Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Differential model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

The physics of parallel machines

The idea is considered that architectures for massively parallel computers must be designed to go beyond supporting a particular class of algorithms to supporting the underlying physical processes being modelled. Physical processes modelled by partial differential equations (PDEs) are discussed. Also discussed is the idea that an efficient architecture must go beyond nearest neighbor mesh interconnections and support global and hierarchical communications.

Chan, Tony F.↗

Stochastic time-optimal control problems

Two types of stochastic time-optimal controls in a one-dimensional setting are considered. Multidimensional problems, in the case of complete state information available and the system modeled by stochastic differential equations, are studied under the formulation of minimizing the expected transient-response time. The necessary condition of optimality is the satisfaction for the value function of a parabolic partial differential equation with boundary conditions. The sufficient condition of optimality is also provided, based on Dynkin's formula. Finally, three examples are given.

Zhang, W.↗

Flexure and the role of inplane force around coronae on Venus

Large coronae on Venus, such as Artemis and Latona, are rimmed by conspicuous trenches and associated outer rises. Sandwell and Schubert have observed that these systems resemble terrestrial subduction zones in planform and have succeeded in fitting an elastic plate bending equation to the inferred flexural topography. However, the first zero crossing bending moments required are -2.5 x 10(exp 17) N for Artemis and -5.0 x 10(exp 16) N for Latona. Since these moments are similar in magnitude to those of subducting slabs on Earth, a rollback subduction mechanism was proposed to explain the flexure around the largest coronae, although a differential thermal subsidence model is sufficient to account for the topography around some coronae. The purpose is to investigate the effect of inplane force as a possible alternative to large applied moments in producing flexure at Artemis and Latona. The close correlation of gravity to topography on Venus implies the absence of a low viscosity zone and the strong coupling of the lithosphere to mantle convection. If coronae are the surface manifestations of mantle plumes, they may be the sites of active convective stress coupling. As the upwelling reaches the lithosphere, it spreads radially outward, inducing shear tractions on the base of the plate. In addition, the hot, expanding corona may load the surrounding plate horizonally. Both the basal shear stresses and radial loading can be treated as an equivalent compressive inplane force in the mechanical lithosphere, which contributes to the bending of the outlying plate. Using a model that relates inplane force to the measured gravity anomalies, a rough value of the inplane force at Artemis was calculated. Recent Pioneer Venus spherical harmonic gravity models indicate a geoid anomaly of about 75 m over Artemis, which corresponds to an estimated inplane force on the order of -1x10(exp 13) N/m. The gravity model is unable to resolve Latona, but an inplane force of similar dimensions is assumed. The maximum possible inplane force based on the expected rheology can be constrained by using the approximate 5 K/km thermal gradient inferred from the best fit 30 km elastic plate at Artemis and Latona. For a dry olivine flow law in the upper mantle, the compressional load limit of the 60 km thick mechanical lithosphere is -4 x 10(exp 13) N/m. This value is equivalent to a load of -8 x 10(exp 13) N/m on a 30 km thick elastic plate.

Brown, C. David↗

ASTEC and MODEL: Controls software development at Goddard Space Flight Center

The ASTEC (Analysis and Simulation Tools for Engineering Controls) software is under development at the Goddard Space Flight Center (GSFC). The design goal is to provide a wide selection of controls analysis tools at the personal computer level, as well as the capability to upload compute-intensive jobs to a mainframe or supercomputer. In the last three years the ASTEC (Analysis and Simulation Tools for Engineering Controls) software has been under development. ASTEC is meant to be an integrated collection of controls analysis tools for use at the desktop level. MODEL (Multi-Optimal Differential Equation Language) is a translator that converts programs written in the MODEL language to FORTRAN. An upgraded version of the MODEL program will be merged into ASTEC. MODEL has not been modified since 1981 and has not kept with changes in computers or user interface techniques. This paper describes the changes made to MODEL in order to make it useful in the 90's and how it relates to ASTEC.

Downing, John P.↗

System Simulation by Recursive Feedback: Coupling a Set of Stand-Alone Subsystem Simulations

Conventional construction of digital dynamic system simulations often involves collecting differential equations that model each subsystem, arran g them to a standard form, and obtaining their numerical gin solution as a single coupled, total-system simultaneous set. Simulation by numerical coupling of independent stand-alone subsimulations is a fundamentally different approach that is attractive because, among other things, the architecture naturally facilitates high fidelity, broad scope, and discipline independence. Recursive feedback is defined and discussed as a candidate approach to multidiscipline dynamic system simulation by numerical coupling of self-contained, single-discipline subsystem simulations. A satellite motion example containing three subsystems (orbit dynamics, attitude dynamics, and aerodynamics) has been defined and constructed using this approach. Conventional solution methods are used in the subsystem simulations. Distributed and centralized implementations of coupling have been considered. Numerical results are evaluated by direct comparison with a standard total-system, simultaneous-solution approach.

