Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Directed evolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Linking void and interphase evolution to electrochemistry in solid-state batteries using operando X-ray tomography

Despite progress in solid-state battery engineering, our understanding of the chemo-mechanical phenomena that govern electrochemical behavior and stability at solid-solid interfaces remains limited compared to solid-liquid interfaces. Here, we use operando synchrotron X-ray computed microtomography to investigate the evolution of lithium/solid-state electrolyte interfaces during battery cycling, revealing how the complex interplay among void formation, interphase growth, and volumetric changes determines cell behavior. Void formation during lithium stripping is directly visualized in symmetric cells, and the loss of contact that drives current constriction at the interface between lithium and the solid-state electrolyte (Li10SnP2S12) is quantified and found to be the primary cause of cell failure. The interphase is found to be redox-active upon charge, and global volume changes occur due to partial molar volume mismatches at either electrode. Finally, these results provide new insight into how chemo-mechanical phenomena can impact cell performance, which is necessary to understand for the development of solid-state batteries.

42 ENGINEERING↗
DOE OSTI2022

Strain-retardant coherent perovskite phase stabilized Ni-rich cathode

The use of state-of-the-art Ni-rich layered oxides (LiNi x Co y Mn 1-x-y O 2 , x > 0.5) as the cathode material for lithium-ion batteries can push the energy and power density to a higher level than is currently available. However, volume variation associated with anisotropic lattice strain and stress that is being developed during lithium (de) intercalation induces severe structural instability and electrochemical decay of the cathode materials, which is amplified further when the battery is operating at a high voltage (above 4.5 V), which is essential for unlocking its high energy. Even after much effort by the research community, an intrinsic strain-retardant method for directly alleviating the continuous accumulation of lattice strain remains elusive. By introducing a coherent perovskite phase into the layered structure functioning as a ‘rivet’, we significantly mitigate the pernicious structural evolutions by a pinning effect. The lattice strain evolution in every single cycle is markedly reduced by nearly 70% when compared with conventional materials, which significantly enhances morphological integrity leading to a notable improvement in battery cyclability. This strain-retardant approach broadens the perspective for lattice engineering to release the strain raised from lithium (de)intercalation and paves the way for the development of high-energy-density cathodes with long durability.

25 ENERGY STORAGE↗
DOE OSTI2020

Scaling behavior of low-temperature orthorhombic domains in the prototypical high-temperature superconductor La 1.875 Ba 0.125 CuO 4

Structural symmetry breaking and recovery in condensed-matter systems are closely related to exotic physical properties such as superconductivity (SC), magnetism, spin density waves, and charge density waves (CDWs). The interplay between different order parameters is intricate and often subject to intense debate, as in the case of CDW order and superconductivity. In La 1.875 Ba 0.125 CuO 4 (LBCO), the low-temperature structural domain walls are hypothesized as nanometer-scale pinning sites for the CDWs. Coherent x-ray diffraction techniques have been employed here to visualize the domain structures associated with these symmetry changes directly during phase transition. We have pushed Bragg coherent diffractive imaging (BCDI) into the cryogenic regime where most phase transitions in quantum materials reside. Utilizing BCDI, we image the structural evolution of LBCO microcrystal samples during the high-temperature tetragonal to low-temperature orthorhombic (LTO) phase transition. Our results show the formation of LTO domains close to the transition temperature and how the domain size decreases with temperature. In conclusion, the number of domains follows the secondary order parameter (or orthorhombic strain) measurement with a critical exponent that is consistent with the three-dimensional universality class.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Development of a BlueCRAB/MELCOR Framework for Supporting Realistic Mechanistic Source Term Calculations in Microreactors

