage created in the rock by previous tectonic activity, to isotropic at the uppermost surface as clays weather. In the most weathered regolith, kaolinite and Fe-oxyhydroxides precipitate, blocking some connected pores. These precipitates, coupled with exposure of more quartz by clay weathering, contribute to the decreased mineral-pore interfacial area in the uppermost samples. These observations are consistent with conversion of bedrock to saprock to regolith at SSHO due to: (1) transport of reactants (e.g., water, O{sub 2}) into primary pores and fractures created by tectonic events and peri-glacial effects; (2) mineral-water reactions and particle loss that increase porosity and the access of water into the rock. From deep to shallow, mineral-water reactions may change from largely transport-limited where porosity was set largely by ancient tectonic activity to kinetic-limited where porosity is changing due to climate-driven processes.

58 GEOSCIENCES↗

Calcined Polyethyleneimine Coated Optical Fibers for Distributed pH Monitoring at High Pressures and Temperatures

In the oil and gas, CO2 sequestration, H2 subsurface storage, and geothermal energy sectors, subsurface pH measurements are critical for monitoring the geochemical conditions and estimating potential corrosion rates of wellbore systems. Real-time pH measurements in these conditions are vital for detecting and predicting corrosion deterioration of wellbore components that may jeopardize the safety and continued operation of wellbore systems. Building off of earlier TiO2 based pH sensors and the known pH sensitivity of amine-based polymers, a coating based on the secondary amine polymer polyethyleneimine (PEI) was developed. The sensor coating was treated with a high temperature (500 °C) calcination procedure in air to convert it into a more stable oxidized coating capable of withstanding hot aqueous solutions without dissolving while retaining linear pH sensitivity from pH values between 2 and 11. The sensor performance was measured using optical transmission measurements in solutions of various pHs and using optical backscatter reflectometry for distributed pH sensing demonstration in wellbore-relevant pressures (up to 1000 psi) and temperatures (80 °C). A calibration curve with strong differentiation between acidic and alkaline pH was developed for both transmission-based and distributed pH measurements, using fixed wavelength transmission and integrated linear amplitude of backscattered light for distributed measurements.

Shumski, Alexander↗

Liquid solution centrifugation for safe, scalable, and efficient isotope separation

A general method of separating isotopes by centrifuging dissolved chemical compounds in a liquid is introduced. This technique can be applied to almost all elements and leads to large separation factors. The method has been demonstrated in several isotopic systems including Ca, Mo, O, and Li with single-stage selectivities of 1.046 to 1.067 per neutron mass difference (e.g., 1.43 in 40 Ca/ 48 Ca), which are beyond the capabilities of various conventional methods. Equations are derived to model the process, and the results agree with those of the experiments. The scalability of the technique has been demonstrated by a three-stage enrichment of 48 Ca with a total 40 Ca/ 48 Ca selectivity of 2.43, and the scalability is more broadly supported through analogies to gas centrifuge, whereby countercurrent centrifugation can further multiply the separation factor by 5 to 10 times per stage in a continuous process. Optimal centrifuge conditions and solutions can achieve both high-throughput and highly efficient isotope separation.

07 ISOTOPE AND RADIATION SOURCES↗

Thaw Transitions and Redox Conditions Drive Methane Oxidation in a Permafrost Peatland

Thawing permafrost, ground that has been frozen for 2 or more years, often results in wet conditions that promote the production of methane (CH 4 ). Methane is a greenhouse gas that is over 30 times more powerful than carbon dioxide at warming the atmosphere. Microorganisms called methanotrophs can consume a substantial portion of this CH 4 before it reaches the atmosphere, but the extent of this consumption is not well understood. Methanotrophs are affected by environmental conditions, such as oxygen availability, that change with permafrost thaw. We used laboratory experiments to measure how quickly methanotrophs consume CH 4 from sites within a permafrost peatland with little, intermediate, and full permafrost thaw. We found that CH 4 consumption increased as permafrost thawed and that sites transitioning between thaw stages had a different potential to consume CH 4 than intact and fully thawed sites. Methane consumption was also high in locations with low dissolved oxygen, which suggests that methanotrophs in these sites may tolerate low oxygen conditions in the field. We found that redox potential, a measurement that describes the tendency for a compound to be oxidized or reduced, was a strong predictor of CH 4 consumption in partially and fully thawed sites. Overall, these measurements highlight the potential for methanotrophs to mitigate CH 4 emissions in peatlands with thawing permafrost and provide new insights to modeling CH 4 dynamics across the full thaw gradient.