Nixon, D. D.↗

Building Blocks for Reliable Complex Nonlinear Numerical Simulations

This chapter describes some of the building blocks to ensure a higher level of confidence in the predictability and reliability (PAR) of numerical simulation of multiscale complex nonlinear problems. The focus is on relating PAR of numerical simulations with complex nonlinear phenomena of numerics. To isolate sources of numerical uncertainties, the possible discrepancy between the chosen partial differential equation (PDE) model and the real physics and/or experimental data is set aside. The discussion is restricted to how well numerical schemes can mimic the solution behavior of the underlying PDE model for finite time steps and grid spacings. The situation is complicated by the fact that the available theory for the understanding of nonlinear behavior of numerics is not at a stage to fully analyze the nonlinear Euler and Navier-Stokes equations. The discussion is based on the knowledge gained for nonlinear model problems with known analytical solutions to identify and explain the possible sources and remedies of numerical uncertainties in practical computations. Examples relevant to turbulent flow computations are included.

Yee, H. C.↗

Building Blocks for Reliable Complex Nonlinear Numerical Simulations

This talk describes some of the building blocks to ensure a higher level of confidence in the predictability and reliability (PAR) of numerical simulation of multiscale complex nonlinear problems. The focus is on relating PAR of numerical simulations with complex nonlinear phenomena of numerics. To isolate sources of numerical uncertainties, the possible discrepancy between the chosen partial differential equation (PDE) model and the real physics and/or experimental data is set aside. The discussion is restricted to how well numerical schemes can mimic the solution behavior of the underlying PDE model for finite time steps and grid spacings. The situation is complicated by the fact that the available theory for the understanding of nonlinear behavior of numerics is not at a stage to fully analyze the nonlinear Euler and Navier-Stokes equations. The discussion is based on the knowledge gained for nonlinear model problems with known analytical solutions to identify and explain the possible sources and remedies of numerical uncertainties in practical computations. Examples relevant to turbulent flow computations are included.

Yee, H. C.↗

Reliability of Complex Nonlinear Numerical Simulations

This work describes some of the procedure to ensure a higher level of confidence in the predictability and reliability (PAR) of numerical simulation of multiscale complex nonlinear problems. The focus is on relating PAR of numerical simulations with complex nonlinear phenomena of numerics. To isolate sources of numerical uncertainties, the possible discrepancy between the chosen partial differential equation (PDE) model and the real physics and/or experimental data is set aside. The discussion is restricted to how well numerical schemes can mimic the solution behavior of the underlying PDE model for finite time steps and grid spacings. The situation is complicated by the fact that the available theory for the understanding of nonlinear behavior of numerics is not at a stage to fully analyze the nonlinear Euler and Navier-Stokes equations. The discussion is based on the knowledge gained for nonlinear model problems with known analytical solutions to identify and explain the possible sources and remedies of numerical uncertainties in practical computations. Examples relevant to turbulent flow computations are included.

Yee, H. C.↗

Building Blocks for Reliable Complex Nonlinear Numerical Simulations

This chapter describes some of the building blocks to ensure a higher level of confidence in the predictability and reliability (PAR) of numerical simulation of multiscale complex nonlinear problems. The focus is on relating PAR of numerical simulations with complex nonlinear phenomena of numerics. To isolate sources of numerical uncertainties, the possible discrepancy between the chosen partial differential equation (PDE) model and the real physics and/or experimental data is set aside. The discussion is restricted to how well numerical schemes can mimic the solution behavior of the underlying PDE model for finite time steps and grid spacings. The situation is complicated by the fact that the available theory for the understanding of nonlinear behavior of numerics is not at a stage to fully analyze the nonlinear Euler and Navier-Stokes equations. The discussion is based on the knowledge gained for nonlinear model problems with known analytical solutions to identify and explain the possible sources and remedies of numerical uncertainties in practical computations.