Efforts are currently underway to deploy microreactor modeling and simulation tools to better support vendors and regulatory authorities in submitting and reviewing licensing applications. In particular, the Nuclear Regulatory Commission is expected to rely on the Comprehensive Reactor Analysis Bundle (BlueCRAB) multiphysics toolset in performing design- and beyond-design-basis accident analyses. In addition, the Nuclear Regulatory Commission has been using the MELCOR code to estimate mechanistic source terms during accidents. As MELCOR relies on isotopic inventory and reactor temperature/power evolution profiles during accident conditions—all of which can theoretically be obtained from BlueCRAB—the ultimate goal of this activity is to establish a common BlueCRAB-MELCOR framework. However, prior to the present research, BlueCRAB had never been used to calculate such quantities of interest at the full-core level. While there are many Monte Carlo (MC) codes capable of computing such quantities of interest, they are unable to readily account for multiphysics feedback. BlueCRAB allows for the coupling of different physics codes together to perform multiphysics-informed calculations. Therefore, the purpose of this fiscal year 2023 work is to investigate the feasibility and challenges of performing such calculations within BlueCRAB so as to generate the data that MELCOR relies on. To demonstrate the methodology, the proposed workflow was applied to a prototypical heat pipe-cooled microreactor model. To predict isotopic concentrations (taking into account the ac- cumulation of fission products during operation), the necessary microscopic cross sections were generated via OpenMC and tabulated with respect to temperature and burnup. Next, a recently developed capability in Griffin (the reactor physics application in BlueCRAB) was used to convert the OpenMC output format into the ISOXML format used by Griffin. A multiphysics microscopic depletion calculation that involved performing a coupled full-core, heterogeneous neutron trans- port and thermal calculation at each depletion step was conducted to deplete the core to end of life (EOL) conditions so as to provide both isotopics and the initial condition for the transient calculation. Following a brief null-transient to verify that the initial condition had been properly restarted and was indeed in thermal equilibrium, a heat pipe failure transient was simulated. Thus, the entire workflow of using BlueCRAB to generate MELCOR inputs, from cross-section generation to producing isotopic inventory and power/temperature evolution profiles during transients, is demonstrated. This report also details the identified gaps in the workflow and how they were (for the most part) addressed. Future work should focus on directly including MEL- COR into the workflow by performing a MELCOR calculation using the BlueCRAB-generated input data. In addition, the heat pipe reactor design should be improved so as to reflect more prototypical burnup characteristics at EOL.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2021

Directing reaction pathways via in situ control of active site geometries in PdAu single-atom alloy catalysts

Abstract The atomic scale structure of the active sites in heterogeneous catalysts is central to their reactivity and selectivity. Therefore, understanding active site stability and evolution under different reaction conditions is key to the design of efficient and robust catalysts. Herein we describe theoretical calculations which predict that carbon monoxide can be used to stabilize different active site geometries in bimetallic alloys and then demonstrate experimentally that the same PdAu bimetallic catalyst can be transitioned between a single-atom alloy and a Pd cluster phase. Each state of the catalyst exhibits distinct selectivity for the dehydrogenation of ethanol reaction with the single-atom alloy phase exhibiting high selectivity to acetaldehyde and hydrogen versus a range of products from Pd clusters. First-principles based Monte Carlo calculations explain the origin of this active site ensemble size tuning effect, and this work serves as a demonstration of what should be a general phenomenon that enables in situ control over catalyst selectivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Understanding the interplay between pilot fuel mixing and auto-ignition chemistry in hydrogen-enriched environment