54 ENVIRONMENTAL SCIENCES↗

Methane ignition catalyzed by in situ generated palladium nanoparticles

Catalytic ignition of methane over the surfaces of freely-suspended and in situ generated palladium nanoparticles was investigated experimentally and numerically. The experiments were conducted in a laminar flow reactor. The palladium precursor was a compound (Pd(THD){sub 2}, THD: 2,2,6,6-tetramethyl-3,5-heptanedione) dissolved in toluene and injected into the flow reactor as a fine aerosol, along with a methane-oxygen-nitrogen mixture. For experimental conditions chosen in this study, non-catalytic, homogeneous ignition was observed at a furnace temperature of {proportional_to}1123 K, whereas ignition of the same mixture with the precursor was found to be {proportional_to}973 K. In situ production of Pd/PdO nanoparticles was confirmed by scanning mobility, transmission electron microscopy and X-ray photoelectron spectroscopy analyses of particles collected at the reactor exit. The catalyst particle size distribution was log-normal. Depending on the precursor loading, the median diameter ranged from 10 to 30 nm. The mechanism behind catalytic ignition was examined using a combined gas-phase and gas-surface reaction model. Simulation results match the experiments closely and suggest that palladium nanocatalyst significantly shortens the ignition delay times of methane-air mixtures over a wide range of conditions. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dated soil C–N–P profiles, water quality, and chamber fluxes across Ohio and Michigan wetlands (2024–2025)

This dataset includes dated soil core chemistry (bulk density, phosphorus, nitrogen and carbon concentrations), water quality, and chamber flux measurements collected from wetlands in the Midwest United States—12 sites in Ohio, one site in Indiana, one site in Michigan—collected in the spring or summer of 2024 or 2025, all in (.csv) format. These data were generated to examine how wetland restoration, management activities, and time since restoration affect biogeochemical processes, carbon sequestration, nutrient accumulation, water quality, and greenhouse gas emissions. Specifically, these data aim to investigate how restored wetlands differ from natural wetlands in terms of carbon, nitrogen, phosphorus dynamics, as well as carbon dioxide and methane fluxes. Also included are surface and porewater quality parameters and chamber flux measurements across these different wetlands. Sampling was conducted at various sites representing a range of restoration stages, from about 4 years post-restoration up to 105 years post-restoration, and also includes a natural wetland used as a reference in Michigan. These data can be used to determine carbon sequestration rates, nutrient cycling, and to enhance our understanding of biogeochemical responses to wetland restoration in temperate ecosystems. This data package contains (1) a csv file (Water_Quality.csv) containing water quality data (dissolved organic carbon, total dissolved nitrogen, and temperature) organized by location; (2) a csv file (Soil_C_N_P_Seq.csv) containing carbon, nitrogen, and phosphorus concentrations at each soil level and time of each soil level, as well as their sequestration rates; (3) a csv file (CH4_CO2_Flux.csv) including methane and carbon dioxide fluxes that were measured with a chamber; (4) a file-level metadata (FLMD.csv) file that lists each file contained in the dataset with associated metadata; (5) a data dictionary (DD.csv) file that contains terms/column headers used throughout the files along with a definition, units, and data type; and (6) a locations metadata file (Location_metadata.csv).

Earth Science > Atmosphere > Atmospheric Chemistry↗

Assessment of inhalation and ingestion doses from exposure to radon gas using passive and active detecting techniques

The aim of this study was to assess an environmental hazard of radon exhalation rate from the samples of soil and drinking water in selected locations in Iraqi Kurdistan, passive (CR-39NTDs) and active (RAD7) detecting techniques has been employed. Long and short term measurements of emitted radon concentrations were estimated for 124 houses. High and lower radon concentration in soil samples was in the cities of Hajyawa and Er. Tyrawa, respectively. Moreover, for drinking water, high and low radon concentration was in the cities of Similan and Kelak, respectively. A comparison between our results with that mentioned in international reports had been done. Average annual dose equivalent to the bronchial epithelium, stomach and whole body in the cities of Kelak and Similan are estimated, and it was varied from 0.04{+-}0.01 mSv to 0.547{+-}0.018 mSv, (2.832{+-}0.22)x10{sup -5} to (11.972{+-}2.09)x10{sup -5} mSv, and (0.056 {+-}0.01) x10{sup -5} to (0.239{+-}0.01)x10{sup -5} mSv, respectively. This indicated that the effects of dissolved radon on the bronchial epithelium are much than on the stomach and whole body. (authors)

54 ENVIRONMENTAL SCIENCES↗