Yee, H. C.↗

Comparison of Spacecraft Charging Environments at the Earth, Jupiter, and Saturn

Studies of the Earth with the ATS-5, ATS-6, and SCATHA spacecraft led to the development of several simple tools for predicting the potentials to be expected on a spacecraft in the space environment. These tools have been used to estimate the expected levels of worst case charging at Jupiter and Saturn for the Galileo and the Cassini spacecraft missions. This paper reviews those results and puts them in the context of the design issues addressed by each mission including the spacecraft design mitigation strategies adopted to limit differential charging. The model shows that shadowed surfaces in Earth orbit can reach 25 kV or higher in worst case environments. For Galileo, spacecraft- to-space potentials of 900 V were predicted in shadow. Since such potentials could produce possible discharges and could effect low energy plasma measurements, the outer surface of Galileo was designed to rigid conductivity requirements. Even though the surface of Galileo is not entirely conducting, after 27 orbits no adverse effects due to surface charging aside from limited effects on low energy plasma measurements have been reported. The saturnian environment results in spacecraft potentials to space in shadow of 100 V or less. Although the overall surface of the Cassini spacecraft was not entirely conducting and grounded, it is shown that only in the most extreme conditions, is it expected that Cassini will experience any effects of surface charging at Saturn.

plasma environments↗

Rapid Switching and Modulation by use of Coupled VCSELs

Devices incorporating coupled vertical-cavity surface-emitting lasers (VCSELs) have been proposed as means to effect unprecedentedly rapid modulation and/or switching of light beams in advanced optical communication and information-processing systems. A basic device according to the proposal would comprise two or more VCSELs (1) positioned so close to each other that they are coupled and (2) connected to a current source that biases them at a steady current above the threshold current for lasing. The operation of VCSELs under the conditions stated above has been simulated computationally with an algorithm that solves an approximation of the Maxwell-Bloch equations. (These are nonlinear coupled partial differential equations that model the relevant aspects of the physics of semiconductor lasers.) The results of the simulations show that the intensities of the beams oscillate, out of phase relative to each other, at a frequency that is typically of the order of tens of gigahertz. In particular, one simulation was performed for two coupled VCSELs, each having a circular aperture 5.6 microns in diameter, operating at a wavelength of 980 nm. The results of the simulation showed that the intensities of the two beams oscillated in opposite phase (see Figure 1) at a frequency of 42 GHz. In the far field, the beams were found to be separated by an angle of approx.=8deg. The intensities of the beams were also found to oscillate in the near field, 90deg out of phase with the oscillation in the far field. Figure 2 depicts a simple near-field switching device in which an assembly of microlenses would couple the two oscillating beams to two receivers.

Goorjian, Peter M.↗

Feldspathic Meteorites MIL 090034 and 090070: Late Additions to the Lunar Crust

Our studies of the Miller Range lunar meteorites MIL 090034, 090036, and 090070 show them to be a diverse suite of rocks from the lunar highlands hereafter referred to as MIL 34, MIL 36, and MIL 70, resp. MIL34 and MIL70, the focus of this work, are crystalline melt breccias. Plagioclase compositions in both peak sharply around An96-97. Mg numbers of olivine vary from 58-65 with a few higher values. MIL36 is a regolith breccia. MIL 34 and MIL 70 have some of the highest Al2O3 abundances of lunar highland meteorites, indicating that they have among the largest modal abundances of plagioclase for lunar meteorites. They have lower Sc and Cr abundances than nearly all lunar highland meteorites except Dho 081, Dho 489 and Dho 733. MIL34 and MIL70 also have similar cosmic ray exposure (CRE) ages of approximately 1-2 Ma indicating they are launch paired. (MIL36 has a larger CRE age approximately greater than 70 Ma). Park et al. found a variation in Ar-Ar ages among subsamples of MIL 34 and MIL70, but preferred ages of 3500+/-110 Ma for the "Dark" phase of MIL 34 anorthite and 3520+/-30 Ma for the "Light" phase of MIL70. Bouvier et al. reported a Pb-Pb age of 3894+/-39 Ma for a feldspathic clast of MIL 34 and a similar age for a melt lithology. Here we reexamine the Rb-Sr and Sm-Nd isotopic data, which show complexities qualitatively consistent with those of the Ar-Ar and Pb-Pb data. The Sm-Nd data in particular suggest that the feldspathic compositions of MIL 34 and MIL 70 formed during initial lunar geochemical differentiation, and REE modeling suggests a relatively late-stage formation.

Nyquist, L. E.↗

The Role of Gravity Mechanotransduction in Regulating Stem Cell Tissue Regenerative Potential at the Single Cell Expressome Level

Gravity is an omnipresent force on Earth, and all living organisms have evolved under the influence of constant gravity. Mechanical forces generated by gravity are potent modulators of stem cell based tissue regenerative mechanisms, inducing cell fate decisions and tissue specific commitment. A novel mechanical unloading investigation assessed the formation, morphology, and gene expression of embryoid bodies (EB), a transitory cell model of early differentiation. After 15 days of spaceflight, the mechanotransduction-null EB cells showed upregulated proliferative mechanisms while differentiation cues were silenced.