The diesel-piloted dual-fuel compression ignition combustion strategy is well-suited to accelerate the decarbonization of transportation by adopting hydrogen as a renewable energy carrier into the existing internal combustion engine with minimal engine modifications. Despite the simplicity of engine modification, many questions remain unanswered regarding the optimal pilot injection strategy for reliable ignition with minimum pilot fuel consumption. The present study uses a single-cylinder heavy-duty optical engine to explore the phenomenology and underlying mechanisms governing the pilot fuel ignition and the subsequent combustion of a premixed hydrogen-air charge. The engine is operated in a dual-fuel mode with hydrogen premixed into the engine intake charge with a direct pilot injection of n-heptane as a diesel pilot fuel surrogate. Optical diagnostics used to visualize in-cylinder combustion phenomena include high-speed IR imaging of the pilot fuel spray evolution as well as high-speed HCHO* and OH* chemiluminescence as indicators of low-temperature and high-temperature heat release, respectively. Three pilot injection strategies are compared to explore the effects of pilot fuel mass, injection pressure, and injection duration on the probability and repeatability of successful ignition. The thermodynamic and imaging data analysis supported by zero-dimensional chemical kinetics simulations revealed a complex interplay between the physical and chemical processes governing the pilot fuel ignition process in a hydrogen containing charge. Hydrogen strongly inhibits the ignition of pilot fuel mixtures and therefore requires longer injection duration to create zones with sufficiently high pilot fuel concentration for successful ignition. Results show that ignition typically tends to rely on stochastic pockets with high pilot fuel concentration, which results in poor repeatability of combustion and frequent misfiring. In conclusion, this work has improved the understanding on how the unique chemical properties of hydrogen pose a challenge for maximization of hydrogen’s energy share in hydrogen dual-fuel engines and highlights a potential mitigation pathway.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2021

Indexed improvements for real-time trotter evolution of a (1 + 1) field theory using NISQ quantum computers

Today's quantum computers offer the possibility of performing real-time calculations for quantum field theory scattering processes motivated by high energy physics. In order to follow the successful roadmap which has been established for the calculation of static properties at Euclidean time, it is crucial to develop new algorithmic methods to deal with the limitations of current noisy intermediate-scale quantum (NISQ) devices and to establish quantitative measures of the progress made with different devices. In this paper, we report recent progress in these directions. We show that nonlinear aspects of the trotter errors allow us to take much larger step then suggested by low-order analysis. This is crucial to reach physically relevant time scales with today's NISQ technology. We propose to use an index averaging absolute values of the difference between the accurately calculated trotter evolution of site occupations and their actual measurements on NISQ machines (G index) as a measure to compare results that have been obtained from different hardware platforms. Using the transverse Ising model in one spatial dimension with four sites we apply this metric across several hardware platforms. We study the results including readout mitigation and Richardson extrapolations and show that the mitigated measurements are very effective based on the analysis of the trotter step size modifications. Furthermore, we discuss how this advance in the trotter step size procedures can improve quantum computing physics scattering results and how this technical advance can be applied to other machines and noise mitigation methods.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Charge Concentration Limits the Hydrogen Evolution Rate in Organic Nanoparticle Photocatalysts

Colloidal organic nanoparticles have proven to be a promising class of photocatalyst for performing the Hydrogen Evolution Reaction (HER) due to their dispersibility in aqueous environments, their strong absorption within the visible region, and the tunabilty of their component materials' redox potentials. Currently, there is little understanding of how charge generation and accumulation in organic semiconductors change when these materials are formed into nanoparticles that share a high interfacial area with water, nor is it known what mechanism limits the hydrogen evolution efficiency in recent reports on organic nanoparticle photocatalysts. Herein, we use Time-Resolved Microwave Conductivity to study aqueous-soluble organic nanoparticles and bulk thin films composed of various blend ratios of the non-fullerene acceptor EH-IDTBR and conjugated polymer PTB7-Th and examine the relationship between composition, interfacial surface area, charge carrier dynamics, and photocatalytic activity. We quantitatively measure the rate of Hydrogen Evolution Reaction by nanoparticles composed of various donor:acceptor blend ratio compositions and find that the most active blend ratio displays a Hydrogen Quantum Yield of 0.83% per photon. Moreover, we find that nanoparticle photocatalytic activity corresponds directly to charge generation, and that nanoparticles have 3x more long-lived accumulated charges relative to bulk samples of the same material composition. Here these results suggest that, under our current reaction conditions, with approximately 3x solar flux, catalytic activity by these nanoparticles is limited by the concentration of electrons and holes in operando and not a finite number of active surface cites or the catalytic rate at the interface. This provides a clear design goal for the next generation of efficient photocatalytic nanoparticles.

08 HYDROGEN↗
DOE OSTI2024

Plasticity-mediated deformation instabilities in thin film-compliant substrate systems: direct three-dimensional simulations

Abstract Surface wrinkles driven by mechanical instability commonly form in thin-film structures attached to a compliant substrate. In this study, a recently developed computational approach is employed to simulate the formation and transformation of wrinkles involving plastic yielding of the thin film. The three-dimensional (3D) finite element models contain an embedded imperfection at the film-substrate interface, serving to trigger the bifurcation modes. Successful application of this technique to allow for film plasticity is demonstrated, including the evolution of 3D surface patterns and their correlation with the overall load–displacement response. The simulations reveal that plastic yielding transforms the surface instability patterns into more localized forms. Under uniaxial loading, the sinusoidal elastic wrinkles undergo the wrinkle-to-fold transition. With equi-biaxial loading, the initial square-checkerboard array turns into continuous tall ridges along the 45° directions. In both loading modes, the plasticity-induced instability patterns are only partially relieved upon unloading, leaving permanent features on the surface.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Convergent Evolution in Breadth of Two V H 6-1-Encoded Influenza Antibody Clonotypes from a Single Donor

Understanding how broadly neutralizing antibodies (bnAbs) to influenza hemagglutinin (HA) naturally develop in humans is critical to the design of universal influenza vaccines. Several classes of bnAbs directed to the conserved HA stem were found in multiple individuals, including one encoded by heavy-chain variable domain V H 6-1. We describe two genetically similar V H 6-1 bnAb clonotypes from the same individual that exhibit different developmental paths toward broad neutralization activity. One clonotype evolved from a germline precursor recognizing influenza group 1 subtypes to gain breadth to group 2 subtypes. The other clonotype recognized group 2 subtypes and developed binding to group 1 subtypes through somatic hypermutation. Crystal structures reveal that the specificity differences are primarily mediated by complementarity-determining region H3 (CDR H3). Thus, while V H 6-1 provides a framework for development of HA stem-directed bnAbs, sequence differences in CDR H3 junctional regions during VDJ recombination can alter reactivity and evolutionary pathways toward increased breadth.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Entanglement Renormalization for Quantum Field Theories with Discrete Wavelet Transforms

We propose an adaptation of Entanglement Renormalization for quantum field theories that, through the use of discrete wavelet transforms, strongly parallels the tensor network architecture of the Multiscale Entanglement Renormalization Ansatz (a.k.a. MERA). Our approach, called wMERA, has several advantages of over previous attempts to adapt MERA to continuum systems. In particular, (i) wMERA is formulated directly in position space, hence preserving the quasi-locality and sparsity of entanglers; and (ii) it enables a built-in RG flow in the implementation of real-time evolution and in computations of correlation functions, which is key for efficient numerical implementations. As examples, we describe in detail two concrete implementations of our wMERA algorithm for free scalar and fermionic theories in (1+1) spacetime dimensions. Possible avenues for constructing wMERAs for interacting field theories are also discussed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2026

A physically based mechanical model for Mullins effect in thermoplastic polyurethanes

Despite decades of research, connecting the chemical and physical structure of thermoplastic polyurethanes to their mechanical properties remains highly challenging. Of particular note are their large-deformation and rate-dependent behaviors, which vary greatly with molecular chemistry, including the type and relative content of soft and hard segments. In this work, we develop a physically motivated mechanical theory for predicting the behavior of thermoplastic polyurethanes. The theory incorporates a representation of microstructural evolution during mechanical deformation, which captures the signatures of stress softening over cyclic loading (commonly referred to as the Mullins effect). There are only eight physically motivated fitting parameters, including a direct dependence on the hard segment fraction. The model predicts that increasing the hard segment fraction leads to higher stiffness and greater energy dissipation, in quantitative agreement with published experimental data. Furthermore, we provide a comprehensive analysis of the model and validate its predictions across several independent datasets focused on mechanical characterization. Direct comparisons to experimental data demonstrate its predictive capability on the effect of loading rate, cyclic deformations, and applied tension or compression. Altogether, this work establishes a predictive framework that connects polymer chemistry and microstructure to emergent mechanical behaviors.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Porosity evolution in proton irradiated microfine-grained POCO graphite