Juran, Cassandra M.↗

Percolative Sulfide Core Formation in Oxidized Meteorite Parent Bodies

Most models of planetary differentiation involve the formation of metallic cores during or after extensive silicate melting, but some volatile-rich reservoirs in the protoplanetary disk did not accrete substantial amounts of Fe,Ni-metal. Instead, their potential core-forming assemblages were dominated by Fe,Ni-sulfides and oxides due to high ƒ O 2 and ƒ S 2 . Derivative melts from these assemblages may have been capable of percolative migration leading to core formation prior to silicate melting. However, no direct evidence for this process has been reported in meteoritic literature. Similarly, while many iron meteorites are thought to represent cores of their respective parent bodies, no direct evidence for Fe,Ni-sulfide/oxide cores have been reported to-date. The most promising potential for such evidence may be found in the anomalous noble metal trace element proportions of restitic oxidized primitive achondrites (i.e., brachinites, log ƒ O 2 ~IW-1), which are similar to those found in sulfides of Rumuruti-type chondrites (RCs) that contain only trace amounts of Fe,Ni-metal at log ƒ O 2 ≥ IW-1. This work addresses the following outstanding questions: (1) Are molten sulfides in oxidized meteorite assemblages capable of percolative melt migration? (2) How is this process recorded in the noble metal (i.e., siderophile/chalcophile) trace element geochemistry of relevant meteorites? (3) Did O,S-rich meteorite parent bodies form sulfide cores?

S. D. Crossley↗

Differential credibility assessment for statistical downscaling

Climate science is increasingly using (i) ensembles of climate projections from multiple models derived using different assumptions and/or scenarios and (ii) process-oriented diagnostics of model fidelity. Efforts to assign differential credibility to projections and/or models are also rapidly advancing. A framework to quantify and depict the credibility of statistically downscaled model output is presented and demonstrated. Here, the approach employs transfer functions in the form of robust and resilient generalized linear models applied to downscale daily minimum and maximum temperature anomalies at 10 locations using predictors drawn from ERA-Interim reanalysis and two global climate models (GCM; GFDL-ESM2M and MPI-ESM-LR). The downscaled time series are used to derive several impact relevant CLIMDEX temperature indices that are assigned credibility based on (1) the reproduction of relevant large-scale predictors by the GCMs (i.e. fraction of regression beta-weights derived from predictors that are well-reproduced) and (2) the degree of variance in the observations reproduced in the downscaled series following application of a new variance inflation technique. Credibility of the downscaled predictands varies across locations, between the two GCM and is generally higher for minimum temperature than maximum temperature. The differential credibility assessment framework demonstrated here is easy to use and flexible. It can be applied as is to inform decision makers regarding projection confidence, and/or extended to include other components of the transfer functions, and/or used to weight members of a statistically downscaled ensemble.

54 ENVIRONMENTAL SCIENCES↗

Cosmological perturbations in f(T) gravity

We investigate the cosmological perturbations in f(T) gravity. Examining the pure gravitational perturbations in the scalar sector using a diagonal vierbein, we extract the corresponding dispersion relation, which provides a constraint on the f(T) Ansaetze that lead to a theory free of instabilities. Additionally, upon inclusion of the matter perturbations, we derive the fully perturbed equations of motion, and we study the growth of matter overdensities. We show that f(T) gravity with f(T) constant coincides with General Relativity, both at the background as well as at the first-order perturbation level. Applying our formalism to the power-law model we find that on large subhorizon scales (O(100 Mpc) or larger), the evolution of matter overdensity will differ from {Lambda}CDM cosmology. Finally, examining the linear perturbations of the vector and tensor sectors, we find that (for the standard choice of vierbein) f(T) gravity is free of massive gravitons.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Robust Data-Driven Predictive Run-to-Run Control for Automated Serial Sectioning

This letter presents a one-step predictive run-to-run controller (R2R-MPC) for the automation of mechanical serial sectioning (MSS), a destructive material analysis process. To address the inherent uncertainty and disturbances in the MSS process, a robust closed-loop approach is presented. Here, the robust R2R-MPC models the uncertainty of the MSS process using a linear differential inclusion. As an analytical model of the MSS process is unavailable, the differential inclusion is identified from historical data. The R2R-MPC is posed as an optimization problem that computes incremental changes to the control input which minimize the worst-case material removal errors. This optimization-based controller is combined with a run-to-run controller to provide integral action that rejects constant disturbances and tracks constant reference removal rates. To demonstrate the efficacy of our robust R2R-MPC, we present simulation results which compare the presented controller with a conventional non-robust R2R.

42 ENGINEERING↗