This work investigated the porosity evolution of POCO ZXF-5Q graphite that has been irradiated by 340 kW, 120 GeV protons inside NT02 target system in Fermilab's NuMI beamline. This POCO graphite has undergone direct bulk dimensional swelling at low dose irradiation and its local microstructural change is still not well-understood during this process. In this work, the (sub-) micrometre scale porosity from six locations across proton beam fluence and temperature gradients have been studied using focused ion beam-scanning electron microscopy (FIB-SEM) tomography. Here, a deep learning-based tomographic image segmentation technique has been established and implemented for porosity segmentation and quantification. It has been found that there is a decrease in the total volumetric percentage of the porosity at proton beam centre (~ 8 – 8.4 vol.%), by comparing to un-irradiated POCO (~ 12 – 13vol.%) and to beam 2σ and 5σ radii (~ 12vol.%). This decrease in porosity volume percentage was found to be caused by the reduction in pores with volumes > 0.1 μm 3 induced by material bulk dimensional swelling at proton beam centre area. The porosity reduction in relation to dimensional change and irradiation creep was discussed among with other contributing factors, and further investigations through well-controlled irradiation experiment are still needed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Quantitative nanoscale tracking of oxygen vacancy diffusion inside single ceria grains by in situ transmission electron microscopy

Oxygen vacancy formation and migration in ceria is critical to its electrochemical and catalytic properties in systems for chemical and energy transformation, but its quantification is rather challenging especially at atomic-scale because of disordered distribution. Here we report a rational approach to track oxygen vacancy diffusion in single grains of pure and Sm-doped ceria at -20 °C to 160 °C using in situ (scanning) transmission electron microscopy ((S)TEM). To create a gradient in oxygen vacancy concentration, a small region (~30 nm in diameter) inside a ceria grain is reduced to the C-type CeO 1.68 phase by the ionization or radiolysis effect of a high-energy electron beam. The evolution in oxygen vacancy concentration is then mapped through lattice expansion measurement using scanning nano-beam diffraction or 4D STEM at a spatial resolution better than 2 nm; this allows direct determination of local oxygen vacancy diffusion coefficients in a very small domain inside pure and Sm-doped ceria at different temperatures. Further, the activation energies for oxygen transport are determined to be 0.59, 0.66, 1.12, and 1.27 eV for pure CeO 2 , Ce 0.94 Sm 0.06 O 1.97 , Ce 0.89 Sm 0.11 O 1.945 , and Ce 0.8 Sm 0.2 O 1.9 , respectively, implying that activation energy increases due to impurity scattering. The results are qualitatively supported by density functional theory (DFT) calculations. In addition, our in situ TEM investigation reveals that dislocations impede oxygen vacancy diffusion by absorbing oxygen vacancies from the surrounding areas and pinning them locally. With more oxygen vacancies absorbed, dislocations show extended strain fields with local tensile zone sandwiched between the compressed ones. Therefore, dislocation density should be reduced in order to minimize the resistance to oxygen vacancy diffusion at low temperatures.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Spatiotemporal mapping of microscopic strains and defects to reveal Li-dendrite-induced failure in all-solid-state batteries

Solid-state electrolytes (SSEs) are key to the success and reliability of all-solid-state lithium batteries, potentially enabling improvements in terms of safety and energy density over state-of-the-art lithium-ion batteries. However, there are several critical challenges to their implementation, including the interfacial instability stemming from the dynamic interaction of as-formed dendritic lithium during cycling. Here, we emphasize the importance of studying the spatial distribution and temporal evolution of strains and defects in crystalline solid-state electrolytes at the micro-scale, and how this affects dendrite growth. A proof-of-principle study is demonstrated using the synchrotron radiation based micro Laue X-ray diffraction method, and a custom-developed in-situ cycling device. Defects and residual strains are mapped, and the evolution of intragranular misorientation is observed. The feasibility of using this technique is discussed, and recommendations for micro-strain engineering to address the Li/SSEs interfacial issues are given. Additionally, work directions are pointed out with the consideration of combining multi-techniques for “poly-therapy”.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Resolving atomic transport through iron oxide under irradiation using isotopic tracers

Structural materials in nuclear environments are exposed to complex and harsh conditions, including high temperatures, corrosive solutions, and irradiation. Material stability and likewise degradation are fundamentally controlled by atomic transport mechanisms. Here, we investigate the influence of radiation-induced, non-equilibrium point defect populations on mass transport within model oxide systems using isotopic tracers and atom probe tomography. An isotopically labelled hematite (a-Fe2O3) film was synthesized with 16O- and 18O-rich layers (>30nm and 10 nm, respectively) sequentially deposited via molecular beam epitaxy. One region of the film was proton irradiated to ~0.1 dpa at 450°C, and regions outside the beam spot provided a non-irradiated control of thermal annealing only. 3D APT was used to directly visualize the elemental and O-isotopic redistribution following both thermal and combined thermal and irradiation conditions. Complementary scanning transmission electron microscopy (STEM) was also employed to study the microstructural evolution. Error function fits of the 18O-concentration profiles enabled quantification of diffusion coefficients.

isotopic tracers, diffusion, proton irradiation, h↗
DOE OSTI2025

Polymorphism and Negative Linear Compressibility in Pyrazine-d4

Pyrazine (1,4-diazine) is a widely used linker in coordination polymers, molecular magnets, and metal–organic frameworks, yet its solid-state polymorphism is controlled by weak C–H···N interactions. Using variable-temperature and high-pressure neutron diffraction, a previously unrecognized low-temperature transition to phase IV is identified, showing that the form stabilized under pressure can also be accessed below ∼90 K at ambient pressure in the perdeuterated compound. The transition from phase III → IV involves a symmetry-breaking lattice distortion driven by the reorganization of C–H···N hydrogen bonds, accompanied by negative linear compressibility, which is primarily accommodated through the reduction in void-space within the structure. Structural analysis reveals that while the overall monoclinic framework of phase IV is preserved under both temperature and pressure routes, the evolution of hydrogen-bonded network is distinct depending on the pathway taken. These results establish pyrazine as a model molecular solid for studying pressure–temperature polymorphism and demonstrate how weak directional interactions can produce anomalous mechanical responses in organic crystals.

Ridley, Christopher J. [Oak Ridge National Laborat↗
DOE OSTI2023

Causal interaction in high frequency turbulence at the biosphere–atmosphere interface: Structural behavior

High-frequency (e.g., 10 Hz) eddy covariance measurements are typically used to estimate fluxes at the land–atmosphere interface at timescales of 15–60 min. These multivariate data contain information about the interdependency at high frequency between the interacting variables such as wind, humidity, temperature, and CO 2⁠ . We use data at 10 Hz from an eddy covariance instrument located at 25 m above agricultural land in the Midwestern US, which offers an opportunity to move beyond the traditional spectral analyses to explore causal dependency among variables. In this study, we quantify the structure of inter-dependencies of interacting variables at high frequency represented by a directed acyclic graph (DAG). We compare DAGs to investigate changes in structural differences in causal interactions. We then apply a distance-based classification and -means clustering approach to identify the evolution of the causal structure represented by a DAG. Our method selects an unbiased number of clusters of similar structures and characterizes the similarities and differences between them. We explore a range of dynamic behavior using data from a clear sky day and during a solar eclipse in 2017. Our results show well-defined clusters of similar causal dependencies as the system evolves. Furthermore, our approach provides a methodological framework to understand how causal dependence in turbulence manifests in high-frequency data when represented through a DAG.

54 ENVIRONMENTAL SCIENCES↗